Le reflux gastro-oesophagien de l'enfant: indications chirurgicales, techniques et suivi.

Contexte: Présent sous forme physiologique chez environ 60% des nourrissons normaux de moins de quatre mois, le reflux gastro-oesophagien (RGO) n'est symptomatique que chez 10% d'entre eux. Il est également plus fréquent chez les enfants atteints de troubles neurologiques quelque soit leur âge. Non traité, il peut avoir des conséquences graves (oesophagite, sténose peptique, endobrachyoesophage (Barrett) puis adénocarcinome de l'oesophage). Il s'agit donc d'un problème qu'il faut savoir détecter et traiter précocement. Les signes et symptômes du RGO sont multiples et varient en fonction de l'âge. Ils ne se limitent pas au seul vomissement. Le traitement initial du RGO chez l'enfant est médical. En cas d'échec de celui-ci ou dans certaines indications (comme les RGO récidivants, les malformations congénitales, les anomalies morphologiques ou les pathologies neurologiques) un traitement chirurgical est nécessaire. L'évolution des traitements conservateurs et des techniques chirurgicales lors de ces dernières années en font un bon sujet pour une étude rétrospective. Objectif: Le but de cette étude est de mettre en évidence dans une population d'enfants ayant bénéficié d'une cure chirurgicale anti-reflux la fréquence relative des symptômes selon la pathologie initiale de l'enfant, puis de préciser le choix de traitement et sa durée. Nous analyserons également les risques d'échec qui s'y rapportent. Ces conclusions devraient nous permettre de proposer un algorithme décisionnel de prise en charge du RGO de l'enfant en pré et post-opératoire. Méthodologie: Étude rétrospective sur 9 ans se basant sur les dossiers médicaux-chirurgicaux de 132 enfants opérés d'un reflux gastro-oesophagien dans le Service de Chirurgie Pédiatrique du Centre Hospitalier Universitaire Vaudois (CHUV) par le Professeur Olivier Reinberg et son équipe entre le 1er janvier 2003 et le 31 décembre 2012. Résultats: Sur les 132 enfants, 93 ont bénéficié d'une fundoplicature selon Toupet, 34 selon Nissen et 5 selon Dor. 57% des enfants présentant un déficit neurologique ont été opérés selon la technique de Nissen contre 7% des enfants "sains". Les taux de démontage et de récidive sont respectivement 5.4% et 3.5 % pour la technique selon Toupet et 2.9% et 0% pour la technique de Nissen. Le taux de démontage global de la fundoplicature est de 4.6% (N=6) Conclusions: La fundoplicature est une méthode de choix pour les enfants chez qui tous les autres traitements ont échoué ou chez qui la présence concomitante du RGO et des comorbidités est délétère à une croissance harmonieuse. Grâce à la chirurgie, la qualité de vie d'au moins 95% des enfants est grandement améliorée après la disparition de symptômes quotidiens et qui peuvent donner lieu à des complications graves.

DAI-DEPUR: an integrated and distributed architecture for wastewater treatment plants supervision

The activated sludge process - the main biological technology usually applied towastewater treatment plants (WWTP) - directly depends on live beings (microorganisms), and therefore on unforeseen changes produced by them. It could be possible to get a good plant operation if the supervisory control system is able to react to the changes and deviations in the system and can take thenecessary actions to restore the system’s performance. These decisions are oftenbased both on physical, chemical, microbiological principles (suitable to bemodelled by conventional control algorithms) and on some knowledge (suitable to be modelled by knowledge-based systems). But one of the key problems in knowledge-based control systems design is the development of an architecture able to manage efficiently the different elements of the process (integrated architecture), to learn from previous cases (spec@c experimental knowledge) and to acquire the domain knowledge (general expert knowledge). These problems increase when the process belongs to an ill-structured domain and is composed of several complex operational units. Therefore, an integrated and distributed AIarchitecture seems to be a good choice. This paper proposes an integrated and distributed supervisory multi-level architecture for the supervision of WWTP, that overcomes some of the main troubles of classical control techniques and those of knowledge-based systems applied to real world systems

The Pelosi-type versus the modified Misgav-Ladach: a randomized trial of two surgical techniques for cesarean section

Cesarean section (CS) is now the most common major surgical procedure performed on women worldwide. A quarter of deliveries in Spain are performed by cesarean section. With the increasing rates of the operation, there is the need to use evidence-based techniques to optimize outcomes and minimize complications. The goal of this study is to employ a well-designed randomized controlled trial to evaluate the intraoperative blood loss of two surgical techniques for cesarean section, the Pelosi-type and the modified Misgav-Ladach. The trial will take place in Hospital Universitari de Girona Dr. Josep Trueta From 2014 to 2015, 512 pregnant women undergoing delivery by their first lower segment cesarean section in this center will be selected through a consecutive nonprobability sampling. We will collect the main obstetrical characteristics, intraoperative outcomes, short-term outcomes for the baby and postoperative outcomes. We will evaluate the intraoperative blood loss by comparing the changes in hemoglobin levels, pre and postoperatively. Patients will be followed during the postoperative period and in a two-week postoperative appointment. We will analyze the continuous variables, such as the differences in hemoglobin levels, using an unpaired two-sided Student’s t-test, while for the categorical variables Fischer’s exact test will be used

