The political economy of food in schools : the case of Queensland State education

Food in schools is typically understood from a biomedical perspective. At practical, ideational and material levels, whether addressed pedagogically or bureaucratically, food in schools is generally considered from a natural sciences perspective. This perspective manifests as the bioenergetic principle of energy in versus energy out and appears in policy focused on issues such as obesity and physical activity. Despite the considerable literature on the sociology of food and eating, little is understood about food in schools from a sociological perspective. This oversight of one of the most fundamental requirements of the human condition--namely, food--should be of concern for educators. Investigating food through a political economy lens means understanding food in schools as part of broader economic, political, social and cultural conditions. Hence, a political economy of food and schooling is concerned with the formation of ideas about food relative to political, economic, and cultural ideologies in social practice. From a critical sociology study of food messages students receive in the primary school curriculum, this paper reports on some of the official food messages of an Australian state's education policy, as a case to highlight the current political economy of food in Australia. It examines the role of the corporate food industry in the formation of Australian food policy and how that policy created artefacts infused with competing messages. The paper highlights how food and nutrition policy moved from solely a health concern to incorporate an economic dimension and links that shift with the quality of food available in Queensland schools.

Determinants of place identity and dependence : the case of international tourism in Tanzania

This research examines the effects of expectation (perceived attractiveness) on satisfaction, place identity, and place dependence. Place identity and place dependence are viewed as relational components of choice and relate to deeper needs. This study proposes that these two relational components depend on transactional expectations, which are emergent and determined by past experiences and visitor goals. In a theoretically elaborated and tested Structural Equation Model (SEM) this study assumes that these relationships vary according to intentions to return. The study addresses the conditions under which loyalty intentions influence the deeper place attachments (place identity and place dependence) that visitors associate with attractive cultural and natural destinations. The model is tested on a sample of 504 international tourists visiting Tanzania during fall 2010, and explains 59% of variance in the predicted dependent variables. The results are linked to a discussion on loyalty programs.

Supreme Court Act 1995 (Qld) s 253 - leave to appeal costs orders - appeal against substantive judgment insufficient - must be arguable case that discretion will be overturned on appeal

The recent decision of the Court of Appeal in AGL Sales (Qld) Pty Ltd v Dawson Sales Pty Ltd [2009] QCA 262 provides clear direction on the Court’s expectations of a party seeking leave to appeal a costs order.This decision is likely to impact upon common practice in relation to appeals against costs orders. It sends a clear message to trial judges that they should not give leave as of course when giving a judgment in relation to costs, and that parties seeking leave under s 253 of the Supreme Court Act 1995 (Qld) should make a separate application. The application should be supported by material presenting an arguable case that the trial judge made an error in the exercise of the discretion of the kind described in House v King (1936) 55 CLR 499. A different, and interesting, aspect of this appeal is that it was the first wholly electronic civil appeal. The court-provided technology had been adopted at trial, and the Court of Appeal dispensed with any requirement for hard copy appeal record books.

Earthworks planning for road construction projects : a case study

In this paper we construct earthwork allocation plans for a linear infrastructure road project. Fuel consumption metrics and an innovative block partitioning and modelling approach are applied to reduce costs. 2D and 3D variants of the problem were compared to see what effect, if any, occurs on solution quality. 3D variants were also considered to see what additional complexities and difficulties occur. The numerical investigation shows a significant improvement and a reduction in fuel consumption as theorised. The proposed solutions differ considerably from plans that were constructed for a distance based metric as commonly used in other approaches. Under certain conditions, 3D problem instances can be solved optimally as 2D problems.

Alternative modes of entrepreneurial opportunity exploitation : the case on inter-organizational project

While entrepreneurship research has taken firm formation to be the predominant mode of opportunity exploitation, entrepreneurship can take place through many other types of organizational arrangements. In the present article, we consider one such alternative arrangement, namely the formation of inter-organizational projects (IOPs). We propose a multi-level contingency model that suggests that uncertainty both at the level of the firm and at the level of the environment makes the exploitation of opportunities through IOPs more likely. The model is tested by telephone survey data collected amongst a panel of 1725 SMEs and longitudinal industry data. Our findings provide strong support for the industry-level part of the model, but interestingly, only partial support for the firm level part of the model. This indicates that the effects of uncertainty need to be dissected into different levels of analysis to understand the conditions under which alternative modes of opportunity exploitation can be a prominent entrepreneurial alternative to new firm formation.

An informal community of practice : the case of the DEHub Virtual Worlds Working Group

The DEHub Virtual Worlds Working Group has an informal membership of nearly 200 members with an interest in education and virtual worlds within the Australian and New Zealand context. Members come from a variety of academic disciplines and may be teaching or research academics, Research Higher Degree candidates, project managers, virtual world builders and developers. The group acts as an informal Community of Practice, facilitating learning and the transfer of skills through social contact, opportunities to collaborate on projects and publications, and through the sharing of knowledge and experience. This poster provides a snapshot of the activity of this highly active group.

