Requirement of poly(ADP-ribose) polymerase in recovery from DNA damage in mice and in cells

Poly(ADP-ribose) polymerase [PARP; NAD+ ADP-ribosyltransferase; NAD+: poly(adenosine-diphosphate-d-ribosyl)-acceptor ADP-d-ribosyltransferase, EC 2.4.2.30] is a zinc-finger DNA-binding protein that detects specifically DNA strand breaks generated by genotoxic agents. To determine its biological function, we have inactivated both alleles by gene targeting in mice. Treatment of PARP−/− mice either by the alkylating agent N-methyl-N-nitrosourea (MNU) or by γ-irradiation revealed an extreme sensitivity and a high genomic instability to both agents. Following whole body γ-irradiation (8 Gy) mutant mice died rapidly from acute radiation toxicity to the small intestine. Mice-derived PARP−/− cells displayed a high sensitivity to MNU exposure: a G2/M arrest in mouse embryonic fibroblasts and a rapid apoptotic response and a p53 accumulation were observed in splenocytes. Altogether these results demonstrate that PARP is a survival factor playing an essential and positive role during DNA damage recovery.

Inhibition of poly(ADP-ribose) polymerase activity is insufficient to induce tetraploidy

Poly(ADP-ribose) polymerase (PARP) knockout mice are resistant to murine models of human diseases such as cerebral and myocardial ischemia, traumatic brain injury, diabetes, Parkinsonism, endotoxic shock and arthritis, implicating PARP in the pathogenesis of these diseases. Potent selective PARP inhibitors are therefore being evaluated as novel therapeutic agents in the treatment of these diseases. Inhibition or depletion of PARP, however, increases genomic instability in cells exposed to genotoxic agents. We recently demonstrated the presence of a genomically unstable tetraploid population in PARP–/– fibroblasts and its loss after stable transfection with PARP cDNA. To elucidate whether the genomic instability is attributable to PARP deficiency or lack of PARP activity, we investigated the effects of PARP inhibition on development of tetraploidy. Immortalized wild-type and PARP–/– fibroblasts were exposed for 3 weeks to 20 µM GPI 6150 (1,11b-dihydro-[2H]benzopyrano[4,3,2-de]isoquinolin-3-one), a novel small molecule specific competitive inhibitor of PARP (Ki = 60 nM) and one of the most potent PARP inhibitors to date (IC50 = 0.15 µM). Although GPI 6150 initially decreased cell growth in wild-type cells, there was no effect on cell growth or viability after 24 h. GPI 6150 inhibited endogenous PARP activity in wild-type cells by ∼91%, to about the residual levels in PARP–/– cells. Flow cytometric analysis of unsynchronized wild-type cells exposed for 3 weeks to GPI 6150 did not induce the development of tetraploidy, suggesting that, aside from its catalytic function, PARP may play other essential roles in the maintenance of genomic stability.

Poly(ADP-ribose) polymerase-1 is required for efficient HIV-1 integration

Poly(ADP-ribose) polymerase-1 (PARP-1; EC 2.4.2.30) is an abundant nuclear enzyme, activated by DNA strand breaks to attach up to 200 ADP-ribose groups to nuclear proteins. As retroviral infection requires integrase-catalyzed DNA strand breaks, we examined infection of pseudotyped HIV type I in fibroblasts from mice with a targeted deletion of PARP-1. Viral infection is almost totally abolished in PARP-1 knockout fibroblasts. This protection from infection reflects prevention of viral integration into the host genome. These findings suggest a potential for PARP inhibitors in therapy of HIV type I infection.

Purification and cDNA Cloning of Maize Poly(ADP)-Ribose Polymerase

Poly(ADP)-ribose polymerase (PADPRP) has been purified to apparent homogeneity from suspension cultures of the maize (Zea mays) callus line. The purified enzyme is a single polypeptide of approximately 115 kD, which appears to dimerize through an S-S linkage. The catalytic properties of the maize enzyme are very similar to those of its animal counterpart. The amino acid sequences of three tryptic peptides were obtained by microsequencing. Antibodies raised against peptides from maize PADPRP cross-reacted specifically with the maize enzyme but not with the enzyme from human cells, and vice versa. We have also characterized a 3.45-kb expressed-sequence-tag clone that contains a full-length cDNA for maize PADPRP. An open reading frame of 2943 bp within this clone encodes a protein of 980 amino acids. The deduced amino acid sequence of the maize PADPRP shows 40% to 42% identity and about 50% similarity to the known vertebrate PADPRP sequences. All important features of the modular structure of the PADPRP molecule, such as two zinc fingers, a putative nuclear localization signal, the automodification domain, and the NAD+-binding domain, are conserved in the maize enzyme. Northern-blot analysis indicated that the cDNA probe hybridizes to a message of about 4 kb.

