Função afim e suas propriedades através da resolução de problemas

Pós-graduação em Matemática em Rede Nacional - IBILCE

Verificação de pilares metálicos compostos constituídos por perfis formados a frio por meio de programa computacional

In this work, we discuss the procedures adopted for the design of built-up columns (laced and battened columns). Built-up columns are widely used in steel construction generally when the compression forces are relatively low and the column buckling lengths are large. They are commonly used in industrial buildings, for example, as posts for cladding, or as columns supporting a crane girder. Unlike columns with full section, in the case of built-up columns, it is necessary to evaluate the shear stiffness. In fact, the shear strength leads to a significant reduction of the critical load. In the context of this work, the components of the columns (chords, diagonals, posts, etc.) are formed by cold-formed members. In order to systematize and rationalize the verification of the built-up columns, this work aim to develop a computer program based on the standards NBR 14762, NBR 6355 and Eurocode 3, basically the considerations of the part EN 1993-1-1

Verificação de pilares metálicos compostos constituídos por perfis formados a frio por meio de programa computacional

In this work, we discuss the procedures adopted for the design of built-up columns (laced and battened columns). Built-up columns are widely used in steel construction generally when the compression forces are relatively low and the column buckling lengths are large. They are commonly used in industrial buildings, for example, as posts for cladding, or as columns supporting a crane girder. Unlike columns with full section, in the case of built-up columns, it is necessary to evaluate the shear stiffness. In fact, the shear strength leads to a significant reduction of the critical load. In the context of this work, the components of the columns (chords, diagonals, posts, etc.) are formed by cold-formed members. In order to systematize and rationalize the verification of the built-up columns, this work aim to develop a computer program based on the standards NBR 14762, NBR 6355 and Eurocode 3, basically the considerations of the part EN 1993-1-1

Pollen and seed flow patterns of Carapa guianensis Aublet. (Meliaceae) in two types of Amazonian forest

Various factors affect spatial genetic structure in plant populations, including adult density and primary and secondary seed dispersal mechanisms. We evaluated pollen and seed dispersal distances and spatial genetic structure of Carapa guianensis Aublet. (Meliaceae) in occasionally inundated and terra firme forest environments that differed in tree densities and secondary seed dispersal agents. We used parentage analysis to obtain contemporary gene flow estimates and assessed the spatial genetic structure of adults and juveniles. Despite the higher density of adults (diameter at breast height >= 25 cm) and spatial aggregation in occasionally inundated forest, the average pollen dispersal distance was similar in both types of forest (195 +/- 106 m in terra firme and 175 +/- 87 m in occasionally inundated plots). Higher seed flow rates (36.7% of juveniles were from outside the plot) and distances (155 +/- 84 m) were found in terra firme compared to the occasionally inundated plot (25.4% and 114 +/- 69 m). There was a weak spatial genetic structure in juveniles and in terra firme adults. These results indicate that inundation may not have had a significant role in seed dispersal in the occasionally inundated plot, probably because of the higher levels of seedling mortality.

Análise das distorções em leituras angulares de imagens fotográficas

CONTEXTUALIZAÇÃO: A biofotogrametria é uma técnica difundida na área da saúde e, apesar dos cuidados metodológicos, há distorções nas leituras angulares das imagens fotográficas. OBJETIVO: Mensurar o erro das medidas angulares em imagens fotográficas com diferentes resoluções digitais em um objeto com ângulos pré-demarcados. MÉTODOS: Utilizou-se uma esfera de borracha com 52 cm de circunferência. O objeto foi previamente demarcado com ângulos de 10º, 30º, 60º e 90º, e os registros fotográficos foram realizados com o eixo focal da câmera a três metros de distância e perpendicular ao objeto, sem utilização de zoom óptico e com resolução de 3, 5 e 10 Megapixels (Mp). Todos os registros fotográficos foram armazenados, e os valores angulares foram analisados por um experimentador previamente treinado, utilizando o programa ImageJ. As aferições das medidas foram realizadas duas vezes, com intervalo de 15 dias entre elas. Posteriormente, foram calculados os valores de acurácia, erro relativo e em graus, precisão e Coeficiente de Correlação Intraclasse (ICC). RESULTADOS: Quando analisado o ângulo de 10º, a média da acurácia das medidas foi maior para os registros com resolução de 3 Mp em relação às resoluções de 5 e 10 Mp. O ICC foi considerado excelente para as três resoluções de imagem analisadas e, em relação aos ângulos analisados nos registros fotográficos, pôde-se verificar maior acurácia, menor erro relativo e em graus e maior precisão para o ângulo de 90º, independentemente da resolução da imagem. CONCLUSÃO: Os registros fotográficos realizados com a resolução de 3 Mp proporcionaram medidas de maiores valores de acurácia e precisão e menores valores de erro, sugerindo ser a resolução mais adequada para gerar imagem de ângulos de 10º e 30º.

