Strengthening and measuring project management competences of engineering students

Since 2010 the Industrial Engineering School at Universidad Politécnica de Madrid (ETSII UPM) has its Plan Study accredited by ABET. Since then a big motivation has been promoted from the management team encouraging teachers to work on the measurement and strengthening of student¿s competences. Generic skills or behavior acquired significant importance in the workplace, particularly in relation to project management. Because of this, and framed within the requirements of the European Higher Education Area (EHEA), the curriculum of the new degrees are being developed under the competence-based learning. This situation leads to the need to have a clear measurement tool skills as a basis for developing them within the curriculum. A group of multidisciplinary teachers have been working together during two years to design measuring instruments valid for engineering students.

Optimization methods for the operating room management under uncertainty: stochastic programming vs. decomposition approach

The operating theatres are the engine of the hospitals; proper management of the operating rooms and its staff represents a great challenge for managers and its results impact directly in the budget of the hospital. This work presents a MILP model for the efficient schedule of multiple surgeries in Operating Rooms (ORs) during a working day. This model considers multiple surgeons and ORs and different types of surgeries. Stochastic strategies are also implemented for taking into account the uncertain in surgery durations (pre-incision, incision, post-incision times). In addition, a heuristic-based methods and a MILP decomposition approach is proposed for solving large-scale ORs scheduling problems in computational efficient way. All these computer-aided strategies has been implemented in AIMMS, as an advanced modeling and optimization software, developing a user friendly solution tool for the operating room management under uncertainty.

Balancing Wetland Management with the Military: Using Special Area Management Plans (SAMPs) to protect wetlands on U.S. Air Force Installations

U.S. Air Force installations by virtue of their isolation and often remote locations provide protection to critical habitats that would otherwise be susceptible to development and other stressors. While Air Force activities may not always compliment environmental protection, a balance between environmental protection and Air Force requirements must be achieved to minimize conflict. Special Area Management Plans (SAMPs) are a possible solution in the quest to balance conservation with mission requirements. Beale Air Force Base, California is the first military installation to pursue implementation of a SAMP. This project found that SAMP implementation could be a tool to successfully balance conservation efforts with military requirements on other Air Force installations; however, further education on the SAMP process would be required.

Baseline environmental management report.

The Baseline Environmental Management Report (Baseline Report) is an analytical tool to help guide the Departmental decisions and provide an accounting of the Department's progress, spending, and plans. In addition to illustrating the assumed path forward, the 1996 Baseline Report presents policy analyses that examine the consequences of modifying key program assumptions.

A Case Study of Polar Bear Co-Management in Alaska

Thesis (Master's)--University of Washington, 2016-06

A Review of the Residential Parking Management Program in Bellevue, WA

Thesis (Master's)--University of Washington, 2016-06

SubCM: A tool for improved visibility of software change in an industrial setting

Software Configuration Management is the discipline of managing large collections of software development artefacts from which software products are built. Software configuration management tools typically deal with artefacts at fine levels of granularity - such as individual source code files - and assist with coordination of changes to such artefacts. This paper describes a lightweight tool, designed to be used on top of a traditional file-based configuration management system. The add-on tool support enables users to flexibly define new hierarchical views of product structure, independent of the underlying artefact-repository structure. The tool extracts configuration and change data with respect to the user-defined hierarchy, leading to improved visibility of how individual subsystems have changed. The approach yields a range of new capabilities for build managers, and verification and validation teams. The paper includes a description of our experience using the tool in an organization that builds large embedded software systems.

An identification tool for the Australian weedy Sporobolus species based on random amplified polymorphic DNA (RAPD) profiles

Based on morphological features alone, there is considerable difficulty in identifying the 5 most economically damaging weed species of Sporobolus [ viz. S. pyramidalis P. Beauv., S. natalensis ( Steud.) Dur and Schinz, S. fertilis ( Steud.) Clayton, S. africanus (Poir.) Robyns and Tourney, and S. jacquemontii Kunth.] found in Australia. A polymerase chain reaction (PCR)-based random amplified polymorphic DNA ( RAPD) technique was used to create a series of genetic markers that could positively identify the 5 major weeds from the other less damaging weedy and native Sporobolus species. In the initial RAPD pro. ling experiment, using arbitrarily selected primers and involving 12 species of Sporobolus, 12 genetic markers were found that, when used in combination, could consistently identify the 5 weedy species from all others. Of these 12 markers, the most diagnostic were UBC51(490) for S. pyramidalis and S. natalensis; UBC43(310,2000,2100) for S. fertilis and S. africanus; and OPA20(850) and UBC43(470) for S. jacquemontii. Species-specific markers could be found only for S. jacquemontii. In an effort to understand why there was difficulty in obtaining species-specific markers for some of the weedy species, a RAPD data matrix was created using 40 RAPD products. These 40 products amplified by 6 random primers from 45 individuals belonging to 12 species, were then subjected to numerical taxonomy and multivariate system (NTSYS pc version 1.70) analysis. The RAPD similarity matrix generated from the analysis indicated that S. pyramidalis was genetically more similar to S. natalensis than to other species of the 'S. indicus complex'. Similarly, S. jacquemontii was more similar to S. pyramidalis, and S. fertilis was more similar to S. africanus than to other species of the complex. Sporobolus pyramidalis, S. jacquemontii, S. africanus, and S. creber exhibited a low within-species genetic diversity, whereas high genetic diversity was observed within S. natalensis, S. fertilis, S. sessilis, S. elongates, and S. laxus. Cluster analysis placed all of the introduced species ( major and minor weedy species) into one major cluster, with S. pyramidalis and S. natalensis in one distinct subcluster and S. fertilis and S. africanus in another. The native species formed separate clusters in the phenograms. The close genetic similarity of S. pyramidalis to S. natalensis, and S. fertilis to S. africanus may explain the difficulty in obtaining RAPD species-specific markers. The importance of these results will be within the Australian dairy and beef industries and will aid in the development of integrated management strategy for these weeds.

