Long-term response of the nematode community to elevated atmospheric CO2 in a temperate dry grassland soil

Long-term effects of the elevated atmospheric CO2 on biosphere have been in focus of research since the last few decades. In this experiment undisturbed soil monoliths of loess grassland were exposed to an elevated CO2 environment (two-times the ambient CO2 level) for a period of six years with the aid of the open top chamber method. Control without a chamber and CO2 elevation was applied as well. Elevated CO2 level had very little impact oil soil food web. It did not influence either root and microbial biomass or microbial and nematode community structure. The only significant response was that density of the bacterial feeder genus Heterocephalobus increased in the chamber with elevated CO2 concentration. Application of the open top chambers initiated more changes on nematodes than the elevated CO2 level. Open top chamber (OTC) method decreased nematode density (total and plant feeder as well) to less than half of the original level. Negative effect was found on the genus level in the case of fungal feeder Aphelenchoides, plant feeder Helicotylenchus and Paratylenchus. It is very likely that the significantly lower belowground root biomass and partly its decreased quality reflected by the increased C/N ratio are the main responsible factors for the lower density of the plant feeder nematodes in the plots of chambers. According to diversity profiles, MI and MI(2-15) parameters, nematode communities in the open top chambers (both on ambient and elevated CO2 level) seem to be more structured than those under normal circumstances six years after start of the experiment.

DIRTMAP: the geological record of dust.

Atmospheric dust is an important feedback in the climate system, potentially affecting the radiative balance and chemical composition of the atmosphere and providing nutrients to terrestrial and marine ecosystems. Yet the potential impact of dust on the climate system, both in the anthropogenically disturbed future and the naturally varying past, remains to be quantified. The geologic record of dust provides the opportunity to test earth system models designed to simulate dust. Records of dust can be obtained from ice cores, marine sediments, and terrestrial (loess) deposits. Although rarely unequivocal, these records document a variety of processes (source, transport and deposition) in the dust cycle, stored in each archive as changes in clay mineralogy, isotopes, grain size, and concentration of terrigenous materials. Although the extraction of information from each type of archive is slightly different, the basic controls on these dust indicators are the same. Changes in the dust flux and particle size might be controlled by a combination of (a) source area extent, (b) dust emission efficiency (wind speed) and atmospheric transport, (c) atmospheric residence time of dust, and/or (d) relative contributions of dry settling and rainout of dust. Similarly, changes in mineralogy reflect (a) source area mineralogy and weathering and (b) shifts in atmospheric transport. The combination of these geological data with process-based, forward-modelling schemes in global earth system models provides an excellent means of achieving a comprehensive picture of the global pattern of dust accumulation rates, their controlling mechanisms, and how those mechanisms may vary regionally. The Dust Indicators and Records of Terrestrial and MArine Palaeoenvironments (DIRTMAP) data base has been established to provide a global palaeoenvironmental data set that can be used to validate earth system model simulations of the dust cycle over the past 150,000 years.

Dust sources and deposition during the last glacial maximum and current climate: a comparison of model results with paleodata from ice cores and marine sediments

Mineral dust aerosols in the atmosphere have the potential to affect the global climate by influencing the radiative balance of the atmosphere and the supply of micronutrients to the ocean. Ice and marine sediment cores indicate that dust deposition from the atmosphere was at some locations 2–20 times greater during glacial periods, raising the possibility that mineral aerosols might have contributed to climate change on glacial-interglacial time scales. To address this question, we have used linked terrestrial biosphere, dust source, and atmospheric transport models to simulate the dust cycle in the atmosphere for current and last glacial maximum (LGM) climates. We obtain a 2.5-fold higher dust loading in the entire atmosphere and a twenty-fold higher loading in high latitudes, in LGM relative to present. Comparisons to a compilation of atmospheric dust deposition flux estimates for LGM and present in marine sediment and ice cores show that the simulated flux ratios are broadly in agreement with observations; differences suggest where further improvements in the simple dust model could be made. The simulated increase in high-latitude dustiness depends on the expansion of unvegetated areas, especially in the high latitudes and in central Asia, caused by a combination of increased aridity and low atmospheric [CO2]. The existence of these dust source areas at the LGM is supported by pollen data and loess distribution in the northern continents. These results point to a role for vegetation feedbacks, including climate effects and physiological effects of low [CO2], in modulating the atmospheric distribution of dust.

