Impact of ocean acidification and warming on the Mediterranean mussel (Mytilus galloprovincialis)

In order to assess the effects of ocean acidification and warming on the Mediterranean mussel (Mytilus galloprovincialis), specimens were reared in aquarium tanks and exposed to elevated conditions of temperature (+3°C) and acidity (-0.3 pH units) for a period of 10 months. The whole system comprised a factorial experimental design with 4 treatments (3 aquaria per treatment): control, lowered pH, elevated temperature, and lowered pH/elevated temperature. Mortality was estimated on a weekly basis and every 2 months, various biometrical parameters and physiological processes were measured: somatic and shell growth, metabolic rates and body fluid acid-base parameters. Mussels were highly sensitive to warming, with 100% mortality observed under elevated temperature at the end of our experiment in October. Mortality rates increased drastically in summer, when water temperature exceeded 25°C. In contrast, our results suggest that survival of this species will not be affected by a pH decrease of 0.3 in the Mediterranean Sea. Somatic and shell growth did not appear very sensitive to ocean acidification and warming during most of the experiment, but were reduced, after summer, in the lowered pH treatment. This was consistent with measured shell net dissolution and observed loss of periostracum, as well as uncompensated extracellular acidosis in the lowered pH treatment indicating a progressive insufficiency in acid-base regulation capacity. However, based on the present dataset, we cannot elucidate if these decreases in growth and regulation capacities after summer are a consequence of lower pH levels during that period or a consequence of a combined effect of acidification and warming. To summarize, while ocean acidification will potentially contribute to lower growth rates, especially in summer when mussels are exposed to sub-optimal conditions, ocean warming will likely pose more serious threats to Mediterranean mussels in this region in the coming decades.

Effects of birth order and sibling sex composition on human capital investment in children in India

The paper explores the effects of birth order and sibling sex composition on human capital investment in children in India using the Indian Human Development Survey (IHDS). Endogeneity of fertility is addressed using instruments and controlling for household fixed effects. Family size effect is also distinguished from the sibling sex composition effect. Previous literature has often failed to take endogeneity into account and shows a negative birth order effect for girls in India. Once endogeneity of fertility is addressed, there is no evidence for a negative birth order effect or sibling sex composition effect for girls. Results show that boys are worse off in households that have a higher proportion of boys specifically when they have older brothers.

Effect of endurance, speed and strength training on skin temperature measured by infrared thermography = Efecto del entrenamiento de resistencia, velocidad y fuerza en la temperatura de la piel a través de la termografía infrarroja