Identification of the coding region for a second poly(A) polymerase in Escherichia coli.

We had earlier identified the pcnB locus as the gene for the major Escherichia coli poly(A) polymerase (PAP I). In this report, we describe the disruption and identification of a candidate gene for a second poly(A) polymerase (PAP II) by an experimental strategy which was based on the assumption that the viability of E. coli depends on the presence of either PAP I or PAP II. The coding region thus identified is the open reading frame f310, located at about 87 min on the E. coli chromosome. The following lines of evidence support f310 as the gene for PAP II: (i) the deduced peptide encoded by f310 has a molecular weight of 36,300, similar to the molecular weight of 35,000 estimated by gel filtration of PAP II; (ii) the deduced f310 product is a relatively hydrophobic polypeptide with a pI of 9.4, consistent with the properties of partially purified PAP II; (iii) overexpression of f310 leads to the formation of inclusion bodies whose solubilization and renaturation yields poly(A) polymerase activity that corresponds to a 35-kDa protein as shown by enzyme blotting; and (iv) expression of a f310 fusion construct with hexahistidine at the N-terminus of the coding region allowed purification of a poly(A) polymerase fraction whose major component is a 36-kDa protein. E. coli PAP II has no significant sequence homology either to PAP I or to the viral and eukaryotic poly(A) polymerases, suggesting that the bacterial poly(A) polymerases have evolved independently. An interesting feature of the PAP II sequence is the presence of sets of two paired cysteine and histidine residues that resemble the RNA binding motifs seen in some other proteins.

Structure of the catalytic fragment of poly(AD-ribose) polymerase from chicken.

The crystal structures of the catalytic fragment of chicken poly(ADP-ribose) polymerase [NAD+ ADP-ribosyltransferase; NAD+:poly(adenosine-diphosphate-D-ribosyl)-acceptor ADP-D-ribosyltransferase, EC 2.4.2.30] with and without a nicotinamide-analogue inhibitor have been elucidated. Because this enzyme is involved in the regulation of DNA repair, its inhibitors are of interest for cancer therapy. The inhibitor shows the nicotinamide site and also suggests the adenosine site. The enzyme is structurally related to bacterial ADP-ribosylating toxins but contains an additional alpha-helical domain that is suggested to relay the activation signal issued on binding to damaged DNA.

A dominant-negative mutant of human poly(ADP-ribose) polymerase affects cell recovery, apoptosis, and sister chromatid exchange following DNA damage.

Poly(ADP-ribose) polymerase [PARP; NAD+ ADP-ribosyltransferase; NAD+:poly(adenosine-diphosphate-D-ribosyl)-acceptor ADP-D-ribosyltransferase, EC 2.4.2.30] is a zinc-dependent eukaryotic DNA-binding protein that specifically recognizes DNA strand breaks produced by various genotoxic agents. To study the biological function of this enzyme, we have established stable HeLa cell lines that constitutively produce the 46-kDa DNA-binding domain of human PARP (PARP-DBD), leading to the trans-dominant inhibition of resident PARP activity. As a control, a cell line was constructed, producing a point-mutated version of the DBD, which has no affinity for DNA in vitro. Expression of the PARP-DBD had only a slight effect on undamaged cells but had drastic consequences for cells treated with genotoxic agents. Exposure of cell lines expressing the wild-type (wt) or the mutated PARP-DBD, with low doses of N-methyl-N'-nitro-N-nitrosoguanidine (MNNG) resulted in an increase in their doubling time, a G2 + M accumulation, and a marked reduction in cell survival. However, UVC irradiation had no preferential effect on the cell growth or viability of cell lines expressing the PARP-DBD. These PARP-DBD-expressing cells treated with MNNG presented the characteristic nucleosomal DNA ladder, one of the hallmarks of cell death by apoptosis. Moreover, these cells exhibited chromosomal instability as demonstrated by higher frequencies of both spontaneous and MNNG-induced sister chromatid exchanges. Surprisingly, the line producing the mutated DBD had the same behavior as those producing the wt DBD, indicating that the mechanism of action of the dominant-negative mutant involves more than its DNA-binding function. Altogether, these results strongly suggest that PARP is an element of the G2 checkpoint in mammalian cells.