Rock magnetism in soils of the Pampean plain. Buenos Aires province, Argentina. Linking climate and magnetic behaviour

Results of the study of Argiudolls in two localities (Zarate and Veronica) of the Pampean plain, Argentina, are presented in this contribution. This is a typical area covered by loess. The magnetic studies carried out allowed to determine the presence of detrital magnetite and titanomagnetite, as well as maghemite, pedogenic goethite and superparamagnetic particles (SP). In Veronica soils, a depletion of ferromagnetic minerals is recorded The dominant process in these soils has been the reductive loss of detrital magnetite and titanomagnetite. This is associated with a greater degree of evolution of the soil, which is determined by the concentration and type of detected clays. The higher clay concentration in these soils facilitated reducing conditions and a greater loss of detrital magnetic particles. The loss is reinforced under poor drainage conditions. In the poorly drained soil of Zarate, a concentration of magnetic particles is observed in the Bt horizon, which is associated with an illuviation process. The well drained soil of the same locality shows neoformation of SP particles. These particles would have an ephemeral life until a new wet period in the annual cycle occurs. Although some characteristics of the magnetic signal appear reinforced by the conditions of drainage, this aspect does not seem to be too significant, at least in the Pampean region with low topographic gradients.

Anthropogenic impacts on mineral weathering: A statistical perspective

Correspondence Analysis was adopted as tool for investigating the statistical structure of hydrochemical and weathering datasets of groundwater samples, with the main purpose of identifying impacts on mineral weathering caused by anthropogenic activities, namely fertilizing of farmlands. The hydrochemical dataset comprised measured concentrations of major inorganic compounds dissolved in groundwater, namely bicarbonate, silica (usually by-products of chemical weathering), chloride, sulphate and nitrate (typically atmospheric plus anthropogenic inputs). The weathering dataset consisted of calculated mass transfers of minerals being dissolved in loess sediments of a region located in SW Hungary (Szigetvár area), namely Na-plagioclase, calcite and dolomite, and of pollution-related concentrations of sodium, magnesium and calcium. A first run of Correspondence Analysis described groundwater composition in the study area as a system of triple influence, where spots of domestic effluents-dominated chemistries are surrounded by areas with agriculture-dominated chemistries, both imprinted over large regions of weathering dominated chemistries. A second run revealed that nitrification of N-fertilizers is promoting mineral weathering by the nitric acid reaction (anthropogenic pathway), in concurrence with the retreating of weathering by carbonic acid (natural pathway). It also indicated that dolomite and calcite are being players in a dedolomitization process driven by dissolution of gypsum fertilizers and nitrification of N-fertilizers. © 2013 Elsevier Ltd.

O chute com o membro dominante e não dominante realizado com a bola parada e em deslocamento no futsal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicação de modelos lineares para análise de expressão gênica em experimentos de microarrays

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Araçatuba formation: palustrine deposits from the initial sedimentation phase of the Bauru Basin

A Bacia Bauru (Cretáceo Superior), acumulou uma seqüência sedimentar continental essencialmente arenosa. Numa fase inicial desértica, o seu substrato basáltico foi soterrado por extensa e monótona cobertura de areias eólicas com intercalações subordinadas de depósitos de loesse. O relevo original do substrato favoreceu a formação de uma drenagem regional endorrêica, sob clima semi-árido, propiciando assim condições de formação do Paleopantanal Araçatuba. Os depósitos paludiais (Formação Araçatuba) constituem estratos tabulares de siltitos e arenitos de cor cinza claro esverdeado típica, eventualmente cimentados por carbonato de cálcio. Moldes e pseudomorfos de cristais de gipsita e dolomita foram identificados na unidade. Aparentemente, estão associados com gretas de ressecação, marcas de raízes e intervalos com laminação tipo climbing ripple, que indicam ambiente de águas salinas rasas e relativamente calmas, submetidas a fases de exposição subaérea e ressecação. Nos limites da área de ocorrência da Formação Araçatuba, as unidades arenosas podem exibir feições sigmóides e estratificação contorcida, comuns em depósitos deltaicos marginais. A Formação Araçatuba é contornada e posteriormente encoberta por depósitos eólicos da Formação Vale do Rio do Peixe.

