Controle automático para injeção otimizada de gás em poços de petróleo equipados para funcionamento com gás lift contínuo

The continuous gas lift method is the main artificial lifting method used in the oil industry for submarine wells, due to its robustness and the large range of flow rate that the well might operate. Nowadays, there is a huge amount of wells producing under this mechanism. This method of elevation has a slow dynamics due to the transients and a correlation between the injected gas rate and the of produced oil rate. Electronics controllers have been used to adjust many parameters of the oil wells and also to improve the efficiency of the gas lift injection system. This paper presents a intelligent control system applied to continuous gas injection in wells, based in production s rules, that has the target of keeping the wells producing during the maximum period of time, in its best operational condition, and doing automatically all necessary adjustments when occurs some disturbance in the system. The author also describes the application of the intelligent control system as a tool to control the flow pressure in the botton of the well (Pwf). In this case, the control system actuates in the surface control valve

Utilização da lógica difusa no controle inteligente de sistemas eletro-hidráulicos

Electro-hydraulic servo-systems are widely employed in industrial applications such as robotic manipulators, active suspensions, precision machine tools and aerospace systems. They provide many advantages over electric motors, including high force to weight ratio, fast response time and compact size. However, precise control of electro-hydraulic systems, due to their inherent nonlinear characteristics, cannot be easily obtained with conventional linear controllers. Most flow control valves can also exhibit some hard nonlinearities such as deadzone due to valve spool overlap on the passage´s orifice of the fluid. This work describes the development of a nonlinear controller based on the feedback linearization method and including a fuzzy compensation scheme for an electro-hydraulic actuated system with unknown dead-band. Numerical results are presented in order to demonstrate the control system performance

Modelagem dinâmica do escoamento de um sistema de elevação por plunger lift

A critical problem in mature gas wells is the liquid loading. As the reservoir pressure decreases, gas superficial velocities decreases and the drag exerted on the liquid phase may become insufficient to bring all the liquid to the surface. Liquid starts to drain downward, flooding the well and increasing the backpressure which decreases the gas superficial velocity and so on. A popular method to remedy this problem is the Plunger Lift. This method consists of dropping the "plunger"to the bottom of the tubing well with the main production valve closed. When the plunger reaches the well bottom the production valve is opened and the plunger carry the liquid to the surface. However, models presented in literature for predicting the behavior in plunger lift are simplistic, in many cases static (not considering the transient effects). Therefore work presents the development and validation of a numerical algorithm to solve one-dimensional compressible in gas wells using the Finite Volume Method and PRIME techniques for treating coupling of pressure and velocity fields. The code will be then used to develop a dynamic model for the plunger lift which includes the transient compressible flow within the well

Controle feedback de nível baseado em sensor de imagem aplicado ao equipamento misturador-decantador à inversão de fases (MDIF®)

The treatment of wastewaters contaminated with oil is of great practical interest and it is fundamental in environmental issues. A relevant process, which has been studied on continuous treatment of contaminated water with oil, is the equipment denominated MDIF® (a mixer-settler based on phase inversion). An important variable during the operation of MDIF® is the water-solvent interface level in the separation section. The control of this level is essential both to avoid the dragging of the solvent during the water removal and improve the extraction efficiency of the oil by the solvent. The measurement of oil-water interface level (in line) is still a hard task. There are few sensors able to measure oil-water interface level in a reliable way. In the case of lab scale systems, there are no interface sensors with compatible dimensions. The objective of this work was to implement a level control system to the organic solvent/water interface level on the equipment MDIF®. The detection of the interface level is based on the acquisition and treatment of images obtained dynamically through a standard camera (webcam). The control strategy was developed to operate in feedback mode, where the level measure obtained by image detection is compared to the desired level and an action is taken on a control valve according to an implemented PID law. A control and data acquisition program was developed in Fortran to accomplish the following tasks: image acquisition; water-solvent interface identification; to perform decisions and send control signals; and to record data in files. Some experimental runs in open-loop were carried out using the MDIF® and random pulse disturbances were applied on the input variable (water outlet flow). The responses of interface level permitted the process identification by transfer models. From these models, the parameters for a PID controller were tuned by direct synthesis and tests in closed-loop were performed. Preliminary results for the feedback loop demonstrated that the sensor and the control strategy developed in this work were suitable for the control of organic solvent-water interface level

Anticoagulação oral em portadores de próteses valvares cardíacas mecânicas: experiência de dez anos

