A comparative study of prognostic model for bearing failure

An effective prognostics program will provide ample lead time for maintenance engineers to schedule a repair and to acquire replacement components before catastrophic failures occur. This paper presents a technique for accurate assessment of the remnant life of machines based on health state probability estimation technique. For comparative study of the proposed model with the proportional hazard model (PHM), experimental bearing failure data from an accelerated bearing test rig were used. The result shows that the proposed prognostic model based on health state probability estimation can provide a more accurate prediction capability than the commonly used PHM in bearing failure case study.

Local buckling studies of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential and commercial buildings as primary load bearing structural elements. They are often made of thin steel sheets and hence they are more susceptible to local buckling. The buckling behaviour of cold-formed steel compression members under fire conditions is not fully investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken to investigate the local buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. First a series of 91 local buckling tests was conducted at ambient and uniform elevated temperatures up to 700oC on cold-formed lipped and unlipped channels. Suitable finite element models were then developed to simulate the behaviour of tested columns and were validated using test results. All the ultimate load capacity results for local buckling were compared with the predictions from the available design rules based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Parts 1.2 and 1.3 and the direct strength method (DSM), based on which suitable recommendations have been made for the fire design of cold-formed steel compression members subject to local buckling at uniform elevated temperatures.

Comparative exploration of narrative processes for better and poorer outcomes for depression

Background Contemporary psychotherapy research demonstrates that whilst most clients respond positively to psychological interventions, a small, but significant proportion of clients fail to experience the expected benefits of therapy. Although methodologies exist that enable the identification of successful and unsuccessful therapy, we have a limited understanding of the processes associated with these outcomes. Aim The current study sought to examine the relationship between therapeutic outcome and therapeutic language. Methodology: The therapeutic outcomes of 42 trainee-therapists who provided psychotherapy to 173 clients were tracked with the OQ-45.2 over a 5 year period with the view of identifying the client/ trainee-therapist dyads with the best and poorest outcomes. The 6 best outcome and 6 poorest outcome client/ trainee-therapist dyads were identified in order to examine the characteristics of therapeutic conversations associated with better and poorer therapy outcomes. Therapeutic conversations were analysed with the Narrative Process Coding System. Findings The best outcome client/ trainee-therapist dyads demonstrated significant increases in reflexive conversation over the course of psychotherapy. Implications Examining the practices of the best and poorest outcome client/ trainee-therapist dyads with objective measures of therapy outcome provides an important first step in understanding how therapeutic language may contribute to the greatest therapeutic improvement or deterioration.

Anatomical studies of the flower, fruit and seeds of Myrceugenia rufa (Myrtaceae)

Myceugenia rufa is a rare and endemic species from the coast of central Chile. There are no published studies describing flower, fruit or seed anatomy. Forty-two accessions were collected from across the geographic range of the species. Reproductive structures were fixed, dehydrated, embedded in paraffin, sectioned and stained with Safranin O and Fast green. Anatomy of floral buds, mature flowers, fruits and seeds was described. Reproductive anatomy matches that of other Myrtaceae, such as presence of druses, internal phloem and schizogenous secretory cavities in buds, flowers, fruits and seeds. The anatomy and development of reproductive structures of M. rufa might enhance the understanding for future studies regarding natural reproduction and conservation programs.

Wastewater pollution abatement in China: A comparative study of fifteen industrial sectors from 1998 to 2010

This study analyzes the management of wastewater pollutants in a number of Chinese industrial sectors from 1998 to 2010. We use decomposition analysis to calculate changes in wastewater pollutant emissions that result from cleaner production processes, end-of-pipe treatment, structural changes in industry, and changes in the scale of production. We focus on one indicator of water quality and three pollutants: chemical oxygen demand (COD), petroleum, cyanide, and volatile phenols. We find that until 2002, COD emissions were mainly reduced through end-of-pipe treatments. Cleaner production processes didn’t begin contributing to COD emissions reductions until the introduction of a 2003 law that enforced their implementation. Petroleum emissions were primarily lowered through cleaner production mechanisms, which have the added benefit of reducing the input cost of intermediate petroleum. Diverse and effective pollution abatement strategies for cyanide and volatile phenols are emerging among industries in China. It will be important for the government to consider differences between industries should they choose to regulate the emissions of specific chemical substances.

