Smart Spaces and Smart Objects interoperability Architecture (S3OiA)

The presented work aims to contribute towards the standardization and the interoperability off the Future Internet through an open and scalable architecture design. We present S³OiA as a syntactic/semantic Service-Oriented Architecture that allows the integration of any type of object or device, not mattering their nature, on the Internet of Things. Moreover, the architecture makes possible the use of underlying heterogeneous resources as a substrate for the automatic composition of complex applications through a semantic Triple Space paradigm. Created applications are dynamic and adaptive since they are able to evolve depending on the context where they are executed. The validation scenario of this architecture encompasses areas which are prone to involve human beings in order to promote personal autonomy, such as home-care automation environments and Ambient Assisted Living.

Designing and simulating smart grids

Growing energy demands and the increased use of renewal energies have changed the landscape of power networks leading to new challenges. Smart Grids have emerged to cope with these challenges by facilitating the integration of traditional and renewable energy resources in distributed, open, and self-managed ways. Innovative models are needed to design energy infrastructures that can enable self-management of the power grid. Software architectures smoothly integrate the software that provides self-management to Smart Grids and their hardware infrastructures. We present a framework to design the software architectures of autonomous Smart Grids in an intuitive domain-oriented way and to simulate their execution by automatically generating the code from the designed autonomous smart grid architectures.

Agent-based modeling and simulation for the design of the future european Air Traffic Management system: the experience of CASSIOPEIA

The SESAR (Single European Sky ATM Research) program is an ambitious re-search and development initiative to design the future European air traffic man-agement (ATM) system. The study of the behavior of ATM systems using agent-based modeling and simulation tools can help the development of new methods to improve their performance. This paper presents an overview of existing agent-based approaches in air transportation (paying special attention to the challenges that exist for the design of future ATM systems) and, subsequently, describes a new agent-based approach that we proposed in the CASSIOPEIA project, which was developed according to the goals of the SESAR program. In our approach, we use agent models for different ATM stakeholders, and, in contrast to previous work, our solution models new collaborative decision processes for flow traffic management, it uses an intermediate level of abstraction (useful for simulations at larger scales), and was designed to be a practical tool (open and reusable) for the development of different ATM studies. It was successfully applied in three stud-ies related to the design of future ATM systems in Europe.