La termografía infrarroja (TI) es una técnica no invasiva y de bajo coste que permite, con el simple acto de tomar una fotografía, el registro sin contacto de la energía que irradia el cuerpo humano (Akimov & Son’kin, 2011, Merla et al., 2005, Ng et al., 2009, Costello et al., 2012, Hildebrandt et al., 2010). Esta técnica comenzó a utilizarse en el ámbito médico en los años 60, pero debido a los malos resultados como herramienta diagnóstica y la falta de protocolos estandarizados (Head & Elliot, 2002), ésta se dejó de utilizar en detrimento de otras técnicas más precisas a nivel diagnóstico. No obstante, las mejoras tecnológicas de la TI en los últimos años han hecho posible un resurgimiento de la misma (Jiang et al., 2005, Vainer et al., 2005, Cheng et al., 2009, Spalding et al., 2011, Skala et al., 2012), abriendo el camino a nuevas aplicaciones no sólo centradas en el uso diagnóstico. Entre las nuevas aplicaciones, destacamos las que se desarrollan en el ámbito de la actividad física y el deporte, donde recientemente se ha demostrado que los nuevos avances con imágenes de alta resolución pueden proporcionar información muy interesante sobre el complejo sistema de termorregulación humana (Hildebrandt et al., 2010). Entre las nuevas aplicaciones destacan: la cuantificación de la asimilación de la carga de trabajo físico (Čoh & Širok, 2007), la valoración de la condición física (Chudecka et al., 2010, 2012, Akimov et al., 2009, 2011, Merla et al., 2010), la prevención y seguimiento de lesiones (Hildebrandt et al., 2010, 2012, Badža et al., 2012, Gómez Carmona, 2012) e incluso la detección de agujetas (Al-Nakhli et al., 2012). Bajo estas circunstancias, se acusa cada vez más la necesidad de ampliar el conocimiento sobre los factores que influyen en la aplicación de la TI en los seres humanos, así como la descripción de la respuesta de la temperatura de la piel (TP) en condiciones normales, y bajo la influencia de los diferentes tipos de ejercicio. Por consiguiente, este estudio presenta en una primera parte una revisión bibliográfica sobre los factores que afectan al uso de la TI en los seres humanos y una propuesta de clasificación de los mismos. Hemos analizado la fiabilidad del software Termotracker, así como su reproducibilidad de la temperatura de la piel en sujetos jóvenes, sanos y con normopeso. Finalmente, se analizó la respuesta térmica de la piel antes de un entrenamiento de resistencia, velocidad y fuerza, inmediatamente después y durante un período de recuperación de 8 horas. En cuanto a la revisión bibliográfica, hemos propuesto una clasificación para organizar los factores en tres grupos principales: los factores ambientales, individuales y técnicos. El análisis y descripción de estas influencias deben representar la base de nuevas investigaciones con el fin de utilizar la TI en las mejores condiciones. En cuanto a la reproducibilidad, los resultados mostraron valores excelentes para imágenes consecutivas, aunque la reproducibilidad de la TP disminuyó ligeramente con imágenes separadas por 24 horas, sobre todo en las zonas con valores más fríos (es decir, zonas distales y articulaciones). Las asimetrías térmicas (que normalmente se utilizan para seguir la evolución de zonas sobrecargadas o lesionadas) también mostraron excelentes resultados pero, en este caso, con mejores valores para las articulaciones y el zonas centrales (es decir, rodillas, tobillos, dorsales y pectorales) que las Zonas de Interés (ZDI) con valores medios más calientes (como los muslos e isquiotibiales). Los resultados de fiabilidad del software Termotracker fueron excelentes en todas las condiciones y parámetros. En el caso del estudio sobre los efectos de los entrenamientos de la velocidad resistencia y fuerza en la TP, los resultados muestran respuestas específicas según el tipo de entrenamiento, zona de interés, el momento de la evaluación y la función de las zonas analizadas. Los resultados mostraron que la mayoría de las ZDI musculares se mantuvieron significativamente más calientes 8 horas después del entrenamiento, lo que indica que el efecto del ejercicio sobre la TP perdura por lo menos 8 horas en la mayoría de zonas analizadas. La TI podría ser útil para cuantificar la asimilación y recuperación física después de una carga física de trabajo. Estos resultados podrían ser muy útiles para entender mejor el complejo sistema de termorregulación humano, y por lo tanto, para utilizar la TI de una manera más objetiva, precisa y profesional con visos a mejorar las nuevas aplicaciones termográficas en el sector de la actividad física y el deporte Infrared Thermography (IRT) is a safe, non-invasive and low-cost technique that allows the rapid and non-contact recording of the irradiated energy released from the body (Akimov & Son’kin, 2011; Merla et al., 2005; Ng et al., 2009; Costello et al., 2012; Hildebrandt et al., 2010). It has been used since the early 1960’s, but due to poor results as diagnostic tool and a lack of methodological standards and quality assurance (Head et al., 2002), it was rejected from the medical field. Nevertheless, the technological improvements of IRT in the last years have made possible a resurgence of this technique (Jiang et al., 2005; Vainer et al., 2005; Cheng et al., 2009; Spalding et al., 2011; Skala et al., 2012), paving the way to new applications not only focused on the diagnose usages. Among the new applications, we highlighted those in physical activity and sport fields, where it has been recently proven that a high resolution thermal images can provide us with interesting information about the complex thermoregulation system of the body (Hildebrandt et al., 2010), information than can be used as: training workload quantification (Čoh & Širok, 2007), fitness and performance conditions (Chudecka et al., 2010, 2012; Akimov et al., 2009, 2011; Merla et al., 2010; Arfaoui et al., 2012), prevention and monitoring of injuries (Hildebrandt et al., 2010, 2012; Badža et al., 2012, Gómez Carmona, 2012) and even detection of Delayed Onset Muscle Soreness – DOMS- (Al-Nakhli et al., 2012). Under this context, there is a relevant necessity to broaden the knowledge about factors influencing the application of IRT on humans, and to better explore and describe the thermal response of Skin Temperature (Tsk) in normal conditions, and under the influence of different types of exercise. Consequently, this study presents a literature review about factors affecting the application of IRT on human beings and a classification proposal about them. We analysed the reliability of the software Termotracker®, and also its reproducibility of Tsk on young, healthy and normal weight subjects. Finally, we examined the Tsk thermal response before an endurance, speed and strength training, immediately after and during an 8-hour recovery period. Concerning the literature review, we proposed a classification to organise the factors into three main groups: environmental, individual and technical factors. Thus, better exploring and describing these influence factors should represent the basis of further investigations in order to use IRT in the best and optimal conditions to improve its accuracy and results. Regarding the reproducibility results, the outcomes showed excellent values for consecutive images, but the reproducibility of Tsk slightly decreased with time, above all in the colder Regions of Interest (ROI) (i.e. distal and joint areas). The side-to-side differences (ΔT) (normally used to follow the evolution of some injured or overloaded ROI) also showed highly accurate results, but in this case with better values for joints and central ROI (i.e. Knee, Ankles, Dorsal and Pectoral) than the hottest muscle ROI (as Thigh or Hamstrings). The reliability results of the IRT software Termotracker® were excellent in all conditions and parameters. In the part of the study about the effects on Tsk of aerobic, speed and strength training, the results of Tsk demonstrated specific responses depending on the type of training, ROI, moment of the assessment and the function of the considered ROI. The results showed that most of muscular ROI maintained warmer significant Tsk 8 hours after the training, indicating that the effect of exercise on Tsk last at least 8 hours in most of ROI, as well as IRT could help to quantify the recovery status of the athlete as workload assimilation indicator. Those results could be very useful to better understand the complex skin thermoregulation behaviour, and therefore, to use IRT in a more objective, accurate and professional way to improve the new IRT applications for the physical activity and sport sector.