Comparative analysis of gill transcriptomes of two freshwater crayfish, Cherax cainii and C. destructor

We undertook deep sequencing of gill transcriptomes from two freshwater crayfish, Cherax cainii and Cherax destructor, in order to generate genomic resources for future genomics research. Over 83 and 100 million high quality (quality score (Q) ≥ 30) paired-end Illumina reads (150 bp) were assembled into 147,101 and 136,622 contigs in C. cainii and C. destructor, respectively. A total of 24,630 and 23,623 contigs received significant BLASTx hits and allowed the identification of multiple gill expressed candidate genes associated with pH and salinity balance. These functionally annotated transcripts will provide a resource to facilitate comparative genomic research in the genus Cherax, and in particular allow insights into respiratory and osmoregulatory physiology of this group of animals.

Comparative analysis of genome maintenance genes in naked mole rat, mouse, and human

Genome maintenance (GM) is an essential defense system against aging and cancer, as both are characterized by increased genome instability. Here, we compared the copy number variation and mutation rate of 518 GM-associated genes in the naked mole rat (NMR), mouse, and human genomes. GM genes appeared to be strongly conserved, with copy number variation in only four genes. Interestingly, we found NMR to have a higher copy number of CEBPG, a regulator of DNA repair, and TINF2, a protector of telomere integrity. NMR, as well as human, was also found to have a lower rate of germline nucleotide substitution than the mouse. Together, the data suggest that the long-lived NMR, as well as human, has more robust GM than mouse and identifies new targets for the analysis of the exceptional longevity of the NMR.

Experimental studies of lipped channel beams subject to web crippling under ETF and ITF load cases

Lipped channel beams (LCBs) are commonly used as floor joists and bearers in buildings. However, they are subjected to specific failure modes such as web crippling. Despite considerable web crippling research, recent studies [1-6] have shown that the current web crippling design rules are unable to predict the test capacities under ETF and ITF load cases. In many instances, the predictions by the available design standards such as AISI S100, AS/NZS 4600 and Eurocode 3 Part 1-3 [7-9] are inconsistent. Hence thirty-six tests were conducted to assess the web crippling behaviour and strengths of LCBs under two flange load cases. Experimental web crippling capacities were then compared with the predictions from the current design rules. These comparisons showed that AS/NZS 4600 and AISI S100 design equations are very unconservative for LCB sections under ETF load case and are conservative for ITF load case. Hence improved equations were proposed to determine the web crippling capacities of LCBs. Suitable design rules were also developed using the direct strength method. This paper presents the details of this study and the results including improved design rules.

Correction: Genome-wide association studies of asthma in population-based cohorts confirm known and suggested loci and identify an additional association near HLA

Read the original article via 'related work' link below

Genome-Wide Association Studies of Asthma in Population-Based Cohorts Confirm Known and Suggested Loci and Identify an Additional Association near HLA

Rationale: Asthma has substantial morbidity and mortality and a strong genetic component, but identification of genetic risk factors is limited by availability of suitable studies. Objectives: To test if population-based cohorts with self-reported physician-diagnosed asthma and genome-wide association (GWA) data could be used to validate known associations with asthma and identify novel associations. Methods: The APCAT (Analysis in Population-based Cohorts of Asthma Traits) consortium consists of 1,716 individuals with asthma and 16,888 healthy controls from six European-descent population-based cohorts. We examined associations in APCAT of thirteen variants previously reported as genome-wide significant (P<5x10-8) and three variants reported as suggestive (P<5×10-7). We also searched for novel associations in APCAT (Stage 1) and followed-up the most promising variants in 4,035 asthmatics and 11,251 healthy controls (Stage 2). Finally, we conducted the first genome-wide screen for interactions with smoking or hay fever. Main Results: We observed association in the same direction for all thirteen previously reported variants and nominally replicated ten of them. One variant that was previously suggestive, rs11071559 in RORA, now reaches genome-wide significance when combined with our data (P = 2.4×10-9). We also identified two genome-wide significant associations: rs13408661 near IL1RL1/IL18R1 (PStage1+Stage2 = 1.1x10-9), which is correlated with a variant recently shown to be associated with asthma (rs3771180), and rs9268516 in the HLA region (PStage1+Stage2 = 1.1x10-8), which appears to be independent of previously reported associations in this locus. Finally, we found no strong evidence for gene-environment interactions with smoking or hay fever status. Conclusions: Population-based cohorts with simple asthma phenotypes represent a valuable and largely untapped resource for genetic studies of asthma. © 2012 Ramasamy et al.

Progress in spondylarthritis. Progress in studies of the genetics of ankylosing spondylitis

The advent of high-throughput SNP genotyping methods has advanced research into the genetics of common complex genetic diseases such as ankylosing spondylitis (AS) rapidly in recent times. The identification of associations with the genes IL23R and ERAP1 have been robustly replicated, and advances have been made in studies of the major histocompatibility complex genetics of AS, and of KIR gene variants and the disease. The findings are already being translated into increased understanding of the immunological pathways involved in AS, and raising novel potential therapies. The current studies in AS remain underpowered, and no full genomewide association study has yet been reported in AS; such studies are likely to add to the significant advances that have already been made.

