Effect of the anti-neoplastic drug doxorubicin on XPD-mutated DNA repair-deficient human cells

Doxorubicin (DOX), a member of the anthracycline group, is a widely used drug in cancer therapy. The mechanisms of DOX action include topoisomerase II-poisoning, free radical release, DNA adducts and interstrand cross-link (ICL) formation. Nucleotide excision repair(NER) is involved in the removal of helix-distorting lesions and chemical adducts, however, little is known about the response of NER-deficient cell lines to anti-tumoral drugs like DOX. Wild type and XPD-mutated cells, harbouring mutations in different regions of this gene and leading to XP-D, XP/CS or TTD diseases, were treated with this drug and analyzed for cell cycle arrest and DNA damage by comet assay. The formation of DSBs was also investigated by determination of gamma H2AX foci. Our results indicate that all three NER-deficient cell lines tested are more sensitive to DOX treatment, when compared to wild type cells or XP cells complemented by the wild type XPD cDNA, suggesting that NER is involved in the removal of DOX-induced lesions. The cell cycle analysis showed the characteristic G2 arrest in repair-proficient MRC5 cell line after DOX treatment, whereas the repair-deficient cell lines presented significant increase in sub-G1 fraction. The NER-deficient cell lines do not show different patterns of DNA damage formation as assayed by comet assay and phosphorylated H2AX foci formation. Knock-down of topoisomerase II alpha with siRNA leads to increased survival in both MRC5 and XP cells, however, XP cell line still remained significantly more sensitive to the treatment by DOX. Our study suggests that the enhanced sensitivity is due to DOX-induced DNA damage that is subject to NER, as we observed decreased unscheduled DNA synthesis in XP-deficient cells upon DOX treatment. Furthermore, the complementation of the XPD-function abolished the observed sensitivity at lower DOX concentrations, suggesting that the XPD helicase activity is involved in the repair of DOX-induced lesions. (C) 2009 Elsevier B.V. All rights reserved.

Chlorella vulgaris up-modulation of myelossupression induced by lead: The role of stromal cells

In this study, Chlorella vulgaris (CV) was examined for its chelating effects on the ability of bone marrow stromal cell layer to display myeloid progenitor cells in vitro in lead-exposed mice, using the long-term bone marrow culture (LTBMC). In addition, the levels of interleukin (IL)-6, an important hematopoietic stimulator, as well as the numbers of adherent and non-adherent cells were also investigated. Mice were gavage treated daily with a single 50 mg/kg dose of CV for 10 days, concomitant to continuous offering of 1300 ppm lead acetate in drinking water. We found that CV up-modulates the reduced ability of stromal cell layer to display myeloid progenitor cells in vitro in lead-exposed mice and restores both the reduced number of non-adherent cells and the ability of stromal cells from these mice to produce IL-6. Monitoring of lead poisoning demonstrated that CV treatment significantly reduced lead levels in blood and tissues, completely restored the normal hepatic ALA levels, decreased the abnormally high plasma ALA and partly recovered the liver capacity to produce porphyrins. These findings provide evidence for a beneficial use of CV for combination or alternative chelating therapy to protect the host from the damage induced by lead poisoning. (C) 2008 Elsevier Ltd. All rights reserved.

Microbiopsies of Surface Dental Enamel as a Tool to Measure Body Lead Burden

Lead (Pb) poisoning is preventable but continues to be a public health problem in several countries. Measuring Pb in the surface dental enamel (SDE) using microbiopsies is a rapid, safe, and painless procedure. There are different protocols to perform these microbiopsies, but the reliability of dental enamel lead levels (DELL) determination is dependent upon biopsy depth (BD). It is established that DELL decrease from the outermost superficial layer to the inner layer of dental enamel. The aim of this study was to determine DELL obtained by two different microbiopsy techniques on SDE termed protocol I and protocol II. Two consecutive enamel layers were removed from the same subject group (n = 138) for both protocols. Protocol I consisted of a biopsied site with a diameter of 4 mm after the application of 10 l HCl for 35 s. Protocol II involved a biopsied site of 1.6 mm diameter after application of 5 l HCl for 20 s. The results demonstrated that there were no significant differences for BD and DELL between homologous teeth using protocol I. However, there was a significant difference between DELL in the first and second layers using both protocols. Further, the BD in protocol II overestimated DELL values. In conclusion, SDE analyzed by microbiopsy is a reliable biomarker in protocol I, but the chemical method to calculate BD in protocol II appeared to be inadequate for measurement of DELL. Thus, DELL could not be compared among studies that used different methodologies for SDE microbiopsies.

