AN EXPERIMENTAL INVESTIGATION INTO THE EFFECTS OF BIODIESEL BLENDS ON PARTICULATE MATTER OXIDATION IN A CATALYZED PARTICULATE FILTER DURING ACTIVE REGENERATION

Active regeneration experiments were carried out on a production 2007 Cummins 8.9L ISL engine and associated DOC and CPF aftertreatment system. The effects of SME biodiesel blends were investigated in this study in order to determine the PM oxidation kinetics associated with active regeneration, and to determine the effect of biodiesel on them. The experimental data from this study will also be used to calibrate the MTU-1D CPF model. Accurately predicting the PM mass retained in the CPF and the oxidation characteristics will provide the basis for computation in the ECU that will minimize the fuel penalty associated with active regeneration. An active regeneration test procedure was developed based on previous experimentation at MTU. During each experiment, the PM mass in the CPF is determined by weighing the filter at various phases. In addition, DOC and CPF pressure drop, particle size distribution, gaseous emissions, temperature, and PM concentration data are collected and recorded throughout each experiment. The experiments covered a range of CPF inlet temperatures using ULSD, B10, and B20 blends of biodiesel. The majority of the tests were performed at CPF PM loading of 2.2 g/L with in-cylinder dosing, although 4.1 g/L and a post-turbo dosing injector were also used. The PM oxidation characteristics at different test conditions were studied in order to determine the effects of biodiesel on PM oxidation during active regeneration. A PM reaction rate calculation method was developed to determine the global activation energy and the corresponding pre-exponential factor for all test fuels. The changing sum of the total flow resistance of the wall, cake, and channels was also determined as part of the data analysis process in order to check on the integrity of the data and to correct input data to be consistent with the expected trends of the resistance based on the engine conditions used in the test procedure. It was determined that increasing the percent biodiesel content in the test fuel tends to increase the PM reaction rate and the regeneration efficiency of fuel dosing, i.e., at a constant CPF inlet temperature, B20 test fuel resulted in the highest PM reaction rate and regeneration efficiency of fuel dosing. Increasing the CPF inlet temperature also increases PM reaction rate and regeneration efficiency of fuel dosing. Performing active regeneration with B20 as opposed to ULSD allows for a lower CPF temperature to be used to reach the same level of regeneration efficiency, or it allows for a shorter regeneration time at a constant CPF temperature, resulting in decreased fuel consumption for the engine during active regeneration in either scenario.

Feasibility study and flow scheduling optimization of a multi-product pipeline system

The first goal of this study is to analyse a real-world multiproduct onshore pipeline system in order to verify its hydraulic configuration and operational feasibility by constructing a simulation model step by step from its elementary building blocks that permits to copy the operation of the real system as precisely as possible. The second goal is to develop this simulation model into a user-friendly tool that one could use to find an “optimal” or “best” product batch schedule for a one year time period. Such a batch schedule could change dynamically as perturbations occur during operation that influence the behaviour of the entire system. The result of the simulation, the ‘best’ batch schedule is the one that minimizes the operational costs in the system. The costs involved in the simulation are inventory costs, interface costs, pumping costs, and penalty costs assigned to any unforeseen situations. The key factor to determine the performance of the simulation model is the way time is represented. In our model an event based discrete time representation is selected as most appropriate for our purposes. This means that the time horizon is divided into intervals of unequal lengths based on events that change the state of the system. These events are the arrival/departure of the tanker ships, the openings and closures of loading/unloading valves of storage tanks at both terminals, and the arrivals/departures of trains/trucks at the Delivery Terminal. In the feasibility study we analyse the system’s operational performance with different Head Terminal storage capacity configurations. For these alternative configurations we evaluated the effect of different tanker ship delay magnitudes on the number of critical events and product interfaces generated, on the duration of pipeline stoppages, the satisfaction of the product demand and on the operative costs. Based on the results and the bottlenecks identified, we propose modifications in the original setup.

Estrazione adiabatica di un fascio di particelle mediante modulazione di un kicker

Il lavoro qui proposto si sviluppa nelle seguenti parti: una breve analisi dei fenomeni coinvolti, quali la risonanza e l'invarianza adiabatica, quindi sarà studiato il problema dell'estrazione adiabatica di un fascio mediante un modello hamiltoniano semplificato che simula l'effetto di un kick dipolare.