Genetic studies of common rheumatological diseases

Editorial

A comparative study of antibody expressions in primary biliary cirrhosis and autoimmune cholangitis using phage display

Primary biliary cirrhosis (PBC) and autoimmune cholangitis (AIC) are serologic expressions of an autoimmune liver disease affecting biliary ductular cells. Previously we screened a phage-displayed random peptide library with polyclonal IgG from 2 Australian patients with PBC and derived peptides that identified a single conformational (discontinuous) epitope in the inner lipoyl domain of the E2 subunit of the pyruvate dehydrogenase complex (PDC-E2), the characteristic autoantigen in PBC. Here we have used phage display to investigate the reactivity of PBC sera from 2 ethnically and geographically distinct populations, Japanese and Australian, and the 2 serologic expressions, PBC and AIC. Random 7-mer and 12-mer peptide libraries were biopanned with IgG from 3 Japanese patients with PBC and 3 with AIC who did not have anti-PDC-E2. The phage clones (phagotopes) obtained were tested by capture enzyme-linked immunosorbent assay (ELISA) for reactivity with affinity-purified anti-PDC-E2, and compared with those obtained from Australian patients with PBC. Peptide sequences of the derived phagotopes and sequences derived by biopanning with irrelevant antisera were aligned to develop a guide tree based on physicochemical similarity. Both Australian and Japanese PBC-derived phagotopes were distributed in branches of the guide tree that contained the peptide sequences MH and FV previously identified as part of an immunodominant conformational epitope of PDC-E2, indicating that epitope selection was not influenced by the racial origin of the PBC sera. Biopanning with either PBC or AIC-derived IgG yielded phagotopes that reacted with anti-PDC-E2 by capture ELISA, further establishing that there is a similar autoimmune targeting in PBC and AIC.

Neuropsychological studies of late onset and subthreshold diagnoses of adult Attention-Deficit/Hyperactivity Disorder

Background Diagnosing attention-deficit/hyperactivity disorder (ADHD) in adults is difficult when the diagnostician cannot establish an onset prior to the DSM-IV criterion of age 7 or if the number of symptoms recalled does not achieve the DSM-IV threshold for diagnosis. Because neuropsychological deficits are associated with ADHD, we addressed the validity of the DSM-IV age at onset and symptom threshold criteria by using neuropsychological test scores as external validators. Methods We compared four groups of adults: 1) full ADHD subjects met all DSM-IV criteria for childhood-onset ADHD; 2) late-onset ADHD subjects met all criteria except the age at onset criterion; 3) subthreshold ADHD subjects did not meet full symptom criteria; and 4) non-ADHD subjects did not meet any of the above criteria. Results Late-onset and full ADHD subjects had similar patterns of neuropsychological dysfunction. By comparison, subthreshold ADHD subjects showed few neuropsychological differences with non-ADHD subjects. Conclusions Our results showing similar neuropsychological underpinning in subjects with late-onset ADHD suggest that the DSM-IV age at onset criterion may be too stringent. Our data also suggest that ADHD subjects who failed to ever meet the DSM-IV threshold for diagnosis have a milder form of the disorder.

Genetic studies of osteoporosis: A rethink required

It has been 10 years since the seminal paper by Morrison and colleagues reporting the association of alleles of the vitamin D receptor and bone density [1], a paper which arguably kick-started the study of osteoporosis genetics. Since that report there have been literally thousands of osteoporosis genetic studies published, and large numbers of genes have been reported to be associated with the condition [2]. Although some of these reported associations are undoubtedly true, this snow-storm of papers and abstracts has clouded the field to such a great extent that it is very difficult to be certain of the veracity of most genetic associations reported hereto. The field needs to take stock and reconsider the best way forward, taking into account the biology of skeletal development and technological and statistical advances in human genetics, before more effort and money is wasted on continuing a process in which the primary achievement could be said to be a massive paper mountain. I propose in this review that the primary reasons for the paucity of success in osteoporosis genetics has been: •the absence of a major gene effect on bone mineral density (BMD), the most commonly studied bone phenotype; •failure to consider issues such as genetic heterogeneity, gene–environment interaction, and gene–gene interaction; •small sample sizes and over-optimistic data interpretation; and •incomplete assessment of the genetic variation in candidate genes studied.