INTRODUÇÃO: Dados da literatura sugerem que as taxas de tromboembolismo e sangramento em pacientes com próteses valvares cardíacas mecânicas podem ser muito reduzidas se a terapia anticoagulante for otimizada. OBJETIVOS: Avaliar a ocorrência de complicações em portadores de próteses valvares cardíacas mecânicas submetidos à terapêutica anticoagulante, otimizada por meio de ambulatório especializado. MÉTODOS: Estudou-se a ocorrência de complicações ao longo de 10 anos em 261 pacientes com próteses valvares cardíacas mecânicas, anticoagulados e acompanhados em ambulatório especializado. Esses pacientes foram divididos em dois grupos conforme porcentual de consultas com tempo de protrombina (RNI) dentro do intervalo desejado: G1-0% a 50,00% e G2-50,01% a 100% das consultas. Foram avaliadas as ocorrências de complicações tromboembólicas e hemorrágicas na sua totalidade, ou subdivididas em maiores e menores, de acordo com a gravidade. Os resultados estão apresentados sob forma de estudo atuarial e de frequência linearizada de ocorrência de eventos. RESULTADOS: O estudo atuarial mostrou que, ao longo do tempo, no grupo G2 (com 50,01% a 100% das consultas com a RNI no intervalo desejado) maior número de pacientes esteve livre da ocorrência de qualquer tipo de evento, de eventos hemorrágicos menores ou da elevação exacerbada da RNI. As frequências linearizadas de ocorrência, em todos os tipos eventos, também foram menores nos pacientes do grupo G2. CONCLUSÕES: O tempo de permanência dentro do intervalo de anticoagulação desejado está diretamente relacionado com a ocorrência de complicações. Entretanto, mesmo com acompanhamento otimizado por meio de ambulatório especializado, apenas cerca de um terço dos pacientes apresentaram nível de anticoagulação adequado em mais da metade das consultas.

Dysautonomia and ventricular dysfunction in the indeterminate form of Chagas disease

Background: the associations between autonomic function and biventricular function in patients with the indeterminate form of Chagas disease remains to be elucidated.Methods: In 42 asymptornatic patients and 19 healthy volunteers, the autonomic function was assessed by time domain indices of heart rate variability (HRV), analyzed for 24 h; the right ventricular function was assessed by fraction area change, right ventricle shortening, and systolic excursion of the tricuspid valve; and the left ventricular function was assessed by ejection fraction and transmittal flow velocities. Data were expressed as mean SD or medians (including the lower quartile and upper quartile). Groups were compared by Student's t or Mann-Whitney U test. Autonomic and ventricular function were correlated by Pearson's or Spearman's correlation coefficient. The level of significance was 5%.Results: Right and left ventricular systolic function indexes were comparable between groups. Transmittal flow velocities were decreased in the Chagas disease group (p < 0.05). The patients presented impaired HRV as indicated by the values of SDNN-day (80 (64-99) ms vs. 98 (78-127) ms; p = 0.045), SDNNI-24 It (54 (43-71) vs. 65 (54-105) ms; p = 0.027), SDNNI-day (49 (42-64) vs. 67 (48-76) ms; p = 0.045), pNN50-day (2.2 (0.7-5)% vs. 10 (3-11)%; p = 0.033); and pNN50-24 It (3 (1-7)% vs. 12 (8-19)%; p = 0.013). There were no correlations between the left ventricular diastolic indices and autonomic dysfunctional indices (p > 0.05).Conclusion: Patients with the indeterminate form of Chagas disease have both dysautonomia, and left ventricular diastolic dysfunction. However, the right ventricular function is preserved. Importantly, ventricular diastolic dysfunction and dysautonomia. are independent phenomena. (c) 2005 Elsevier B.V.. All rights reserved.