Adiabatic extraction models for beam dynamics

Il presente lavoro prende le mosse da un problema di dinamica dei fasci relativo a un metodo di separazione di un fascio di particelle recentemente messo in funzione nell’sincrotrone PS al CERN. In questo sistema, variando adiabaticamente i parametri di un campo magnetico, nello spazio delle fasi si creano diverse isole di stabilità (risonanze) in cui le particelle vengono catturate. Dopo una parte introduttiva in cui si ricava, a partire dalle equazioni di Maxwell, l’hamiltoniana di una particella sottoposta ai campi magnetici che si usano negli acceleratori, e una presentazione generale della teoria dell’invarianza adiabatica, si procede analizzando la dinamica di tali sistemi. Inizialmente si prende in considerazione l’hamiltoniana mediata sulle variabili veloci, considerando perturbazioni (kick) dei termini dipolare e quadrupolare. In ognuno dei due casi, si arriva a determinare la probabilità che una particella sia catturata nella risonanza. Successivamente, attraverso un approccio perturbativo, utilizzando le variabili di azione ed angolo, si calcola la forza della risonanza 4:1 per un kick quadrupolare.

iGrooving: A Generative Music Mobile Application for Runners

iGrooving is a generative music mobile application specifically designed for runners. The application’s foundation is a step-counter that is programmed using the iPhone’s built-in accelerometer. The runner’s steps generate the tempo of the performance by mapping each step to trigger a kick-drum sound file. Additionally, different sound files are triggered at specific step counts to generate the musical performance, allowing the runner a level of compositional autonomy. The sonic elements are chosen to promote a meditative aspect of running. iGrooving is conceived as a biofeedback-stimulated musical instrument and an environment for creating generative music processes with everyday technologies, inspiring us to rethink our everyday notions of musical performance as a shared experience. Isolation, dynamic changes, and music generation are detailed to show how iGrooving facilitates novel methods for music composition, performance and audience participation.

The effect of notch filtering on the waveform of the newborn auditory brainstem response

OBJECTIVE: To identify whether the use of a notch filter significantly affects the morphology or characteristics of the newborn auditory brainstem response (ABR) waveform and so inform future guidance for clinical practice. DESIGN: Waveforms with and without the application of a notch filter were recorded from babies undergoing routine ABR tests at 4000, 1000 and 500 Hz. Any change in response morphology was judged subjectively. Response latency, amplitude, and measurements of response quality and residual noise were noted. An ABR simulator was also used to assess the effect of notch filtering in conditions of low and high mains interference. RESULTS: The use of a notch filter changed waveform morphology for 500 Hz stimuli only in 15% of tests in newborns. Residual noise was lower when 4000 Hz stimuli were used. Response latency, amplitude, and quality were unaffected regardless of stimulus frequency. Tests with the ABR stimulator suggest that these findings can be extended to conditions of high level mains interference. CONCLUSIONS: A notch filter should be avoided when testing at 500 Hz, but at higher frequencies appears to carry no penalty.

La protection de l'environnement par les sanctions administratives pécuniaires au Québec

Avec l’adoption le 4 octobre 2011 par l’Assemblée nationale du Québec du projet de loi 89 intitulé «Loi modifiant la Loi sur la qualité de l’environnement afin d’en renforcer le respect», le législateur est venu renforcer le régime de droit pénal en augmentant la sévérité des peines pour les infractions à Loi sur la qualité de l’environnement. Il a aussi élargi les pouvoirs d’intervention du ministre en lien avec les autorisations qu’il émet. Cependant, la principale réforme apportée par le projet de loi 89 qui touche aux mécanismes même de protection de l’environnement, est la création de toute pièce d’un régime de sanctions dites administratives pécuniaires, parallèlement au régime de sanctions déjà existantes. La première interrogation, soulevée à l’égard des sanctions administratives pécuniaires, et la plus fondamentale, était celle de savoir si le contrevenant devait bénéficier des protections constitutionnelles énoncées à l’article 11 de la Charte canadienne des droits et libertés, tel un inculpé face à une procédure pénale. Puisque nous concluons que ces sanctions relèvent uniquement du droit administratif, nous avons cherché à déterminer quel serait le contenu du devoir d’agir équitablement de l’Administration lors du processus d’émission et de contestation de la sanction administrative pécuniaire.