Diseño acústico y electroacústico de Waipahu Transit Center en Honolulú, Hawái

El objetivo de este Proyecto Fin de Grado es el diseño de megafonía y PAGA (Public Address /General Alarm) de la estación de tren Waipahu Transit Center en la ciudad de Honolulú, Hawái. Esta estación forma parte de una nueva línea de tren que está en proceso de construcción actualmente llamada Honolulu Rail Transit. Inicialmente la línea de tren constará de 21 estaciones, en las que prácticamente todas están diseñadas como pasos elevados usando como referencia las autopistas que cruzan la isla. Se tiene prevista su fecha de finalización en el año 2019, aunque las primeras estaciones se inaugurarán en 2017. Se trata en primer lugar un estudio acústico del recinto a sonorizar, eligiendo los equipos necesarios: conmutadores, altavoces, amplificadores, procesador, equipo de control y micrófonos. Este primer estudio sirve para obtener una aproximación de equipos necesarios, así como la posible situación de estos dentro de la estación. Tras esto, se procede a la simulación de la estación mediante el programa de simulación acústica y electroacústica EASE 4.4. Para ello, se diseña la estación en un modelo 3D, en el que cada superficie se asocia a su material correspondiente. Para facilitar el diseño y el cómputo de las simulaciones se divide la estación en 3 partes por separado. Cada una corresponde a un nivel de la estación: Ground level, el nivel inferior que contiene la entrada; Concourse Level, pasillo que comunica los dos andenes; y Platform Level, en el que realizarán las paradas los trenes. Una vez realizado el diseño se procede al posicionamiento de altavoces en los diferentes niveles de la estación. Debido al clima existente en la isla, el cual ronda los 20°C a lo largo de todo el año, no es necesaria la instalación de sistemas de aire acondicionado o calefacción, por lo que la estación no está totalmente cerrada. Esto supone un problema al realizar las simulaciones en EASE, ya que al tratarse de un recinto abierto se deberán hallar parámetros como el tiempo de reverberación o el volumen equivalente por otros medios. Para ello, se utilizará el método Ray Tracing, mediante el cual se halla el tiempo de reverberación por la respuesta al impulso de la sala; y a continuación se calcula un volumen equivalente del recinto mediante la fórmula de Eyring. Con estos datos, se puede proceder a calcular los parámetros necesarios: nivel de presión sonora directo, nivel de presión sonora total y STI (Speech Transmission Index). Para obtener este último será necesario ecualizar antes en cada uno de los niveles de la estación. Una vez hechas las simulaciones, se comprueba que el nivel de presión sonora y los valores de inteligibilidad son acordes con los requisitos dados por el cliente. Tras esto, se procede a realizar los bucles de altavoces y el cálculo de amplificadores necesarios. Se estudia la situación de los micrófonos, que servirán para poder variar la potencia emitida por los altavoces dependiendo del nivel de ruido en la estación. Una vez obtenidos todos los equipos necesarios en la estación, se hace el conexionado entre éstos, tanto de una forma simplificada en la que se pueden ver los bucles de altavoces en cada nivel de la estación, como de una forma más detallada en la que se muestran las conexiones entre cada equipo del rack. Finalmente, se realiza el etiquetado de los equipos y un presupuesto estimado con los costes del diseño del sistema PAGA. ABSTRACT. The aim of this Final Degree Project is the design of the PAGA (Public Address / General Alarm) system in the train station Waipahu Transit Center in the city of Honolulu, Hawaii. This station is part of a new rail line that is currently under construction, called Honolulu Rail Transit. Initially, the rail line will have 21 stations, in which almost all are designed elevated using the highways that cross the island as reference. At first, it is treated an acoustic study in the areas to cover, choosing the equipment needed: switches, loudspeakers, amplifiers, DPS, control station and microphones. This first study helps to obtain an approximation of the equipments needed, as well as their placement inside the station. Thereafter, it is proceeded to do the simulation of the station through the acoustics and electroacoustics simulation software EASE 4.4. In order to do that, it is made the 3D design of the station, in which each surface is associated with its material. In order to ease the design and calculation of the simulations, the station has been divided in 3 zones. Each one corresponds with one level of the station: Ground Level, the lower level that has the entrance; Concourse Level, a corridor that links the two platforms; and Platform Level, where the trains will stop. Once the design is made, it is proceeded to place the speakers in the different levels of the station. Due to the weather in the island, which is about 20°C throughout the year, it is not necessary the installation of air conditioning or heating systems, so the station is not totally closed. This cause a problem when making the simulations in EASE, as the project is open, and it will be necessary to calculate parameters like the reverberation time or the equivalent volume by other methods. In order to do that, it will be used the Ray Tracing method, by which the reverberation time is calculated by the impulse response; and then it is calculated the equivalent volume of the area with the Eyring equation. With this information, it can be proceeded to calculate the parameters needed: direct sound pressure level, total sound pressure level and STI (Speech Transmission Index). In order to obtain the STI, it will be needed to equalize before in each of the station’s levels. Once the simulations are done, it is checked that the sound pressure level and the intelligibility values agree with the requirements given by the client. After that, it is proceeded to perform the speaker’s loops and the calculation of the amplifiers needed. It is studied the placement of the microphones, which will help to vary the power emitted by the speakers depending on the background noise level in the station. Once obtained all the necessary equipment in the station, it is done the connection diagram, both a simplified diagram in which there can be seen the speaker’s loops in each level of the station, or a more detailed diagram in which it is shown the wiring between each equipment of the rack. At last, it is done the labeling of the equipments and an estimated budget with the expenses for the PAGA design.

Le Corbusier y el proyecto para Saint Marie de la Tourette: De la celda al espacio inefable

