On the transfer matrix for a uniform tube with a moving medium

Abstract is not available.

New eight node serendipity quadrilateral plate bending element for thin and moderately thick plates using Integrated Force Method

A new 8-node serendipity quadrilateral plate bending element (MQP8) based on the Mindlin-Reissner theory for the analysis of thin and moderately thick plate bending problems using Integrated Force Method is presented in this paper. The performance of this new element (MQP8) is studied for accuracy and convergence by analyzing many standard benchmark plate bending problems. This new element MQP8 performs excellent in both thin and moderately thick plate bending situations. And also this element is free from spurious/zero energy modes and free from shear locking problem.

O6-Methylguanine Repair by O6-Alkylguanine-DNA Alkyltransferase

O6-Alkylguanine-DNA alkyltransferase (AGT) repairs O6-methylguanine (O6mG) in DNA that is known to cause Mutation and cancer. On the basis of Calculations performed using density functional theory involving the active site of AGT, a mechanism for catalytic demethylation of O6mG to guanine has been proposed. In this mechanism, roles of six amino acids, i.e., Cys145, His 146, Glu172, Tyr114, Lys165, and Ser159 in catalytic demethylation of O6mG are involved. This mechanism has three steps as follows. At the first step, Cys145 in the Cys145-water-His146-Glu172 tetrad is converted to cysteine thiolate anion while at the second step, abstraction of the Tyr114 proton by the N3 site of O6mG occurs in a barrierless manner. In the third step, abstraction of Lys165 proton by deprotonated Tyr114 and transfer of the methyl group of O6mG to the thiolate group of Cys145 anion Occur simultaneously. As AGT is a major target in cancer therapy, identification of the roles of the different amino acids in demethylation of O6mG is expected to be useful in designing efficient AGT inhibitors.

Inflammatory and coagulation disturbances in acute pancreatitis

Acute pancreatitis (AP), a common cause of acute abdominal pain, is usually a mild, self-limited disease. However, some 20-30% of patients develop a severe disease manifested by pancreatic necrosis, abscesses or pseudocysts, and/or extrapancreatic complications, such as vital organ failure (OF). Patients with AP develop systemic inflammation, which is considered to play a role in the pathogenesis of multiple organ failure (MOF). OF mimics the condition seen in patients with sepsis, which is characterized by an overwhelming production of inflammatory mediators, activation of the complement system and systemic activation of coagulation, as well as the development of disseminated intravascular coagulation (DIC) syndrome. Vital OF is the major cause of mortality in AP, along with infectious complications. About half of the deaths occur within the first week of hospitalization and thus, early identification of patients likely to develop OF is important. The aim of the present study was to investigate inflammatory and coagulation disturbances in AP and to find inflammatory and coagulation markers for predicting severe AP, and development of OF and fatal outcome. This clinical study consists of four parts. All of patients studied had AP when admitted to Helsinki University Central Hospital. In the first study, 31 patients with severe AP were investigated. Their plasma levels of protein C (PC) and activated protein C (APC), and monocyte HLA-DR expression were studied during the treatment period in the intensive care unit; 13 of these patients developed OF. In the second study, the serum levels of complement regulator protein CD59 were studied in 39 patients during the first week of hospitalization; 12 of them developed OF. In the third study, 165 patients were investigated; their plasma levels of soluble form of the receptor for advanced glycation end products (sRAGE) and high mobility group box 1 (HMGB1) protein were studied during the first 12 days of hos-pitalization; 38 developed OF. In the fourth study, 33 patients were studied on admission to hospital for plasma levels of prothrombin fragment F1+2 and tissue factor pathway inhibitor (TFPI), and thrombin formation capacity by calibrated automated thrombogram (CAT); 9 of them developed OF. Our results showed significant PC deficiency and decreased APC generation in patients with severe AP. The PC pathway defects seemed to be associated with the development of OF. In patients who developed OF, the levels of serum CD59 and plasma sRAGE, but not of HMGB1, were significantly higher than in patients who recovered without OF. The high CD59 levels on admission to the hospital seemed to be predictive for severe AP and OF. The median of the highest sRAGE levels was significantly higher in non-survivors than in survivors. No significant difference between the patient groups was found in the F1+2 levels. The thrombograms of all patients were disturbed in their shape, and in 11 patients the exogenous tissue factor did not trigger thrombin generation at all ( flat curve ). All of the patients that died displayed a flat curve. Free TFPI levels and free/total TFPI ratios were significantly higher in patients with a flat curve than in the others, and these levels were also significantly higher in non-survivors than in survivors. The flat curve in combination with free TFPI seemed to be predictive for a fatal outcome in AP.

