The odometer regulation and enforcement process: a systems analysis of the state of Maryland and a proposed study design for a demonstration project. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Project Right of Way : development of a transportation cooperative in Boston, MA /

"UMTA Technical Assistance Program."

Piloted flight simulation study of low-level wind shear : phase 2 : all weather landing systems, engineering services support project, task 2 /

Includes bibliographical references.

A comparison between capillary and imaging techniques for sizing bubbles in flotation systems

This communication reports a laboratory and plant comparison between the University of Cape Town (UCT) device (capillary) and the McGill University bubble sizing method (imaging). The laboratory work was conducted on single bubbles to establish the accuracy of the techniques by comparing with a reference method (capture in a burette). Single bubble measurements with the McGill University technique showed a tendency to slightly underestimate (4% for a 1.3 mm bubble) and the UCT technique to slightly overestimate (1% for the 1.3 man bubble). Both trends are anticipated from fundamental considerations. In the UCT technique bubble breakup was observed when measuring a 2.7 mm bubble using a 0.5 mm ID capillary tube. A discrepancy of 11% was determined when comparing the techniques in an industrial-scale mechanical flotation cell. The possible sources of bias are discussed. (C) 2003 Elsevier Ltd. All rights reserved.

Evaluating the Appropriateness of Project Delivery Systems for Different Trenchless Methods

Trenchless methods have been considered to be a viable solution for pipeline projects in urban areas. Their applicability in pipeline projects is expected to increase with the rapid advancements in technology and emerging concerns regarding social costs related to trenching methods. Selecting appropriate project delivery system (PDS) is a key to the success of trenchless projects. To ensure success of the project, the selected project delivery should be tailored to trenchless project specific characteristics and owner needs, since the effectiveness of project delivery systems differs based on different project characteristics and owners requirements. Since different trenchless methods have specific characteristics such rate of installation, lengths of installation, and accuracy, the same project delivery systems may not be equally effective for different methods. The intent of this paper is to evaluate the appropriateness of different PDS for different trenchless methods. PDS are examined through a structured decision-making process called Fuzzy Delivery System Selection Model (FDSSM). The process of incorporating the impacts of: (a) the characteristics of trenchless projects and (b) owners’ needs in the FDSSM is performed by collecting data using questionnaires deployed to professionals involved in the trenchless industry in order to determine the importance of delivery systems selection attributes for different trenchless methods, and then analyzing this data. The sensitivity of PDS rankings with respect to trenchless methods is considered in order to evaluate whether similar project delivery systems are equally effective in different trenchless methods. The effectiveness of PDS with respect to attributes is defined as follows: a project delivery system is most effective with respect to an attribute (e.g., ability to control growth in costs ) if there is no project delivery system that is more effective than that PDS. The results of this study may assist trenchless project owners to select the appropriate PDS for the trenchless method selected.

The significant role of third-party logistics (3pl) operators as fosterers of organizational performance in colombian companies

La eliminación de barreras entre países es una consecuencia que llega con la globalización y con los acuerdos de TLC firmados en los últimos años. Esto implica un crecimiento significativo del comercio exterior, lo cual se ve reflejado en un aumento de la complejidad de la cadena de suministro de las empresas. Debido a lo anterior, se hace necesaria la búsqueda de alternativas para obtener altos niveles de productividad y competitividad dentro de las empresas en Colombia, ya que el entorno se ha vuelto cada vez más complejo, saturado de competencia no sólo nacional, sino también internacional. Para mantenerse en una posición competitiva favorable, las compañías deben enfocarse en las actividades que le agregan valor a su negocio, por lo cual una de las alternativas que se están adoptando hoy en día es la tercerización de funciones logísticas a empresas especializadas en el manejo de estos servicios. Tales empresas son los Proveedores de servicios logísticos (LSP), quienes actúan como agentes externos a la organización al gestionar, controlar y proporcionar actividades logísticas en nombre de un contratante. Las actividades realizadas pueden incluir todas o parte de las actividades logísticas, pero como mínimo la gestión y ejecución del transporte y almacenamiento deben estar incluidos (Berglund, 2000). El propósito del documento es analizar el papel de los Operadores Logísticos de Tercer nivel (3PL) como promotores del desempeño organizacional en las empresas colombianas, con el fin de informar a las MIPYMES acerca de los beneficios que se obtienen al trabajar con LSP como un medio para mejorar la posición competitiva del país.

