Primary stability of two uncemented acetabular components of different geometry : hemispherical or peripherally enhanced?

Objective This study compared the primary stability of two commercially available acetabular components from the same manufacturer, which differ only in geometry; a hemispherical and a peripherally enhanced design (peripheral self-locking (PSL)). The objective was to determine whether altered geometry resulted in better primary stability. Methods Acetabular components were seated with 0.8 mm to 2 mm interference fits in reamed polyethylene bone substrate of two different densities (0.22 g/cm3 and 0.45 g/cm3). The primary stability of each component design was investigated by measuring the peak failure load during uniaxial pull-out and tangential lever-out tests. Results There was no statistically significant difference in seating force (p = 0.104) or primary stability (pull-out p = 0.171, lever-out p = 0.087) of the two components in the low-density substrate. Similarly, in the high-density substrate, there was no statistically significant difference in the peak pull-out force (p = 0.154) or lever-out moment (p = 0.574) between the designs. However, the PSL component required a significantly higher seating force thanthe hemispherical cup in the high-density bone analogue (p = 0.006). Conclusions Higher seating forces associated with the PSL design may result in inadequate seating and increased risk of component malpositioning or acetabular fracture in the intra-operative setting in high-density bone stock. Our results, if translated clinically, suggest that a purely hemispherical geometry may have an advantage over a peripherally enhanced geometry in high density bone stock.

Examining workload models in online and blended teaching

Over the past decade, most Australian universities have moved increasingly towards online course delivery for both undergraduate and graduate programs. In almost all cases, elements of online teaching are part of routine teaching loads. Yet detailed and accurate workload data are not readily available. As a result, institutional policies on academic staff workload are often guided more by untested assumptions about reduction of costs per student unit, rather than being evidence-based, with the result that implementation of new technologies for online teaching has resulted in poorly defined workload expectations. While the academics in this study often revealed a limited understanding of their institutional workload formulas, which in Australia are negotiated between management and the national union through their local branches, the costs of various types of teaching delivery have become a critical issue in a time of increasing student numbers, declining funding, pressures to increase quality and introduce minimum standards of teaching and curriculum, and substantial expenditure on technologies to support e-learning. There have been relatively few studies on the costs associated with workload for online teaching, and even fewer on the more ubiquitous ‘blended’, ‘hybrid’ or ‘flexible’ modes, in which face-to-face teaching is supplemented by online resources and activities. With this in mind the research reported here has attempted to answer the following question: What insights currently inform Australian universities about staff workload when teaching online?

The essential parameters of a resource-based carrying capacity assessment model : an Australian case study

Carrying capacity assessments model a population’s potential self-sufficiency. A crucial first step in the development of such modelling is to examine the basic resource-based parameters defining the population’s production and consumption habits. These parameters include basic human needs such as food, water, shelter and energy together with climatic, environmental and behavioural characteristics. Each of these parameters imparts land-usage requirements in different ways and varied degrees so their incorporation into carrying capacity modelling also differs. Given that the availability and values of production parameters may differ between locations, no two carrying capacity models are likely to be exactly alike. However, the essential parameters themselves can remain consistent so one example, the Carrying Capacity Dashboard, is offered as a case study to highlight one way in which these parameters are utilised. While examples exist of findings made from carrying capacity assessment modelling, to date, guidelines for replication of such studies in other regions and scales have largely been overlooked. This paper addresses such shortcomings by describing a process for the inclusion and calibration of the most important resource-based parameters in a way that could be repeated elsewhere.

Development of a bi-material representative volume element using damaged homogenisation approach

Most civil engineering structures are formed using a number of materials that are bonded to each other with their surface-to-surface interaction playing key role on the overall response of the structure. Unfortunately these interactions are extremely variable; simplified and extremely detailed models trialed to date prove quite complex. Models that assume perfect interaction, on the other hand, predict unsafe behavior. In this paper a damage mechanics based interaction between two materials of different softening properties is developed using homogenisation approach. This paper describes the process of developing a bi-material representative volume element (RVE) using damaged homogenisation approach. The novelty in this paper is the development of non-local transient damage identification algorithm. Numerical examples prove the stability of the approach for a simplified RVE and encourage application to other shapes of RVEs.

Co-creating knowledge online : approaches for community artists

Forming peer alliances to share and build knowledge is an important aspect of community arts practice, and these co-creation processes are increasingly being mediated by the internet. This paper offers guidance for practitioners who are interested in better utilising the internet to connect, share, and make new knowledge. It argues that new approaches are required to foster the organising activities that underpin online co-creation, building from the premise that people have become increasingly networked as individuals rather than in groups (Rainie and Wellman 2012: 6), and that these new ways of connecting enable new modes of peer-to-peer production and exchange. This position advocates that practitioners move beyond situating the internet as a platform for dissemination and a tool for co-creating media, to embrace its knowledge collaboration potential. Drawing on a design experiment I developed to promote online knowledge co-creation, this paper suggests three development phases – developing connections, developing ideas, and developing agility – to ground six methods. They are: switching and routing, engaging in small trades of ideas with networked individuals; organising, co-ordinating networked individuals and their data; beta-release, offering ‘beta’ artifacts as knowledge trades; beta-testing, trialing and modifying other peoples ‘beta’ ideas; adapting, responding to technological disruption; and, reconfiguring, embracing opportunities offered by technological disruption. These approaches position knowledge co-creation as another capability of the community artist, along with co-creating art and media.

