All-optical routing using a 12×12 passive InP wavelength selective router and tuneable wavelength conversion

All-optical routing of 2.5Gbit/s WDM signals across two cascaded Optical Cross Connects(OXCs) with a penalty of only 0.6dB has been demonstrated using tuneable wavelength converters and a passive WDM router.

All-optical routing using a 12×12 passive InP wavelength selective router and tuneable wavelength conversion

All-optical routing of 2.5Gbit/s WDM signals across two cascaded Optical Cross Connects(OXCs) with a penalty of only 0.6dB has been demonstrated using tuneable wavelength converters and a passive WDM router.

Over-wintering performance of mixed sex and monosex tilapia (Oreochromis niloticus L.) in Bangladesh

An experiment was conducted for six months in 6 experimental ponds (each size 80 of m2) to assess the over-wintering performance between mixed sex and monosex tilapia, Oreochromis niloticus. The experiment was carried out with two treatments each with three replicates. In the first treatment (T1), mixed sex tilapia were stocked in 3 ponds with a mean initial of 4.80±0.18 g. In the second treatment (T2), monosex tilapia were stocked in another 3 ponds with a mean initial weight of 4.81 ±0.20 g. Each pond was stocked with 250 fingerlings. Fish were fed at the rate of 6% of fish body weight at the beginning. The feeding rate was gradually reduced to 2% for the third month and finally increased to 3% for rest of the period. Water quality was monitored fortnightly and the ranges were: temperature17.86-29.10°C, dissolved oxygen 4.25-6.10 mg/1, pH 6.97-7.20 and transparency 24.10-36.50 cm. After 6 months of rearing monosex tilapia attained a significantly (pand survival (%)values between the mixed sex and monosex tilapia. The production of monosex tilapia (3723.10 kg/ha) was about 32% higher than that of mixed sex tilapia (2776.28 kg/ha). The net profit/ha generated from the 6 months culture period was calculated as Tk. 43,311.45 and. 69,277.32/- for mixed sex and monosex tilapia respectively. The results of the present study suggested that it is possible to successfully culture tilapia during the winter period and the culture of monosex tilapia is more profitable due to its higher growth rate than that of mixesex tilapia.

Present status of harvesting, transportation and marketing of freshwater Small Indigenous Species of Fish (SIS) of Bangladesh

A survey conducted to evaluate the present status of harvesting, transportation and marketing of freshwater SIS of Bangladesh showed that among the 56 to 73 species of small indigenous fish species (SIS), mola (Amblypharyngodon mola), dhela (Osteobrama cotio cotio), puti (Barbodes sarana), tit puti (Puntius ticto), tengra (Mystus vitatus), chapila ( Gudusia chapra), batashi (Pseudotropius atherinoides), buzuri tengra (Mystus tengra), katchki (Corika soborna), gol chanda (Chanda ranga), lamba chanda (Chanda nama), phul chela (Chela phulo) and lata (Channa punctatus) are the most common. But the abundance of the mola, puti, tengra, batashi and chapila are higher than the other SIS species. Puti was at the top of the list in percentage abundance (7-9%), followed by mola (7-8%), tengra 6-7% and chapila 5-6% in all the investigated areas. Three levels of market or marketing systems were observed in the distribution channel of fish trade: primary, secondary/higher secondary and final consuming markets. Primary market is the catching point in the rural area. In secondary market, the collectors bring the fish from primary market to the landing ghats, usually to the nearest thana market or at a place well linked by rivers, road and rail transport. On purchasing the fish from the higher secondary market, the paikars sell the fish to the retailers who take it to the final consumer market. Different types of crafts and gears are used for catching the SIS in Bangladesh. Monofilament gill nets (20%), traps and line nets (25%) and seine nets (25%) are the dominant gears in respect of the total catch followed by lift net (10%) and cast net (20%). A total of 10 types of gear are listed according to their mode of operation which used for catching SIS. The processors in consumer market received higher marketing profit followed by primary market and secondary market, respectively.