El convento de la Tourette se concibe en un marco temporal concreto. Sin embargo sería erróneo limitarse a él a la hora de intentar desentrañar las claves del proyecto y llegar a un entendimiento completo del mismo. Es necesario analizarlo atendiendo al conjunto global de la producción del arquitecto, la cual ha ido forjando una forma propia de hacer que condicionará en gran medida las decisiones tomadas en cada momento. Esta tesis realiza una investigación de doble sentido (recogida en los dos volúmenes que la componen). Por un lado analiza el proceso evolutivo en el que se enhebra la obra intentando desentrañar la influencia de aquel en ésta, pero por otro, invirtiendo el sentido, también desvela ciertas claves de la arquitectura de Le Corbusier a través del preciso análisis de proyecto de la Tourette. Pero aún más, la pertenencia del convento de la Tourette al “tipo monacal” introduce la presencia de un tiempo histórico “ab origine, in hillo tempore” del que la investigación se hace eco. Un tiempo al que Le Corbusier siempre volverá la mirada, y que en este caso se encuentra muy presente, determinando el devenir del proyecto de una forma particular y definitiva. Por tanto este trabajo pretende convocar los dos tiempos que conviven en el proyecto del convento de la Tourette, el corto, concreto y cerrado de su génesis y desarrollo, que se circunscribe al periodo de proyecto comprendido entre los años 1953 y 1956, y el más dilatado, abstracto y abierto, que enlaza el proyecto con la producción de Le Corbusier, y aún más atrás, con el tiempo histórico. En la primera parte del trabajo (A. “PROYECTO”) se realiza un análisis cronológico de la documentación gráfica ‐incluyendo su re‐dibujo‐ y escrita del proyecto, desde los croquis que el arquitecto esboza en su primera visita al valle del Turdine hasta el documento final del project d’exécution, a partir del cual se materializará la obra. El objetivo de la investigación no es describir la realidad construida, sino participar del secreto de su génesis analizando y intentando comprender los dibujos o el pensamiento de sus creadores. Frente a la multitud de escritos sobre la obra del convento de la Tourette el foco de atención de la tesis se centra en el proyecto. Es en esta fase de elaboración y desarrollo de las ideas, previa a la acción de construir, donde pensamos que La deriva de la propia actividad del arquitecto avala esta decisión. A lo largo de su carrera Le Corbusier va reduciendo progresivamente su presencia en la obra centrándose cada vez más en las fases de la concepción y proyecto arquitectónico. Considera que en ellas se produce lo “esencial” mientras que deja las decisiones de obra en manos de sus colaboradores y de los diversos “operadores”, participando tan solo en el visto bueno final de las mismas (esta posición contrasta con la entrega de los constructores para quienes el arquitecto encarna la innovación tecnológica). En la Tourette realiza exclusivamente tres visitas de obra en las que actúa como un mero escenógrafo, ajustando aquí y allá pequeñas decisiones de la construcción. Esta distancia refuerza su posición en el proceso y subraya su búsqueda de un ideal teórico desarrollado sobre todo en la fase de proyecto frente a lo subsidiario de la realidad práctica. En la segunda parte de la tesis, denominada “RE‐VISIONES”, se abre el campo de acción a otras facetas de la ingente actividad de Le Corbusier como la pintura, la escritura o incluso la escultura; una nueva MIRADA bajo el prisma de una serie de conceptos‐llave recurrentes en su Petit vocabulaire (l’homme, la céllule, la bôite, l’organisme). Se amplía, por tanto, el marco temporal, repasando de modo genérico y transversal la evolución de los mismos en la trayectoria del arquitecto, comprobándose como el convento de la Tourette es un eslabón característico y clave en todos ellos. ABSTRACT The Convent of La Tourette is conceived in a specific time frame. However, it would be erroneous to limit oneself simply to this when trying to unravel the keys to the project and to fully understand it. It is necessary to analyse the project attending to the entire production of the architect, who progressively shaped his own way of doing things which would condition to a large extent the decisions taken at each point in time. This thesis carries out its research in a dual sense (brought together in both its volumes). On the one hand, it analyses the development process threading the work attempting to fathom the influence of the former on the latter but, on the other hand, inverting the sense which also reveals certain keys to the architecture of Le Corbusier by means of a detailed analysis of the project for La Tourette. Even more so, the Convent of La Tourette belonging to the “monastic type” introduces the presence of a historical period “ab origine, in hillo tempore" reflected in the research. A period to which Le Corbusier would always look back on and which is extremely present in this case, determining the evolution of the project in a particular and definitive manner. Therefore, this piece of work attempts to bring together both time periods co‐existing in the project for the Convent of La Tourette, the short, specific and closed one regarding its genesis development, encompassing the project period going from 1953 to 1956, and the broader, more abstract and open one linking the project with the production by Le Corbusier, and even further back, with the historical period. The first part of this work (A. “PROJECT") performs a chronological analysis of the graphic – including its re‐drawing –and written documentation of the project, from the outlines the architect sketched in his first visit to the Turdine valley up to the final document of the project d’exécution from which the works would materialise. The main object of the investigation is not intend to describe the reality constructed, but to participate in the secret of its genesis, analysing and trying to understand the drawings or the thoughts of its creators. As opposed to the many writings on the work of the Convent of La Tourette, the attention of this thesis focusses on the project. It is in this preparation and development stage, previous to the construction action, where it is believed the real keys to understand and explain it lie. The enormous work collecting, ordering and analysing the abundant graphic and written information reveals “a multidirectional process, full of regrets and securities, errors and certainties, leaps backwards and tremendous foresight in the process” directed not only by the conditions of the assignment, but also by the way of doing things of Le Corbusier and his collaborator I. Xenakis. A web of hidden relationships is weaved in this open space of the process, often distant in time, allowing us to draw a new route, not only towards the constructed works of the Convent of La Tourette, but towards understanding his entire production. It is in the creation of this new path of knowledge, and not only in its conclusion, where the “thesis” acquires its true meaning. In second place, the drift in the actual activity of the architect backs this decision. Throughout his career, Le Corbusier progressively reduced his presence on site, focussing more and more on the conception and architectural project stages. He considered that which was “essential” took place in these, while leaving the on‐site decisions to his collaborators and the different “operators”, only participating in their final approval (this position is in contrast with the delivery by the constructors for whom the architect embodies the technological innovation). In La Tourette he exclusively made three on‐site visits, in which acted as a pure stage designer, adjusting small construction decisions here and there. This distance reinforces his position in the process and underlines his search for a theoretical ideal developed primarily in the project stage as opposed to that which is secondary of the practical reality. The second part of the thesis, called “RE‐VISIONS”, widens the scope of action to other aspects of the huge activity by Le Corbusier, encompassing painting, writing or even sculpture; a new VIEW under the prism of a series of recurrent key concepts in his Petit vocabulaire (l’homme, la céllule, la bôite, l’organisme). The time frame is therefore extended, revising in a generic and transversal manner the development of these concepts throughout the career of Le Corbusier, confirming how the Convent of La Tourette is a characteristic and key link to each of them.