Genomic analyses of flowering transition and inflorescence development in grapevine = Análisis genómicos de la transición floral y del desarrollo de la inflorescencia en la vid

The general objective of this work is to analyze the regulatory processes underlying flowering transition and inflorescence and flower development in grapevine. Most of these crucial developmental events take place within buds growing during two seasons in two consecutive years. During the first season, the shoot apical meristem within the bud differentiates all the basic elements of the shoot including flowering transition in lateral primordia and development of inflorescence primordia. These events practically end with bud dormancy. The second season, buds resume shoot growth associated to flower formation and development. In grapevine, the lateral meristems can give rise either to tendril or inflorescence primordia that are homologous organs. With this purpose, we performed global transcriptome analyses along the bud annual cycle and during inflorescence and tendril development. In addition, we approach the genomic analysis of the MIKC type MADS-box gene family in grapevine to identify all its members and assign them putative biological functions. Regarding buds developmental cycle, the results indicate that the main factors explaining the global gene expression differences were the processes of bud dormancy and active growth as well as stress responses. Non dormant buds exhibited up-regulation in functional categories typical of actively proliferating and growing cells (photosynthesis, cell cycle regulation, chromatin assembly) whereas in dormant ones the main functional categories up-regulated were associated to stress response pathways together with transcripts related to starch catabolism. Major transcriptional changes during the dormancy period were associated to the para/endodormancy, endo/ecodormancy and ecodormancy/bud break transitions. Global transcriptional analyses along tendril and inflorescence development suggested that these two homologous organs share a common transcriptional program related to cell proliferation functions. Both structures showed a progressive decrease in the expression of categories such as cell-cycle, auxin metabolism/signaling, DNA metabolism, chromatin assembly and a cluster of five transcripts belonging to the GROWTH-REGULATING FACTOR (GRF) transcription factor family, that are known to control cell proliferation in other species and determine the size of lateral organs. However, they also showed organ specific transcriptional programs that can be related to their differential organ structure and function. Tendrils showed higher transcription of genes related to photosynthesis, hormone signaling and secondary metabolism than inflorescences, while inflorescences have higher transcriptional activity for genes encoding transcription factors (especially those belonging to the MADS-box gene family). Further analysis along inflorescence development evidenced the relevance of additional functions likely related to processes of flower development such as fatty acid and lipid metabolism, jasmonate signaling and oxylipin biosynthesis. The transcriptional analyses performed highlighted the relevance of several groups of transcriptional regulators in the developmental processes studied. The expression profiles along bud development revealed significant differences for some MADS-box subfamilies in relation to other plant species, like the members of the FLC and SVP subfamilies suggesting new roles for these groups in grapevine. In this way, it was found that VvFLC2 and VvAGL15.1 could participate, together with some members of the SPL-L family, in dormancy regulation, as was shown for some of them in other woody plants. Similarly, the expression patterns of the VvFLC1, VvFUL, VvSOC1.1 (together with VvFT, VvMFT1 and VFL) genes could indicate that they play a role in flowering transition in grapevine, in parallel to their roles in other plant systems. The expression levels of VFL, the grapevine LEAFY homolog, could be crucial to specify the development of inflorescence and flower meristems instead of tendril meristems. MADS-box genes VvAP3.1 and 2, VvPI, VvAG1 and 3, VvSEP1-4, as well as VvBS1 and 2 are likely associated with the events of flower meristems and flower organs differentiation, while VvAP1 and VvFUL-L (together with VvSOC1.1, VvAGL6.2) could be involved on tendril development given their expression patterns. In addition, the biological function ofVvAP1 and VvTFL1A was analyzed using a gene silencing approach in transgenic grapevine plants. Our preliminary results suggested a possible role for both genes in the initiation and differentiation of tendrils. Finally, the genomic analysis of the MADS-box gene family in grapevine revealed differential features regarding number and expression pattern of genes putatively involved in the flowering transition process as compared to those involved in the specification of flower and fruit organ identity. Altogether, the results obtained allow identifying putative candidate genes and pathways regulating grapevine reproductive developmental processes paving the way to future experiments demonstrating specific gene biological functions. RESUMEN El objetivo general de este trabajo es analizar los procesos regulatorios subyacentes a la inducción floral así como al desarrollo de la inflorescencia y la flor en la vid. La mayor parte de estos eventos cruciales tienen lugar en las yemas a lo largo de dos estaciones de crecimiento consecutivas. Durante la primera estación, el meristemo apical contenido