Overvoltage Mitigation Techniques in Wind Power Generators

Advancements in power electronic semiconductor switching devices have lead to significantly faster switching times. In motor and generator applications, the fast switching times of pulse width modulated (PWM) inverters lead to overvoltages caused by voltage reflections with shorter and shorter cables. These excessive overvoltages may lead to a failure of the electrical machine in a matter of months. In this thesis, the causes behind the overvoltage phenomenon as well as its different mitigation techniques are studied. The most suitable techniques for mitigating the overvoltage phenomenon in wind power generator applications are chosen based on both simulations and actual measurements performed on a prototype. An RC filter at the terminals of the electrical machine and an inverter output filter designed to reduce the rise and fall times of voltage pulses are presented as a solution to the overvoltage problem. The performance and losses of both filter types are analysed.

Alternative Techniques of Neural Signal Processing in Neuroengineering

Neural signal processing is a discipline within neuroengineering. This interdisciplinary approach combines principles from machine learning, signal processing theory, and computational neuroscience applied to problems in basic and clinical neuroscience. The ultimate goal of neuroengineering is a technological revolution, where machines would interact in real time with the brain. Machines and brains could interface, enabling normal function in cases of injury or disease, brain monitoring, and/or medical rehabilitation of brain disorders. Much current research in neuroengineering is focused on understanding the coding and processing of information in the sensory and motor systems, quantifying how this processing is altered in the pathological state, and how it can be manipulated through interactions with artificial devices including brain–computer interfaces and neuroprosthetics.

Computational Techniques for Spectral Image Analysis

Multispectral images are becoming more common in the field of remote sensing, computer vision, and industrial applications. Due to the high accuracy of the multispectral information, it can be used as an important quality factor in the inspection of industrial products. Recently, the development on multispectral imaging systems and the computational analysis on the multispectral images have been the focus of a growing interest. In this thesis, three areas of multispectral image analysis are considered. First, a method for analyzing multispectral textured images was developed. The method is based on a spectral cooccurrence matrix, which contains information of the joint distribution of spectral classes in a spectral domain. Next, a procedure for estimating the illumination spectrum of the color images was developed. Proposed method can be used, for example, in color constancy, color correction, and in the content based search from color image databases. Finally, color filters for the optical pattern recognition were designed, and a prototype of a spectral vision system was constructed. The spectral vision system can be used to acquire a low dimensional component image set for the two dimensional spectral image reconstruction. The data obtained by the spectral vision system is small and therefore convenient for storing and transmitting a spectral image.

Análises quali- e quantitativa de cafés comerciais via ressonância magnética nuclear

Coffee is one of the beverages most widely consumed in the world and the "cafezinho" is normally prepared from a blend of roasted powder of two species, Coffea arabica and Coffea canephora. Each one exhibits differences in their taste and in the chemical composition, especially in the caffeine percentage. There are several procedures proposed in the literature for caffeine determination in different samples like soft drinks, coffee, medicines, etc but most of them need a sample workup which involves at least one step of purification. This work describes the quantitative analysis of caffeine using ¹H NMR and the identification of the major components in commercial coffee samples using 1D and 2D NMR techniques without any sample pre-treatment.

Characterization and Control Strategies of an Integrated Chemical-Biological System for the Remediation of Toxic Pollutants in Wastewater: A case of study

In a previous work, a hybrid system consisting of an advanced oxidation process (AOP) named Photo-Fenton (Ph-F) and a fixed bed biological treatment operating as a sequencing batch biofilm reactor (SBBR) was started-up and optimized to treat 200 mg·L-1 of 4-chlorophenol (4-CP) as a model compound. In this work, studies of reactor stability and control as well as microbial population determination by molecular biology techniques were carried out to further characterize and control the biological reactor. Results revealed that the integrated system was flexible and even able to overcome toxic shock loads. Oxygen uptake rate (OUR) in situ was shown to be a valid tool to control the SBBR operation, to detect toxic conditions to the biomass, and to assess the recovery of performance. A microbial characterization by 16S rDNA sequence analysis reveals that the biological population was varied, although about 30% of the bacteria belonged to the Wautersia genus.

