Wind Turbine Direct-Drive Permanent-Magnet Generator with Direct Liquid Cooling for Mass Reduction

Today’s electrical machine technology allows increasing the wind turbine output power by an order of magnitude from the technology that existed only ten years ago. However, it is sometimes argued that high-power direct-drive wind turbine generators will prove to be of limited practical importance because of their relatively large size and weight. The limited space for the generator in a wind turbine application together with the growing use of wind energy pose a challenge for the design engineers who are trying to increase torque without making the generator larger. When it comes to high torque density, the limiting factor in every electrical machine is heat, and if the electrical machine parts exceed their maximum allowable continuous operating temperature, even for a short time, they can suffer permanent damage. Therefore, highly efficient thermal design or cooling methods is needed. One of the promising solutions to enhance heat transfer performances of high-power, low-speed electrical machines is the direct cooling of the windings. This doctoral dissertation proposes a rotor-surface-magnet synchronous generator with a fractional slot nonoverlapping stator winding made of hollow conductors, through which liquid coolant can be passed directly during the application of current in order to increase the convective heat transfer capabilities and reduce the generator mass. This doctoral dissertation focuses on the electromagnetic design of a liquid-cooled direct-drive permanent-magnet synchronous generator (LC DD-PMSG) for a directdrive wind turbine application. The analytical calculation of the magnetic field distribution is carried out with the ambition of fast and accurate predicting of the main dimensions of the machine and especially the thickness of the permanent magnets; the generator electromagnetic parameters as well as the design optimization. The focus is on the generator design with a fractional slot non-overlapping winding placed into open stator slots. This is an a priori selection to guarantee easy manufacturing of the LC winding. A thermal analysis of the LC DD-PMSG based on a lumped parameter thermal model takes place with the ambition of evaluating the generator thermal performance. The thermal model was adapted to take into account the uneven copper loss distribution resulting from the skin effect as well as the effect of temperature on the copper winding resistance and the thermophysical properties of the coolant. The developed lumpedparameter thermal model and the analytical calculation of the magnetic field distribution can both be integrated with the presented algorithm to optimize an LC DD-PMSG design. Based on an instrumented small prototype with liquid-cooled tooth-coils, the following targets have been achieved: experimental determination of the performance of the direct liquid cooling of the stator winding and validating the temperatures predicted by an analytical thermal model; proving the feasibility of manufacturing the liquid-cooled tooth-coil winding; moreover, demonstration of the objectives of the project to potential customers.

Co-creating value with customers as a new approach of entering new market

Global trends associated with development of information technology, globalization, industrial and economic changes are influencing on company and customer domains and thus transforming company-customer relationship. The company centric paradigm with a strong product focus shifts to a customer oriented one with a strong emphasis on customer collaboration. As a result, the customer role changes from a passive observer to an active player. Moreover, global trends contribute to transformation of competitive environment making it tougher and simplifying an access to resources previously considered as unique. All that factors push the companies towards cooperation with customers in order to identify unarticulated needs and finding the best possible solution to existing customer problems. The Master’s Thesis is done for Outotec (Lappeenranta) which considers extension of dewatering business in Russian coal market. Research aims to identify key features of coal preparation and dewatering of fine coal and tailings in Russian preparation plants; analyze the state of Russian coal market and evaluate market potential for Outotec dewatering solutions. The study has a qualitative nature and implements an action research methodology that involves both creation of knowledge and introduction of changes into the system. The base for taking actions is formed by theoretical framework that targets on describing company - customer interaction and has selected co-creation as the most appropriate method of customer involvement. The integration of co-creation approach into an action research cycle allows not only fulfilling the research objectives but also facilitates organizational learning and intraorganizational collaboration, assists in establishing customer contacts and making the first steps into the market, bringing new joint projects to the company and opening real business opportunities.