en la yema diferencia los elementos básicos del pámpano, lo cual incluye la inducción de la floración en los meristemos laterales y el subsiguiente desarrollo de primordios de inflorescencia. Estos procesos prácticamente cesan con la entrada en dormición de la yema. En la segunda estación, se reanuda el crecimiento del pámpano acompañado por la formación y desarrollo de las flores. En la vid, los meristemos laterales pueden dar lugar a primordios de inflorescencia o de zarcillo que son considerados órganos homólogos. Con este objetivo llevamos a cabo un estudio a nivel del transcriptoma de la yema a lo largo de su ciclo anual, así como a lo largo del desarrollo de la inflorescencia y del zarcillo. Además realizamos un análisis genómico de la familia MADS de factores transcripcionales (concretamente aquellos del tipo MIKC) para identificar todos sus miembros y tratar de asignarles posibles funciones biológicas. En cuanto al ciclo de desarrollo de la yema, los resultados indican que los principales factores que explican las diferencias globales en la expresión génica fueron los procesos de dormición de la yema y el crecimiento activo junto con las respuestas a diversos tipos de estrés. Las yemas no durmientes mostraron un incremento en la expresión de genes contenidos en categorías funcionales típicas de células en proliferación y crecimiento activo (como fotosíntesis, regulación del ciclo celular, ensamblaje de cromatina), mientras que en las yemas durmientes, las principales categorías funcionales activadas estaban asociadas a respuestas a estrés, así como con el catabolismo de almidón. Los mayores cambios observados a nivel de transcriptoma en la yema coincidieron con las transiciones de para/endodormición, endo/ecodormición y ecodormición/brotación. Los análisis transcripcionales globales a lo largo del desarrollo del zarcillo y de la inflorescencia sugirieron que estos dos órganos homólogos comparten un programa transcripcional común, relacionado con funciones de proliferación celular. Ambas estructuras mostraron un descenso progresivo en la expresión de genes pertenecientes a categorías funcionales como regulación del ciclo celular, metabolismo/señalización por auxinas, metabolismo de ADN, ensamblaje de cromatina y un grupo de cinco tránscritos pertenecientes a la familia de factores transcripcionales GROWTH-REGULATING FACTOR (GRF), que han sido asociados con el control de la proliferación celular y en determinar el tamaño de los órganos laterales en otras especies. Sin embargo, también pusieron de manifiesto programas transcripcionales que podrían estar relacionados con la diferente estructura y función de dichos órganos. Los zarcillos mostraron mayor actividad transcripcional de genes relacionados con fotosíntesis, señalización hormonal y metabolismo secundario que las inflorescencias, mientras que éstas presentaron mayor actividad transcripcional de genes codificantes de factores de transcripción (especialmente los pertenecientes a la familia MADS-box). Análisis adicionales a lo largo del desarrollo de la inflorescencia evidenciaron la relevancia de otras funciones posiblemente relacionadas con el desarrollo floral, como el metabolismo de lípidos y ácidos grasos, la señalización mediada por jasmonato y la biosíntesis de oxilipinas. Los análisis transcripcionales llevados a cabo pusieron de manifiesto la relevancia de varios grupos de factores transcripcionales en los procesos estudiados. Los perfiles de expresión estudiados a lo largo del desarrollo de la yema mostraron diferencias significativas en algunas de las subfamilias de genes MADS con respecto a otras especies vegetales, como las observadas en los miembros de las subfamilias FLC y SVP, lo cual sugiere que podrían desempeñar nuevas funciones en la vid. En este sentido, se encontró que los genes VvFLC2 y VvAGL15.1 podrían participar, junto con algunos miembros de la familia SPL-L, en la regulación de la dormición. De un modo similar, los patrones de expresión de los genes VvFLC1, VvFUL, VvSOC1.1 (junto con VvFT, VvMFT1 y VFL) podría indicar que desempeñan un papel en la regulación de la inducción de la floración en la vid, como se ha observado en otros sistemas vegetales. Los niveles de expresión de VFL, el homólogo en vid del gen LEAFY de A. thaliana podrían ser cruciales para la especificación del desarrollo de meristemos de inflorescencia y flor en lugar de meristemos de zarcillo. Los genes VvAP3.1 y 2, VvPI, VvAG1 y 3, VvSEP1-4, así como VvBS1 y 2 parecen estar asociados con los eventos de diferenciación de meristemos y órganos florales, mientras que VvAP1 y VvFUL-L (junto con VvSOC1.1 y VvAGL6.2) podrían estar implicados en el desarrollo del zarcillo dados sus patrones de expresión. Adicionalmente, se analizó la función biológica de los genes VvAP1 y VvTFL1A por medio de una estrategia de silenciamiento génico. Los datos preliminares sugieren un posible papel para ambos genes en la iniciación y diferenciación de los zarcillos. Finalmente, el análisis genómico de la familia MADS en vid evidenció diferencias con respecto a otras especies vegetales en cuanto a número de miembros y patrón de expresión en genes supuestamente implicados en la inducción de la floración, en comparación con aquellos relacionados con la especificación de identidad de órganos florales y desarrollo del fruto. En conjunto, los resultados obtenidos han permitido identificar posibles rutas y genes candidatos a participar en la regulación de los procesos de desarrollo reproductivo de la vid, sentando las bases de futuros experimentos encaminados a conocer la funciones biológicas de genes específicos.