Depressive Disorders in Primary Health Care

The Vantaa Primary Care Depression Study (PC-VDS) is a naturalistic and prospective cohort study concerning primary care patients with depressive disorders. It forms a collaborative research project between the Department of Mental and Alcohol Research of the National Public Health Institute, and the Primary Health Care Organization of the City of Vantaa. The aim is to obtain a comprehensive view on clinically significant depression in primary care, and to compare depressive patients in primary care and in secondary level psychiatric care in terms of clinical characteristics. Consecutive patients (N=1111) in three primary care health centres were screened for depression with the PRIME-MD, and positive cases interviewed by telephone. Cases with current depressive symptoms were diagnosed face-to-face with the Structured Clinical Interview for DSM-IV Axis I Disorders (SCID-I/P). A cohort of 137 patients with unipolar depressive disorders, comprising all patients with at least two depressive symptoms and clinically significant distress or disability, was recruited. The Structured Clinical Interview for DSM-IV Axis II Disorders (SCID-II), medical records, rating scales, interview and a retrospective life-chart were used to obtain comprehensive cross-sectional and retrospective longitudinal information. For investigation of suicidal behaviour the Scale for Suicidal Ideation (SSI), patient records and the interview were used. The methodology was designed to be comparable to The Vantaa Depression Study (VDS) conducted in secondary level psychiatric care. Comparison of major depressive disorder (MDD) patients aged 20-59 from primary care in PC-VDS (N=79) was conducted with new psychiatric outpatients (N =223) and inpatients (N =46) in VDS. The PC-VDS cohort was prospectively followed up at 3, 6 and 18 months. Altogether 123 patients (90%) completed the follow-up. Duration of the index episode and the timing of relapses or recurrences were examined using a life-chart. The retrospective investigation revealed current MDD in most (66%), and lifetime MDD in nearly all (90%) cases of clinically significant depressive syndromes. Two thirds of the “subsyndromal” cases had a history of major depressive episode (MDE), although they were currently either in partial remission or a potential prodromal phase. Recurrences and chronicity were common. The picture of depression was complicated by Axis I co-morbidity in 59%, Axis II in 52% and chronic Axis III disorders in 47%; only 12% had no co-morbidity. Within their lifetimes, one third (37%) had seriously considered suicide, and one sixth (17%) had attempted it. Suicidal behaviour clustered in patients with moderate to severe MDD, co-morbidity with personality disorders, and a history of treatment in psychiatric care. The majority had received treatment for depression, but suicidal ideation had mostly remained unrecognised. The comparison of patients with MDD in primary care to those in psychiatric care revealed that the majority of suicidal or psychotic patients were receiving psychiatric treatment, and the patients with the most severe symptoms and functional limitations were hospitalized. In other clinical aspects, patients with MDD in primary care were surprisingly similar to psychiatric outpatients. Mental health contacts earlier in the current MDE were common among primary care patients. The 18-month prospective investigation with a life-chart methodology verified the chronic and recurrent nature of depression in primary care. Only one-quarter of patients with MDD achieved and maintained full remission during the follow-up, while another quarter failed to remit at all. The remaining patients suffered either from residual symptoms or recurrences. While severity of depression was the strongest predictor of recovery, presence of co-morbid substance use disorders, chronic medical illness and cluster C personality disorders all contributed to an adverse outcome. In clinical decision making, beside severity of depression and co-morbidity, history of previous MDD should not be ignored by primary care doctors while depression there is usually severe enough to indicate at least follow-up, and concerning those with residual symptoms, evaluation of their current treatment. Moreover, recognition of suicidal behaviour among depressed patients should also be improved. In order to improve outcome of depression in primary care, the often chronic and recurrent nature of depression should be taken into account in organizing the care. According to literature management programs of a chronic disease, with enhancement of the role of case managers and greater integration of primary and specialist care, have been successful. Optimum ways of allocating resources between treatment providers as well as within health centres should be found.

