In Vitro Susceptibility of Environmental Isolates of Exophiala dermatitidis to Five Antifungal Drugs

Several dematiaceous fungi frequently isolated from nature are involved in cases of superficial lesions to lethal cerebral infections. Antifungal susceptibility data on environmental and clinical isolates are still sparse despite the advances in testing methods. The objective of this study was to examine the activities of 5-flucytosine, amphotericin B, itraconazole, voriconazole and terbinafine against environmental isolates of Exophiala strains by minimum inhibition concentration (MIC) determination. The strains were obtained from hydrocarbon-contaminated soil, ant cuticle and fungal pellets from the infrabuccal pocket of attine gynes. Broth microdilution assay using M38-A2 reference methodology for the five antifungal drugs and DNA sequencing for fungal identification were applied. Terbinafine was the most active drug against the tested strains. It was observed that amphotericin B was less effective, notably against Exophiala spinifera, also studied. High MICs of 5-flucytosine against Exophiala dermatitidis occurred. This finding highlights the relevance of studies on the antifungal resistance of these potential opportunistic species. Our results also contribute to a future improvement of the standard methods to access the drug efficacy currently applied to black fungi. © 2012 Springer Science+Business Media Dordrecht.

Equivalent representation of mutual coupling in transmission lines by discrete element

This paper describes a computational model based on lumped elements for the mutual coupling between phases in transmission lines without the explicit use of modal transformation matrices. The self and mutual parameters and the coupling between phases are modeled using modal transformation techniques. The modal representation is developed from the intrinsic consideration of the modal transformation matrix and the resulting system of time-domain differential equations is described as state equations. Thus, a detailed profile ofthe currents and the voltages through the line can be easily calculated using numerical or analytical integration methods. However, the original contribution of the article is the proposal of a time-domain model without the successive phase/mode transformations and a practical implementation based on conventional electrical circuits, without the use of electromagnetic theory to model the coupling between phases. © 2003-2012 IEEE.

A finite element approach for predicting the ultimate rotation capacity of RC beams

This paper presents a numerical approach to model the complex failure mechanisms that define the ultimate rotational capacity of reinforced concrete beams. The behavior in tension and compression is described by a constitutive damage model derived from a combination of two specific damage models [1]. The nonlinear behavior of the compressed region is treated by the compressive damage model based on the Drucker-Prager criterion written in terms of the effective stresses. The tensile damage model employs a failure criterion based on the strain energy associated with the positive part the effective stress tensor. This model is used to describe the behavior of very thin bands of strain localization, which are embedded in finite elements to represent multiple cracks that occur in the tensioned region [2]. The softening law establishes dissipation energy compatible with the fracture energy of the concrete. The reinforcing steel bars are modeled by truss elements with elastic-perfect plastic behavior. It is shown that the resulting approach is able to predict the different stages of the collapse mechanism of beams with distinct sizes and reinforcement ratios. The tensile damage model and the finite element embedded crack approach are able to describe the stiffness reduction due to concrete cracking in the tensile zone. The truss elements are able to reproduce the effects of steel yielding and, finally, the compressive damage model is able to describe the non-linear behavior of the compressive zone until the complete collapse of the beam due to crushing of concrete. The proposed approach is able to predict well the plastic rotation capacity of tested beams [3], including size-scale effects.

Influence of the implant diameter with different sizes of hexagon: Analysis by 3-dimensional finite element method

The aim of this study was to evaluate the stress distribution in implants of regular platforms and of wide diameter with different sizes of hexagon by the 3-dimensional finite element method. We used simulated 3-dimensional models with the aid of Solidworks 2006 and Rhinoceros 4.0 software for the design of the implant and abutment and the InVesalius software for the design of the bone. Each model represented a block of bone from the mandibular molar region with an implant 10 mm in length and different diameters. Model A was an implant 3.75 mm/regular hexagon, model B was an implant 5.00 mm/regular hexagon, and model C was an implant 5.00 mm/ expanded hexagon. A load of 200 N was applied in the axial, lateral, and oblique directions. At implant, applying the load (axial, lateral, and oblique), the 3 models presented stress concentration at the threads in the cervical and middle regions, and the stress was higher for model A. At the abutment, models A and B showed a similar stress distribution, concentrated at the cervical and middle third; model C showed the highest stresses. On the cortical bone, the stress was concentrated at the cervical region for the 3 models and was higher for model A. In the trabecular bone, the stresses were less intense and concentrated around the implant body, and were more intense for model A. Among the models of wide diameter (models B and C), model B (implant 5.00 mm/regular hexagon) was more favorable with regard to distribution of stresses. Model A (implant 3.75 mm/regular hexagon) showed the largest areas and the most intense stress, and model B (implant 5.00 mm/regular hexagon) showed a more favorable stress distribution. The highest stresses were observed in the application of lateral load.