Effects of radiation losses on very lean methane/air flames propagating upward in a vertical tube

The stationary upward propagation of a very lean methane/air flame in a long vertical tube open at the bottom and closed at the top is simulated numerically using a single overall chemical reaction to model combustion and assuming an optically thin gas and a transparent or non-reflecting tube wall to approximately account for radiation losses from CO2CO2 and H2OH2O. Buoyancy plays a dominant role in the propagation of these flames and causes a large region of low velocity of the burnt gas relative to the flame to appear below the flame front when the equivalence ratio is decreased. The size of this region scales with the radius of the tube, and its presence enhances the effect of radiation losses, which would be otherwise negligible for a standard flammability tube, given the small concentration of radiating species. Heat conduction is found to be important in the low velocity region and to lead to a conduction flux from the flame to the burnt gas that causes extinction at the flame tip for a value of the equivalence ratio near the flammability limit experimentally measured in the standard tube. The effect of radiation losses decreases with the radius of the tube. Numerical results and order-of-magnitude estimates show that, in the absence of radiation, a very lean flame front fails to propagate only after recirculation of the burnt gas extends to its reaction region and drastically changes its structure. This condition is not realized for the standard flammability tube, but it seems to account for the flammability limit measured in a tube of about half the radius of the standard tube.

Aerodynamic loads on bluff bodies under wind gusts

Esta tesis doctoral se ha centrado en el estudio de las cargas aerodinámicas no estacionario en romos cuerpos o no aerodinámicos (bluff bodies). Con este objetivo se han identificado y analizado los siguientes puntos: -Caracterización del flujo medido con diferentes tipos de tubos de Pitot y anemómetro de hilo caliente en condiciones de flujo no estacionario inestable generado por un túnel aerodinamico de ráfagas. -Diseño e integración de los montajes experimentales requeridos para medir las cargas de viento internas y externas que actúan sobre los cuerpos romos en condiciones de flujo de viento con ráfagas. -Implementación de modelos matemáticos semi-empíricos basados en flujo potencial y las teorías fenomenológicas pertinentes para simular los resultados experimentales. -En diversan condiciones de flujo con ráfagas, la identificación y el análisis de la influencia de los parámetros obtenida a partir de los modelos teóricos desarrollados. -Se proponen estimaciones empíricas para averiguar los valores adecuados de los parámetros que influyente, mediante el ajuste de los resultados experimentales y los predichos teóricamente. Los montajes experimentales se has reakizado en un tunel aerodinamico de circuito abierto, provisto de baja velocidad, cámara de ensayes cerrada, un nuevo concepto de mecanismo generador de ráfaga sinusoidal, diseñado y construido en el Instituto de Microgravedad "Ignacio Da Riva" de la Universidad Politécnica de Madrid, (IDR / UPM). La principal característica de este túnel aerodynamico es la capacidad de generar un flujo con un perfil de velocidad uniforme y una fluctuación sinusoidal en el tiempo. Se han realizado pruebas experimentales para estudiar el efecto de los flujos no estacionarios en cuerpos romos situados en el suelo. Se han propuesto dos modelos teóricos para diterminar las cargas de presión externas e internas respectivamente. Con el fin de satisfacer la necesidad de la crea ráfagas de viento sinusoidales para comprobar las predicciones de los modelos teóricos, se han obtenido velocidades de hasta 30 m/s y frecuencias ráfaga de hasta 10 Hz. La sección de la cámara de ensayos es de 0,39 m x 0,54 m, dimensiónes adecuadas para llevar a cabo experimentos con modelos de ensayos. Se muestra que en la gama de parámetros explorados los resultados experimentales están en buen acuerdo con las predicciones de los modelos teóricos. Se han realizado pruebas experimentales para estudiar los efectos del flujo no estacionario, las cuales pueden ayudar a aclarar el fenómeno de las cargas de presión externa sobre los cuerpos romos sometidos a ráfagas de viento: y tambien para determinan las cargas de presión interna, que dependen del tamaño de los orificios de ventilación de la construcción. Por último, se ha analizado la contribución de los términos provenientes del flujo no estacionario, y se han caracterizado o los saltos de presión debido a la pérdida no estacionario de presión a través de los orificios de ventilación. ABSTRACT This Doctoral dissertation has been focused to study the unsteady aerodynamic loads on bluff bodies. To this aim the following points have been identified and analyzed: -Characterization of the flow measured with different types of Pitot tubes and hot wire anemometer at unsteady flow conditions generated by a gust wind tunnel. -Design and integrating of the experimental setups required to measure the internal and external wind loads acting on bluff bodies at gusty wind flow conditions. -Implementation of semi-empirical mathematical models based on potential flow and relevant phenomenological theories to simulate the experimental results.-At various gusty flow conditions, extracting and analyzing the influence of parameters obtained from the developed theoretical models. -Empirical estimations are proposed to find out suitable values of the influencing parameters, by fitting the experimental and theoretically predicted results. The experimental setups are performed in an open circuit, closed test section, low speed wind tunnel, with a new sinusoidal gust generator mechanism concept, designed and built at the Instituto de Microgravedad “Ignacio Da Riva” of the Universidad Politécnica de Madrid, (IDR/UPM). The main characteristic of this wind tunnel is the ability to generate a flow with a uniform velocity profile and a sinusoidal time fluctuation of the speed. Experimental tests have been devoted to study the effect of unsteady flows on bluff bodies lying on the ground. Two theoretical models have been proposed to measure the external and internal pressure loads respectively. In order to meet the need of creating sinusoidal wind gusts to check the theoretical model predictions, the gust wind tunnel maximum flow speed and, gust frequency in the test section have been limited to 30 m/s and 10 Hz, respectively have been obtained. The test section is 0.39 m × 0.54 m, which is suitable to perform experiments with testing models. It is shown that, in the range of parameters explored, the experimental results are in good agreement with the theoretical model predictions. Experimental tests have been performed to study the unsteady flow effects, which can help in clarifying the phenomenon of the external pressure loads on bluff bodies under gusty winds: and also to study internal pressure loads, which depend on the size of the venting holes of the building. Finally, the contribution of the unsteady flow terms in the theoretical model has been analyzed, and the pressure jumps due to the unsteady pressure losses through the venting holes have been characterized.