A NEW AND THREATENED INSULAR SPECIES OF LANCEHEAD FROM SOUTHEASTERN BRAZIL

We describe a new species of Bothrops from Vitoria Island, off the coast of Sao Paulo, southeastern Brazil. The new species differs from the mainland coastal populations of B. jararaca mostly in its smaller and stouter body, number and form of scales, and hemipenial morphology. From B. insularis and B. alcatraz, both related species endemic to islands in southeastern Brazil, B. otavioi sp. nov. differs mainly in its body form and number of scales. The new species has the twist common mitochondrial haplotype for mainland populations of B. jararaca, which is also found in B. alcatraz. A mitochondrial genealogy (gene tree) shows the new species nested within the northern clade of B. jararaca. This genealogical pattern can be explained by a recent speciation event for B. otavioi sp. nov. The isolation of insular species of Bothrops from continental ancestor populations are probably related to the same vicariant process, the oscillations of sea level during the Pleistocene. The new species feeds on small hylid frogs, and attains sexual maturity at 388 mm snout-vent length (SVL; males) and 692 mm SVL (females). Bothrops facial sp. nov. is endemic to Vitoria Island, and should be listed as critically endangered because it is known from only a single area (an island), its geographic range covers less than 100 km(2), and there is a projected continuing decline in the quality of its habitat because of increasing human settlement.

Vitamin D receptor polymorphisms in hypertensive disorders of pregnancy

Hypertension is the most common medical disorder in pregnancy, and a leading cause of maternal and neonatal morbidity and mortality. Vitamin D endocrine system has important influence on immune modulation and endothelial function, which play a role in preeclampsia (PE) and gestational hypertension (GH). Vitamin D receptor (VDR) is present in a large variety of cell types, including placental cells. We examined whether there is an association between VDR polymorphisms (FokI, ApaI and BsmI) with PE or with GH. Restriction fragment length polymorphism techniques were used to genotype 529 pregnant (154 with GH, 162 with PE, and 213 healthy pregnant-HP). VDR haplotype frequencies were inferred using the PHASE 2.1 program. We found similar genotype distributions for the three VDR polymorphisms in both PE and GH groups compared with the HP group (all P > 0.05). In parallel with these findings, the VDR haplotype frequency distribution was similar in both PE and GH groups compared with the HP group (all P > 0.05). Our results showing no significant association between VDR polymorphisms or haplotypes with PE or GH suggest that genetic variations in VDR do not predispose to hypertensive disorders of pregnancy.

Maternal iNOS genetic polymorphisms and hypertensive disorders of pregnancy

Increased expression and activity of inducible nitric oxide synthase (iNOS) may contribute to the pathogenesis of pre-eclampsia (PE) and gestational hypertension (GH). However, no previous study has examined whether genetic polymorphisms in the iNOS gene are associated with PE or GH. We examined whether two functional, clinically relevant iNOS genetic polymorphisms (the C(-1026)A polymorphism, rs2779249, in the promoter region, and the G2087A polymorphism, rs2297518, in exon 16) are associated with GH or with PE. We studied 565 pregnant women: 212 healthy pregnant (HP), 166 pregnant with GH and 187 pregnant with PE. Genotypes were determined by real-time PCR, using the Taqman allele discrimination assay. The PHASE 2.1 program was used to estimate haplotype distributions in the three study groups. We found no significant association between the C(-1026)A polymorphism and PE or GH (P>0.05). However, we found the GA genotype and the A allele for the G2087A polymorphism at higher frequency in PE, but not in GH, compared with HP (P<0.05). The haplotype analysis showed no significant intergroup differences (P>0.05). These findings suggest that iNOS genetic variants may affect the susceptibility to PE, but not to GH. Journal of Human Hypertension (2012) 26, 547-552; doi:10.1038/jhh.2011.65; published online 30 June 2011

Contribuição da inclusão de polpa cítrica e casca de soja para a qualidade da silagem de resíduo úmido de cervejaria