Factors influencing funding decisions by elected politicians at the state/provincial level : a case study of public libraries in Canada

The purpose of this study was to determine factors (internal and external) that influenced Canadian provincial (state) politicians when making funding decisions about public libraries. Using the case study methodology, Canadian provincial/state level funding for public libraries in the 2009-10 fiscal year was examined. After reviewing funding levels across the country, three jurisdictions were chosen for the case: British Columbia's budget revealed dramatically decreased funding, Alberta's budget showed dramatically increased funding, and Ontario's budget was unchanged from the previous year. The primary source of data for the case was a series of semi-structured interviews with elected officials and senior bureaucrats from the three jurisdictions. An examination of primary and secondary documents was also undertaken to help set the political and economic context as well as to provide triangulation for the case interviews. The data were analysed to determine whether Cialdini's theory of influence (2001) and specifically any of the six tactics of influence (i.e, commitment and consistency, authority, liking, social proof, scarcity and reciprocity) were instrumental in these budget processes. Findings show the principles of "authority", "consistency and commitment" and "liking" were relevant, and that "liking" were especially important to these decisions. When these decision makers were considering funding for public libraries, they most often used three distinct lenses: the consistency lens (what are my values? what would my party do?), the authority lens (is someone with hierarchical power telling me to do this? are the requests legitimate?), and most importantly, the liking lens (how much do I like and know about the requester?). These findings are consistent with Cialdini's theory, which suggests the quality of some relationships is one of six factors that can most influence a decision maker. The small number of prior research studies exploring the reasons for increases or decreases in public library funding allocation decisions have given little insight into the factors that motivate those politicians involved in the process and the variables that contribute to these decisions. No prior studies have examined the construct of influence in decision making about funding for Canadian public libraries at any level of government. Additionally, no prior studies have examined the construct of influence in decision making within the context of Canadian provincial politics. While many public libraries are facing difficult decisions in the face of uncertain funding futures, the ability of the sector to obtain favourable responses to requests for increases may require a less simplistic approach than previously thought. The ability to create meaningful connections with individuals in many communities and across all levels of government should be emphasised as a key factor in influencing funding decisions.

Linking scientific evidence and decision making : A case study of hand hygiene interventions

We consider how data from scientific research should be used for decision making in health services. Whether a hand hygiene intervention to reduce risk of nosocomial infection should be widely adopted is the case study. Improving hand hygiene has been described as the most important measure to prevent nosocomial infection. 1 Transmission of microorganisms is reduced, and fewer infections arise, which leads to a reduction in mortality2 and cost savings.3 Implementing a hand hygiene program is itself costly, so the extra investment should be tested for cost-effectiveness.4,5 The first part of our commentary is about cost-effectiveness models and how they inform decision making for health services. The second part is about how data on the effectiveness of hand hygiene programs arising from scientific studies are used, and 2 points are made: the threshold for statistical inference of .05 used to judge effectiveness studies is not important for decision making,6,7 and potentially valuable evidence about effectiveness might be excluded by decision makers because it is deemed low quality.8 The ideas put forward will help researchers and health services decision makers to appraise scientific evidence in a more powerful way.

A case for optimising fracture healing through inverse dynamization

The mechanical conditions in the repair tissues are known to influence the outcome of fracture healing. These mechanical conditions are determined by the stiffness of fixation and limb loading. Experimental studies have shown that there is a range of beneficial fixation stiffness for timely healing and that fixation stiffness that is either too flexible or too stiff impairs callus healing. However, much less is known about how mechanical conditions influence the biological processes that make up the sequence of bone repair and if indeed mechanical stimulation is required at all stages of repair. Secondary bone healing occurs through a sequence of events broadly characterised by inflammation, proliferation, consolidation and remodelling. It is our hypothesis that a change in fixation stiffness from very flexible to stiff can shorten the time to healing relative to constant fixation stiffness. Flexible fixation has the benefit of promoting greater callus formation and needs to be applied during the proliferative stage of repair. The greater callus size helps to stabilize the fragments earlier allowing mineralization to occur faster. Together with stable/rigid fixation applied during the latter stage of repair to ensure mineralization of the callus. The predicted benefits of inverse dynamization are shortened healing in comparison to very flexible fixation and healing time comparable or faster than stable fixation with greater callus stiffness.

Modelling, collaboration and integration : a case study for the delivery of public buildings

An evolution in the use of digital modelling has occurred in the Queensland Department of Public Works Division of Project Services over the last 20 years from: the initial implementation of computer aided design and documentation (CADD); to experimentation with building information modelling (BIM); to embedding integrated practice (IP); to current steps towards integrated project delivery (IPD) including the active involvement of consultants and contractors in the design/delivery process. This case study is one of three undertaken through the Australian Sustainable Built Environment National Research Centre investigating past R&D investment. The intent of these cases is to inform the development of policy guidelines for future investment in the construction industry in Australia. This research is informing the activities of CIB Task Group 85 R&D Investment and Impact. The uptake of digital modelling by Project Services has been approached through an incremental learning approach. This has been driven by a strong and clear vision with a focus on developing more efficient delivery mechanisms through the use of new technology coupled with process change. Findings reveal an organisational focus on several areas including: (i) strategic decision making including the empowerment of innovation leaders and champions; (ii) the acquisition and exploitation of knowledge; (iii) product and process development (with a focus on efficiency and productivity); (iv) organisational learning; (v) maximising the use of technology; and (vi) supply chain integration. Key elements of this approach include pilot projects, researcher engagement, industry partnerships and leadership.