La participación de los jóvenes universitarios en la planificación urbana. Estudios de caso de Lisboa, Madrid y Fortaleza

La participación de los jóvenes en los procesos de planificación urbana en Lisboa, Madrid y Fortaleza ha sido tema central de la presente tesis. Los principales objetivos perseguidos consisten en: caracterizar y analizar críticamente las dimensiones más importantes de la participación de jóvenes universitarios en los procesos participativos; aportar características de interés juvenil para un “modelo” de planificación urbana; elaborar directrices para el diseño de actuaciones en un proceso urbano participativo desde la perspectiva de los jóvenes; establecer el alcance de un instrumento urbano participativo reglamentado por el gobierno local entre los jóvenes; determinar si la percepción de los jóvenes universitarios acerca de las acciones del gobierno local tiene influencia en los procesos participativos. El universo estadístico de la muestra lo conforman la totalidad de 737 jóvenes universitarios encuestados en Lisboa, Madrid y Fortaleza. Que se distribuye en 104 encuestados en Lisboa, 329 en Madrid, y 304 en la ciudad de Fortaleza. El cuestionario contiene preguntas: abiertas, cerradas y mixtas. La mayor parte de las cuestiones son cerradas, y en cuanto a las opciones de respuesta: en muchas preguntas se ha aplicado, una escala tipo Likert, entre 1 y 4, siendo 4 el grado más alto (totalmente de acuerdo), y 1 el grado más bajo (nada de acuerdo), y para otras, una opción múltiple, con solamente una opción de respuesta. Se realizó un cuestionario de 31 preguntas en Lisboa, y tras su aplicación y obtención de resultados se revisó y mejoró obteniendo un cuestionario de 23 preguntas que fue aplicado en Madrid y Fortaleza. Se realizan análisis descriptivos, y algún análisis factorial en diversas preguntas del cuestionario, y se estudian diferencias en función de las variables sociodemográficas planteadas. Los resultados constatan que es muy baja la participación en los procesos institucionalizados por el gobierno local, en contrapartida es bastante alta en los procesos organizados por los ciudadanos. La información limita la participación de los jóvenes y ya que estos reconocen como motivación estar más y mejor informados y controlar y acompañar las acciones de su gobierno local. Por otra parte, desean participar en grupo en foros y debates presenciales. Los jóvenes madrileños consideran que las etapas más importantes en un proceso urbano participativo son: información, seguimiento y evaluación, mientras que para los jóvenes de Fortaleza son: Fiscalización, concienciación e información. Se ha verificado que desde la percepción de los jóvenes de Lisboa los ciudadanos son consultados en los procesos urbanos participativos y de acuerdo con los jóvenes de Madrid y Fortaleza los ciudadanos son dirigidos, influenciados y manipulados. Los problemas de carácter urbano no tienen una conceptualización clara y precisa entre los jóvenes universitarios y los problemas urbanos que más afectan la vida de los jóvenes universitarios son aparcamientos, contaminación y seguridad urbana. Sin embargo, los transportes son apuntados por los jóvenes universitarios de Lisboa, Madrid y Fortaleza. Además no saben identificar los problemas de su barrio. Así como de las causas y consecuencias y soluciones de los problemas urbanos. Eligen como mejor estrategia para desarrollar un proceso urbano participativo el acuerdo entre técnicos, población y el gobierno local. Los jóvenes universitarios de Fortaleza apuntan directrices para una planificación urbana con énfasis en la seguridad urbana, la sostenibilidad y la investigación, tecnología e innovación. Por otro lado, los jóvenes universitarios de Madrid perfilan tres “modelos” de planificación urbana: un “Modelo” socio-económica, un “Modelo” sostenible e innovadora y un “Modelo” de Planificación Urbana con énfasis en espacios públicos, entretenimiento, seguridad urbana y deporte. Los jóvenes universitarios rechazan la idea que la planificación urbana lleva en cuenta sus perspectivas y opiniones. Respeto al Presupuesto Participativo, el alcance de dicho proceso entre los jóvenes universitarios es extremamente bajo. Sin embargo, opinan que la aproximación entre ciudadanos, técnicos y gobierno en los procesos de Presupuesto Participativo mejora la rendición de cuentas. Además