Geomorfologia e quaternário do rio Vaza-Barris, Nordeste, Brasil

Pós-graduação em Geociências e Meio Ambiente - IGCE

Simulation of Ground-Water Flow in the Cedar River Alluvial Aquifer Flow System, Cedar Rapids, Iowa Scientific

The Cedar River alluvial aquifer is the primary source of municipal water in the Cedar Rapids, Iowa, area. Since 1992, the U.S. Geological Survey, in cooperation with the City of Cedar Rapids, has investigated the hydrogeology and water quality of the Cedar River alluvial aquifer. This report describes a detailed analysis of the ground-water flow system in the alluvial aquifer, particularly near well field areas. The ground-water flow system in the Cedar Rapids area consists of two main components, the unconsolidated Quaternary deposits and the underlying carbonate bedrock that has a variable fracture density. Quaternary deposits consist of eolian sand, loess, alluvium, and glacial till. Devonian and Silurian bedrock aquifers overlie the Maquoketa Shale (Formation) of Ordovician age, a regional confining unit. Ground-water and surface-water data were collected during the study to better define the hydrogeology of the Cedar River alluvial aquifer and Devonian and Silurian aquifers. Stream stage and discharge, ground-water levels, and estimates of aquifer hydraulic properties were used to develop a conceptual ground-water flow model and to construct and calibrate a model of the flow system. This model was used to quantify the movement of water between the various components of the alluvial aquifer flow system and provide an improved understanding of the hydrology of the alluvial aquifer.

Evaluating different methods of microarray data normalization

Abstract Background With the development of DNA hybridization microarray technologies, nowadays it is possible to simultaneously assess the expression levels of thousands to tens of thousands of genes. Quantitative comparison of microarrays uncovers distinct patterns of gene expression, which define different cellular phenotypes or cellular responses to drugs. Due to technical biases, normalization of the intensity levels is a pre-requisite to performing further statistical analyses. Therefore, choosing a suitable approach for normalization can be critical, deserving judicious consideration. Results Here, we considered three commonly used normalization approaches, namely: Loess, Splines and Wavelets, and two non-parametric regression methods, which have yet to be used for normalization, namely, the Kernel smoothing and Support Vector Regression. The results obtained were compared using artificial microarray data and benchmark studies. The results indicate that the Support Vector Regression is the most robust to outliers and that Kernel is the worst normalization technique, while no practical differences were observed between Loess, Splines and Wavelets. Conclusion In face of our results, the Support Vector Regression is favored for microarray normalization due to its superiority when compared to the other methods for its robustness in estimating the normalization curve.

Räumliche Verbreitung geogener Schwermetallgehalte in Böden des Taunus: Einfluss von periglazialer Deckschichtengenese