Serial Changes in Markers Measuring Coagulation, Fibrinolysis, and Vasoactivity in Patients with Ischemic Stroke

Ischemic stroke (IS) is a heterogeneous disease in which outcome is influenced by many factors. The hemostatic system is activated in association with cerebral ischemia, and thus, markers measuring coagulation, fibrinolysis, and vasoactivity could be useful tools in clinical practice. We investigated whether repeated measurements of these markers reveal patterns that might help in evaluating IS patients, including the early diagnosis of stroke subtypes, in estimating prognosis and risk of recurrence, and in selecting a treatment for secondary prevention of stroke. Vasoconstrictor peptide endothelin-1 (ET-1), homocysteine (Hcy), indicators of thrombin formation and activation (prothrombin fragment 1+2/F1+2, thrombin-antithrombin complex/TAT), indicators of plasmin formation and fibrinolysis (tissue plasminogen activator/t-PA, plasminogen activator inhibitor-1/PAI-1, and D-dimer), and natural anticoagulants (antithrombin/AT, protein C/PC, and protein S/PS) were measured in 102 consecutive mild to moderate IS patients on four occasions: on admission and at 1 week, 1 month, and 3 months after stroke, and once in controls. All patients underwent neurological examination and blood sampling in the same session. Furthermore, 42 IS patients with heterozygous factor V Leiden mutation (FVLm) were selected from 740 IS patients without an obvious etiology, and evaluated in detail for specific clinical, laboratory, and radiological features. Measurements of ET-1 and Hcy levels did not disclose information that could aid in the diagnostic evaluation of IS patients. F1+2 level at 3 months after IS had a positive correlation with recurrence of thromboembolic events, and thus, may be used as a predictive marker of subsequent cerebral events. The D-dimer and AT levels on admission and 1 week after IS were strongly associated with stroke severity, outcome, and disability. The specific analysis of IS patients with FVLm more often revealed a positive family history of thrombosis, a higher prevalence of peripheral vascular disease, and multiple infarctions in brain images, most of which were `silent infarcts´. Results of this study support the view that IS patients with sustained activation of both the fibrinolytic and the coagulation systems and increased thrombin generation may have an unfavorable prognosis. The level of activation may reflect the ongoing thrombotic process and the extent of thrombosis. Changes in these markers could be useful in predicting prognosis of IS patients. A clear need exists for a randomized prospective study to determine whether a subgroup of IS patients with markers indicating activation of fibrinolytic and coagulation systems might benefit from more aggressive secondary prevention of IS.

Line removal and restoration of handwritten strokes

In document images, we often find printed lines over-lapping with hand written elements especially in case of signatures. Typical examples of such images are bank cheques and payment slips. Although the detection and removal of the horizontal lines has been addressed, the restoration of the handwritten area after removal of lines, persists to be a problem of interest. lit this paper, we propose a method for line removal and restoration of the erased areas of the handwritten elements. Subjective evaluation of the results have been conducted to analyze the effectiveness of the proposed method. The results are promising with an accuracy of 86.33%. The entire Process takes less than half a second for completion on a 2.4 GHz 512 MB RAM Pentium IV PC for a document image.