Development of new scenario decomposition techniques for linear and nonlinear stochastic programming

Une approche classique pour traiter les problèmes d’optimisation avec incertitude à deux- et multi-étapes est d’utiliser l’analyse par scénario. Pour ce faire, l’incertitude de certaines données du problème est modélisée par vecteurs aléatoires avec des supports finis spécifiques aux étapes. Chacune de ces réalisations représente un scénario. En utilisant des scénarios, il est possible d’étudier des versions plus simples (sous-problèmes) du problème original. Comme technique de décomposition par scénario, l’algorithme de recouvrement progressif est une des méthodes les plus populaires pour résoudre les problèmes de programmation stochastique multi-étapes. Malgré la décomposition complète par scénario, l’efficacité de la méthode du recouvrement progressif est très sensible à certains aspects pratiques, tels que le choix du paramètre de pénalisation et la manipulation du terme quadratique dans la fonction objectif du lagrangien augmenté. Pour le choix du paramètre de pénalisation, nous examinons quelques-unes des méthodes populaires, et nous proposons une nouvelle stratégie adaptive qui vise à mieux suivre le processus de l’algorithme. Des expériences numériques sur des exemples de problèmes stochastiques linéaires multi-étapes suggèrent que la plupart des techniques existantes peuvent présenter une convergence prématurée à une solution sous-optimale ou converger vers la solution optimale, mais avec un taux très lent. En revanche, la nouvelle stratégie paraît robuste et efficace. Elle a convergé vers l’optimalité dans toutes nos expériences et a été la plus rapide dans la plupart des cas. Pour la question de la manipulation du terme quadratique, nous faisons une revue des techniques existantes et nous proposons l’idée de remplacer le terme quadratique par un terme linéaire. Bien que qu’il nous reste encore à tester notre méthode, nous avons l’intuition qu’elle réduira certaines difficultés numériques et théoriques de la méthode de recouvrement progressif.

Determinants Of Firm Terminal Value: The Perspective Of North American And European Financial Analysts

Company valuation models attempt to estimate the value of a company in two stages: (1) comprising of a period of explicit analysis and (2) based on unlimited production period of cash flows obtained through a mathematical approach of perpetuity, which is the terminal value. In general, these models, whether they belong to the Dividend Discount Model (DDM), the Discount Cash Flow (DCF), or RIM (Residual Income Models) group, discount one attribute (dividends, free cash flow, or results) to a given discount rate. This discount rate, obtained in most cases by the CAPM (Capital asset pricing model) or APT (Arbitrage pricing theory) allows including in the analysis the cost of invested capital based on the risk taking of the attributes. However, one cannot ignore that the second stage of valuation that is usually 53-80% of the company value (Berkman et al., 1998) and is loaded with uncertainties. In this context, particular attention is needed to estimate the value of this portion of the company, under penalty of the assessment producing a high level of error. Mindful of this concern, this study sought to collect the perception of European and North American financial analysts on the key features of the company that they believe contribute most to its value. For this feat, we used a survey with closed answers. From the analysis of 123 valid responses using factor analysis, the authors conclude that there is great importance attached (1) to the life expectancy of the company, (2) to liquidity and operating performance, (3) to innovation and ability to allocate resources to R&D, and (4) to management capacity and capital structure, in determining the value of a company or business in long term. These results contribute to our belief that we can formulate a model for valuating companies and businesses where the results to be obtained in the evaluations are as close as possible to those found in the stock market

La protection de l'environnement par les sanctions administratives pécuniaires au Québec

Avec l’adoption le 4 octobre 2011 par l’Assemblée nationale du Québec du projet de loi 89 intitulé «Loi modifiant la Loi sur la qualité de l’environnement afin d’en renforcer le respect», le législateur est venu renforcer le régime de droit pénal en augmentant la sévérité des peines pour les infractions à Loi sur la qualité de l’environnement. Il a aussi élargi les pouvoirs d’intervention du ministre en lien avec les autorisations qu’il émet. Cependant, la principale réforme apportée par le projet de loi 89 qui touche aux mécanismes même de protection de l’environnement, est la création de toute pièce d’un régime de sanctions dites administratives pécuniaires, parallèlement au régime de sanctions déjà existantes. La première interrogation, soulevée à l’égard des sanctions administratives pécuniaires, et la plus fondamentale, était celle de savoir si le contrevenant devait bénéficier des protections constitutionnelles énoncées à l’article 11 de la Charte canadienne des droits et libertés, tel un inculpé face à une procédure pénale. Puisque nous concluons que ces sanctions relèvent uniquement du droit administratif, nous avons cherché à déterminer quel serait le contenu du devoir d’agir équitablement de l’Administration lors du processus d’émission et de contestation de la sanction administrative pécuniaire.