Simultaneous voltammetric detection of ascorbic acid, dopamine and uric acid using a pyrolytic graphite electrode modified into dopamine solution

Pyrolytic graphite electrodes (PGE) were modified into dopamine solutions using phosphate buffer solutions, pH 10 and 6.5, as supporting electrolyte. The modification process involved a previous anodization of the working electrode at +1. 5 V into 0. 1 mol-L-1 NaOH followed by other anodization step, in the same experimental conditions, into dopamine (DA) solutions. pH of the supporting electrolyte performed an important role in the production of a superficial melanin polymeric film, which permitted the simultaneous detection of ascorbic acid (AA), (DA) and uric acid (UA), Delta EAA-DA = 222 mV-, Delta EAA-UA = 360 mV and Delta EDA-UA=138mV, avoiding the superficial poisoning effects. The calculated detection limits were: 1.4 x 10(-6) mol L-1 for uric acid, 1.3x10-(5) molL(-1) for ascorbic acid and 1.1 X 10(-7) mol L-1 for dopamine, with sensitivities of (7.7 +/- 0.5), (0.061 +/- 0.001) and (9.5 +/- 0.05)A mol(-1) cm(-2), respectively, with no mutual interference. Uric acid was determined in urine, blood and serum human samples after dilution in phosphate buffer and no additional sample pre-treatment was necessary. The concentration of uric acid in urine was higher than the values found in blood and serum and the recovery tests (92-102%) indicated that no matrix effects were observed. (C) 2008 Elsevier B.V. All rights reserved.

The influence of acetic acid on the ethanol electrooxidation on a platinum electrode

In the presented work, the evaluation of the influence of acetic acid in the electrochemical environment on the ethanol electro-oxidation reaction on a polycrystalline platinum electrode is presented for the first time. Using cyclic voltammetry. chronoamperometry and in situ Fourier Transformed IR spectroscopy (FTIR) it was demonstrated that an inhibition of the ethanol oxidation reaction occurs for bulk acetic acid concentrations of the order 0.1 mu mol L(-1) -5 mmol L(-1). This inhibition effect is related to the decrease of CO(2) and acetaldehyde production as confirmed by spectroscopic results. (C) 2011 Elsevier B.V. All rights reserved.

Stabilizing Nonstationary Electrochemical Time Series

Electrochemical systems are ideal working-horses for studying oscillatory dynamics. Experimentally obtained time series, however, are usually associated with a spontaneous drift in some uncontrollable parameter that triggers transitions among different oscillatory patterns, despite the fact that all controllable parameters are kept constant. Herein we present an empirical method to stabilize experimental potential time series. The method consists of applying a negative galvanodynamic sweep to compensate the spontaneous drift and was tested for the oscillatory electro-oxidation of methanol on platinum. For a wide range of applied currents, the base system presents spontaneous transitions from quasi-harmonic to mixed mode oscillations. Temporal patterns were stabilized by galvanodynamic sweeps at different rates. The procedure resulted in a considerable increase in the number of oscillatory cycles from 5 to 20 times, depending on the specific temporal pattern. The spontaneous drift has been associated with uncompensated oscillations, in which the coverage of some adsorbed species are not reestablished after one cycle; i.e., there is a net accumulation and/or depletion of adsorbed species during oscillations. We interpreted the rate of the galvanodynamic sweep in terms of the time scales of the poisoning processes that underlies the uncompensated oscillations and thus the spontaneous slow drift.