Contribución de la misión de naciones unidas en Guatemala – Minugua, a la promoción, defensa y garantía de los derechos de la población indígena guatemalteca (1994 a 2004)

El conflicto armado en Guatemala se originó por el abuso de poder, la desigualdad, la exclusión y la profunda discriminación, sobre todo hacia la población indígena, a la que se le han desconocido históricamente sus derechos y que fue la más afligida durante el conflicto. Lo que desembocó en el nacimiento de grupos al margen de la ley, cuyo propósito fue reivindicar los derechos de la población, así como la equidad y justicia social. El conflicto se caracterizó por la formación de grupos paramilitares, la violación al Derecho Internacional Humanitario, el elevado número de víctimas del conflicto, mayoritariamente indígenas y porque más del 85% de las violaciones a los derechos humanos fueron perpetradas por el Estado. Gracias a la voluntad política, al respaldo de la comunidad internacional, especialmente de la Organización de Naciones Unidas -ONU, y a los buenos oficios de la Comisión Nacional de Reconciliación – CNR, se lograron firmar los Acuerdos de Paz y dar fin a este cruento conflicto de más de 36 años. Las partes firmantes vieron la necesidad de que un ente autónomo e imparcial de Naciones Unidas, verificara el cumplimiento de La Misión de Naciones Unidas en Guatemala - MINUGUA contribuyó a la promoción, defensa y garantía de los derechos de la población indígena guatemalteca. Específicamente, incidió en el cumplimiento de los compromisos contenidos en el Acuerdo sobre Identidad y Derechos de los Pueblos Indígenas guatemaltecos –AIDPI, que fue suscrito el 31 de marzo de 1995, asimismo, contribuyó a la garantía del derecho a la justicia de la población indígena, lo que se evidenció en las acciones y el papel que desempeñó en los componentes de verdad, justicia y reparación.

Elastic scattering and total reaction cross sections for the (8)B, (7)Be, and (6)Li+(12)C systems

Angular distributions for the elastic scattering of (8)B, (7)Be, and (6)Li on a (12)C target have been measured at E(lab) = 25.8, 18.8, and 12.3 MeV, respectively. The analyses of these angular distributions have been performed in terms of the optical model using Woods-Saxon and double-folding type potentials. The effect of breakup in the elastic scattering of (8)B + (12)C is investigated by performing coupled-channels calculations with the continuum discretized coupled-channel method and cluster-model folding potentials. Total reaction cross sections were deduced from the elastic-scattering analysis and compared with published data on elastic scattering of other weakly and tightly bound projectiles on (12)C, as a function of energy. With the exception of (4)He and (16)O, the data can be described using a universal function for the reduced cross sections.

Entangled States and Collective Nonclassical Effects in Two-Atom Systems

We propose a review of recent developments on entanglement and nonclassical effects in collective two-atom systems and present a uniform physical picture of the many predicted phenomena. The collective effects have brought into sharp focus some of the most basic features of quantum theory, such as nonclassical states of light and entangled states of multiatom systems. The entangled states are linear superpositions of the internal states of the system which cannot be separated into product states of the individual atoms. This property is recognized as entirely quantum-mechanical effect and have played a crucial role in many discussions of the nature of quantum measurements and, in particular, in the developments of quantum communications. Much of the fundamental interest in entangled states is connected with its practical application ranging from quantum computation, information processing, cryptography, and interferometry to atomic spectroscopy.

Finger and A-B ridge count, and fluctuating asymmetry in psychosis: A catchment area case-control study

Dermatoglyphic measures are of interest to schizophrenia research because they serve as persistent markers of deviant development in foetal life. Several studies have reported alterations in A–B ridge counts, total finger ridge counts and measures related to asymmetry in schizophrenia. The aim of this study was to assess these measures in an Australian catchment area, case-control study. Individuals with psychosisŽns246.were drawn from a catchment-area prevalence study, and well controlsŽns229. were recruited from the same area. Finger and palm prints were taken usingan inkless technique and all dermatoglyphic measures were assessed by a trained rater blind to case status. The dermatoglyphic measures Žfinger ridge count, A–B ridge count, and their derived asymmetry measures. were divided into quartiles based on the distribution of these variables in controls. The main analysis Žlogistic regression controlled for age and sex.examined all psychotic disorders, with planned subgroup analyses comparing controls with Ž1. nonaffective psychosis Žschizophrenia, delusional disorder, schizophreniform psychosis, atypical psychosis.andŽ2. affective psychosis Ždepression with psychosis, bipolar disorder, schizoaffective psychosis.. There were no statistically significant alterations in the odds of havinga psychotic disorder for any of the dermatoglyphic measures. The results did not change when we examined affective and nonaffective psychosis separately. The dermatoglyphic features that distinguish schizophreniar psychosis in other studies were not identified in this Australian study. Regional variations in these findings may provide clues to differential ethnicrgenetic and environmental factors that are associated with schizophrenia. The Stanley Foundation supported this project.