Prevalence and predictors of ventricular remodeling after anterior myocardial infarction in the era of modern medical therapy

Background: The consequences of aggressive therapy following a myocardial infarction (MI) on ventricular remodeling are not well established. Thus, the objective of this study was to analyze the prevalence, clinical characteristics, and predictors of left ventricular remodeling in the era of modern medical therapy.Material/Methods: Clinical characteristics and echocardiographic data were analyzed in 66 consecutive patients with anterior infarction at admission and at 6-month follow-up. Ventricular remodeling was defined as an increase of 10% in ventricular end-systolic or end-diastolic diameter.Results: In our study, 58% of patients presented with ventricular remodeling. Patients with remodeling possessed higher total plasma creatine kinase (CPK), MB-fraction (CPK-MB), heart rate, heart failure, shortness of breath, and reperfusion therapy than patients without remodeling. In contrast, patients with remodeling had a smaller ejection fraction, E-Wave deceleration time (EDT), and early (E' Wave) and late (A' Wave) diastolic mitral annulus velocity (average of septal and lateral walls), but a higher E/E' than patients without remodeling. Patients with remodeling used more diuretics, digoxin, oral anticoagulants and aldosterone antagonists than patients without remodeling. In the multivariate analyses, only E' Wave was an independent predictor of ventricular remodeling. Each 1 unit increase in the E' Wave was associated with a 59% increased odds of ventricular remodeling.Conclusions: In patients with anterior MI, despite contemporary treatment, ventricular remodeling is still a common event. In addition, diastolic function can have an important role as a predictor of remodeling in this scenario.

Impacto da hipertensão arterial no remodelamento ventricular, em pacientes com estenose aórtica

FUNDAMENTO: A hipertrofia ventricular esquerda (HVE) é comum em pacientes com hipertensão arterial sistêmica (HAS) e estenose aórtica (EAo) e, com certa frequência, encontramos associação entre estas patologias. Mas, em tal situação, não está clara a importância de cada uma na HVE. OBJETIVO: 1 - Avaliar em pacientes portadores de EAo, submetidos previamente a estudo ecocardiográfico, a magnitude da HVE, nos casos de EAo isolada e associada à HAS; 2 - Avaliar o padrão de remodelamento geométrico nas duas situações. MÉTODOS: Estudo retrospectivo, observacional e transversal, incluindo 298 pacientes consecutivos, com EAo ao ecocardiograma. HVE foi considerada para massa miocárdica > 224g em homens e > 162g em mulheres. Os pacientes foram classificados como portadores de EAo leve (gradiente máximo < 30,0 mmHg), moderada (entre 30 e 50,0 mmHg) e grave (> 50,0 mmHg), além disso, foram separados em dois subgrupos: com e sem HAS. RESULTADOS: Nos três níveis de lesão aórtica, a massa ventricular esquerda foi maior na EAo associada à HAS do que na EAo isolada (EAo leve: 172 ± 45 vs 223 ± 73g, p < 0,0001; EAo moderada: 189 ± 77 vs 245 ± 81g, p = 0,0313; EAo grave: 200 ± 62 vs 252 ± 88g, p = 0,0372). Presença de HAS esteve associada a maior risco de HVE (OR = 2,1,IC95%:1,2-3,6; p = 0,012). Pacientes com EAo grave e HAS apresentaram predomínio de hipertrofia concêntrica, quando comparados com aqueles normotensos (p = 0,013). CONCLUSÃO: em pacientes com EAo, a presença de HAS foi um fator adicional de aumento da massa ventricular esquerda, interferindo também na geometria ventricular.

Ecocardiografia de pacientes talassêmicos sem insuficiência cardíaca em tratamento com transfusões sanguíneas e quelação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Prevalência, classificação e características do refluxo cecoileal diagnosticado pelo enema opaco

OBJETIVO: Verificar, retrospectivamente, a prevalência do refluxo cecoileal diagnosticado pelo enema opaco, caracterizar sua distribuição etária e sexual e classificá-lo conforme o grau de intensidade. MATERIAIS E MÉTODOS: Foram revistos 715 enemas opacos, incluindo 268 homens e 447 mulheres com idade média de 54 anos. RESULTADOS: Dos 715 casos examinados, 46,5% apresentaram refluxo cecoileal, sendo 45% do tipo leve, 37,5% do tipo moderado e 17,5% do tipo severo. Refluxo cecoileal esteve presente em 48,3% das mulheres e em 43,6% dos homens. A distribuição percentual do refluxo cecoileal por faixa etária mostrou 46,1% nos indivíduos com menos de 21 anos, 42,1% nos indivíduos entre 21-40 anos, 49,8% nos indivíduos entre 41-60 anos e 44,7% nos indivíduos com mais de 60 anos. CONCLUSÃO: Refluxo cecoileal foi achado relativamente freqüente em nosso material, correspondendo os graus moderado e severo a 25% do material examinado. Aparentemente, não há associação entre seu surgimento e sexo ou idade. A etiopatogenia e conseqüências do refluxo cecoileal são ainda pouco conhecidas. Alguns estudos sugerem que o comprometimento de componentes da junção ileocecal, como os ligamentos, pode favorecer seu aparecimento. Entre as conseqüências prováveis, incluem-se a contaminação e alteração motora ileais, resultantes do material refluído do ceco.