The effects of hydrogen sulfide on the polymer electrolyte membrane fuel cell anode catalyst: H(2)S-Pt/C interaction products

The performance of a polymer electrolyte membrane fuel cell (PEMFC) operating on a simulated hydrocarbon reformate is described. The anode feed stream consisted of 80% H(2),similar to 20% N(2), and 8 ppm hydrogen sulfide (H(2)S). Cell performance losses are calculated by evaluating cell potential reduction due to H(2)S contamination through lifetime tests. It is found that potential, or power, loss under this condition is a result of platinum surface contamination with elemental sulfur. Electrochemical mass spectroscopy (EMS) and electrochemical techniques are employed, in order to show that elemental sulfur is adsorbed onto platinum, and that sulfur dioxide is one of the oxidation products. Moreover, it is demonstrated that a possible approach for mitigating H(2)S poisoning on the PEMFC anode catalyst is to inject low levels of air into the H(2)S-contaminated anode feeding stream. (C) 2011 Elsevier B.V. All rights reserved.

Activation Energies of the Electrooxidation of Formic Acid on Pt(100)

The electrooxidation of small organic molecules on platinum surfaces usually involves different structure-dependent steps that include adsorption and desorption of various species and multiple reaction pathways. Because temperature plays a decisive role on each individual step, understanding its global influence on the reaction mechanism is often a difficult task, especially when the system is studied under far from equilibrium conditions in the presence of kinetic instabilities. Aiming at contributing to unravel this problem, herein, we report an experimental study of the role played by temperature on the electrooxidation of formic acid on a Pt(100) electrode. The system was investigated under both close and far from equilibrium conditions, and apparent activation energies were estimated using different strategies. Overall, comparable activation energies were estimated under oscillatory and quasi-stationary conditions, at high potentials. At low potentials, the poisoning process associated with the formic acid dehydration step presented a negligible dependence with temperature and, therefore, zero activation energy. On the basis of our experimental findings, we suggest that formic acid dehydration is the main, but maybe not the unique, step that differentiates the temperature dependence of the oscillatory electrooxidation of formic acid on Pt(100) with that on polycrystalline platinum.

Effect of the catalyst composition in the Pt-x(Ru-Ir)(1-x)/C system on the electro-oxidation of methanol in acid media

The effect of variations in the composition for ternary catalysts of the type Pt-x(Ru-Ir)(1-x)/C on the methanol oxidation reaction in acid media for x values of 0.25, 0.50 and 0.75 is reported. The catalysts were prepared by the sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), atomic absorption spectroscopy (AAS) and energy dispersive X-ray (EDX) analyses. The nanometric character (2.8-3.2 nm) of the sol-gel deposits was demonstrated by XRD and TEM while EDX and AAS analyses showed that the metallic ratio in the compounds was very near to the expected one. Cyclic voltammograms for methanol oxidation revealed that the reaction onset occur at less positive potentials in all the ternary catalysts tested here when compared to a Pt-0.75-Ru-0.25/C (E-Tek) commercial composite. Steady-state polarization experiments (Tafel plots) showed that the Pt-0.25(Ru-Ir)(0.75)/C catalyst is the more active one for methanol oxidation as revealed by the shift of the reaction onset towards lower potentials. In addition, constant potential electrolyses suggest that the addition of Ru and Ir to Pt decreases the poisoning effect of the strongly adsorbed species generated during methanol oxidation. Consequently, the Pt-0.25 (Ru-Ir)(0.75)/C Composite catalyst is a very promising one for practical applications. (c) 2007 Elsevier B.V. All rights reserved.

Methanol and ethanol electro-oxidation on Pt-SnO(2) and Pt-Ta(2)O(5) sol-gel-modified boron-doped diamond surfaces

The search for more efficient anode catalyst than platinum to be used in direct alcohol fuel cell systems is an important challenge. In this study, boron-doped diamond film surfaces were modified with Pt, Pt-SnO(2) and Pt-Ta(2)O(5) nano-crystalline deposits by the sol-gel method to study the methanol and ethanol electro-oxidation reactions in acidic medium. Electrochemical experiments carried out in steady-state conditions demonstrate that the addition of SnO(2) to Pt produces a very reactive electrocatalyst that possibly adsorbs and/or dissociate ethanol more efficiently than pure Pt changing the onset potential of the reaction by 190 mV toward less positive potentials. Furthermore, the addition of Ta(2)O(5) to Pt enhances the catalytic activity toward the methanol oxidation resulting in a negative shift of the onset potential of 170 mV. These synergic effects indicate that the addition of these co-catalysts inhibits the poisoning effect caused by strongly adsorbed intermediary species. Since the SnO(2) catalyst was more efficient for ethanol oxidation, it could probably facilitate the cleavage of the C-C bond of the adsorbed intermediate fragments of the reaction. (C) 2009 Elsevier B.V. All rights reserved.