Critical attributes of public-private partnerships : a case study in vocational education

The term ‘partnership’ is increasingly used by governments, industry, community organisations and schools in supporting their daily businesses. Similar to the terms ‘ICT’ and ‘learning’, ‘partnerships’ are now ubiquitous in policy discourse. Yet, the term remains ill-defined and ambiguous. This study reviews and reflects on a government led industry-school partnership initiative in the state of Queensland, Australia, to understand how the term is used in this initiative. Given the frequent use of Public Private Partnership (PPP) language, PPP was used as a framework to review this initiative. The methodology of this qualitative case study involved consultations with stakeholders and an analysis of Gateway schools documents, policy documents, and literature. The review suggests that despite the use of terminology akin to PPP projects in Gateway school and policy documents, the implicit suggestion that this initiative is a public-private partnership is untenable. The majority of principles shaping a PPP have not been considered to a significant extent in the Gateway project. Although the review recognises the legitimate and sincere purpose of the Gateway schools initiative, the adoption of a PPP framework during the design, monitoring, or evaluation stages could have strengthened the initiative in terms of outcomes, benefits, and sustainability.

Layered silicates in Chondritic Porous Aggregate W7029*A : a case of primary growth

An important subset of extraterrestrial particles that reach the Earth's stratosphere include the so-called Chondritic Porous Aggregates (CPA's) [1-3]. In general, CPA's have a fluffy morphology and consist of numerous (>104)subparticles that are often <100A in size [4]. Mineral species in CPA's include Mg-rich pyroxene and olivine, Fe- and (Fe,Ni)-sulphides, taenite, Fe,Ni-carbides, magnetite, Ti-metal, a Bi-phase (metal or oxide), and variable amounts of carbonaceous material [1, 5-7]. Hydrated silicates are rare in CPA's and are limited to aggregates that have not been severely altered (thermo-metamorphosed) during atmospheric entry [8]. The presence of hydrated silicates in one cosmic dust particle was established by X-ray diffraction [2] and has been inferred in others by infra-red spectroscopy [8]. If CPA's are cometary, their mineralogy and morphology suggest that at least two episodes of aggregation occurred and that variations in porosity may be related to local differences in ice-to-dust ratio [3].

Education for sustainability : a case study of pre-service primary teachers' knowledge and efficacy

This study investigated the relationships between knowledge and efficacy for teaching sustainability in a sample of 266 pre-service primary teachers at a large, metropolitan university in Australia. A survey gathered information about the participant’s attitudes and self-efficacy for education for sustainability, along with their perceived and actual knowledge of environmental sustainability issues. The participants typically believed they were confident in their abilities to engage with education for sustainability with self-efficacy increasing with increased levels of perceived knowledge. However no relationship was found between perceived knowledge and actual knowledge which suggests that the participants either do not feel constrained by their lack of knowledge, or are perhaps unaware of their actual knowledge of sustainability issues. This lack of relationship may have implications for the development of pedagogical content knowledge with pre-service teachers potentially developing shallow, tokenistic approaches to Education for Sustainability.

WebAIRS - A case study : how the multidisciplinarity of IS can save lives

This paper presents a case study chronicling the development of WebAIRS, an Australasian national anaesthetic incident reporting database for health care practitioners. WebAIRS is an example of the multidisciplinary nature of the IS discipline, incorporating IS theories, tools and principles in the creation of an IT artefact with significant real world application. This case study introduces the background of the project and the motivations for its conception including the need for critical incident reporting in anaesthesia, the process of its development using IT students and the problems identified following its national release among the anaesthetic community. The paper demonstrates the evolution of contemporary IS research and the IT artefact, and how each can be crucial foundations for hospitals of the future

Convergence of corporate social responsibility and corporate governance in weak economies : the case of Bangladesh

The convergence of corporate social responsibility (CSR) and corporate governance (CG) has changed the corporate accountability mechanism. This has developed a socially responsible ‘corporate self-regulation’, a synthesis of governance and responsibility in the companies of strong economies. However, unlike in the strong economies, this convergence has not been visible in the companies of weak economies, where the civil society groups are unorganised, regulatory agencies are either ineffective or corrupt and the media and non-governmental organisations do not mirror the corporate conscience. Using the case of Bangladesh, this article investigates the convergence between CSR and CG in the self-regulation of companies in a less vigilant environment.