Com o objetivo de avaliar a produção da silagem e o uso de aditivos no processo de ensilagem do resíduo úmido de cervejaria, foram realizados 5 tratamentos: controle (C: ensilagem de 100% de resíduo úmido de cervejaria); PC15 (15% de polpa cítrica); PC30 (30% de polpa cítrica); CS15 (15% de casca de soja); CS30 (30% de casca de soja) – com base na matéria fresca do resíduo de cervejaria. As silagens foram confeccionadas em baldes plásticos com 252mm de altura e 245mm de diâmetro (0,06174m³), e amostras foram coletadas para análises bromatológicas, pH, nitrogênio amoniacal, digestão in vitro de matéria seca, ácidos orgânicos e perfil microbiológico. Os resultados foram analisados pelo programa computacional Statistical Analysis System (Statistical..., 1985), sendo verificada a normalidade dos resíduos pelo Teste de Shapiro-Wilk (PROC UNIVARIATE), e as variâncias, pelo Teste de Hartley. Os efeitos dos níveis de adição foram separados por meio de contrastes polinomiais utilizando o nível de significância de 5%. Houve aumento do teor de matéria seca, carboidratos solúveis, ácido lático, digestão in vitro de matéria seca, da população de bactérias ácido láticas e redução do pH, ácido butírico, propiônico e nitrogênio amoniacal a partir das inclusões de polpa cítrica e casca de soja, sendo os melhores resultados encontrados para o tratamento com inclusão de 30% de polpa cítrica (P<0,05). A ensilagem do bagaço de malte por si só é uma alternativa para o produtor rural como suporte alimentar e confecção de silagem de qualidade que pode ser incrementada com o uso de aditivos a serem avaliados de acordo com a relação custo-benefício para eficiência da produção

Aplicación para la configuración automática del certificado digital en un ordenador personal

[ES] Programa de escritorio compatible con sistemas operativos Windows 7 y Windows 8.1. El programa configura el ordenador personal del usuario de modo que la firma electrónica de la Universidad de Las Palmas de Gran Canaria funcione correctamente en los navegadores web elegidos por el usuario. Al iniciarse la aplicación, el usuario elige dichos navegadores. El programa incorpora dos modos de instalación. La primera forma es la instalación automática, todos los componentes requeridos, que no estén instalados en el equipo, se instalarán automáticamente con una mínima intervención del usuario. La segunda forma es la instalación personalizada, se muestra una lista de los componentes requeridos y el usuario puede instalar de forma individual cada uno de éstos, si no están ya instalados. El programa también puede desinstalar los cambios realizados en el equipo, también incorpora dos formas de realizar esta operación. De forma automática, todos los componentes instalados por el programa serán desinstalados con una mínima intervención del usuario. De forma personalizada, el usuario podrá elegir el componente que se desinstala de forma individual. Siempre teniendo en cuenta que los cambios que se deshacen, son cambios realizados por el propio configurador. El programa también es capaz de analizar si un equipo cumple o no los requerimientos para que funcione correctamente la firma electrónica en su ordenador. Para analizar un equipo no se instala ningún componente. Se requiere acceso a Internet para usar este programa ya que se descargan diferentes archivos desde el servidor de la Universidad de Las Palmas de Gran Canaria.

Kinematics of fibrous aggregates

This thesis reports on a research into the progressive development of fibrous aggregates, e.g. calcite, quartz and mica crystals in veins and strain fringes. The study is based on microstructural analysis of natural examples and on computer experiments. Investigation of fibrous looking elongate crystals in striped bedding-veins from the Orobic Alps, Italy indicate that these crystals do not track the opening trajectory of the veins but are oriented at an angle of up to 80° to the opening direction. Microstructural analysis of quartz, calcite and chlorite fibres in antitaxial strain fringes indicate that most strain fringes contain complex intergrowth of tracking (displacement-controlled) and non-tracking (face-controlled) fibres. To explain these growth features the computer program

Zur systematischen Relevanz von Juglandaceen-Blättern unter besonderer Berücksichtigung fossiler Funde aus der Grube Messel und dem Eckfelder Maar