Optimal fits of diffusion constants from single-time data points of Brownian trajectories

Experimental methods based on single particle tracking (SPT) are being increasingly employed in the physical and biological sciences, where nanoscale objects are visualized with high temporal and spatial resolution. SPT can probe interactions between a particle and its environment but the price to be paid is the absence of ensemble averaging and a consequent lack of statistics. Here we address the benchmark question of how to accurately extract the diffusion constant of one single Brownian trajectory. We analyze a class of estimators based on weighted functionals of the square displacement. For a certain choice of the weight function these functionals provide the true ensemble averaged diffusion coefficient, with a precision that increases with the trajectory resolution.

Goal-oriented self-adaptive hp-strategies for finite element analysis of electromagnetic scattering and radiation problems

In this paper, a fully automatic goal-oriented hp-adaptive finite element strategy for open region electromagnetic problems (radiation and scattering) is presented. The methodology leads to exponential rates of convergence in terms of an upper bound of an user-prescribed quantity of interest. Thus, the adaptivity may be guided to provide an optimal error, not globally for the field in the whole finite element domain, but for specific parameters of engineering interest. For instance, the error on the numerical computation of the S-parameters of an antenna array, the field radiated by an antenna, or the Radar Cross Section on given directions, can be minimized. The efficiency of the approach is illustrated with several numerical simulations with two dimensional problem domains. Results include the comparison with the previously developed energy-norm based hp-adaptivity.