Cloning, baculovirus expression, and characterization of a second mouse prolyl 4-hydroxylase alpha-subunit isoform: formation of an alpha 2 beta 2 tetramer with the protein disulfide-isomerase/beta subunit.

Prolyl 4-hydroxylase (EC 1.14.11.2) catalyzes the posttranslational formation of 4-hydroxyproline in collagens. The vertebrate enzyme is an alpha 2 beta 2 tetramer, the beta subunit of which is a highly unusual multifunctional polypeptide, being identical to protein disulfide-isomerase (EC 5.3.4.1). We report here the cloning of a second mouse alpha subunit isoform, termed the alpha (II) subunit. This polypeptide consists of 518 aa and a signal peptide of 19 aa. The processed polypeptide is one residue longer than the mouse alpha (I) subunit (the previously known type), the cloning of which is also reported here. The overall amino acid sequence identity between the mouse alpha (II) and alpha (I) subunits is 63%. The mRNA for the alpha (II) subunit was found to be expressed in a variety of mouse tissues. When the alpha (II) subunit was expressed together with the human protein disulfide-isomerase/beta subunit in insect cells by baculovirus vectors, an active prolyl 4-hydroxylase was formed, and this protein appeared to be an alpha (II) 2 beta 2 tetramer. The activity of this enzyme was very similar to that of the human alpha (I) 2 beta 2 tetramer, and most of its catalytic properties were also highly similar, but it differed distinctly from the latter in that it was inhibited by poly(L-proline) only at very high concentrations. This property may explain why the type II enzyme was not recognized earlier, as an early step in the standard purification procedure for prolyl 4-hydroxylase is affinity chromatography on a poly(L-proline) column.

