The diversity of interests in environmental governance : a challenge for the rule of law

The function of environmental governance and the principle of the rule of law are both controversial and challenging. To apply the principle of the rule of law to the function of environmental governance is perhaps even more controversial and challenging. A system of environmental governance seeks to bring together the range of competitive and potentially conflicting interests in how the environment and its resources are managed. Increasingly it is the need for economic, social and ecological sustainability that brings these interests – both public and private – together. Then there is the relevance of the principle of the rule of law. Economic, social and ecological sustainability will be achieved – if at all – by a complex series of rules of law that are capable of enforcement so as to ensure compliance with them. To what extent do these rules of law reflect the principle of the rule of law? Is the principle of the rule of law the formally unstated value that is expected to underpin the legal system or is it the normative predicate that directs the legal system both vertically and horizontally? Is sustainability an aspirational value or a normative predicate according to which the environment and its resources are managed? Let us deal sequentially with these issues by reviewing a number of examples that demonstrate the relationship between environmental governance and the rule of law.

Feminist ethics and menopause : autonomy and decision-making in primary medical care

The construction of menopause as a long-term risk to health and the adoption of discourses of prevention has made necessary a decision by women about medical treatment; specifically regarding the use of hormone replacement therapy. In a study of general practitioners’ accounts of menopause and treatment in Australia, women's ‘choice’, ‘informed decision-making’ and ‘empowerment’ were key themes through which primary medical care for women at menopause was presented. These accounts create a position for women defined by the concept of individual choice and an ethic of autonomy. These data are a basis for theorising more generally in this paper. We critically examine the construct of ‘informed decision-making’ in relation to several approaches to ethics including bioethics and a range of feminist ethics. We identify the intensification of power relations produced by an ethic of autonomy and discuss the ways these considerations inform a feminist ethics of decision-making by women. We argue that an ‘ethic of autonomy’ and an ‘offer of choice’ in relation to health care for women at menopause, far from being emancipatory, serves to intensify power relations. The dichotomy of choice, to take or not to take hormone replacement therapy, is required to be a choice and is embedded in relations of power and bioethical discourse that construct meanings about what constitutes decision-making at menopause. The deployment of the principle of autonomy in medical practice limits decision-making by women precisely because it is detached from the construction of meaning and the self and makes invisible the relations of power of which it is a part.

Environmental pollution from shipbreaking industry : international law and national legal response

The international legal regime on shipbreaking is in its formative years. At the international level, the shipbreaking industry is partially governed by the Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal. However, how far this convention will be applicable for all aspects of transboundary movement of end-of-life ships is still, at least in the view of some scholars, a debatable issue. Against this backdrop, the International Maritime Organisation (IMO) has adopted a new, legally binding convention for shipbreaking. There is a rising voice from the developing countries that the convention is likely to impose more obligations on recycling facilities in the developing countries than on shipowners from rich nations. This may be identified as a clear derogation from the globally recognized international environmental law principle of common but differentiated treatment. This article will examine in detail major international conventions regulating transboundary movement and environmentally sound disposal of obsolete ships, as well as the corresponding laws of Bangladesh for implementing these conventions in the domestic arena. Moreover this article will examine in detail the recently adopted IMO Ship Recycling Convention.

Climate change and reduction of emissions of greenhouse gases from ships : an appraisal

Article 2(2) of the Kyoto Protocol imposes an obligation only on certain developed countries, working through the International Maritime Organisation (IMO), to pursue the reduction of greenhouse gas (GHG) emissions from marine bunker fuels. The IMO recently took the initiative to adopt a new legal instrument for the reduction of shipgenerated greenhouse gas emissions. Some developing countries have suggested that the proposed IMO initiative should strictly adhere to Article 2(2) of the Kyoto Protocol and the principle of Common but Differentiated Responsibility (CBDR). Against this backdrop, this article intends to review the extent to which it is possible to propose an international legal instrument for the reduction of GHG emissions from marine bunker fuels which is applicable only to ships from developed countries considering the complex characteristics of the international shipping industry. This article also examines how far this approach is justifiable even within the framework of the CBDR principle.