TAXONOMIC POSITION of GUIRATINGIA MENDESI (MEGADESMIDAE) and THE EVOLUTION of PERMIAN ENDEMIC BIVALVE FAUNA of THE PARANA BASIN, BRAZIL

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Viés Analítico em Estudos Tafonômicos com Macroinvertebrados: Implicações (Paleo)Ambientais e (Paleo)Ecológicas

A review of recent literature shows that most taphonomic studies of Holocene and fossil macrovertebrates are not methodologically standardized. Hence, results from distinct studies are not comparable, even among researches sharing virtually identical goals, targeting the same biological group of similar age and depositional environment. The effects of the shell size in the taphonomic analysis are still poorly understood. In order to study this issue, the taphonomic signatures (articulation, valve type, fragmentation, abrasion, corrosion, edge modification, color alteration, bioerosion and encrustation) of brachiopod shells (Bouchardia rosea (Mawe)), from Ubatuba Bay in the northern coast of São Paulo State, were investigated according to the sieve sizes. In the study area, 14 collecting stations were sampled via Van Veen grab sampler, along a bathymetric gradient, ranging from 0 to 35 m of depth. Bulk samples were sieved through 8 mm, 6 mm, and 2 mm mesh sizes, yielding a total of 5.204 shells. The results indicate that, when taphonomic signatures were independently analyzed per size classes (8 mm, 6 mm, and 2 mm), the taphonomic signatures are recorded in a complex and random way. Additionally, cluster analysis showed that the similarity among the clusters vary according to the considered sieve size. Thus, the sieve size plays an important role in the distribution of taphonomic signatures in shells of distinct sizes. These results suggest that the concentration of the taphonomic analysis on one class (e.g., the largest sieve size, 8 mm) is not always the best method. Rather, the total data (all sieves included) seems more accurate in recording the whole spectrum of taphonomic processes recorded in shells of a given assemblage.

Numerical simulation of a radial diffuser turbulent airflow

In the present work are presented results from numerical simulations performed with the ANSYS-CFX (R) code. We have studied a radial diffuser flow case, which is the main academic problem used to study the flow behavior on flat plate valves. The radial flow inside the diffuser has important behavior such as the turbulence decay downstream and recirculation regions inside the valve flow channel due to boundary layer detachment. These flow structures are present in compressor reed valve configurations, influencing to a greater extent the compressor efficiency. The main target of the present paper was finding the simulation set-up (computational domain, boundary conditions and turbulence model) that better fits with experimental data published by Tabatabai and Pollard. The local flow turbulence and velocity profiles were investigated using four different turbulence models, two different boundary conditions set-up, two different computational domains and three different flow conditions (Re-in - Reynolds number at the diffuser inlet). We used the Reynolds stress (BSL); the k-epsilon; the RNG k-epsilon; and the shear stress transport (SST) k-omega turbulence models. The performed analysis and comparison of the computational results with experimental data show that the choice of the turbulence model, as well as the choice of the other computational conditions, plays an important role in the results physical quality and accuracy. (c) 2007 Elsevier B.V. All rights reserved.

Electrochemical stability and corrosion resistance of Ti-Mo alloys for biomedical applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Photo-electrochemical investigation of anodic oxide films on cast Ti-Mo alloys I. Anodic behaviour and effect of alloy composition

The anodic behaviour of cast Ti-Mo alloys, having different Mo contents (6-20 wt.%), was investigated in acidic and neutral aerated aqueous solutions. All sample showed a valve-metal behaviour, owing to formation and thickening of barrier-type anodic oxides displaying interference colours Growth kinetics. of passive films is influenced by both anodizing electrolyte and composition of the starting alloy. This last parameter was found to change also the solid-state properties of the films, explored by photoelectrochemical and impedance spectroscopy experiments. Thicker films (U(f) = 8 V/MSE) grown on alloys richer in Mo showed more resistive character and a photocurrent sign inversion under negative bias, that revealed an insulating character, whereas corresponding films grown on alloys with lower Mo content, as well as thinner films, behaved as n-type semiconductors. Results are discussed in terms of formation of a mixed Ti-Mo oxide phase. (C) 2008 Elsevier Ltd. All rights reserved