los jóvenes creen que dichos procesos conceden un poder moderado a los ciudadanos, y consideran que el poder concedido en los procesos urbanos influye directamente en el interés y empeño en participar. ABSTRACT Youth participation in urban planning processes in Lisbon, Madrid and Fortaleza is the main subject of this thesis. Our key goals are the following: characterising and critically analysing the most important dimensions of young university students’ participation in participative processes; providing features of interest for the young for an urban planning “model”; developing a variety of guidelines for designing actions in a participative urban process from the perspective of young people; analysing the impact upon the young of a participative urban instrument implemented by the local government; determining whether young university students’ perception of local government actions influences participative processes. The statistical universe of the sample comprises a total of 737 young university students who were surveyed in Lisbon, Madrid and Fortaleza, distributed as follows: 104 respondents in Lisbon, 329 in Madrid, and 304 in Fortaleza. The survey is made up of open-ended, closed-ended and mixed questions. Most questions are closed-ended. Regarding the answer options, a Likert-type scale has been used in many questions. The scale ranges from 1 to 4, 4 being the highest value (completely agree) and 1 the lowest (completely disagree). Besides, there are multiple-choice questions with only one possible answer. A 31- question survey was conducted in Lisbon. After the survey was run and the results were obtained, it was reviewed and improved. The improved version was a 23- question survey which was conducted in Madrid and Fortaleza. Descriptive analyses as well as some factorial analyses are carried out in several questions, and differences are studied depending on the socio-demographic variables involved. The results show that participation in processes implemented by local governments is very low. In contrast, participation is quite high in processes organised by citizens. Information limits youth participation, as young people point out that they are motivated by more and better information and by the possibility of monitoring and keeping track of their local government actions. They also wish to take part in face-to-face group forums and discussions. Young people from Madrid think that the most important stages in participative urban processes are information, follow-up and assessment, whereas young people from Fortaleza highlight tax matters, awareness and information. It has been confirmed that Lisbon youth perceive that citizens are consulted in participative urban processes. Youth from Madrid and Fortaleza, on the other hand, state that citizens are directed, influenced and manipulated. Young university students do not have a clear, precise concept of urban problems. Among these, they are most affected by car parks, pollution and urban safety, but the transport problem is pointed out by young university students from Lisbon, Madrid and Fortaleza. Furthermore, they cannot identify the problems in their neighbourhoods, nor are they able to specify the causes, consequences and solutions of urban problems. Their preferred strategy for developing a participative urban process is an agreement between technicians, the population and the local government. Young university students from Fortaleza suggest guidelines for an urban planning approach emphasising urban safety, sustainability and research, technology and innovation. Those from Madrid, for their part, outline three urban planning “models”: a socioeconomic “model”, a sustainable and innovative “model”, and an urban planning “model” with a focus on public areas, entertainment, urban safety and sport. Young university students disagree that urban planning takes their perspectives and views into account. Moreover, the impact of the Participative Budget upon their lives is extremely low. In their opinion, however, closer collaboration between citizens, technicians and governments in Participative Budget processes promotes accountability. The young also think that these processes give moderate power to citizens, and in their view the power that can be exerted in urban processes directly influences the interest in participating and the will to do so.