Reduction of intraspecific aggression in adult rats by neonatal treatment with a selective serotonin reuptake inhibitor

Most studies suggest that serotonin exerts an inhibitory control on the aggression process. According to experimental evidence, this amine also influences growth and development of the nervous tissue including serotoninergic neurons. Thus, the possibility exists that increased serotonin availability in young animals facilitates a long-lasting effect on aggressive responses. The present study aimed to investigate the aggressive behavior of adult rats (90-120 days) treated from the 1st to the 19th postnatal day with citalopram (CIT), a selective serotonin reuptake inhibitor (20 mg/kg, sc, every 3 days). Aggressive behavior was induced by placing a pair of rats (matched by weight) in a box (20 x 20 x 20 cm), and submitting them to a 20-min session of electric footshocks (five 1.6-mA - 2-s current pulses, separated by a 4-min intershock interval). When compared to the control group (rats treated for the same period with equivalent volumes of saline solution), the CIT group presented a 41.4% reduction in the duration of aggressive response. The results indicate that the repeated administration of CIT early in life reduces the aggressive behavior in adulthood and suggest that the increased brain serotoninergic activity could play a role in this effect.

A third generation regimen VACOP-B with or without adjuvant radiotherapy for aggressive localized non-Hodgkin's lymphoma: report from the Italian Non-Hodgkin's Lymphoma Co-operative Study Group

The objective of this multicenter prospective study was to determine the clinical efficacy and toxicity of a polychemotherapeutic third generation regimen, VACOP-B, with or without radiotherapy as front-line therapy in aggressive localized non-Hodgkin's lymphoma. Ninety-three adult patients (47 males and 46 females, median age 45 years) with aggressive localized non-Hodgkin's lymphoma, 43 in stage I and 50 in stage II (non-bulky), were included in the study. Stage I patients received VACOP-B for 6 weeks plus involved field radiotherapy and stage II patients received 12 weeks VACOP-B plus involved field radiotherapy on residual masses. Eighty-six (92.5%) achieved complete remission and 4 (4.3%) partial remission. Three patients (3.2%) were primarily resistant. Ten-year probability of survival, progression-free survival and disease-free survival were 87.3, 79.9 and 83.9%, respectively. Eighty-four patients are surviving at a median observation time of 57 months (range: 6-126). Statistical analysis showed no difference between stages I and II in terms of response, ten-year probability of survival, progression-free survival or disease-free survival. Side effects and toxicity were negligible and were similar in the two patient groups. The results of this prospective study suggest that 6 weeks of VACOP-B treatment plus radiotherapy may be the therapy of choice in stage I aggressive non-Hodgkin's lymphoma. Twelve weeks of VACOP-B treatment with or without radiotherapy was shown to be effective and feasible for stage II. These observations need to be confirmed by a phase III study comparing first and third generation protocols in stage I-II aggressive non-Hodgkin's lymphoma.

Unequal Teeth Widths for Torque Ripple Reduction in Permanent Magnet Synchronous Machines With Fractional-Slot Non-Overlapping Windings

Permanent magnet synchronous machines with fractional-slot non-overlapping windings (FSPMSM), also known as tooth-coil winding permanent magnet synchronous machines (TCW PMSM), have been under intensive research during the latest decade. There are many optimization routines explained and implemented in the literature in order to improve the characteristics of this machine type. This paper introduces a new technique for torque ripple minimization in TCW PMSM. The source of torque harmonics is also described. The low order torque harmonics can be harmful for a variety of applications, such as direct drive wind generators, direct drive light vehicle electrical motors, and for some high precision servo applications. The reduction of the torque ripple harmonics with the lowest orders (6th and 12th) is realized by machine geometry optimization technique using finite element analysis (FEA). The presented optimization technique includes the stator geometry adjustment in TCW PMSMs with rotor surface permanent magnets and with rotor embedded permanent magnets. Influence of the permanent magnet skewing on the torque ripple reduction and cogging torque elimination was also investigated. It was implemented separately and together with the stator optimization technique. As a result, the reduction of some torque ripple harmonics was attained.

Biomass Utilization in PFC Co-firing System with the Slagging and Fouling Analysis

Master’s thesis Biomass Utilization in PFC Co-firing System with the Slagging and Fouling Analysis is the study of the modern technologies of different coal-firing systems: PFC system, FB system and GF system. The biomass co-fired with coal is represented by the research of the company Alstom Power Plant. Based on the back ground of the air pollution, greenhouse effect problems and the national fuel security today, the bioenergy utilization is more and more popular. However, the biomass is promoted to burn to decrease the emission amount of carbon dioxide and other air pollutions, new problems form like slagging and fouling, hot corrosion in the firing systems. Thesis represent the brief overview of different coal-firing systems utilized in the world, and focus on the biomass-coal co-firing in the PFC system. The biomass supply and how the PFC system is running are represented in the thesis. Additionally, the new problems of hot corrosion, slagging and fouling are mentioned. The slagging and fouling problem is simulated by using the software HSC Chemistry 6.1, and the emissions comparison between coal-firing and co-firing are simulated as well.