Während der Glazialphasen kam es in den europäischen Mittelgebirgen bedingt durch extensive solifluidale Massenbewegungen zur Bildung von Deckschichten. Diese Deckschichten repräsentieren eine Mischung verschiedener Substrate, wie anstehendes Ausgangsgestein, äolische Depositionen und lokale Erzgänge. Die räumliche Ausdehnung der Metallkontaminationen verursacht durch kleinräumige Erzgänge wird durch die periglaziale Solifluktion verstärkt. Das Ziel der vorliegenden Untersuchung war a) den Zusammenhang zwischen den Reliefeigenschaften und den Ausprägungen der solifluidalen Deckschichten und Böden aufzuklären, sowie b) mittels Spurenelementgehalte und Blei-Isotopen-Verhältnisse als Eingangsdaten für Mischungsmodelle die Beitrage der einzelnen Substrate zum Ausgangsmaterial der Bodenbildung zu identifizieren und quantifizieren und c) die räumliche Verteilung von Blei (Pb) in Deckschichten, die über Bleierzgänge gewandert sind, untersucht, die Transportweite des erzbürtigen Bleis berechnet und die kontrollierenden Faktoren der Transportweite bestimmt werden. Sechs Transekte im südöstlichen Rheinischen Schiefergebirge, einschließlich der durch periglaziale Solifluktion entwickelten Böden, wurden untersucht. Die bodenkundliche Geländeaufnahme erfolgte nach AG Boden (2005). O, A, B und C-Horizontproben wurden auf ihre Spurenelementgehalte und teilweise auf ihre 206Pb/207Pb-Isotopenverhältnisse analysiert. Die steuernden Faktoren der Verteilung und Eigenschaften periglazialer Deckschichten sind neben der Petrographie, Reliefeigenschaften wie Exposition, Hangneigung, Hangposition und Krümmung. Die Reliefanalyse zeigt geringmächtige Deckschichten in divergenten, konvexen Hangbereichen bei gleichzeitig hohem Skelettgehalt. In konvergent, konkaven Hangbereichen nimmt die Deckschichtenmächtigkeit deutlich zu, bei gleichzeitig zunehmendem Lösslehm- und abnehmendem Skelettgehalt. Abhängig von den Reliefeigenschaften und -positionen reichen die ausgeprägten Bodentypen von sauren Braunerden bis hin zu Pseudogley-Parabraunerden. Des Weiteren kommen holozäne Kolluvien in eher untypischen Reliefpositionen wie langgestreckten, kaum geneigten Hangbereichen oder Mittelhangbereichen vor. Außer für Pb bewegen sich die Spurenelementgehalte im Rahmen niedriger Hintergrundgehalte. Die Pb-Gehalte liegen zwischen 20-135 mg kg-1. Abnehmende Spurenelementgehalte und Isotopensignaturen (206Pb/207Pb-Isotopenverhältnisse) von Pb zeigen, dass nahezu kein Pb aus atmosphärischen Depositionen in die B-Horizonte verlagert wurde. Eine Hauptkomponentenanalyse (PCA) der Spurenelementgehalte hat vier Hauptsubstratquellen der untersuchten B-Horizonte identifiziert (Tonschiefer, Löss, Laacher-See-Tephra [LST] und lokale Pb-Erzgänge). Mittels 3-Komponenten-Mischungsmodell, das Tonschiefer, Löss und LST einschloss, konnten, bis auf 10 Ausreißer, die Spurenelementgehalte aller 120 B-Horizontproben erklärt werden. Der Massenbeitrag des Pb-Erzes zur Substratmischung liegt bei <0,1%. Die räumliche Pb-Verteilung zeigt Bereiche lokaler Pb-Gehaltsmaxima hangaufwärtiger Pb-Erzgänge. Mittels eines 206Pb/207Pb-Isotopenverhältnis-Mischungsmodells konnten 14 Bereiche erhöhter lokaler Pb-Gehaltsmaxima ausgewiesen werden, die 76-100% erzbürtigen Bleis enthalten. Mit Hilfe eines Geographischen Informationssystems wurden die Transportweiten des erzbürtigen Bleis mit 30 bis 110 m bestimmt. Die steuerenden Faktoren der Transportweite sind dabei die Schluffkonzentration und die Vertikalkrümmung. Diese Untersuchung zeigt, dass Reliefeigenschaften und Reliefposition einen entscheidenden Einfluss auf die Ausprägung der Deckschichten und Böden im europäischen Mittelgebirgsbereich haben. Mischungsmodelle in Kombination mit Spurenelementanalysen und Isotopenverhältnissen stellen ein wichtiges Werkzeug zur Bestimmung der Beiträge der einzelnen Glieder in Bodensubstratmischungen dar. Außerdem können lokale Bleierzgänge die natürlichen Pb-Gehalte in Böden, entwickelt in periglazialen Deckschichten der letzten Vereisungsphase (Würm), bis über 100 m Entfernung erhöhen.