Fine tuning of elasticity via crosslinking collagen-based materials to mediate mechanotransduction and stability using corona treatment

The common goal of tissue engineering is to develop substitutes that can closely mimic the structure of extracellular matrix (ECM). However, similarly important is the intensive material properties which have often been overlooked, in particular, for soft tissues that are not to bear load assumingly. The mechanostructural properties determine not only the structural stability of biomaterials but also their physiological functionality by directing cellular activity and regulating cell fate decision. The aim here is to emphasize that cells could sense intensive material properties like elasticity and reside, proliferate, migrate and differentiate accordinglyno matter if the construct is from a natural source like cartilage, skin etc. or of synthetic one. Meanwhile, the very objective of this work is to provide a tunable scheme for manipulating the elasticity of collagen-based constructs to be used to demonstrate how to engineer cell behavior and regulate mechanotransduction. Articular cartilage was chosen as it represents one of the most complex hierarchical arrangements of collagen meshwork in both connective tissues and ECM-like biomaterials. Corona discharge treatment was used to produce constructs with varying density of crosslinked collagen and stiffness accordingly. The results demonstrated that elastic modulus increased up to 33% for samples treated up to one minute as crosslink density was found to increase with exposure time. According to the thermal analysis, longer exposure to corona increased crosslink density as the denaturation enthalpy increased. However the spectroscopy results suggested that despite the stabilization of the collagen structure the integrity of the triple helical structure remained intact. The in vitro superficial culture of heterologous chondrocytes also determined that the corona treatment can modulate migration with increased focal adhesion of cells due to enhanced stiffness, without cytotoxicity effects, and providing the basis for reinforcing three-dimensional collagen-based biomaterials in order to direct cell function and mediate mechanotransduction.

The acute effects of eccentrically-biased versus conventional weight training in older adults : a randomised controlled cross-over study

Background Whilst resistance training has been proven to convey considerable benefits to older people; immediately post-exercise there may be elevated transient risks for cardiac events and falls. Objectives and Measurements We assessed the acute effects of eccentrically-biased (EB) and conventional (CONV) resistance exercise on: platelet number, activation and granule exocytsosis; and mean velocity of centre of pressure displacement (Vm). Design, Setting, Participants and Intervention Ten older adults (7 males, 3 females; 69 ± 4 years) participated in this randomised controlled cross-over study in which they performed EB and CONV training sessions that were matched for total work and a control condition. Results Immediately post-exercise there was a statistically significant difference in platelet count between the control condition, in which it fell (pre 224 ± 35 109/L; post 211 ± 30 109/L: P < 0.05) and CONV in which it increased (pre 236 ± 55 109/L; post 242 ± 51 109/L: P > 0.05). There was no change in platelet activation and granule exocytsosis or Vm following EB and CONV. Conclusions Overall, while minor differences between regimens were observed, no major adverse effect on parameters of platelet function or centre of pressure displacement were observed acutely following either regimen. Eccentrically-biased and conventional resistance exercise training regimens do not appear to present an elevated acute risk in the context of changes to platelet function contributing to a cardiac event or postural stability increasing falls risk for apparently healthy older adults.

Online belongings : female fan experiences in online soccer forums

Introduction: The Paradox at the Heart of Online Interaction

Patron-driven acquisition of online video

Letting the patron choose ebooks has been a successful experience. Why not apply the same purchase model to other formats? This showcase outlines Queensland University of Technology’s experience with a trial of patron driven acquisition (PDA) for online video. The trial commencing in August 2012 provided access to over 700 online videos licensed from Kanopy across a number of discipline areas. As online video publishing is still in the early stages of development, and as the trial is only in the very early stages, it is too early to draw any firm conclusions about the likely suitability of this model for online video selection and acquisition. However, the trial provides some interesting initial comparisons with ebook PDA and existing online video purchase models and prompts further consideration of PDA as a method for online video selection and licensing.