High-efficiency voltage regulator and stabilizer for outdoor lighting installations

This paper presents a high performance system of regulation and stabilization of luminous flux for public street lighting installations. Its purpose is to reduce the luminous flux of the luminaries efficiently by reducing their voltage supply, resulting in the improvement of energy efficiency in the installation. The system is basically composed of electromagnetic components which provide robustness and high-performance to the device, as well as minimum maintenance requirements. However, the voltage regulation is based on the application of voltage steps. Aging studies of the luminaries have been carried out to analyze the impact of this discrete voltage regulation. A specific prototype of this voltage and stabilizer regulator have been in operation in a real outdoor lighting installation for more than one year.

Design of a solar incubator. Part 1: Monitoring temperature and enthalpy gradients under commercial production

The real increase in energy prices and the intention of reducing pollutant emissions in developed countries makes interesting to use solar energy in all the processes where its application is possible. As it is demonstrated in countries sited at latitudes with optimal conditions of solar radiation and temperature, it is possible to use solar energy as heat source for small-scale hatchery [1,2], but beyond, making a design for proper installation; it is possible to use solar energy as main or support energy source in medium and large size incubators . Monitoring of a normal actual process using temperature and relative humidity sensors is necessary to know the actual operating conditions that the solar heating system must be designed and sized for. Moreover, the identification and analysis of temperature and enthalpy gradients inside the incubator is of major importance.

Testing a GIS-based methodology for optimal location of Pumped Storage power plants in Norway

Europe needs to restructure its energy system. The aim to decrease the reliance on fossil fuels to a higher dependence on renewable energy has now been imposed by The European Commission. In order to achieve this goal there is a great interest in Norway to become "The Green Battery of Europe". In the pursuit of this goal a GIS-tool was created to investigate the pump storage potential in Norway. The tool searches for possible connections between existing reservoirs and dams with the criteria selected by the user. The aim of this thesis was to test the tool and see if the results suggested were plausible, develop a cost calculation method for the PSH lines, and make suggestions for further development of the tool. During the process the tool presented many non-feasible pumped storage hydropower (PSH) connections. The area of Telemark was chosen for the more detailed study. The results were discussed and some improvements were suggested for further development of the tool. Also a sensitivity test was done to see which of the parameters set by the user are the most relevant for the PSH connection suggestion. From a range of the most promising PSH plants suggested by the tool, the one between Songavatn and Totak was chosen for a case study, where there already exists a power plant between both reservoirs. A new Pumped Storage Plant was designed with a power production of 1200 MW. There are still many topics open to discussion, such as how to deal with environmental restrictions, or how to deal with inflows and outflows of the reservoirs from the existing power plants. Consequently the GIS-tool can be a very useful tool to establish the best possible connections between existing reservoirs and dams, but it still needs a deep study and the creation of new parameters for the user.

Integration of congestion pricing and intertemporal preference rate in social welfare function

Assessing social benefits in transport policy implementation has been studied by many researchers using theoretical or empirical measures. However, few of them measure social benefit using different discount rates including the inter-temporal preferences rate of users, the private investment discount rate and the inter-temporal preferences rate of the government. In general, the social discount rate used is the same for all social actors. Therefore, this paper aims to assess a new method by integrating different types of discount rate belonging to different social actors in order to measure the real benefits of each actor in the short, medium and long term. A dynamic simulation is provided by a strategic Land-Use and Transport Interaction (LUTI) model. The method is tested by optimizing a cordon toll scheme in Madrid considering socio- economic efficiency and environmental criteria. Based on the modified social welfare function (WF), the effects on the measure of social benefits are estimated and compared with the classical WF results as well. The results of this research could be a key issue to understanding the relationship between transport system policies and social actors' benefits distribution in a metropolitan context. The results show that the use of more suitable discount rates for each social actor had an effect on the selection and definition of optimal strategy of congestion pricing. The usefulness of the measure of congestion toll declines more quickly overtime.