Geographic information system-based decision support for soil conservation planning in Tajikistan

Soil erosion on sloping agricultural land poses a serious problem for the environment, as well as for production. In areas with highly erodible soils, such as those in loess zones, application of soil and water conservation measures is crucial to sustain agricultural yields and to prevent or reduce land degradation. The present study, carried out in Faizabad, Tajikistan, was designed to evaluate the potential of local conservation measures on cropland using a spatial modelling approach to provide decision-making support for the planning of spatially explicit sustainable land use. A sampling design to support comparative analysis between well-conserved units and other field units was established in order to estimate factors that determine water erosion, according to the Revised Universal Soil Loss Equation (RUSLE). Such factor-based approaches allow ready application using a geographic information system (GIS) and facilitate straightforward scenario modelling in areas with limited data resources. The study showed first that assessment of erosion and conservation in an area with inhomogeneous vegetation cover requires the integration of plot-based cover. Plot-based vegetation cover can be effectively derived from high-resolution satellite imagery, providing a useful basis for plot-wise conservation planning. Furthermore, thorough field assessments showed that 25.7% of current total cropland is covered by conservation measures (terracing, agroforestry and perennial herbaceous fodder). Assessment of the effectiveness of these local measures, combined with the RUSLE calculations, revealed that current average soil loss could be reduced through low-cost measures such as contouring (by 11%), fodder plants (by 16%), and drainage ditches (by 53%). More expensive measures such as terracing and agroforestry can reduce erosion by as much as 63% (for agroforestry) and 93% (for agroforestry combined with terracing). Indeed, scenario runs for different levels of tolerable erosion rates showed that more cost-intensive and technologically advanced measures would lead to greater reduction of soil loss. However, given economic conditions in Tajikistan, it seems advisable to support the spread of low-cost and labourextensive measures.

THE THREE DIMENSIONAL SHAPE AND ROUGHNESS OF MINERAL DUST

Mineral dust shape and roughness are important for a multitude of processes; it is known for aspherical shape but the true measurements in three dimensions are rare. Atomic Force Microscope was used for determine both 3D shape and roughness for two dust which are commonly used in laboratory experiments – Arizona Test Dust (ATD) and Kaolinite. We determined both of them are rather flat and round; an oblate spheroid would be a good model. Loess Filter was used to smooth the particles' surface and correlation analysis was used to examine the surfaces' properties of the dust; we found no features under 100nm scales. Also, our particles' surface area result is very similar to BET surface area.

Stable-Isotope and Trace Element Time Series from Fedchenko Glacier (Pamirs) Snow/Firn Cores

In summer 2005, two pilot snow/firn cores were obtained at 5365 and 5206 m a.s.l. on Fedchenko glacier, Pamirs, Tajikistan, the world's longest and deepest alpine glacier. The well-defined seasonal layering appearing in stable-isotope and trace element distribution identified the physical links controlling the climate and aerosol concentration signals. Air temperature and humidity/precipitation were the primary determinants of stable-isotope ratios. Most precipitation over the Pamirs originated in the Atlantic. In summer, water vapor was re-evaporated from semi-arid regions in central Eurasia. The semi-arid regions contribute to non-soluble aerosol loading in snow accumulated on Fedchenko glacier. In the Pamir core, concentrations of rare earth elements, major and other elements were less than those in the Tien Shan but greater than those in Antarctica, Greenland, the Alps and the Altai. The content of heavy metals in the Fedchenko cores is 2-14 times lower than in the Altai glaciers. Loess from Afghan-Tajik deposits is the predominant lithogenic material transported to the Pamirs. Trace elements generally showed that aerosol concentration tended to increase on the windward slopes during dust storms but tended to decrease with altitude under clear conditions. The trace element profile documented one of the most severe droughts in the 20th century.