Entropy based Skew correction of document images

The document images that are fed into an Optical Character Recognition system, might be skewed. This could be due to improper feeding of the document into the scanner or may be due to a faulty scanner. In this paper, we propose a skew detection and correction method for document images. We make use of the inherent randomness in the Horizontal Projection profiles of a text block image, as the skew of the image varies. The proposed algorithm has proved to be very robust and time efficient. The entire process takes less than a second on a 2.4 GHz Pentium IV PC.

3D extracellular matrix interactions modulate tumour cell growth, invasion and angiogenesis in engineered tumour microenvironments

Interactions between tumour cells and extracellular matrix proteins of the tumour microenvironment play crucial roles in cancer progression. So far, however, there are only a few experimental platforms available that allow us to study these interactions systematically in a mechanically defined three-dimensional (3D) context. Here, we have studied the effect of integrin binding motifs found within common extracellular matrix (ECM) proteins on 3D breast (MCF-7) and prostate (PC-3, LNCaP) cancer cell cultures, and co-cultures with endothelial and mesenchymal stromal cells. For this purpose, matrix metalloproteinase-degradable biohybrid poly(ethylene) glycol-heparin hydrogels were decorated with the peptide motifs RGD, GFOGER (collagen I), or IKVAV (laminin-111). Over 14 days, cancer spheroids of 100-200µm formed. While the morphology of poorly invasive MCF-7 and LNCaP cells was not modulated by any of the peptide motifs, the aggressive PC-3 cells exhibited an invasive morphology when cultured in hydrogels comprising IKVAV and GFOGER motifs compared to RGD motifs or nonfunctionalised controls. PC-3 (but not MCF-7 and LNCaP) cell growth and endothelial cell infiltration were also significantly enhanced in IKVAV and GFOGER presenting gels. Taken together, we have established a 3D culture model that allows for dissecting the effect of biochemical cues on processes relevant to early cancer progression. These findings provide a basis for more mechanistic studies that may further advance our understanding of how ECM modulates cancer cell invasion and how to ultimately interfere with this process.

Visibility volumes for interactive path optimization

We describe a real-time system that supports design of optimal flight paths over terrains. These paths either maximize view coverage or minimize vehicle exposure to ground. A volume-rendered display of multi-viewpoint visibility and a haptic interface assists the user in selecting, assessing, and refining the computed flight path. We design a three-dimensional scalar field representing the visibility of a point above the terrain, describe an efficient algorithm to compute the visibility field, and develop visual and haptic schemes to interact with the visibility field. Given the origin and destination, the desired flight path is computed using an efficient simulation of an articulated rope under the influence of the visibility gradient. The simulation framework also accepts user input, via the haptic interface, thereby allowing manual refinement of the flight path.

Trial of the Primary Care Practice Improvement Tool: Building organisational performance in Australian general practice and primary health care

Objective: To nationally trial the Primary Care Practice Improvement Tool (PC-PIT), an organisational performance improvement tool previously co-created with Australian primary care practices to increase their focus on relevant quality improvement (QI) activities. Design: The study was conducted from March to December 2015 with volunteer general practices from a range of Australian primary care settings. We used a mixed-methods approach in two parts. Part 1 involved staff in Australian primary care practices assessing how they perceived their practice met (or did not meet) each of the 13 PC-PIT elements of high-performing practices, using a 1–5 Likert scale. In Part 2, two external raters conducted an independent practice visit to independently and objectively assess the subjective practice assessment from Part 1 against objective indicators for the 13 elements, using the same 1–5 Likert scale. Concordance between the raters was determined by comparing their ratings. In-depth interviews conducted during the independent practice visits explored practice managers’ experiences and perceived support and resource needs to undertake organisational improvement in practice. Results: Data were available for 34 general practices participating in Part 1. For Part 2, independent practice visits and the inter-rater comparison were conducted for a purposeful sample of 19 of the 34 practices. Overall concordance between the two raters for each of the assessed elements was excellent. Three practice types across a continuum of higher- to lower-scoring practices were identified, with each using the PC-PIT in a unique way. During the in-depth interviews, practice managers identified benefits of having additional QI tools that relate to the PC-PIT elements. Conclusions: The PC-PIT is an organisational performance tool that is acceptable, valid and relevant to our range of partners and the end users (general practices). Work is continuing with our partners and end users to embed the PC-PIT in existing organisational improvement programs.