Endometrial response toward bovine herpesvirus 4 infection

Metriti ed endometriti sono le patologie maggiormente responsabili delle perdite economiche negli allevamenti bovini da latte, specialmente nel periodo successivo al parto. Mentre le metriti coinvolgono e si sviluppano in tutto l’utero e sono caratterizzate dalla presenza di sintomi sistemici, le endometriti consistono in una infiammazione che riguarda il solo endometrio, con la presenza di perdite purulente, distruzione della superficie epiteliale, congestione vascolare, edema stromale ed accumulo di linfociti e plasmacellule. Queste patologie, inoltre, possono causare, disfunzione ovarica, con conseguente infertilità e riduzione sia dell’efficienza riproduttiva della vacca sia della produzione stessa di latte. Nonostante queste malattie siano, nella maggior parte dei casi, correlate all’instaurarsi di infezioni batteriche, che possono subentrare nell’utero direttamente durante il parto, il ruolo di alcuni virus nello sviluppo di queste patologie è stato recentemente approfondito e la correlazione tra l’ Herpesvirus Bovino 4 e l’insorgere di metriti ed endometriti è stata dimostrata. L’ Herpesvirus Bovino 4 (BoHV-4) è un gamma-herpesvirus ed il suo genoma è costituito da una molecola lineare di DNA a doppio filamento con una struttura genomica di tipo B, caratterizzata dalla presenza di un’unica lunga sequenza centrale (LUR) fiancheggiata da multiple sequenze poli-ripetute (prDNA). BoHV-4 è stato isolato sia da animali sani sia da animali con differenti patologie, tra cui malattie oculari e respiratorie, ma soprattutto da casi di metriti, endometriti, vaginiti o aborti. Generalmente, il ruolo svolto dal virus in questo tipo di patologie è associato alla compresenza di altri tipi di patogeni, che possono essere virus, come nel caso del Virus Della Diarrea Virale Bovina (BVDV), o più frequentemente batteri. Usualmente, l’iniziale difesa dell’endometrio bovino nei confronti dei microbi si fonda sul sistema immunitario innato e l’attivazione di specifici recettori cellulari determina la sintesi e la produzione di citochine e chemochine pro infiammatorie, che possono essere in grado di modulare la replicazione di BoHV-4. Il genoma di BoHV-4 possiede due principali trascritti per i geni Immediate Early (IE), trai quali ORF50/IE2 è il più importante ed il suo prodotto, Rta/ORF50, è fortemente conservato tra tutti gli Herpesvirus. Esso è responsabile della diretta trans-attivazione di numerosi geni virali e cellulari e può essere modulato da differenti stimoli extracellulari. Precedentemente è stato dimostrato come il TNF-, prodotto dalle cellule stromali e dai macrofagi all’interno dell’endometrio, in conseguenza ad infezione batterica, sia in grado di aumentare la replicazione di BoHV-4 attraverso l’attivazione del pathway di NFkB e direttamente agendo sul promotore di IE2. Per queste ragioni, è risultato di forte interesse investigare quali potessero essere, invece, i fattori limitanti la replicazione di BoHV-4. In questo lavoro è stata studiata la relazione tra cellule endometriali stromali bovine infettate con l’Herpesvirus Bovino 4 e l’interferon gamma (IFN-) ed è stata dimostrata la capacità di questa molecola di restringere la replicazione di BoHV-4 in maniera IDO1 indipendente ed IE2 dipendente. Inoltre, la presenza di alcuni elementi in grado di interagire con l’ IFN-γ, all’interno del promotore di IE2 di BoHV-4, ha confermato questa ipotesi. Basandoci su questi dati, abbiamo potuto supporre l’esistenza di uno stretto vincolo tra l’attivazione dell’asse dell’interferon gamma e la ridotta replicazione di BoHV-4, andando a porre le basi per una nuova efficiente cura e prevenzione per le patologie uterine. Poiché il meccanismo corretto attraverso il quale BoHV-4 infetta l’endometrio bovino non è ancora ben compreso, è stato interessante approfondire in maniera più accurata l’interazione presente tra il virus ed il substrato endometriale, analizzando le differenze esistenti tra cellule infettate e non, in termini di espressione genica. Basandoci su dati preliminari ottenuti attraverso analisi con RNA sequencing (RNAseq), abbiamo visto come numerosi geni risultino over-espressi in seguito ad infezione con BoHV-4 e come, tra questi, la Metalloproteasi 1 sia uno dei più interessanti, a causa delle sue possibili implicazioni nello sviluppo delle patologie dell’endometrio uterino bovino. Successive analisi, effettuate tramite westernblotting e real time PCR, sono state in grado di confermare tale dato, sottolineando l’efficacia di un nuovo approccio sperimentale, basato sul RNAseq, per lo studio dell’insorgenza delle patologie.

Combined Effect of Poly(hydroxybutyrate) and Plasticizers on Polylactic acid Properties for Film Intended for Food Packaging

Poly(lactic acid) PLA, and poly(hydroxybutyrate) PHB, blends were processed as films and characterized for their use in food packaging. PLA was blended with PHB to enhance the crystallinity. Therefore, PHB addition strongly increased oxygen barrier while decreased the wettability. Two different environmentally-friendly plasticizers, poly(ethylene glycol) (PEG) and acetyl(tributyl citrate) (ATBC), were added to these blends to increase their processing performance, while improving their ductile properties. ATBC showed higher plasticizer efficiency than PEG directly related to the similarity solubility parameters between ATBC and both biopolymers. Moreover, ATBC was more efficiently retained to the polymer matrix during processing than PEG. PLA–PHB–ATBC blends were homogeneous and transparent blends that showed promising performance for the preparation of films by a ready industrial process technology for food packaging applications, showing slightly amber color, improved elongation at break, enhanced oxygen barrier and decreased wettability.

Polymeric grafting of acrylic acid onto poly(3-hydroxybutyrate-co-3-hydroxyvalerate): Surface functionalization for tissue engineering applications

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) melt processed disks and solvent cast films were modified by graft co-polyinerization with acrylic acid (AAc) in methanol solution at ambient temperature using gamma irradiation (dose rate of 4.5 kGy/h). To assess the presence of carboxylic acid groups on the surface, reaction with pentafluorophenol was performed prior to X-ray photoelectron spectroscopy analysis. The grafting yield for all samples increased with monomer concentration (2-15%), and for the solvent cast films, it also increased with dose (2-9 kGy). However, the grafting yield of the melt processed disks was largely independent of the radiation dose (2-8 kGy). Toluidine blue was used to stain the modified materials facilitating, visual information about the extent of carboxylic acid functionalization and depth penetration of the grafted copolymer. Covalent linking of glucosamine to the functionalized surface was achieved using carbodimide chemistry verifying that the modified substrates are suitable for biomolecule attachment.