Computer simulations of coupled problems in geological and geochemical systems

The finite element method is used to simulate coupled problems, which describe the related physical and chemical processes of ore body formation and mineralization, in geological and geochemical systems. The main purpose of this paper is to illustrate some simulation results for different types of modelling problems in pore-fluid saturated rock masses. The aims of the simulation results presented in this paper are: (1) getting a better understanding of the processes and mechanisms of ore body formation and mineralization in the upper crust of the Earth; (2) demonstrating the usefulness and applicability of the finite element method in dealing with a wide range of coupled problems in geological and geochemical systems; (3) qualitatively establishing a set of showcase problems, against which any numerical method and computer package can be reasonably validated. (C) 2002 Published by Elsevier Science B.V.

α′ phase stability in Nd-Li-sialon systems

The formability and stability of the alpha-sialon (alpha') phase was investigated in multi-cation Nd-Li-sialon systems. Four samples were prepared, ranging from a pure Nd-sialon to a pure Li-sialon, with two intermediate samples being prepared with either lithium or neodymium replacing the other alpha'-stabilising additive by 20 eq.%, as to maintain an equivalent design composition in all samples. After sintering, all samples were subsequently heat treated up to 192 h at 1450 and 1300 degreesC. While significant quantities of the beta'-sialon (beta' phase were found in most samples, the high-lithium Li-Nd-sialon sample was found to be almost pure a' phase after sintering. Furthermore, the long-term stability of the a' phase on heat treatment was also found to be superior in both multi-cation samples than in either of the single-alpha'-stabilising-cation samples. This is thought to be related to improved retention of the lithium in the multi-cation systems, as much of the lithium was found to volatilise during sintering in the neodymium-free sample. (C) 2002 Elsevier Science Ltd. All rights reserved.

Can Tricuspid Annuloplasty of the Donor Heart Reduce Valve Insufficiency following Cardiac Transplantation with Bicaval Anastomosis?

Background: The aim of this study was to evaluate the degree of tricuspid valve insufficiency after orthotopic cardiac transplantation with bicaval anastomosis and prophylactic donor heart annuloplasty. Methods: At present, our cardiac transplantation experience includes 478 cases. After January 2002, we included 30 consecutive patients in this study who had undergone orthotopic cardiac transplantation and survived >6 months. The patients were divided into 2 groups: group I, 15 patients who underwent transplantation with prophylactic tricuspid annuloplasty on the donor heart with the De Vega technique; and group II, 15 patients who underwent transplantation without this procedure. Their preoperative clinical characteristics were the same. During the late postoperative follow-up, the degree of tricuspid insufficiency was evaluated by transthoracic Doppler echocardiography and assessed according to the Simpson scale: 0, absent; 1, mild; 2, moderate; and 3, severe. Hemodynamic parameters were evaluated invasively by means of a Swan-Ganz catheter during routine endomyocardial biopsies. Results: The mean follow-up time was 26.9 +/- 5.4 months (range, 12-36 months). In group I, 1 patient (6.6%) died from infection in the 18th month after the operation; the death was not related to the annuloplasty. In group II, 1 death (6.6%) occurred after 10 months because of rejection (P > .05). After the 24-month follow-up, the mean degree of tricuspid insufficiency was 0.4 +/- 0.5 in group I and 1.7 +/- 0.9 in group II (P < .05). Similarly, the 2 groups were significantly different with respect to the right atrium pressure, which was higher in group II. Conclusions: Prophylactic tricuspid annuloplasty on the donor heart was able to reduce significantly the degree of valvular insufficiency, even in cardiac transplantation with bicaval anastomosis; however, it did not modify significantly the hemodynamic performance of the allograft during the investigation period. It is very important to extend the observation period and casuistics to verify other benefits that this technique may offer.