A social justice framework for safeguarding student learning engagement

The set of social justice principles and the Social Justice Framework (SJF), developed as resources for the sector as part of an Australian Government Office for Learning and Teaching project, adopt a recognitive approach to social justice and emphasise full participation and contribution within democratic society (Gale, 2000; Gale & Densmore, 2000). The SJF is contained within the major deliverable of the project, which is A Good Practice Guide for Safeguarding Student Learning Engagement (Nelson & Creagh, 2013) and is focused on good practice for activities that monitor student learning engagement and identify students at risk of disengaging in their first year. Examination of the social justice literature and its application to the higher education sector produced a set of five principles: Self-determination, Rights, Access, Equity and Participation. Each principle was defined and elucidated by a rationale and implications for practice, thus completing the SJF. The framework: reflects the notions of equity and social justice; provides a strategic approach for safeguarding engagement activities; and is supported by a suite of resources for practice and practitioners. The aim of this poster session is to engage in conversations about the SJF and how it might be applied to other types of student engagement activities critical to the first year of university life, such as orientation and transition programs, teamwork activities, peer programs and other academic support initiatives.

Studies of the off-field behaviours of sportspeople : are sponsors' objectives at risk?

The research reported here addresses the problem of athlete off-field behaviours as they influence sports’ sponsors, particularly the achievement of sponsorship objectives. The question arises because of incidents of sponsorship contract cancellation following news-media reporting of athletes’ off-field behaviours. Two studies are used to investigate the research question; the first establishes the content of news-media reports, and the second tests the effects of news’ reports on athlete, team and sponsor evaluations using an experimental design. Key assumptions of the research are that sponsorship objectives are principally consumer-based and mediated. Models of sponsorship argue that sponsors aim to reach and influence consumers through sponsees. Assuming this pathway exists is central to sponsorship activities. A corollary is that other mediators, in this case the news-media, may also communicate (uncontrollable) messages such that a consumer audience may be told of negative news that may then be associated with the sponsor. When sponsors cancel contracts it is assumed that their goal is to control the links between their brand and a negative referent. Balance theory is used to discuss the potential effects of negative off-field behaviours of athletes on sponsor’s objectives. Heider’s balance theory (1958) explains that individuals prefer to evaluate linked individuals or entities consistently. In the sponsorship context this presents the possibility that a negative evaluation of the athlete’s behaviour will contribute to correspondingly negative evaluations of the athlete’s team and sponsors. A content analysis (Study 1) was used to survey the types of athlete off-field behaviours commonly reported in a newspaper. In order to provide a local context for the research, articles from the Courier Mail were sampled and teams in the National Rugby League (NRL) competition were the focus of the research. The study identified nearly 2000 articles referring to the NRL competition; 258 of those refer to off-field incidents involving athletes. The various types of behaviours reported include assault, sexual assault allegations, driving under the influence of alcohol, illicit drug use, breaches of club rules, and positive off-field activities (i.e., charitable activities). An experiment (Study 2) tested three news’ article stimuli developed from the behaviours identified in Study 1 in a between-subjects design. A measure of Identification with the Team was used as a covariate variable in the Multivariate Analysis of Covariance analysis. Social identity theory suggests that when an individual identifies with a group, their attitudes and behaviours towards both in- and out-group members are modified. Use of Identification with the Team as a covariate acknowledges that respondents will evaluate behaviours differently according to the attribution of those behaviours to an in- or out-group member. Findings of the research suggest that the news’ article stimuli have significant, large effects on evaluations of athlete off-field behaviour and athlete Likability. Consistent with pretest results, charitable fundraising is regarded as extremely positive; the athlete, correspondingly, is likable. Assault is evaluated as extremely negative, and the athlete as unlikable. DUI scores reveal that the athlete’s behaviour is very negative; however, the athlete’s likability was evaluated as neutral. Treatment group does not produce any significant effects on team or sponsor variables. This research also finds that Identification with the Team has significant, large effects on team variables (Attitude toward the Brand and Corporate Image). Identification also has a significant large effect on athlete Likability, but not on Attitude toward the Act. Identification with the Team does not produce any significant effects on sponsor variables. The results of this research suggest that sponsor’s consumer-based objectives are not threatened by newspaper reports linking athlete off-field behaviour with their brand. Evaluations of sponsor variables (Attitude toward the Sponsor’s Brand and Corporate Image) were consistently positive. Variance in that data, however, cannot be attributed to experimental stimuli or Identification with the Team. These results argue that respondents may regard sponsorships, in principle, as good. Although it is good news for sponsors that negative evaluations of athletes will not produce correspondingly negative evaluations of consumer-based sponsorship objectives, the results indicate problems for sponsorship managers. The failure of Identification with the Team to explain sponsor variable variance indicates that the sponsor has not been evaluated as a linked entity in a relationship with the sporting team and athlete in this research. This result argues that the sponsee-mediated affective communication path that sponsors aim use to communicate with desirable publics is not necessarily a path available to them.

Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers

The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied as a transmitter, as a receiver or both. As a transmitter, it converts electrical energy to mechanical energy while a receiver converts mechanical energy to electrical energy as a sensor for control system. Once a piezoelectric transducer is excited by electrical signal, piezoelectric material starts to vibrate and generates ultrasound waves. A portion of the ultrasound waves which passes through the medium will be sensed by the receiver and converted to electrical energy. To drive an ultrasound transducer, an excitation signal should be properly designed otherwise undesired signal (low quality) can deteriorate the performance of the transducer (energy conversion) and increase power consumption in the system. For instance, some portion of generated power may be delivered in unwanted frequency which is not acceptable for some applications especially for biomedical applications. To achieve better performance of the transducer, along with the quality of the excitation signal, the characteristics of the high power ultrasound transducer should be taken into consideration as well. In this regard, several simulation and experimental tests are carried out in this research to model high power ultrasound transducers and systems. During these experiments, high power ultrasound transducers are excited by several excitation signals with different amplitudes and frequencies, using a network analyser, a signal generator, a high power amplifier and a multilevel converter. Also, to analyse the behaviour of the ultrasound system, the voltage ratio of the system is measured in different tests. The voltage across transmitter is measured as an input voltage then divided by the output voltage which is measured across receiver. The results of the transducer characteristics and the ultrasound system behaviour are discussed in chapter 4 and 5 of this thesis. Each piezoelectric transducer has several resonance frequencies in which its impedance has lower magnitude as compared to non-resonance frequencies. Among these resonance frequencies, just at one of those frequencies, the magnitude of the impedance is minimum. This resonance frequency is known as the main resonance frequency of the transducer. To attain higher efficiency and deliver more power to the ultrasound system, the transducer is usually excited at the main resonance frequency. Therefore, it is important to find out this frequency and other resonance frequencies. Hereof, a frequency detection method is proposed in this research which is discussed in chapter 2. An extended electrical model of the ultrasound transducer with multiple resonance frequencies consists of several RLC legs in parallel with a capacitor. Each RLC leg represents one of the resonance frequencies of the ultrasound transducer. At resonance frequency the inductor reactance and capacitor reactance cancel out each other and the resistor of this leg represents power conversion of the system at that frequency. This concept is shown in simulation and test results presented in chapter 4. To excite a high power ultrasound transducer, a high power signal is required. Multilevel converters are usually applied to generate a high power signal but the drawback of this signal is low quality in comparison with a sinusoidal signal. In some applications like ultrasound, it is extensively important to generate a high quality signal. Several control and modulation techniques are introduced in different papers to control the output voltage of the multilevel converters. One of those techniques is harmonic elimination technique. In this technique, switching angles are chosen in such way to reduce harmonic contents in the output side. It is undeniable that increasing the number of the switching angles results in more harmonic reduction. But to have more switching angles, more output voltage levels are required which increase the number of components and cost of the converter. To improve the quality of the output voltage signal with no more components, a new harmonic elimination technique is proposed in this research. Based on this new technique, more variables (DC voltage levels and switching angles) are chosen to eliminate more low order harmonics compared to conventional harmonic elimination techniques. In conventional harmonic elimination method, DC voltage levels are same and only switching angles are calculated to eliminate harmonics. Therefore, the number of eliminated harmonic is limited by the number of switching cycles. In the proposed modulation technique, the switching angles and the DC voltage levels are calculated off-line to eliminate more harmonics. Therefore, the DC voltage levels are not equal and should be regulated. To achieve this aim, a DC/DC converter is applied to adjust the DC link voltages with several capacitors. The effect of the new harmonic elimination technique on the output quality of several single phase multilevel converters is explained in chapter 3 and 6 of this thesis. According to the electrical model of high power ultrasound transducer, this device can be modelled as parallel combinations of RLC legs with a main capacitor. The impedance diagram of the transducer in frequency domain shows it has capacitive characteristics in almost all frequencies. Therefore, using a voltage source converter to drive a high power ultrasound transducer can create significant leakage current through the transducer. It happens due to significant voltage stress (dv/dt) across the transducer. To remedy this problem, LC filters are applied in some applications. For some applications such as ultrasound, using a LC filter can deteriorate the performance of the transducer by changing its characteristics and displacing the resonance frequency of the transducer. For such a case a current source converter could be a suitable choice to overcome this problem. In this regard, a current source converter is implemented and applied to excite the high power ultrasound transducer. To control the output current and voltage, a hysteresis control and unipolar modulation are used respectively. The results of this test are explained in chapter 7.