An observation of performances in carp-prawn polyculture in respect of fingerlings size and water area

Performances of fingerling size and water area was studied. Seven species of fish included 25% of Hypophthalmichthys molitrix, 15% of Gada catla, 20% of Labeo rohita, 10% of Cirrhinus mrigala, 10% of Ctenophyringodon idella and 20% of Macrobrachium rosenbergii were stocked at the rate of 8,000 individual/ha along Barbodes gonionoms at 6.0g weight size with a stocking density of 2,000 indl./ ha. Survival of all species was in the range of 39.9 to 96.3% except M. rosenbergii The highest survival was obtained from L. rohita (96.3%) followed by C mrigala (96.0 %)., B. gonionotus (92.3%), C idella (90.6%), H. molitrix (84.0%), C cada (81.7%) respectively. While the survival of M. rosenbergiiwas 13.1%. The highest production of 4912 kg/ha/yr was obtained from the bigger ponds (0.4 ha) stocked with 20-32g size of fingerlings, while lowest production (3123 kg/ha/yr) from small pond (0.1 ha) stocked with 3-10 g fingerlings. Economic analysis shows the highest net profit in bigger ponds stocked with bigger fish seed.

Input-output relationship and economics of pangas monoculture and carp-pangas polyculture in two districts of Bangladesh

An attempt was made to study the input-output relationships and economics of pangas monoculture and carp-pangas polyculture in Bangladesh. By analyzing the data collected from 50 pangas farms and 55 carp-pangas farms, the study has investigated the production systems of two technologies and the effects of fingerling stocking and applications of feed and fertilizer on fisheries income. The data were collected from the fishermen of Trishal and Bhaluka of Mymensingh district, and Kahaloo and Adamdighee of Bogra district during 2001-02. For pangas monoculture, the stocking density was 31,561 per ha while it was 55,017 per ha in carp-pangas polyculture. Most of the farmers used urea, TSP and lime before stocking. Rice and wheat bran happened to be the most common feed ingredients for both types of culture in general. Other important ingredients used were mustard oil-cakes, rice polish, wheat flour, fish meal, bone meal, soybean meal and poultry litter. In terms of quantities, rice bran and wheat bran dominated the farmers list. Rice and wheat bran together constituted about 60% of all studied feeds. Feed cost constituted 59.13% of total costs for pangas monoculture and 67.44% for carp-pangas polyculture. Per ha productions of pangas and carp-pangas in a single culture cycle were 15,508 kg and 19,745 kg, respectively. Per ha gross profits were estimated to be Tk 310,311 and Tk 464,418 for pangas monoculture and carp-pangas polyculture, respectively. Net profit appeared to be Tk 264,216 per ha for pangas monoculture and Tk 416,509 per ha for carp-pangas polyculture. The BCRs calculated were 1.46 and 1.68 for monoculture and polyculture, respectively. The break-even costs per kg of fish were estimated at Tk 36.93 for pangas and Tk 30.93 for mixed species which was much lower than the prices the producers received. Break-even productions were estimated at 10,702 kg per ha for pangas monoculture and 11,784 kg per ha for carp-pangas polyculture. Fingerling and feed cost, and pond size significantly explained the variation of income from pangas monoculture. These factors have significantly influenced the income from the crop. Functional analysis shows that 1% increase in the feed cost might increase 0.51% of pangas income and 0.41% in carp-pangas income. No other inputs had shown this much of responses to increasing income from a fish.

Marketing of value-added products from silver carp and involvement of rural people in the production and marketing chain

Cost-profit analysis and market testing of some value-added products from silver carp such as fish mince block, fish sausage, fish ball, fish stick and fish burger were analyzed during April 2001 to March 2002. The study also explored the possibility to involve rural low-income people in the production and marketing of such products. The production of silver carp was higher in greater Jessore and Mymensingh districts but the price remained low during the peak-harvesting season in October to November. The price varied with size of the fish, season, market characteristics and effective demand of the buyers. Price of about 500 g size fish was found to be Tk. 20-25/kg in the rural markets. The average size of fish in the rural markets was 3S0-550 g while that in the urban markets it was 700-1,200 g. The cost of production of the value added products and profit margin were assessed on the basis of market price of the raw material as well as that of the finished products, transportation, storage and marketing costs. The profit margins of 34%, 39%, 81% and 31% of their sales price were obtained for fish sausage, fish ball, fish stick and fish burger, respectively. Actual production cost could be minimized if the fish is purchased directly from the farmers. Consumer's acceptance and marketability tests showed that both rural and urban people preferred fish ball than fish sausage. However, response towards the taste, flavor and color of fish ball and fish sausage was found to vary with occupations and age of the consumers. A correlation was observed between age group and acceptance of new products. Fish ball, fish stick and fish burger were found to be the most preferable items to the farmers because of easy formulation process with common utensils. Good marketing linkage and requirement of capital had been identified as the prerequisites for operating small-scale business on value-added fish products.