Development of a new signal processing diagnostic tool for vibration signals acquired in transient conditions

The diagnostics of mechanical components operating in transient conditions is still an open issue, in both research and industrial field. Indeed, the signal processing techniques developed to analyse stationary data are not applicable or are affected by a loss of effectiveness when applied to signal acquired in transient conditions. In this paper, a suitable and original signal processing tool (named EEMED), which can be used for mechanical component diagnostics in whatever operating condition and noise level, is developed exploiting some data-adaptive techniques such as Empirical Mode Decomposition (EMD), Minimum Entropy Deconvolution (MED) and the analytical approach of the Hilbert transform. The proposed tool is able to supply diagnostic information on the basis of experimental vibrations measured in transient conditions. The tool has been originally developed in order to detect localized faults on bearings installed in high speed train traction equipments and it is more effective to detect a fault in non-stationary conditions than signal processing tools based on spectral kurtosis or envelope analysis, which represent until now the landmark for bearings diagnostics.

‘Teachers flipping out’ beyond the online lecture : maximising the educational potential of video

While video is recognised as an important medium for teaching and learning in the digital age, many video resources are not as effective as they might be, because they do not adequately exploit the strengths of the medium. Presented here are some case studies of video learning resources produced for various courses in a university environment. This ongoing project attempts to identify pedagogic strategies for the use of video; learning situations in which video has the most efficacy; and what production techniques can be employed to make effective video learning resources.

Small signal stability analysis of power systems with high penetration of wind power

The integration of large amount of wind power into a power system imposes a new challenge for the secure and economic operation of the system. It is necessary to investigate the impacts of wind power generation on the dynamic behavior of the power system concerned. This paper investigates the impacts of large amount of wind power on small signal stability and the corresponding control strategies to mitigate the negative effects. The concepts of different types of wind turbine generators (WTGs) and the principles of the grid-connected structures of wind power generation systems are first briefly introduced. Then, the state-of-the-art of the studies on the impacts of WTGs on small signal stability as well as potential problems to be studied are clarified. Finally, the control strategies on WTGs to enhance power system damping characteristics are presented.

Australian Screen Producers Survey : online interactive

There is growing scholarly interest in the everyday work undertaken by screen producers in part prompted by disciplinary shifts (the ‘material turn’, the rise of creative industries research) and in part by major transformations in the business of media production and consumption in recent years. However, the production cultures and motivations of screen producers, particularly those working in emergent online and convergent media markets, remain poorly understood. The 2012 Australian Screen Producer survey, building upon research undertaken in the Australian Screen Content Producer Survey conducted in 2009, was a nation-wide survey-based study of screen content producers working in four industry segments: film, television, corporate and new media production. The broad objectives of the 2012 Australian Producer Survey study were to: • Provide deeper and more detailed analysis into the nature of digital media producers and their practices and how these findings compare to the practices of established screen media producers; • Interrogate issues around the pace of industry change, industry sentiment and how producers are adapting to a changing marketplace; and • Offer insight into the transitional pathways of established media producers into production for digital media markets. The Australian Screen Producer Survey Online Interactive provides users (principally filmmakers, scholars and policymakers) with direct access to raw survey data through an interactive website that allows them to customise queries according to particular interests. The Online Interactive therefore provides customisable findings – unlike ‘static’ research outputs – delineating the practices, attitudes, strategies, and aspirations of screen producers working in feature film, television and corporate production as well as those operating in an increasingly convergent digital media marketplace. The survey was developed by researchers at the ARC Centre of Excellence for Creative Industries and Innovation (CCI), Queensland University of Technology, Deakin University, the Centre for Screen Business at Australian Film Television and Radio School (AFTRS) and was undertaken in association with Bergent Research. The Online Interactive website (http://screenproducersurvey.com/) was developed with support from the Centre for Memory Imagination and Invention (CMII).

Dispute resolution across platforms : offshore gambling industry & EVE online

Contemporary online environments suffer from a regulatory gap; that is there are few options for participants between customer service departments and potentially expensive court cases in foreign jurisdictions. Whatever form of regulation ultimately fills that gap will be charged with determining whether specific behavior, within a specific environment, is fair or foul; whether it’s cheating or not. However, cheating is a term that, despite substantial academic study, remains problematic. Is anything the developer doesn’t want you to do cheating? Is it only if your actions breach the formal terms of service? What about the community norms, do they matter at all? All of these remain largely unresolved questions, due to the lack of public determination of cases in such environments, which have mostly been settled prior to legal action. In this paper, I propose a re-branding of participant activity in such environments into developer-sanctioned, advantage play, and cheating. Advantage play, ultimately, is activity within the environment in which the player is able to turn the mechanics of the environment to their advantage without breaching the rules of the environment. Such a definition, and the term itself, is based on the usage of the term within the gambling industry, in which advantage play is considered betting with the advantage in the players’ favor rather than that of the house. Through examples from both the gambling industry and the Massively Multiplayer Role-Playing Game Eve Online, I consider the problems in defining cheating, suggest how the term ‘advantage play’ may be useful in understanding participants behavior in contemporary environments, and ultimately consider the use of such terminology in dispute resolution models which may overcome this regulatory gap.