Effects of internal luminescence and internal optics on V-oc and J(sc) of III-V solar cells

For solar cells dominated by radiative recombination, the performance can be significantly enhanced by improving the internal optics. Internally radiated photons can be directly emitted from the cell, but if confined by good internal reflectors at the front and back of the cell they can also be re-absorbed with a significant probability. This so-called photon recycling leads to an increase in the equilibrium minority carrier concentration and therefore the open-circuit voltage, Voc. In multijunction cells, the internal luminescence from a particular junction can also be coupled into a lower bandgap junction where it generates photocurrent in addition to the externally generated photocurrent, and affects the overall performance of the tandem. We demonstrate and discuss the implications of a detailed model that we have developed for real, non-idealized solar cells that calculates the external luminescent efficiency, accounting for wavelength-dependent optical properties in each layer, parasitic optical and electrical losses, multiple reflections within the cell and isotropic internal emission. The calculation leads to Voc, and we show data on high quality GaAs cells that agree with the trends in the model as the optics are systematically varied. For multijunction cells the calculation also leads to the luminescent coupling efficiency, and we show data on GaInP/GaAs tandems where the trends also agree as the coupling is systematically varied. In both cases, the effects of the optics are most prominent in cells with good material quality. The model is applicable to any solar cell for which the optical properties of each layer are well-characterized, and can be used to explore a wide phase space of design for single junction and multijunction solar cells.

Integration of congestion pricing and intertemporal preferences rate integration in social welfare function

Many researchers have used theoretical or empirical measures to assess social benefits in transport policy implementation. However, few have measured social benefits by using discount rates, including the intertemporal preference rate of users, the private investment discount rate, and the intertemporal preference rate of the government. In general, the social discount rate used is the same for all social actors. This paper aims to assess a new method by integrating different types of discount rates belonging to different social actors to measure the real benefits of each actor in the short term, medium term, and long term. A dynamic simulation is provided by a strategic land use and transport interaction model. The method was tested by optimizing a cordon toll scheme in Madrid, Spain. Socioeconomic efficiency and environmental criteria were considered. On the basis of the modified social welfare function, the effects on the measure of social benefits were estimated and compared with the classical welfare function measures. The results show that the use of more suitable discount rates for each social actor had an effect on the selection and definition of optimal strategy of congestion pricing. The usefulness of the measure of congestion toll declines more quickly over time. This result could be the key to understanding the relationship between transport system policies and the distribution of social actors? benefits in a metropolitan context.

Characterization of tomato Cycling Dof Factors reveals conserved and new functions in the control of flowering time and abiotic stress responses.

DNA binding with One Finger (DOF) transcription factors are involved in multiple aspects of plant growth and development but their precise roles in abiotic stress tolerance are largely unknown. Here we report a group of five tomato DOF genes, homologous to Arabidopsis Cycling DOF Factors (CDFs), that function as transcriptional regulators involved in responses to drought and salt stress and flowering-time control in a gene-specific manner. SlCDF1?5 are nuclear proteins that display specific binding with different affinities to canonical DNA target sequences and present diverse transcriptional activation capacities in vivo. SlCDF1?5 genes exhibited distinct diurnal expression patterns and were differentially induced in response to osmotic, salt, heat, and low-temperature stresses. Arabidopsis plants overexpressing SlCDF1 or SlCDF3 showed increased drought and salt tolerance. In addition, the expression of various stress-responsive genes, such as COR15, RD29A, and RD10, were differentially activated in the overexpressing lines. Interestingly, overexpression in Arabidopsis of SlCDF3 but not SlCDF1 promotes late flowering through modulation of the expression of flowering control genes such as CO and FT. Overall, our data connect SlCDFs to undescribed functions related to abiotic stress tolerance and flowering time through the regulation of specific target genes and an increase in particular metabolites

A contribution to the optimal numbering of tree structures

This paper develops an automatic procedure for the optimal numbering of members and nodes in tree structures. With it the stiffness matrix is optimally conditioned either if a direct solution algorithm or a frontal one is used to solve the system of equations. In spite of its effectiveness, the procedure is strikingly simple and so is the computer program shown below.

Towards an Optimal Implementation of Cascade

Cascade is an information reconciliation protocol proposed in the context of secret key agreement in quantum cryptography. This protocol allows removing discrepancies in two partially correlated sequences that belong to distant parties, connected through a public noiseless channel. It is highly interactive, thus requiring a large number of channel communications between the parties to proceed and, although its efficiency is not optimal, it has become the de-facto standard for practical implementations of information reconciliation in quantum key distribution. The aim of this work is to analyze the performance of Cascade, to discuss its strengths, weaknesses and optimization possibilities, comparing with some of the modified versions that have been proposed in the literature. When looking at all design trade-offs, a new view emerges that allows to put forward a number of guidelines and propose near optimal parameters for the practical implementation of Cascade improving performance significantly in comparison with all previous proposals.