There is no difference in hepatic fibrosis rates of patients infected with hepatitis C virus and those co-infected with HIV

Some studies have suggested that human immunodeficiency virus (HIV) infection modifies the natural history of hepatitis C virus (HCV) infection, accelerating the progression of fibrosis and the development of cirrhosis. Our objective was to evaluate the fibrosis progression rate (FPR) in HCV/HIV-co-infected patients, and to identify factors that may influence it. HCV-mono-infected and HCV/HIV-co-infected patients with a known date of HCV infection (transfusion or injection drug use) and a liver biopsy were included. The FPR was defined as the ratio between the fibrosis stage (Metavir score) and the estimated length of infection in years and the result was reported as fibrosis units per year. The factors studied were gender, age at infection, consumption of alcohol, aminotransferase levels, histological activity grade, HCV genotype and viral load, CD4 cell count, HIV viral load, and the use of antiretroviral therapy. Sixty-five HCV-infected (group 1) and 53 HCV/HIV-co-infected (group 2) patients were evaluated over a period of 19 months. The mean FPR of groups 1 and 2 was 0.086 ± 0.074 and 0.109 ± 0.098 fibrosis units per year, respectively (P = 0.276). There was a correlation between length of HCV infection and stage of fibrosis in both groups. The age at infection, the aspartate aminotransferase level (r = 0.36) and the inflammatory activity grade were correlated with the FPR (P < 0.001). No difference in FPR was found between HCV-mono-infected and HCV/HIV-co-infected patients.

Co-culture of apoptotic breast cancer cells with immature dendritic cells: a novel approach for DC-based vaccination in breast cancer

A dendritic cell (DC)-based vaccine strategy could reduce the risk of recurrence and improve the survival of breast cancer patients. However, while therapy-induced apoptosis of hepatocellular and colorectal carcinoma cells can enhance maturation and antigen presentation of DCs, whether this effect occurs in breast cancer is currently unknown. In the present study, we investigated the effect of doxorubicin (ADM)-induced apoptotic MCF-7 breast cancer cells on the activation of DCs. ADM-induced apoptotic MCF-7 cells could effectively induce immature DC (iDC) maturation. The mean fluorescence intensity (MFI) of DC maturity marker CD83 was 23.3 in the ADM-induced apoptotic MCF-7 cell group compared with 8.5 in the MCF-7 cell group. The MFI of DC co-stimulatory marker CD86 and HLA-DR were also increased after iDCs were treated with ADM-induced apoptotic MCF-7 cells. Furthermore, the proliferating autologous T-lymphocytes increased from 14.2 to 40.3% after incubated with DCs induced by apoptotic MCF-7 cells. The secretion of interferon-γ by these T-lymphocytes was also increased. In addition, cell-cell interaction between apoptotic MCF-7 cells and iDCs, but not soluble factors released by apoptotic MCF-7 cells, was crucial for the maturation of iDCs. These findings constitute a novel in vitro DC-based vaccine strategy for the treatment of breast cancer by ADM-induced apoptotic MCF-7 cells.

Tumor growth reduction is regulated at the gene level in Walker 256 tumor-bearing rats supplemented with fish oil rich in EPA and DHA