Susceptibility of multispecies biofilm to photodynamic therapy using Photodithazine®

This in vitro study evaluated the effect of photodynamic therapy (PDT) on the multispecies biofilm of Candida albicans, Candida glabrata, and Streptococcus mutans. Standardized fungal and bacterial suspensions were cultivated appropriately for each species and inoculated in 96-well microtiter plates for mix-biofilm formation. After 48 h of incubation, the biofilms were submitted to PDT (P + L+) using Photodithazine® (PDZ) at 100, 150, 175, 200, or 250 mg/mL for 20 min and 37.5 J/cm2 of light-emitting diode (LED) (660 nm). Additional samples were treated only with PDZ (P + L-) or LED (P-L+), or neither (control, P-L-). Afterwards, the biofilms were evaluated by quantification of colonies (CFU/mL), metabolic activity (XTT reduction assay), total biomass (crystal violet staining), and confocal scanning laser microscopy (CSLM). Data were analyzed by one-way ANOVA and Tukey tests (p < 0.05). Compared with the control, PDT promoted a significant reduction in colonies viability of the three species evaluated with 175 and 200 mg/mL of PDZ. PDT also significantly reduced the metabolic activity of the biofilms compared with the control, despite the PDZ concentration. However, no significant difference was found in the total biomass of samples submitted or not to PDT. For all analysis, no significant difference was verified among P-L-, P + L-, and P-L+. CSLM showed a visual increase of dead cells after PDT. PDT-mediated PDZ was effective in reducing the cell viability of multispecies biofilm. © 2013 Springer-Verlag London.

Stress susceptibility in pigs supplemented with ractopamine

Ractopamine is a β-adrenergic agonist used as an energy repartitioning agent in the diets of finishing pigs. Most ractopamine studies are limited to evaluations of growth performance and meat quality, and there is little information on the effects of this additive on the behavior and welfare of pigs. Therefore, the objective of this study was to evaluate various indicators of stress caused by feeding diets containing ractopamine. One hundred seventy barrows and 170 gilts weighing 107.3 kg were allocated to 30 pens with 10 to 12 barrows or gilts per pen. Pigs were offered 1 of the 3 dietary treatments (0, 5, or 10 mg ractopamine/kg) for 28 d with 5 barrow pens and 5 gilt pens per treatment. Pigs were evaluated for behavior 3 d per week 1 wk before the initiation of the experiment and throughout the experiment. Each pig was classified into 1 of the 13 activities (drinking water, lying alone, lying in clusters, standing, nosing pig, sitting, feeding, biting pig, walking, exploring, running away, playing, and mounting pen mates) and also grouped into 1 of the 3 categories (calm, moving, and feeding themselves) based on those activities. At the end of the experiment, 3 pigs from each pen were slaughtered, and blood samples were collected during exsanguination to determine physiological indicators of stress (cortisol, lactate, and creatine-kinase enzymes). The incidence of skin and carcass lesions was determined at shoulder, loin, and ham. Ractopamine had no effect (P > 0.05) on pig behavior, total number of skin and carcass lesions, or blood concentrations of cortisol or lactate. However, there was an increase (P < 0.05) of creatine kinase concentrations in pigs receiving ractopaminesupplemented feed. This finding is consistent with the concept that ractopamine may cause muscular disorders, and this warrants further investigation. © 2013 American Society of Animal Science. All rights reserved.

Susceptibility profile of a Brazilian yeast stock collection of Candida species isolated from subjects with Candida-associated denture stomatitis with or without diabetes

Objective: This study investigated the susceptibility of 198 clinical isolates of Candida species against caspofungin, amphotericin B, itraconazole, and fluconazole. Study Design: Suspensions of the microorganisms were spread on Roswell Park Memorial Institute (RPMI) agar plates. Etest strips were placed on the plates, and the minimal inhibitory concentration (MIC) was read after incubation (48 h at 37°C). Data were analyzed by a factorial analysis of variance and a 2 × 2 post hoc test (α = .05). Results: C glabrata showed the highest MIC values (P < .001) against caspofungin, itraconazole, and fluconazole. For amphotericin B, the MIC values of C tropicalis and C glabrata (P = .0521) were higher than those of C albicans (P < .001). Itraconazole was the least effective antifungal; 93.3% of the C glabrata isolates, 3.3% of the C albicans, and 1.3% of the C tropicalis were resistant. All microorganisms were susceptible to caspofungin and amphotericin B. Conclusions: Caspofungin and amphotericin B should be recommended as an effective alternative for the management of oral Candida infections when treatment with topical or other systemic drugs has definitely failed. © 2013 Elsevier Inc. All rights reserved.