Aerodynamic external pressure loads on a semi-circular bluff body under wind gusts

This brief communication concerns the unsteady aerodynamic external pressure loads acting on a semi-circular bluff body lying on a floor under wind gusts and describes the theoretical model, experimental setup, and experimental results obtained. The experimental setup is based on an open circuit, closed test section, low speed wind tunnel, which includes a sinusoidal gust generating mechanism, designed and built at the Instituto de Microgravedad “Ignacio Da Riva” of the Universidad Politécnica de Madrid (IDR/UPM). Based on the potential flow theory, a theoretical model has been proposed to analyse the problem, and experimental tests have been performed to study the unsteady aerodynamic loads on a semi-circular bluff body. By fitting the theoretical model predictions with the experimental results, influencing parameters of the unsteady aerodynamic loads are ascertained. The values of these parameters can help in clarifying the phenomenon of the external pressure loads on semi-circular bluff body under various gust frequencies. The theoretical model proposed allows the pressure variation to be split into two contributions, a quasi-steady term and an unsteady term with a simple physical meaning

Gust wind tunnel study on ballast pick-up by high-speed trains

This paper describes the experimental setup, procedure, and results obtained, concerning the dynamics of a body lying on a floor, attached to a hinge, and exposed to an unsteady flow, which is a model of the initiation of rotational motion of ballast stones due to the wind generated by the passing of a high-speed train. The idea is to obtain experimental data to support the theoretical model developed in Sanz-Andres and Navarro-Medina (J Wind Eng Ind Aerodyn 98, 772–783, (2010), aimed at analyzing the initial phase of the ballast train-induced-wind erosion (BATIWE) phenomenon. The experimental setup is based on an open circuit, closed test section, low-speed wind tunnel, with a new sinusoidal gust generator mechanism concept, designed and built at the IDR/UPM. The tunnel’s main characteristic is the ability to generate a flow with a uniform velocity profile and sinusoidal time fluctuation of the speed. Experimental results and theoretical model predictions are in good agreement.

Implementación de plug-ins para REAPER: módulo de reverberación convolutiva en tiempo real y sistema para la medición de respuestas acústicas en salas

Existen en el mercado numerosas aplicaciones para la generación de reverberación y para la medición de respuestas al impulso acústicas. Sin embargo, éstas son de precios muy elevados y/o no se permite acceder a su código y, mucho menos, distribuir de forma totalmente libre. Además, las herramientas que ofrecen para la medición de respuestas al impulso requieren de un tedioso proceso para la generación de la señal de excitación, su reproducción y grabación y, finalmente, su post-procesado. Este procedimiento puede llevar en ocasiones al usuario a cometer errores debido a la falta de conocimientos técnicos. El propósito de este proyecto es dar solución a algunos de los inconvenientes planteados. Con tal fin se llevó a cabo el desarrollo e implementación de un módulo de reverberación por convolución particionada en tiempo real, haciendo uso de software gratuito y de libre distribución. En concreto, se eligió la estación digital de trabajo (DAW. Digital Audio Worksation) REAPER de la compañía Cockos. Además de incluir las funcionalidades básicas de edición y secuenciación presentes en cualquier DAW, el programa incluye un entorno para la implementación de efectos de audio en lenguaje JS (Jesusonic), y se distribuye con licencias completamente gratuitas y sin limitaciones de uso. Complementariamente, se propone una extensión para REAPER que permite la medición de respuestas al impulso de recintos acústicos de una forma completamente automatizada y amigable para el usuario. Estas respuestas podrán ser almacenadas y posteriormente cargadas en el módulo de reverberación, permitiendo aplicar sobre nuestras pistas de audio la respuesta acústica de cualquier recinto en el que se hayan realizado medidas. La implementación del sistema de medida de respuestas se llevó a cabo empleando la herramienta ReaScript de REAPER, que permite la ejecución de pequeños scripts Python. El programa genera un Barrido Sinusoidal Logarítmico que excita el recinto acústico cuya respuesta se desea medir, grabando la misma en un archivo .wav. Este procedimiento es sencillo, intuitivo y está al alcance de cualquier usuario doméstico, ya que no requiere la utilización de sofisticado instrumental de medida. ABSTRACT. There are numerous applications in the market for the generation of reverb and measurement of acoustic impulse responses. However, they are usually very costly and closed source. In addition, the provided tools for measuring impulse responses require tedious processes for the generation and reproduction of the excitation signal, the recording of the response and its final post-processing. This procedure can sometimes drive the user to make mistakes due to the lack of technical knowledge. The purpose of this project is to solve some of the mentioned problems. To that end we developed and implemented a real-time partitioned convolution reverb module using free open source software. Specifically, the chosen software was the Cockos’ digital audio workstation (DAW) REAPER. In addition to the basic features included in any DAW, such as editing and sequencing, the program includes an environment for implementing audio effects in JS (Jesusonic) language of free distribution and features an unrestricted license. As an extension for REAPER, we propose a fully automated and user-friendly method for measuring rooms’ acoustic impulse responses. These will be stored and then loaded into the reverb module, allowing the user to apply the acoustical response of any room where measurement have been taken to any audio track. The implementation of the impulse response measurement system was done using REAPER’s ReaScript tool that allows the execution of small Python scripts. The program generates a logarithmic sine sweep that excites the room and its response is recorded in a .wav file. This procedure is simple, intuitive and it is accessible to any home user as it does not require the use of sophisticated measuring equipment.