Production of freshwater giant prawn using over-wintered juveniles for enhancement of farm income and reduction of rural poverty in Bangladesh

Freshwater giant prawn, Macrobrachium rosenbergii fry produced during late season can not withstand low temperature thus the prawn culture programme during winter is hampered. To overcome this problem, late season (August-September) prawn juveniles (0.9-6.8 g) were stocked at a density of 1.43 to 3.57/square meter in 350-476 square-meter ponds in Pabna and Mymensingh districts during October 2000 and cultured till May 2001. Monthly average water temperature during the winter months (December-February) varied from 16 to 22 °C and gradually increased to 32 °C in May. The prawn fry showed fast growth rate and attained an average weight of 60-70 g within eight months including three winter months. Growth compensation was observed during summer months. Survival rate was 60-79%. After extrapolation of the present growth rate more than 1,600 kg/ha production can be achieved in better-managed ponds. Extrapolated cost of production was Tk. 268,000 and 200,000 Tk./ha in two best ponds, sale value was Tk. 644,9146 [sic] and 528,466 and gross profit was Tk. 376,000-410,000, suggesting a higher economic feasibility of farming freshwater prawn with over-wintered juveniles.

Economic analysis of 22m and 23m deep sea trawlers

The cost-benefit analysis of 23m and 22m trawlers operated from Visakhapatnam base is presented. The study indicated that the deep sea fishing in Indian waters is a profitable venture. The profit over capital investment for a 23m trawler worked out to about 18% whereas the same was about 10% for a 22m trawler. Catch per trawling operation, cost of production, productivity per man year, energy yield etc. establish the economic superiority of 23m vessel.

Integrated billing mechanisms in the Internet of Things to support information sharing and enable new business opportunities

The Internet of Things (IOT) concept and enabling technologies such as RFID offer the prospect of linking the real world of physical objects with the virtual world of information technology to improve visibility and traceability information within supply chains and across the entire lifecycles of products, as well as enabling more intuitive interactions and greater automation possibilities. There is a huge potential for savings through process optimization and profit generation within the IOT, but the sharing of financial benefits across companies remains an unsolved issue. Existing approaches towards sharing of costs and benefits have failed to scale so far. The integration of payment solutions into the IOT architecture could solve this problem. We have reviewed different possible levels of integration. Multiple payment solutions have been researched. Finally we have developed a model that meets the requirements of the IOT in relation to openness and scalability. It supports both hardware-centric and software-centric approaches to integration of payment solutions with the IOT. Different requirements concerning payment solutions within the IOT have been defined and considered in the proposed model. Possible solution providers include telcos, e-payment service providers and new players such as banks and standardization bodies. The proposed model of integrating the Internet of Things with payment solutions will lower the barrier to invoicing for the more granular visibility information generated using the IOT. Thus, it has the potential to enable recovery of the necessary investments in IOT infrastructure and accelerate adoption of the IOT, especially for projects that are only viable when multiple benefits throughout the supply chain need to be accumulated in order to achieve a Return on Investment (ROI). In a long-term perspective, it may enable IT-departments to become profit centres instead of cost centres. © 2010 - IOS Press and the authors. All rights reserved.

Year-round and rotational freshwater prawn, Macrobrachium rosenbergii and paddy farming: soil quality, production and economics

A study was carried out at five upazillas (Dumuria, Fakirhat, Pirojpur sadar, Gopalgonj sadar and Kalia) of five southern districts of Khulna, Bagerhat, Pirojpur, Gopalgonj and Narail to understand the comparative production performance and any effect on soil quality in case of year-round golda (Macrobrachium rosenbergii), alternate prawn-paddy and year-round paddy farming. A direct interview of 55 farmers was taken, using pretested questionnaire, and soil samples were taken from selected farms before and after each crop. Among the five upazillas, farmers in Gopalgonj sadar and Kalia are not practicing year-round golda. Rotational golda-paddy farming has been recorded to result in maximum profit, with the highest of Tk. 310,912/ha/year in 2003 at Dumuria. Only paddy farming is less profitable than other two cropping patterns, irrespective of study sites. The nutrient status of soil in rotational golda and paddy farming has been found improved, compared to that of only golda or paddy farming.