Molecular identification and antimicrobial susceptibility of Nocardia spp. isolated from bovine mastitis in Brazil

Nocardia spp. infections can cause severe damage to the mammary gland due to suppurative pyogranulomatous lesions and lack of clinical cure in response to conventional antimicrobial therapy. Although Nocardia infections are considered relatively uncommon in cows, there has been an apparent worldwide increase in the incidence of bovine mastitis caused by Nocardia spp, perhaps due to environmental transmission of this ubiquitous pathogen. The objectives of present study were to determine: (i) species distribution of 80 Nocardia isolates involved in bovine mastitis (based on molecular methods); and (ii) antimicrobial susceptibility pattern of all isolates from three geographical areas in Brazil. In this study, Nocardia nova (80%) was the most frequently isolated species, followed by Nocardia farcinica (9%). Additionally, Nocardia puris, Nocardia cyriacigeorgica, Nocardia veterana, Nocardia africana, and Nocardia arthritidis were detected using 16S rRNA sequencing. This is apparently the first report of N. puris, N. veterana, N. cyriacigeorgica, N. arthritidis and N. africana in association with bovine mastitis. Based on the disk diffusion test, isolates were most frequently resistant to cloxacillin (75%), ampicillin (55%) and cefoperazone (47%), whereas few Nocardia spp. were resistant to amikacin, cefuroxime or gentamicin. © 2013 Elsevier B.V. All rights reserved.

Interleukin 4 haplotypes of susceptibility to chronic periodontitis are associated with IL-4 protein levels but not with clinical outcomes of periodontal therapy

Different IL4 haplotypes were associated to susceptibility to/or protection against chronic periodontitis (CP). The aim of this study was to investigate if individuals carrying different haplotypes would present differences in clinical periodontal parameters and in the IL-4 levels at baseline, 45 and 90 days after non-surgical periodontal therapy. 62 patients were subdivided: genetically protected without CP (PH), genetically protected with CP (PCP), genetically susceptible with CP (SCP), genetically susceptible without CP (healthy) (SH). Clinical examination and gingival crevicular fluid (GCF) collection were performed for all patients, and IL-4 levels were measured by ELISA. At baseline, higher values for plaque index (PI, p = 0.013), gingival index (GI, p = 0.005) were observed for the SCP group in comparison to the PCP group but not after the completion of periodontal therapy. 45 and 90 days after the non-surgical therapy, PCP demonstrated significantly higher IL-4 levels than the SCP (p = 0.000002). Correlation analysis showed different results between clinical parameters and IL-4 production or GCF volume for groups with different genetic loads. The IL4 gene which was previously associated with susceptibility to CP was related with differences in the IL-4 protein levels in the GCF. However, independent of genetic carriage, individuals responded similarly to this therapy. © 2013 American Society for Histocompatibility and Immunogenetics.

Stress analysis in bone tissue around single implants with different diameters and veneering materials: A 3-D finite element study

The aimof this study was to evaluate the stress distribution on bone tissue with a single prosthesis supported by implants of large and conventional diameter and presenting different veneering materials using the 3-D finite elementmethod. Sixteenmodels were fabricated to reproduce a bone block with implants, using two diameters (3.75 × 10 mmand 5.00 × 10 mm), four different veneering materials (composite resin, acrylic resin, porcelain, and NiCr crown), and two loads (axial (200 N) and oblique (100 N)). For data analysis, the maximum principal stress and vonMises criterion were used. For the axial load, the cortical bone in allmodels did not exhibit significant differences, and the trabecular bone presented higher tensile stresswith reduced implant diameter. For the oblique load, the cortical bone presented a significant increase in tensile stress on the same side as the loading for smaller implant diameters. The trabecular bone showed a similar but more discreet trend. There was no difference in bone tissue with different veneering materials. The veneering material did not influence the stress distribution in the supporting tissues of single implant-supported prostheses. The large-diameter implants improved the transference of occlusal loads to bone tissue and decreased stress mainly under oblique loads.Oblique loading was more detrimental to distribution stresses than axial loading. © 2013 Elsevier B.V. All rights reserved.