Photovoltaic Process Development and innovative Techniques

Photovoltaic processing is one of the processes that have significance in semiconductor process line. It is complicated due to the no. of elements involved that directly or indirectly affect the processing and final yield. So mathematically or empirically we can’t say assertively about the results specially related with diffusion, antireflective coating and impurity poisoning. Here I have experimented and collected data on the mono-crystal silicon wafers with varying properties and outputs. Then by using neural network with available experimental data output required can be estimated which is further tested by the test data for authenticity. One can say that it’s a kind of process simulation with varying input of raw wafers to get desired yield of photovoltaic mono-crystal cells.

A Gradient-Type Method For Real-Time State Estimation Of Water Distribution Networks

Drinking water distribution networks risk exposure to malicious or accidental contamination. Several levels of responses are conceivable. One of them consists to install a sensor network to monitor the system on real time. Once a contamination has been detected, this is also important to take appropriate counter-measures. In the SMaRT-OnlineWDN project, this relies on modeling to predict both hydraulics and water quality. An online model use makes identification of the contaminant source and simulation of the contaminated area possible. The objective of this paper is to present SMaRT-OnlineWDN experience and research results for hydraulic state estimation with sampling frequency of few minutes. A least squares problem with bound constraints is formulated to adjust demand class coefficient to best fit the observed values at a given time. The criterion is a Huber function to limit the influence of outliers. A Tikhonov regularization is introduced for consideration of prior information on the parameter vector. Then the Levenberg-Marquardt algorithm is applied that use derivative information for limiting the number of iterations. Confidence intervals for the state prediction are also given. The results are presented and discussed on real networks in France and Germany.

Introdução da truta arco-íris (Oncorhynchus mykiss) e suas conseqüências para a comunidade aquática dos rios de altitude do sul do Brasil

A introdução de espécies exóticas é uma prática que acompanha a história da humanidade, sendo as espécies introduzidas a base da nutrição e economia em vários países. Porém, esse processo contínuo tem levado a uma homogeneização da flora e fauna global. Os ecossistemas aquáticos, que têm recebido menor atenção que os terrestres, têm sofrido perda de diversidade, hibridação, introdução de patógenos, degradação do habitat além da necessidade e alto custo de controle das espécies introduzidas. O desenvolvimento da aqüicultura tem acelerado a introdução de peixes exóticos, que são a base dessa produção em países como o Brasil. Além desta, entre as razões para a introdução citam-se o esporte, a manipulação ecológica com controle de organismos indesejáveis, o melhoramento dos estoques, a ornamentação ou ainda introduções acidentais. No Rio Grande do Sul, nos rios dos Campos de Cima da Serra estão ocorrendo introduções da espécie exótica truta arco- íris (Oncorhynchus mykiss) desde meados da década de 90 como forma de estímulo ao turismo rural. O objetivo dessa prática é a pesca esportiva, que atrai turistas de várias regiões. Porém, os rios da região possuem várias espécies de peixes endêmicas e as conseqüências dessa prática sobre a biota aquática são desconhecidas. O objetivo do presente trabalho é avaliar o efeito da introdução da truta arco-íris sobre o ecossistema de rios de baixa ordem no município de São José dos Ausentes – RS, Brasil. Para tanto foi descrita a biologia da truta arco- íris no novo ambiente, verificando sua alimentação, movimentação, presença e viabilidade da reprodução. A ictiofauna autóctone dos rios com ausência e presença de trutas foi comparada, bem como o efeito da predação sobre a macrofauna bentônica. A ictiofauna foi amostrada com o uso da pesca elétrica, sendo o conteúdo estomacal das trutas avaliado sazonalmente. Três trutas foram marcadas e acompanhadas por ii biotelemetria para determinação da sua área de vida. Um experimento com ninhos artificiais foi conduzido para verificação da sobrevivência de ovos de trutas nas condições dos rios de São José dos Ausentes. O experimento de exclusão de peixes foi feito a fim de avaliar o efeito da predação sobre a macrofauna bentônica, comparando a macrofauna em rios com e sem trutas. Os resultados indicaram que a truta arco- íris tem como alimento principal os invertebrados bentônicos, porém as maiores classes de tamanho incluem peixes em seus alimentos principais. Logo após sua introdução a movimentação é restrita, porém alguns exemplares foram capturados em um rio onde não foi feita introdução dessa espécie. Apesar de baixa, a sobrevivência dos adultos ocorre, assim como a reprodução. A sobrevivência dos ovos também é baixa, porém, uma pós-larva foi encontrada. A ictiofauna autóctone é diferenciada nos rios com presença de truta, apresentando menor riqueza e diversidade e uma tendência a diminuição da biomassa. A macrofauna bentônica também é diferenciada, apesar de não ser possível atribuir essa diferença somente à presença das trutas.