Simulation of glassy state relaxations in polymers: A static analysis of methyl group and methoxy group rotation in poly(vinyl methyl ether)

We show that the simple quasi-static technique, also called the adiabatic mapping technique, can be used to determine the energetics of rotation of methyl and methoxy groups in amorphous poly(vinyl methyl ether) even though the latter process is too slow to be amenable to direct molecular dynamics simulation. For the methyl group rotation, we find that the mean and standard deviation of the simulated rotational barrier heights agree well with experimental data from quasi-elastic neutron scattering. In the case of the methoxy groups we find that just 4% of the groups contribute more than 90% of the observed dielectric relaxation strength. The groups which make the most contribution are those which, by virtue of their particular conformation and local environment, have two alternative positions of similar energy.

Design and characterisation of novel blends of poly(lactic acid)

This thesis is concerned with the effect of polymer structure on miscibility of the three component blends based on poly(lactic acid) (PLA) with using blending techniques. The examination of novel PLA homologues (pre-synthesised poly(a-esters)), including a range of aliphatic and aromatic poly(a-esters) is an important aspect of the work. Because of their structural simplicity and similarity to PLA, they provide an ideal system to study the effect of polyester structures on the miscibility of PLA polymer blends. The miscibility behaviour of the PLA homologues is compared with other aliphatic polyesters (e.g. poly(e-caprolactone) (PCL), poly(hydroxybutyrate hydroxyvalerate) (P(HB-HV)), together with a series of cellulose-based polymers (e.g. cellulose acetate butyrate (CAB)). The work started with the exploration the technique used for preliminary observation of the miscibility of blends referred to as “a rapid screening method” and then the miscibility of binary blends was observed and characterised by percent transmittance together with the Coleman and Painter miscibility approach. However, it was observed that symmetrical structures (e.g. a1(dimethyl), a2(diethyl)) promote the well-packing which restrict their chains from intermingling into poly(L-lactide) (PLLA) chains and leads the blends to be immiscible, whereas, asymmetrical structures (e.g. a4(cyclohexyl)) behave to the contrary. a6(chloromethyl-methyl) should interact well with PLLA because of the polar group of chloride to form interactions, but it does not. It is difficult to disrupt the helical structure of PLLA. PLA were immiscible with PCL, P(HB-HV), or compatibiliser (e.g. G40, LLA-co-PCL), but miscible with CAB which is a hydrogen-bonded polymer. However, these binary blends provided a useful indication for the exploration the novel three component blends. In summary, the miscibility of the three-component blends are miscible even if only two polymers are miscible. This is the benefit for doing the three components blend in this thesis, which is not an attempt to produce a theoretical explanation for the miscibility of three components blend system.

Synthesis and evaluation of scintillant-containing poly(oxyethylene glycol) polymer (POP-Sc) supports

Co-polymerisation of α-styryl-poly(ethylene glycol)300, α,ω-bis(styryl)-penta(ethylene glycol) and 2,5-diphenyl-4-(4′-vinylbenzyl)oxazole in varying molar ratios resulted in the production of chemically functionalised scintillant-containing poly(oxyethylene glycol) polymer (POP-Sc) supports. These materials are compatible with both aqueous and organic solvents, and possess the ability to scintillate efficiently in the presence of ionising radiation, even after prolonged and repeated exposure to organic solvents. The utility of POP-Sc supports in both solid-phase peptide chemistry and a functional scintillation proximity assay has been exemplified.

Soft hydrogels from nanotubes of poly(ethylene oxide)−tetraphenylalanine conjugates prepared by click chemistry

A new poly(ethylene oxide)-tetraphenylalanine polymer-peptide conjugate has been prepared via a “click” reaction between an alkyne-modified peptide and an azide-terminated PEO oligomer. Self-assembled nanotubes are formed after dialysis of a THF solution of this polymer-peptide conjugate against water. The structure of these nanotubes has been probed by circular dichroism, IR, TEM, and SAXS. From these data, it is apparent that self-assembly involves the formation of antiparallel ß-sheets and p-p-stacking. Nanotubes are formed at concentrations between 2 and 10 mg mL-1. Entanglement between adjacent nanotubes occurs at higher concentrations, resulting in the formation of soft hydrogels. Gel strength increases at higher polymer-peptide conjugate concentration, as expected.