A practical tool to identify water bodies with potential for mosquito habitat under mangrove canopy: Large-scale airborne scanning in the thermal band

We address the practical issue of using thermal image data without adjustment or calibration for projects which do not require actual temperatures per se. Large scale airborne scanning in the thermal band at 8.5–13 μm was obtained for a mangrove and salt marsh in subtropical eastern Australia. For open sites, the raw image values were strongly positively correlated with ground level temperatures. For sites under mangrove canopy cover, image values indicated temperatures 2–4°C lower than those measured on the ground. The raw image was useful in identifying water bodies under canopy and has the potential for locating channel lines of deeper water. This could facilitate modification to increase flushing in the system, thereby reducing mosquito larval survival.

Construction of an Intraplate Fault System Model of South Australia, and Simulation Tool for the iSERVO Institute Seed Project

To foster ongoing international cooperation beyond ACES (APEC Cooperation for Earthquake Simulation) on the simulation of solid earth phenomena, agreement was reached to work towards establishment of a frontier international research institute for simulating the solid earth: iSERVO = International Solid Earth Research Virtual Observatory institute (http://www.iservo.edu.au). This paper outlines a key Australian contribution towards the iSERVO institute seed project, this is the construction of: (1) a typical intraplate fault system model using practical fault system data of South Australia (i.e., SA interacting fault model), which includes data management and editing, geometrical modeling and mesh generation; and (2) a finite-element based software tool, which is built on our long-term and ongoing effort to develop the R-minimum strategy based finite-element computational algorithm and software tool for modelling three-dimensional nonlinear frictional contact behavior between multiple deformable bodies with the arbitrarily-shaped contact element strategy. A numerical simulation of the SA fault system is carried out using this software tool to demonstrate its capability and our efforts towards seeding the iSERVO Institute.

National whoppercropper - risk management discussion support software

It is a paradox that in a country with one of the most variable climates in the world, cropping decisions are sometimes made with limited consideration of production and resource management risks. There are significant opportunities for improved performance based on targeted information regarding risks resulting from decision options. WhopperCropper is a tool to help agricultural advisors and farmers capture these benefits and use it to add value to their intuition and experience. WhopperCropper allows probability analysis of the effects of a range of selectable crop inputs and existing resources on yield and economic outcomes. Inputs can include agronomic inputs (e.g crop type, N fertiliser rate), resources (e.g soil water at sowing), and seasonal climate forecast (SOI phase). WhopperCropper has been successfully developed and refined as a discussion-support process for decision makers and their advisers in the northern grains region of Australia. The next phase of the project will build on the current project by extending its application nationally and enhancing the resource management aspects. A commercial partner, with over 800 advisor clients nationally, will participate in the project.

Achieving key dimensions of sustainability: Strategic visioning as a tourism destination planning tool

Tourism has had, and is continuing to have, a profound impact upon destinations, economically, environmentally and socially. The negative impacts of tourism have been attributed, among other things, to inadequate or non-existent planning frameworks for tourism development, and it has therefore been advocated that tourism planning is vital to offset some of these negative impacts. While several different approaches have been supported over the years, tourism planning based on the philosophies of sustainability has emerged as one ofthe most comprehensive approaches. However, two critical concepts have been identified as precursors to sustainable development: a strategic Qrientation towards tourism planning and enhanced levels of multiple stakeholder participation in the tourism planning process (Simpson 2001 ). While both strategic tourism planning and stakeholder participation and collaboration, have received considerable attention in the academic literature, there has been relatively little written about its practical application. However, the somewhat recent emergence of the strategic visioning concept as a destination planning tool may provide the necessary practical framework for incorporating stakeholder collaboration into destination strategic planning and management. This paper will provide a synthesis of the stakeholder collaboration, strategic planning and strategic visioning literatures, before conceptually examining the potential applicability._ of the strategic visioning process in achieving meaningful stakeholder participation and collaboration in destination planning.