Pena de Morte em Portugal-UE, Brasil, Angola, Moçambique, Guiné-Bissau, Cabo Verde, S. Tomé e Princípe, Timor Leste, bem como China, Japão e Coreia do Sul - Direito Público;

1 – Resumo: a questão da pena de morte é tratada de modo muito diverso no mundo. Existem nomeadamente grandes diferenças no que concerne ao Oriente e Ocidente mundiais. Esta pesquisa compara um típico país da União Europeia, Portugal, bem como outros países da lusofonia, Brasil, Angola, Moçambique, Guiné-Bissau, Cabo Verde, S. Tomé e Princípe e Timor Leste com três exemplos asiáticos: a China, o Japão e a Coréia do Sul. Vê-se que não só as leis são bastante diferentes, mas que o que talvez mais difira a nível mundial seja a sua aplicação prática. § 1.1 Abstract: the issue of death penalty is treated very differently in the world. In particular, there are large differences between the Eastern and the Western hemispheres. This study compares a typical country of the European Union, Portugal, as well as other Lusophone countries, i.e. Brazil, Angola, Mozambique, Guinea-Bissau, Cape Verde, Sao Tome and Principe and East Timor, with three Asian examples: China, Japan and South Korea. It is shown that not only the laws are quite different, but that what possibly differs the most on a global level is their practical application.

27th International Police Executive Symposium, Washington DC, USA, Urban Security: Challenges for 21st Century Global Cities

Goncalo de Melo Bandeira Counter-Terrorism, State of Emergency and Human Rights. In the global cities, the fight against terrorism is a way forward. Prevention of terrorism is another possible way. There are legal systems where the prevailing idea is combating terrorism. Fight, because is possible: life imprisonment or informal death penalty or even torture. While other jurisdictions only follow the prevention of terrorist crime: the retribution and positive general prevention and the resocialization. There may be extreme cases also in restorative justice. The recent terrorist attacks in Paris on 11.13.2015 have shown to the different types of police several problems. Some of those are: the declaration of State of emergency and the consequent restriction of human rights as the privacy of human communication or the liberty of travel by local city citizens or foreign citizens or the public entertainment shows, the problem of money laundering and the restriction of the business as usual, the vicious circle of more isolation from some urban communities, v.g. muslims, and other citizens also; and, brevitatis causa, the criminological problem of the causes and consequences of terrorism.

Determining conservation priority areas for Palearctic passerine migrant birds in sub-Saharan Africa

Migratory bird species breeding in the Palearctic and overwintering in sub-Saharan Africa face multiple conservation challenges. As a result, many of these species have declined in recent decades, some dramatically. We therefore used the best available database for the distribution of 68 passerine migrants in sub-Saharan Africa to determine priority regions for their conservation. After modeling each species’ distribution using BIOMOD software, we entered the resulting species distributions at a 1° × 1° grid resolution into MARXAN software. We then used several different selection procedures that varied the boundary length modifier, species penalty factor, and the inclusion of grid cells with high human footprint and with protected areas. While results differed between selection procedures, four main regions were regularly selected: (1) one centered on southern Mali; (2) one including Eritrea, central Sudan, and northern Ethiopia; (3) one encompassing southwestern Kenya and much of Tanzania and Uganda; and (4) one including much of Zimbabwe and southwestern Zambia. We recommend that these four regions become priority regions for research and conservation efforts for the bird species considered in this study.

Estudio sobre la operatividad y eficacia de las multas en el marco de la contratación estatal

El trabajo de grado se estructuró en tres capítulos. El primero constituye un marco teórico sobre el cual se fundamentan los siguientes, pues se realiza un análisis de la cláusula penal en el derecho privado, incluidas las prácticas comerciales internacionales. El segundo capítulo aborda el tema de las multas en la contratación estatal, para lo cual se estudió la normatividad y jurisprudencia pertinente; en esa parte del escrito se incluyó el apartado correspondiente al derecho comparado. Finalmente, en el tercer capítulo, se formula una propuesta que permite hacer de esta medida coercitiva provisional una herramienta idónea para lograr el correcto y oportuno cumplimiento del contrato.

Vanadium Redox Flow Battery Storage System Linked to the Electric Grid

This paper focuses on technology state of the art for the charge/discharge of electric energy storage supported by vanadium redox flow battery linked to the electric grid. Properties of vanadium, the main configuration and the reaction of charge/discharge of a vanadium redox flow battery are addressed. The vanadium redox flow battery has the highest cell voltage among the other redox flow battery, implying higher power and energy density which favours application at power plants. This electric energy storage is viewed as a promising contribution to be integrated in power system due to a reasonably bulky size and to successful applications currently allowing storage of energy at power plants or at electrical grids. For instances, allowing storage of energy as an economic improvement providing spin reserve to avoid penalty for imbalances between the energy delivered and energy contracted at closing of electricity market or as an economic improvement to diminish the cost of electricity usage of a consumer. The vanadium redox flow battery has the advantages of scalability customized to meet requirements for power and energy capacity and of excellent combination of energy efficiency, capital cost and life cycle costs compared with other technology.