In der vorliegenden Arbeit wurden die Blattmerkmale der Juglandaceen auf ihre systematische Verwertbarkeit hin untersucht. Ein Datensatz mit 62 Blattmerkmalen von 48 rezenten Juglandaceen-Arten wurde zusammengetragen. Zusätzlich wurden vier fossile Blattformen erfasst. Die fossilen Blätter stammen aus zwei Fundstätten des deutschen Eozäns. Der Datensatz wurde mit dem Computerprogramm MacClade® auf ein Phylogramm aus Manos und Stone (2001) übertragen (‚character mapping’). Zusätzlich wurde eine Hauptkomponentenanalyse mit dem Computerprogramm PAST® durchgeführt. Die meisten taxonomischen Einheiten der Juglandaceen konnten mithilfe des ‚character mapping’ wiedererkannt werden, die dafür verantwortlichen Blattmerkmale haben somit ihre systematische Signifikanz unter Beweis gestellt. Weiterhin konnte eine Evolutionstendenz des Induments belegt werden. Zwischen den ursprünglichen und den abgeleiteten Juglandaceen-Taxa ist eine zunehmende Differenzierung des Induments zu beobachten. Die fossilen Blattformen bildeten in der Hauptkomponentenanalyse eine eindeutig erkennbare Gruppierung, die von allen rezenten Taxa der Analyse separiert ist. Demnach lassen sie sich nicht durch einen Vergleich mit rezenten Blättern systematisch zuordnen. Die fossilen Blattformen der Juglandaceen bestätigen die hier belegte Evolutions-tendenz des Induments. Sie stehen mit ihren ursprünglichen Indumentstrukturen am Ausgangspunkt der Indumentevolution.

Elaborazione di un algoritmo di pianificazione di ricostruzioni del cavo orale, dell'orofaringe, della mandibola.

1.Ricostruzione mandibolare La ricostruzione mandibolare è comunemente eseguita utilizzando un lembo libero perone. Il metodo convenzionale (indiretto) di Computer Aided Design e Computer Aided Manifacturing prevede il modellamento manuale preoperatorio di una placca di osteosintesi standard su un modello stereolitografico della mandibola. Un metodo innovativo CAD CAM diretto comprende 3 fasi: 1) pianificazione virtuale 2) computer aided design della dima di taglio mandibolari, della dima di taglio del perone e della placca di osteosintesi e 3) Computer Aided Manufacturing dei 3 dispositivi chirurgici personalizzati. 7 ricostruzioni mandibolari sono state effettuate con il metodo diretto. I risultati raggiunti e le modalità di pianificazione sono descritte e discusse. La progettazione assistita da computer e la tecnica di fabbricazione assistita da computer facilita un'accurata ricostruzione mandibolare ed apporta un miglioramento statisticamente significativo rispetto al metodo convenzionale. 2. Cavità orale e orofaringe Un metodo ricostruttivo standard per la cavità orale e l'orofaringe viene descritto. 163 pazienti affetti da cancro della cavità orale e dell'orofaringe, sono stati trattati dal 1992 al 2012 eseguendo un totale di 175 lembi liberi. La strategia chirurgica è descritta in termini di scelta del lembo, modellamento ed insetting. I modelli bidimensionali sono utilizzati per pianificare una ricostruzione tridimensionale con il miglior risultato funzionale ed estetico. I modelli, la scelta del lembo e l' insetting sono descritti per ogni regione. Complicazioni e risultati funzionali sono stati valutati sistematicamente. I risultati hanno mostrato un buon recupero funzionale con le tecniche ricostruttive descritte. Viene proposto un algoritmo ricostruttivo basato su template standard.

Portare la tecnologia in cabina: le nuove tecnologie a servizio dell'interprete e il caso della simultanea con testo

The digital revolution has affected all aspects of human life, and interpreting is no exception. This study will provide an overview of the technology tools available to the interpreter, but it will focus more on simultaneous interpretation, particularly on the “simultaneous interpretation with text” method. The decision to analyse this particular method arose after a two-day experience at the Court of Justice of the European Union (CJEU), during research for my previous Master’s dissertation. During those days, I noticed that interpreters were using "simultaneous interpretation with text" on a daily basis. Owing to the efforts and processes this method entails, this dissertation will aim at discovering whether technology can help interpreters, and if so, how. The first part of the study will describe the “simultaneous with text” approach, and how it is used at the CJEU; the data provided by a survey for professional interpreters will describe its use in other interpreting situations. The study will then describe Computer-Assisted Language Learning technologies (CALL) and technologies for interpreters. The second part of the study will focus on the interpreting booth, which represents the first application of the technology in the interpreting field, as well as on the technologies that can be used inside the booth: programs, tablets and apps. The dissertation will then analyse the programs which might best help the interpreter in "simultaneous with text" mode, before providing some proposals for further software upgrades. In order to give a practical description of the possible upgrades, the domain of “judicial cooperation in criminal matters” will be taken as an example. Finally, after a brief overview of other applications of technology in the interpreting field (i.e. videoconferencing, remote interpreting), the conclusions will summarize the results provided by the study and offer some final reflections on the teaching of interpreting.

A multilingual audiometer simulator software for training purposes

A set of algorithms, which allows a computer to determine the answers of simulated patients during pure tone and speech audiometry, is presented. Based on these algorithms, a computer program for training in audiometry was written and found to be useful for teaching purposes.