Modeling the Real-Time Use of Reserves in the Joint Energy and Reserve Hourly Scheduling of a Pumped Storage Plant

This paper studies the impact that different approaches of modeling the real-time use of the secondary regulation reserves have in the joint energy and reserve hourly scheduling of a price-taker pumped-storage hydropower plant. The unexpected imbalance costs due to the error between the forecasted real-time use of the reserves and the actual value are also studied and evaluated for the different approaches. The proposed methodology is applied to a daily-cycle and closed-loop pumped-storage hydropower plant. Preliminary results show that the deviations in the water volume at the end of the day are important when the percentage of the real-time use of reserves is unknown in advance, and also that the total income in all approaches after correcting these deviations is significantly lower than the maximum theoretical income.

Electronic reserves: copyright and permissions

Electronic reserves present a new service option for libraries to provide needed materials during hours that the library is not open and to user groups located some distance from library collections. Possible changes to current copyright law and publishers permissions policies have delayed the development of electronic reserves in many libraries. This paper reviews the current state of electronic reserves materials in the publishing and library communities and presents the results of a survey of publishers to determine permissions policies for electronic materials. Issues of concern to both libraries and publishers are discussed.

Common molecular determinants of local anesthetic, antiarrhythmic, and anticonvulsant block of voltage-gated Na+ channels.

Voltage-gated Na+ channels are the molecular targets of local anesthetics, class I antiarrhythmic drugs, and some anticonvulsants. These chemically diverse drugs inhibit Na+ channels with complex voltage- and frequency-dependent properties that reflect preferential drug binding to open and inactivated channel states. The site-directed mutations F1764A and Y1771A in transmembrane segment IVS6 of type IIA Na+ channel alpha subunits dramatically reduce the affinity of inactivated channels for the local anesthetic etidocaine. In this study, we show that these mutations also greatly reduce the sensitivity of Na+ channels to state-dependent block by the class Ib antiarrhythmic drug lidocaine and the anticonvulsant phenytoin and, to a lesser extent, reduce the sensitivity to block by the class Ia and Ic antiarrhythmic drugs quinidine and flecainide. For lidocaine and phenytoin, which bind preferentially to inactivated Na+ channels, the mutation F1764A reduced the affinity for binding to the inactivated state 24.5-fold and 8.3-fold, respectively, while Y1771A had smaller effects. For quinidine and flecainide, which bind preferentially to the open Na+ channels, the mutations F1764A and Y1771A reduced the affinity for binding to the open state 2- to 3-fold. Thus, F1764 and Y1771 are common molecular determinants of state-dependent binding of diverse drugs including lidocaine, phenytoin, flecainide, and quinidine, suggesting that these drugs interact with a common receptor site. However, the different magnitude of the effects of these mutations on binding of the individual drugs indicates that they interact in an overlapping, but nonidentical, manner with a common receptor site. These results further define the contributions of F1764 and Y1771 to a complex drug receptor site in the pore of Na+ channels.

Positron-emission tomography studies of cross-modality inhibition in selective attentional tasks: closing the "mind's eye".

It is a familiar experience that we tend to close our eyes or divert our gaze when concentrating attention on cognitively demanding tasks. We report on the brain activity correlates of directing attention away from potentially competing visual processing and toward processing in another sensory modality. Results are reported from a series of positron-emission tomography studies of the human brain engaged in somatosensory tasks, in both "eyes open" and "eyes closed" conditions. During these tasks, there was a significant decrease in the regional cerebral blood flow in the visual cortex, which occurred irrespective of whether subjects had to close their eyes or were instructed to keep their eyes open. These task-related deactivations of the association areas belonging to the nonrelevant sensory modality were interpreted as being due to decreased metabolic activity. Previous research has clearly demonstrated selective activation of cortical regions involved in attention-demanding modality-specific tasks; however, the other side of this story appears to be one of selective deactivation of unattended areas.