A density functional theory study on CO2 capture and activation by graphene-like boron nitride with boron vacancy

First principle calculations for a hexagonal (graphene-like) boron nitride (g-BN) monolayer sheet in the presence of a boron-atom vacancy show promising properties for capture and activation of carbon dioxide. CO2 is found to decompose to produce an oxygen molecule via an intermediate chemisorption state on the defect g-BN sheet. The three stationary states and two transition states in the reaction pathway are confirmed by minimum energy pathway search and frequency analysis. The values computed for the two energy barriers involved in this catalytic reaction after enthalpy correction indicate that the catalytic reaction should proceed readily at room temperature.

Adsorption of carbon dioxide and nitrogen on single-layer aluminum nitride nanostructures studied by density functional theory

The adsorption of carbon dioxide and nitrogen molecules on aluminum nitride (AlN) nanostructures has been explored using first-principle computational methods. Optimized configurations corresponding to physisorption and, subsequentially, chemisorption of CO2 are identified, in contrast to N2, for which only a physisorption structure is found. Transition-state searches imply a low energy barrier between the physisorption and chemisorption states for CO2 such that the latter is accessible and thermodynamically favored at room temperature. The effective binding energy of the optimized chemisorption structure is apparently larger than those for other CO2 adsorptive materials, suggesting the potential for application of aluminum nitride nanostructures for carbon dioxide capture and storage.

Cometary evolution : clues on physical properties from chondritic interplanetary dust particles

The degree of diversity or similarity detected in comets depends primarily on the lifetimes of the individual cometary nuclei at the time of analysis. It is inherent in our understanding of cometary orbital dynamics and the seminal model of comet origins that cometary evolution is the natural order of events in our Solar System. Thus, predictions of cometary behaviour in terms of bulk physical, mineralogical or chemical parameters should contain an appreciation of temporal variation(s). Previously, Rietmeijer and Mackinnon [1987] developed mineralogical bases for the chemical evolution of cometary nuclei primarily with regard to the predominantly silicate fraction of comet nuclei. We suggested that alteration of solids in cometary nuclei should be expected and that indications of likely reactants and products can be derived from judicious comparison with terrestrial diagenetic environments which include hydrocryogenic and low-temperature aqueous alterations. In a further development of this concept, Rietmeijer [1988] provides indirect evidence for the formation of sulfides and oxides in comet nuclei. Furthermore, Rietmeijer [1988] noted that timescales for hydrocryogenic and low-temperature reactions involving liquid water are probably adequate for relatively mature comets, e.g. P/comet Halley. In this paper, we will address the evolution of comet nuclei physical parameters such as solid particle grain size, porosity and density. In natural environments, chemical evolution (e.g. mineral reactions) is often accompanied by changes in physical properties. These concurrent changes are well-documented in the terrestrial geological literature, especially in studies of sediment diagenesis and we suggest that similar basic principles apply within the upper few meters of active comet nuclei. The database for prediction of comet nuclei physical parameters is, in principle, the same as used for the proposition of chemical evolution. We use detailed mineralogical studies of chondritic interplanetary dust particles (IDPS) as a guide to the likely constitution of mature comets traversing the inner Solar System. While there is, as yet, no direct proof that a specific sub-group or type of chondritic IDP is derived from a specific comet, it is clear that these particles are extraterrestrial in origin and that a certain portion of the interplanetary flux received by the Earth is cometary in origin. Two chondritic porous (CP) IDPS, sample numbers W701OA2 and W7029CI, from the Johnson Space Center Cosmic Dust Collection have been selected for this study of putative cometary physical parameters. This particular type of particle is considered a likely candidate for a cometary origin on the basis of mineralogy, bulk composition and morphology. While many IDPs have been subjected to intensive study over the past decade, we can develop a physical parameter model on only these two CP IDPs because few others have been studied in sufficient detail.