Extraction, purification and biochemical characterization of a peroxidase from Copaifera langsdorffii leaves

The aim of this work is to obtain, purify and characterize biochemically a peroxidase from Copaifera langsdorffii leaves (COP). COP was obtained by acetone precipitation followed by ion-exchange chromatography. Purification yielded 3.5% of peroxidase with the purification factor of 46.86. The COP optimum pH is 6.0 and the temperature is 35 ºC. COP was stable in the pH range of 4.5 to 9.3 and at temperatures below 50.0 ºC. The apparent Michaelis-Menten constants (Km) for guaiacol and H2O2 were 0.04 mM and 0.39 mM respectively. Enzyme turnover was 0.075 s-1 for guaiacol and 0.28 s-1 for hydrogen peroxide. Copaifera langsdorffii leaves showed to be a rich source of active peroxidase (COP) during the whole year. COP could replace HRP, the most used peroxidase, in analytical determinations and treatment of industrial effluents at low cost.

Review of Robust Cooperative Spectrum Sensing Techniques for Cognitive Radio Networks

Cognitive radio networks sense spectrum occupancy and manage themselvesto operate in unused bands without disturbing licensed users. The detection capability of aradio system can be enhanced if the sensing process is performed jointly by a group of nodesso that the effects of wireless fading and shadowing can be minimized. However, taking acollaborative approach poses new security threats to the system as nodes can report falsesensing data to reach a wrong decision. This paper makes a review of secure cooperativespectrum sensing in cognitive radio networks. The main objective of these protocols is toprovide an accurate resolution about the availability of some spectrum channels, ensuring thecontribution from incapable users as well as malicious ones is discarded. Issues, advantagesand disadvantages of such protocols are investigated and summarized.

Chelating Adsorbents in Purification of Hydrometallurgical Solutions

In this thesis, equilibrium and dynamic sorption properties of weakly basic chelating adsorbents were studied to explain removal of copper, nickel from a concentrated zinc sulfate solution in a hydrometallurgical process. Silica-supported chelating composites containing either branched poly(ethyleneimine) (BPEI) or 2-(aminomethyl)pyridine (AMP) as a functional group were used. The adsorbents are commercially available from Purity Systems Inc, USA as WP-1® and CuWRAM®, respectively. The fundamental interactions between the adsorbents, sulfuric acid and metal sulfates were studied in detail and the results were used to find the best conditions for removal of copper and nickel from an authentic ZnSO4 process solution. In particular, the effect of acid concentration and temperature on the separation efficiency was considered. Both experimental and modeling aspectswere covered in all cases. Metal sorption is considerably affected by the chemical properties of the studied adsorbents and by the separation conditions. In the case of WP-1, acid affinity is so high that column separation of copper, nickel and zinc has to be done using the adsorbent in base-form. On the other hand, the basicity of CuWRAM is significantly lower and protonated adsorbent can be used. Increasing temperature decreases the basicity and the metals affinity of both adsorbents, but the uptake capacities remain practically unchanged. Moreover, increasing temperature substantially enhances intra-particle mass transport and decreases viscosities thus allowing significantly higher feed flow rates in the fixed-bed separation. The copper selectivity of both adsorbents is very high even in the presence of a 250-fold excess of zinc. However, because of the basicity of WP-1, metal precipitation is a serious problem and therefore only CuWRAM is suitable for the practical industrial application. The optimum temperature for copper removal appears to be around 60 oC and an alternative solution purification method is proposed. The Ni/Zn selectivity of both WP-1 and CuWRAM is insufficient for removal of the very small amounts of nickel present in the concentrated ZnSO4 solution.

Color ad spectral image assessment using novel quality and fidelity techniques

The ongoing development of the digital media has brought a new set of challenges with it. As images containing more than three wavelength bands, often called spectral images, are becoming a more integral part of everyday life, problems in the quality of the RGB reproduction from the spectral images have turned into an important area of research. The notion of image quality is often thought to comprise two distinctive areas – image quality itself and image fidelity, both dealing with similar questions, image quality being the degree of excellence of the image, and image fidelity the measure of the match of the image under study to the original. In this thesis, both image fidelity and image quality are considered, with an emphasis on the influence of color and spectral image features on both. There are very few works dedicated to the quality and fidelity of spectral images. Several novel image fidelity measures were developed in this study, which include kernel similarity measures and 3D-SSIM (structural similarity index). The kernel measures incorporate the polynomial, Gaussian radial basis function (RBF) and sigmoid kernels. The 3D-SSIM is an extension of a traditional gray-scale SSIM measure developed to incorporate spectral data. The novel image quality model presented in this study is based on the assumption that the statistical parameters of the spectra of an image influence the overall appearance. The spectral image quality model comprises three parameters of quality: colorfulness, vividness and naturalness. The quality prediction is done by modeling the preference function expressed in JNDs (just noticeable difference). Both image fidelity measures and the image quality model have proven to be effective in the respective experiments.