Resistência à cárie de esmalte dental irradiado por lasers de Er:YAG e Nd:YAG, avaliada através da morfologia e proporção Ca/P

Pós-graduação em Ciências Odontológicas - FOAR

Evolução metamórfica P-T-t da porção norte do complexo Guaxupé na região de Arceburgo - Santa Cruz da Prata, MG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Susceptibility of Cebus apella monkey (Primates: Cebidae) to experimental Leishmania (L.) infantum chagasi-infection

Na Amazônia Brasileira, o macaco Cebus apella (Primata: Cebidae) tem sido associado com o ciclo enzoótico da Leishmania (V.) shawi, um parasito dermotrópico causador da Leishmaniose Tegumentar Americana (LTA). Ele tem sido também empregado com sucesso como modelo experimental para estudo da leishmaniose tegumentar. Neste trabalho, foi investigada sua susceptibilidade à infecção experimental por Leishmania (L.) infantum chagasi, o agente etiológico da Leishmaniose Visceral Americana (LVA). Foram usados dez espécimes de C. apella oito adultos e dois jovens, quatro machos e seis fêmeas, todos nascidos e criados em cativeiro. Dois protocolos de infecção experimental foram feitos: i) seis macacos foram inoculados por via intradérmica (ID), na base da cauda com 2x106 formas promastigotas em fase estacionária de crescimento; ii) outros quatro macacos foram inoculados com 3x107 formas amastigotas de infecção visceral de hamsteres por duas vias diferentes: a) dois por via intravenosa (IV) e, b) outros dois pela via intraperitoneal (IP). A avaliação da infecção incluiu parâmetros: clínico: exame físico do abdômen, peso e temperatura corporal; b) parasitológico: aspirado de medula óssea por agulha para procura de amastigotas (esfregaço corado por Giemsa) e formas promastigotas (meio de cultura); c) imunológico: Reação de Imunofluorescência Indireta (RIFI) e, resposta de hipersensibilidade tardia (DTH). Nos seis macacos inoculados ID (formas promastigotas) todos os parâmetros de avaliação da infecção foram negativos durante o período de 12 meses. Entre os quatro macacos inoculados com formas amastigotas, dois inoculados IV mostraram parasitos na medula óssea do primeiro ao sexto mês p.i. e em seguida houve a resolução da infecção, no entanto os outros dois inoculados IP foram totalmente negativos. Esses quatro macacos apresentaram resposta específica de anticorpo IgG desde o terceiro mês p.i. (IP: 1/80 e IV: 1/320) até o décimo segundo mês (IP: 1/160 e IV: 1/5120). A conversão DTH ocorreu em apenas um macaco inoculado IV com uma forte reação na pele (30 mm). Considerando esses resultados, nós não recomendamos o uso do macaco C. apella como modelo animal para estudo da LVA.

Caracterização de Escherichia coli Shigatoxigênica isolada em estabelecimentos comerciais no município de Taquaritinga, S.P

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The mineralogy and chemistry of the German and Portuguese tiles used to face a historic building in the Amazon region and their natural susceptibility to tropical weathering

As proeminentes edificações da cidade de Belém foram revestidas durante o século 19 com azulejos produzidos em Portugal e Alemanha que já apresentam distintos graus de degradação. O Palacete Pinho é uma das mais importantes destas edificações e foi selecionado para se investigar a ação do clima tropical amazônico sobre a degradação destes azulejos. Para atingir estes objetivos mapearam-se os azulejos desta edificação visando identificar as modificações de origem orgânica e inorgânica e coletas de amostras para análises. Os minerais foram determinados por DRX, a composição química por métodos clássicos úmidos e MEV/SED e os micro-organismos por microscopia. Os resultados obtidos mostram que os azulejos Portugueses e Alemães são distintos entre si. Enquanto o biscoito é composto de SiO₂ e Al₂O₃, CaO foi encontrado apenas nos Portugueses. Os baixos conteúdos de Na₂O e K₂O indicam adição de materiais para redução da temperatura de fusão. SiO₂ e PbO compõem o vidrado, já CoO e FeO foram adicionados como pigmentos. O biscoito dos azulejos Alemães é constituído de quartzo, mullita e cristobalita, ao contrário do Português com quartzo, gehlenita, diopsídio, calcita e feldspatos. Os vidrados são amorfos ao DRX. As diferenças químicas e mineralógicas entre os azulejos Portugueses e Alemães indicam que foram produzidos por matéria prima distinta, bem como processo termal. As alterações relacionadas com o intemperismo são as finas camadas de detritos (nos Alemães), manchas de oxidação, manchas escuras, descolamento do azulejo (no Português); perda de vidrado e biscoito tornando-se pulverulento como consequência do estabelecimento de Cyanophyta e bacillariophyta (Português). As distintas feições de degradação dos azulejos refletem as suas diferenças mineralógicas e químicas expostas ao clima tropical Amazônico.