Assessing the suitability of existing spatial data for disaster planning and mitigation in Queensland

The Council of Australian Governments (COAG) in 2003 gave in-principle approval to a best-practice report recommending a holistic approach to managing natural disasters in Australia incorporating a move from a traditional response-centric approach to a greater focus on mitigation, recovery and resilience with community well-being at the core. Since that time, there have been a range of complementary developments that have supported the COAG recommended approach. Developments have been administrative, legislative and technological, both, in reaction to the COAG initiative and resulting from regular natural disasters. This paper reviews the characteristics of the spatial data that is becoming increasingly available at Federal, state and regional jurisdictions with respect to their being fit for the purpose for disaster planning and mitigation and strengthening community resilience. In particular, Queensland foundation spatial data, which is increasingly accessible by the public under the provisions of the Right to Information Act 2009, Information Privacy Act 2009, and recent open data reform initiatives are evaluated. The Fitzroy River catchment and floodplain is used as a case study for the review undertaken. The catchment covers an area of 142,545 km2, the largest river catchment flowing to the eastern coast of Australia. The Fitzroy River basin experienced extensive flooding during the 2010–2011 Queensland floods. The basin is an area of important economic, environmental and heritage values and contains significant infrastructure critical for the mining and agricultural sectors, the two most important economic sectors for Queensland State. Consequently, the spatial datasets for this area play a critical role in disaster management and for protecting critical infrastructure essential for economic and community well-being. The foundation spatial datasets are assessed for disaster planning and mitigation purposes using data quality indicators such as resolution, accuracy, integrity, validity and audit trail.

Automated marine mammal detection from aerial imagery

This paper presents two algorithms to automate the detection of marine species in aerial imagery. An algorithm from an initial pilot study is presented in which morphology operations and colour analysis formed the basis of its working principle. A second approach is presented in which saturation channel and histogram-based shape profiling were used. We report on performance for both algorithms using datasets collected from an unmanned aerial system at an altitude of 1000 ft. Early results have demonstrated recall values of 48.57% and 51.4%, and precision values of 4.01% and 4.97%.

Molecular dynamics simulation of fracture strength and morphology of defective graphene

Different types of defects can be introduced into graphene during material synthesis, and significantly influence the properties of graphene. In this work, we investigated the effects of structural defects, edge functionalisation and reconstruction on the fracture strength and morphology of graphene by molecular dynamics simulations. The minimum energy path analysis was conducted to investigate the formation of Stone-Wales defects. We also employed out-of-plane perturbation and energy minimization principle to study the possible morphology of graphene nanoribbons with edge-termination. Our numerical results show that the fracture strength of graphene is dependent on defects and environmental temperature. However, pre-existing defects may be healed, resulting in strength recovery. Edge functionalization can induce compressive stress and ripples in the edge areas of graphene nanoribbons. On the other hand, edge reconstruction contributed to the tensile stress and curved shape in the graphene nanoribbons.

Modelling the information seeking user by the decision they make

The article focuses on how the information seeker makes decisions about relevance. It will employ a novel decision theory based on quantum probabilities. This direction derives from mounting research within the field of cognitive science showing that decision theory based on quantum probabilities is superior to modelling human judgements than standard probability models [2, 1]. By quantum probabilities, we mean decision event space is modelled as vector space rather than the usual Boolean algebra of sets. In this way,incompatible perspectives around a decision can be modelled leading to an interference term which modifies the law of total probability. The interference term is crucial in modifying the probability judgements made by current probabilistic systems so they align better with human judgement. The goal of this article is thus to model the information seeker user as a decision maker. For this purpose, signal detection models will be sketched which are in principle applicable in a wide variety of information seeking scenarios.

Displacement motion prediction of a landing deck for recovery operations of rotary UAVs

This paper proposes a practical prediction procedure for vertical displacement of a Rotarywing Unmanned Aerial Vehicle (RUAV) landing deck in the presence of stochastic sea state disturbances. A proper time series model tending to capture characteristics of the dynamic relationship between an observer and a landing deck is constructed, with model orders determined by a novel principle based on Bayes Information Criterion (BIC) and coefficients identified using the Forgetting Factor Recursive Least Square (FFRLS) method. In addition, a fast-converging online multi-step predictor is developed, which can be implemented more rapidly than the Auto-Regressive (AR) predictor as it requires less memory allocations when updating coefficients. Simulation results demonstrate that the proposed prediction approach exhibits satisfactory prediction performance, making it suitable for integration into ship-helicopter approach and landing guidance systems in consideration of computational capacity of the flight computer.