Adhesively-bonded Patch Repair with Composites

Adhesively-bonded composite patch repairs over cracked or corrosion-damaged metallic aircraft structures have shown great promise for extending life of ageing structures. This study presents the numerical investigation into the interface behaviour of adhesively-bonded cracked aluminum alloy substrate patched with fibre-reinforced composite material. The adhesive is modelled as an elasto-plastic bilinear material to characterise the debond behaviour, while the defective substrate is regarded as linear elastic continuum. Two typical patch shapes were selected based on information available in the literature. Geometric and material nonlinear analyses for square and octagonal patches were performed to capture peel and shear stresses developed between the substrate and the patch to examine the possibility of interface delamination/debonding. Parametric studies on adhesive thickness and patch thickness were carried out to predict their infuence on damage tolerance of repaired structures.

Crystallographic Evolution, Dielectric, and Piezoelectric Properties of Bi4Ti3O12:W/Cr Ceramics

W/Cr codoped Bi4Ti3O12 ceramics, Bi4Ti3-xWxO12+x+0.2 wt%Cr2O3 (BITWC, x=0-0.15), were prepared using a solid-state reaction method. The crystallographic evolution and phase analysis were distinctly determined focusing on the X-ray diffraction peak changes in (020)/(200) and (220)/(1115) diffraction planes, by which the lattice parameters, a, b, and c can be refined. The thermal variations of permittivity, dielectric loss (tan delta), impedance, and electrical conductivity properties were characterized. A decrease in the values of Curie temperature from 675 degrees to 640 degrees C and an increase in the values of the dielectric constant due to an increase of W6+/Cr3+ content were observed. The highest piezoelectric constant, d(33) of 22 pC/N, was achieved with the composition of Bi4Ti2.975W0.025O12.025+0.2 wt% Cr2O3. Also, this composition had a lower electrical conductivity than the other investigated compositions.

Behaviour of Bi-adhesive Joints

The use of relatively low modulus adhesive at the ends of overlap in a bi-adhesive bondline of a bonded joint can reduce the stress concentration significantly and, therefore, potentially lead to higher strength of the joint. This study presents the two-dimensional and three-dimensional nonlinear (geometric and material) finite element analyses of adhesively bonded single lap joints having modulus-graded bondline under monotonic loading conditions. The adhesives were modelled as an elasto-plastic multi-linear material, while the substrates were regarded as both linear elastic and bi-linear elasto-plastic material. The computational simulations have been performed to investigate the bondline behaviour by studying the stress and strain distributions both at the mid-plane as well as at the interface of the bondline. It has been observed that the static strength is higher for joints with bi-adhesive bondlines compared to those with single adhesives in bondline. Higher joint strength has also been observed for optimum bi-adhesive bondline ratio through parametric studies. Effects of load level, and bondline thickness on stress distribution in the bi-adhesive bondline have also been studied. 3D analysis results reveal the existence of complex multi-axial stress/strain state at the ends of the overlap in the bondline which cannot be observed in 2D plane strain analysis. About 1/3rd of the width of the joint from the free edge in the width direction has 3D stress state, especially in the compliant adhesive of the bondline. Magnitudes of longitudinal and lateral stress/strain components are comparable to peel stress/strain components. It has also been analytically shown that the in-plane global stiffness of the joint remains unaffected by modulus gradation of the bondline adhesive. (C) Koninklijke Brill NV, Leiden, 2010.