The effect of clearance on shrouded and unshrouded turbines at two levels of reaction

In this paper, the effect of seal clearance on the efficiency of a turbine with a shrouded rotor is compared with the effect of the tip clearance when the same turbine has an unshrouded rotor. The shrouded versus unshrouded comparison was undertaken for two turbine stage designs one having 50% reaction the other having 24% reaction. Measurements for a range of clearances, including very small clearances, showed three important phenomena. Firstly, as the clearance is reduced, there is a "break-even clearance" at which both the shrouded turbine and the unshrouded turbine have the same efficiency. If the clearance is reduced further, the unshrouded turbine performs better than the shrouded turbine, with the difference at zero clearance termed the "offset loss". This is contrary to the traditional assumption that both shrouded and unshrouded turbines have the same efficiency at zero clearance. The physics of the break-even clearance and the offset loss are discussed. Secondly, the use of a lower reaction had the effect of reducing the tip leakage efficiency penalty for both the shrouded and the unshrouded turbines. In order to understand the effect of reaction on the tip leakage, an analytical model was used and it was found that the tip leakage efficiency penalty should be understood as the dissipated kinetic energy rather than either the tip leakage mass flow rate or the tip leakage loss coefficient. Thirdly, it was also observed that, at a fixed flow coefficient, the fractional change in the output power with clearance was approximately twice the fractional change in efficiency with clearance. This was explained by using an analytical model. © 2010 by ASME.

Interaction between Fe-based oxygen carriers and n-heptane during chemical looping combustion

Chemical looping combustion (CLC) uses a metal oxide (the oxygen carrier) to provide oxygen for the combustion of a fuel and gives an inherent separation of pure CO2 with minimal energy penalty. In solid-fuel CLC, volatile matter will interact with oxygen carriers. Here, the interaction between iron-based oxygen carriers and a volatile hydrocarbon (n-heptane) was investigated in both a laboratory-scale fluidised bed and a thermogravimetric analyser (TGA). Experiments were undertaken to characterise the thermal decomposition of the n-heptane occurring in the presence and in the absence of the oxygen carrier. In a bed of inert particles, carbon deposition increased with temperature and acetylene appeared as a possible precursor. For a bed of carrier consisting of pure Fe2O3, carbon deposition occurred once the Fe2O3 was fully reduced to Fe. When the Fe2O3 was doped with 10 mol % Al2O3 (Fe90Al), deposition started when the carrier was reduced to a mixture of Fe and FeAl2O4, the latter being very unreactive. Furthermore, when pure Fe2O3 was fully reduced to Fe, agglomeration of the fluidised bed occurred. However, Fe90Al did not give agglomeration even after extended reduction. The results suggest that Fe90Al is promising for the CLC of solid fuels. © 2012 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Fertile-free fuels in pressurized water reactors: Design challenges and solutions

This paper investigates the basic feasibility of using reactor-grade Pu in fertile-free fuel (FFF) matrix in pressurized water reactors (PWRs). Several important issues were investigated in this work: the Pu loading required to achieve a specific interrefueling interval, the impact of inert matrix composition on reactivity constrained length of cycle, and the potential of utilizing burnable poisons (BPs) to alleviate degradation of the reactivity control mechanism and temperature coefficients. Although the subject was addressed in the past, no systematic approach for assessment of BP utilization in FFF cores was published. In this work, we examine all commercially available BP materials in all geometrical arrangements currently used by the nuclear industry with regards to their potential to alleviate the problems associated with the use of FFF in PWRs. The recently proposed MgO-ZrO2 solid-state solution fuel matrix, which appears to be very promising in terms of thermal properties and radiation damage resistance, was used as a reference matrix material in this work. The neutronic impact of the relative amounts of MgO and ZrO2 in the matrix were also studied. The analysis was performed with a neutron transport and fuel assembly burnup code BOXER. A modified linear reactivity model was applied to the two-dimensional single fuel assembly results to approximate the full core characteristics. Based on the results of the performed analyses, the Pu-loaded FFF core demonstrated potential feasibility to be used in existing PWRs. Major FFF core design problems may be significantly mitigated through the correct choice of BP design. It was found that a combination of BP materials and geometries may be required to meet all FFF design goals. The use of enriched (in most effective isotope) BPs, such as 167Er and 157Gd, may further improve the BP effectiveness and reduce the fuel cycle length penalty associated with their use.