Atribuição de causalidade e eventos acidentais e a tomada de risco

Esta pesquisa teve por objetivo avaliar possíveis relações existentes entre Atribuição de causalidade e Tomada de Risco com relação a eventos acidentes, assim como a influência de algumas variáveis sobre o processo de Tomada de Decisão em situações de risco de acidentes. Para isto foram construídos 4 instrumentos e aplicados a 59 sujeitos operários não especializados de uma indústria de conservas de pescado no Rio de Janeiro. Dentre a mostra, 30 sujeitos são do sexo feminino e 29 do sexo masculino. As variáveis consideradas foram: sexo dos sujeitos, vitimação, consequência da Tomada de Risco, situação sob julgamento e local de trabalho dos sujeitos. Os instrumentos - aplicados a cada sujeito - em número de 4, sendo que dois deles versam sobre situações no trânsito e dois sobre situações no trabalho. Os resultad08 revelaram uma influência significativa de fatores sócio-culturais e psicológicos no processo de Tomada de Decisão diante de eventos acidentais, baseados na vivência de grupos de trabalho com relação a acidentes. Os resultados mostraram que os grupos se estruturam cognitivamente no sentido de tender a padronizar a forma explicativa dos acidentes com base na realidade vivida pelo grupo.

Caracterização de um peptídeo antimicrobiano produzido por linhagem de Bacillus amyloliquefaciens isolada de solo

Em anos recentes, surgiram numerosos casos de intoxicação alimentar envolvendo patógenos emergentes. Estes casos levaram a um aumento da preocupação com a preservação dos alimentos minimamente processados e com a segurança alimentar. Este fato está induzindo a pesquisa por inibidores para estes patógenos e fatores para prolongar a vida de prateleira de produtos alimentícios. Entre as novas alternativas na preservação está a utilização de peptídeos antimicrobianos produzidos por bactérias. No presente trabalho uma bactéria identificada como Bacillus amyloliquefaciens LBM 5006 isolada de solos de mata Atlântica de Santa Catarina foi selecionada dentre outros microrganismos e sua capacidade de produzir antimicrobianos foi avaliada. O extrato bruto da cultura do isolado LBM 5006 foi caracterizado, sendo ativo contra importantes bactérias patogênicas e deteriorantes como Listeria monocytogenes, Bacillus cereus, Erwinia carotovora, Escherichia coli, dentre outras. Houve maior produção do antimicrobiano quando a bactéria foi propagada em caldo infusão de cérebro e coração (BHI) a 37o C durante 48 h. Após concentração, a atividade antimicrobiana resistiu ao tratamento com enzimas proteolíticas. A atividade antimicrobiana foi verificada em pHs ácidos, sendo inibida em pH 9 e 10. O extrato foi purificado por meio de cromatografia de gel filtração e extração com butanol. O teste qualitativo de ninidrina, juntamente com a espectroscopia de infravermelho e ultravioleta, feitos com a substância purificada revelou que o antimicrobiano possui natureza protéica. O antimicrobiano apresentou um efeito bacteriostático contra 106 UFC/mL de Listeria monocytogenes na concentração de 25 AU/ml.