We investigated the effect of fish oil (FO) supplementation on tumor growth, cyclooxygenase 2 (COX-2), peroxisome proliferator-activated receptor gamma (PPARγ), and RelA gene and protein expression in Walker 256 tumor-bearing rats. Male Wistar rats (70 days old) were fed with regular chow (group W) or chow supplemented with 1 g/kg body weight FO daily (group WFO) until they reached 100 days of age. Both groups were then inoculated with a suspension of Walker 256 ascitic tumor cells (3×107 cells/mL). After 14 days the rats were killed, total RNA was isolated from the tumor tissue, and relative mRNA expression was measured using the 2-ΔΔCT method. FO significantly decreased tumor growth (W=13.18±1.58 vsWFO=5.40±0.88 g, P<0.05). FO supplementation also resulted in a significant decrease in COX-2 (W=100.1±1.62 vsWFO=59.39±5.53, P<0.001) and PPARγ (W=100.4±1.04vs WFO=88.22±1.46, P<0.05) protein expression. Relative mRNA expression was W=1.06±0.022 vsWFO=0.31±0.04 (P<0.001) for COX-2, W=1.08±0.02vs WFO=0.52±0.08 (P<0.001) for PPARγ, and W=1.04±0.02 vs WFO=0.82±0.04 (P<0.05) for RelA. FO reduced tumor growth by attenuating inflammatory gene expression associated with carcinogenesis.

Reduction of blood nitric oxide levels is associated with clinical improvement of the chronic pelvic pain related to endometriosis

The objective of this prospective study was to determine the plasma levels of nitric oxide (NO) in women with chronic pelvic pain secondary to endometriosis (n=24) and abdominal myofascial pain syndrome (n=16). NO levels were measured in plasma collected before and 1 month after treatment. Pretreatment NO levels (μM) were lower in healthy volunteers (47.0±12.7) than in women with myofascial pain (64.2±5.0, P=0.01) or endometriosis (99.5±12.9, P<0.0001). After treatment, plasma NO levels were reduced only in the endometriosis group (99.5±12.9 vs 61.6±5.9, P=0.002). A correlation between reduction of pain intensity and reduction of NO level was observed in the endometriosis group [correlation = 0.67 (95%CI = 0.35 to 0.85), P<0.0001]. Reduction of NO levels was associated with an increase of pain threshold in this group [correlation = -0.53 (-0.78 to -0.14), P<0.0001]. NO levels appeared elevated in women with chronic pelvic pain diagnosed as secondary to endometriosis, and were directly associated with reduction in pain intensity and increase in pain threshold after treatment. Further studies are needed to investigate the role of NO in the pathophysiology of pain in women with endometriosis and its eventual association with central sensitization.

Production of probiotic fresh white cheese using co-culture with Streptococcus thermophilus

In this research, the probiotic Streptococcus thermophilus was inoculated into milk as co-culture to produce probiotic cheese. The effects of using Streptococcus thermophilus with other probiotic bacteria on cheese composition, and microbiological viability during 28 days of storage were investigated. Sensorial properties were determined only at 1st and 28th days of storage. The results showed that the use of Streptococcus thermophilus as co-culture in probiotic cheese production did not affect negatively the cheese components. Fat and dry matter properties of cheese weren't influenced by added probiotic bacteria. However, different level of pH, salt and lactic acid were detected. All probiotic bacteria were present in high levels throughout storage of cheeses, above 7 Log cfu.g- 1, threshold required for probiotic activity. Sensory panel showed that the highest average sensory evaluation points were recorded in cheeses made with Streptococcus thermophilus plus Lactobacillus casei, whereas other probiotic bacteria combinations had been affected less in regard to taste or appearance.

Physicochemical characteristics and sensory acceptability of ready-to-eat sliced frozen roast beef with partial reduction of sodium chloride

Abstract Sodium chloride in meat products provides microbiological stability and desirable technological and sensory effects. Therefore, the reduction of this ingredient is a challenge for the meat industry. The objective of this study was to evaluate the physicochemical and sensory characteristics of ready-to-eat sliced frozen roast beef with partial replacement of sodium chloride by a commercial additive mostly composed of potassium chloride. The analyses performed were chemical composition, cooking yield and post defrosting loss, microbiological evaluation and sensory analysis. There was higher moisture content (p < 0.05) in the control treatment (without the presence of the replacement additive) and all treatments were not different (p ≥ 0.05) in the cooking yield and in post-defrosting loss. The results of microbiological analysis are according to Brazilian Legislation. The sensory evaluation showed no difference between the control treatment and the T1 treatment (with the reduction of 35% of NaCl), while the T2 treatment (with reduction of 70% of NaCl) had the lowest average values in all attributes. The study showed that the reduction of 35% NaCl for commercial additive, mostly composed of potassium chloride, in roast beef is feasible since no changes were observed in sensory and technological characteristics evaluated.