Dynamic stability of laminated FGM plates based on higher-order shear deformation theory

This paper conducts a dynamic stability analysis of symmetrically laminated FGM rectangular plates with general out-of-plane supporting conditions, subjected to a uniaxial periodic in-plane load and undergoing uniform temperature change. Theoretical formulations are based on Reddy's third-order shear deformation plate theory, and account for the temperature dependence of material properties. A semi-analytical Galerkin-differential quadrature approach is employed to convert the governing equations into a linear system of Mathieu-Hill equations from which the boundary points on the unstable regions are determined by Bolotin's method. Free vibration and bifurcation buckling are also discussed as subset problems. Numerical results are presented in both dimensionless tabular and graphical forms for laminated plates with FGM layers made of silicon nitride and stainless steel. The influences of various parameters such as material composition, layer thickness ratio, temperature change, static load level, boundary constraints on the dynamic stability, buckling and vibration frequencies are examined in detail through parametric studies.

On measuring quality of a probabilistic commodity forecast for a system that incorporates seasonal climate forecasts

Regional commodity forecasts are being used increasingly in agricultural industries to enhance their risk management and decision-making processes. These commodity forecasts are probabilistic in nature and are often integrated with a seasonal climate forecast system. The climate forecast system is based on a subset of analogue years drawn from the full climatological distribution. In this study we sought to measure forecast quality for such an integrated system. We investigated the quality of a commodity (i.e. wheat and sugar) forecast based on a subset of analogue years in relation to a standard reference forecast based on the full climatological set. We derived three key dimensions of forecast quality for such probabilistic forecasts: reliability, distribution shift, and change in dispersion. A measure of reliability was required to ensure no bias in the forecast distribution. This was assessed via the slope of the reliability plot, which was derived from examination of probability levels of forecasts and associated frequencies of realizations. The other two dimensions related to changes in features of the forecast distribution relative to the reference distribution. The relationship of 13 published accuracy/skill measures to these dimensions of forecast quality was assessed using principal component analysis in case studies of commodity forecasting using seasonal climate forecasting for the wheat and sugar industries in Australia. There were two orthogonal dimensions of forecast quality: one associated with distribution shift relative to the reference distribution and the other associated with relative distribution dispersion. Although the conventional quality measures aligned with these dimensions, none measured both adequately. We conclude that a multi-dimensional approach to assessment of forecast quality is required and that simple measures of reliability, distribution shift, and change in dispersion provide a means for such assessment. The analysis presented was also relevant to measuring quality of probabilistic seasonal climate forecasting systems. The importance of retaining a focus on the probabilistic nature of the forecast and avoiding simplifying, but erroneous, distortions was discussed in relation to applying this new forecast quality assessment paradigm to seasonal climate forecasts. Copyright (K) 2003 Royal Meteorological Society.

Resolution enhancement by subtraction of confocal signals taken at different pinhole sizes

Subtractive imaging in confocal fluorescence light microscopy is based on the subtraction of a suitably weighted widefield image from a confocal image. An approximation to a widefield image can be obtained by detection with an opened confocal pinhole. The subtraction of images enhances the resolution in-plane as well as along the optic axis. Due to the linearity of the approach, the effect of subtractive imaging in Fourier-space corresponds to a reduction of low spatial frequency contributions leading to a relative enhancement of the high frequencies. Along the direction of the optic axis this also results in an improved sectioning. Image processing can achieve a similar effect. However, a 3D volume dataset must be acquired and processed, yielding a result essentially identical to subtractive imaging but superior in signal-to-noise ratio. The latter can be increased further with the technique of weighted averaging in Fourier-space. A comparison of 2D and 3D experimental data analysed with subtractive imaging, the equivalent Fourier-space processing of the confocal data only, and Fourier-space weighted averaging is presented. (C) 2003 Elsevier Ltd. All rights reserved.

Gravitational waves : a 100-year tool applied to the dark energy problem

Recent observations from type Ia Supernovae and from cosmic microwave background (CMB) anisotropies have revealed that most of the matter of the Universe interacts in a repulsive manner, composing the so-called dark energy constituent of the Universe. Determining the properties of dark energy is one of the most important tasks of modern cosmology and this is the main motivation for this work. The analysis of cosmic gravitational waves (GW) represents, besides the CMB temperature and polarization anisotropies, an additional approach in the determination of parameters that may constrain the dark energy models and their consistence. In recent work, a generalized Chaplygin gas model was considered in a flat universe and the corresponding spectrum of gravitational waves was obtained. In the present work we have added a massless gas component to that model and the new spectrum has been compared to the previous one. The Chaplygin gas is also used to simulate a L-CDM model by means of a particular combination of parameters so that the Chaplygin gas and the L-CDM models can be easily distinguished in the theoretical scenarios here established. We find that the models are strongly degenerated in the range of frequencies studied. This degeneracy is in part expected since the models must converge to each other when some particular combinations of parameters are considered.

Comparação de desempenho entre a formulação direta do Método dos Elementos de Contorno com Funções Radiais e o Método dos Elementos Finitos em problemas de Poisson e Helmholtz

O presente trabalho objetiva avaliar o desempenho do MECID (Método dos Elementos de Contorno com Interpolação Direta) para resolver o termo integral referente à inércia na Equação de Helmholtz e, deste modo, permitir a modelagem do Problema de Autovalor assim como calcular as frequências naturais, comparando-o com os resultados obtidos pelo MEF (Método dos Elementos Finitos), gerado pela Formulação Clássica de Galerkin. Em primeira instância, serão abordados alguns problemas governados pela equação de Poisson, possibilitando iniciar a comparação de desempenho entre os métodos numéricos aqui abordados. Os problemas resolvidos se aplicam em diferentes e importantes áreas da engenharia, como na transmissão de calor, no eletromagnetismo e em problemas elásticos particulares. Em termos numéricos, sabe-se das dificuldades existentes na aproximação precisa de distribuições mais complexas de cargas, fontes ou sorvedouros no interior do domínio para qualquer técnica de contorno. No entanto, este trabalho mostra que, apesar de tais dificuldades, o desempenho do Método dos Elementos de Contorno é superior, tanto no cálculo da variável básica, quanto na sua derivada. Para tanto, são resolvidos problemas bidimensionais referentes a membranas elásticas, esforços em barras devido ao peso próprio e problemas de determinação de frequências naturais em problemas acústicos em domínios fechados, dentre outros apresentados, utilizando malhas com diferentes graus de refinamento, além de elementos lineares com funções de bases radiais para o MECID e funções base de interpolação polinomial de grau (um) para o MEF. São geradas curvas de desempenho através do cálculo do erro médio percentual para cada malha, demonstrando a convergência e a precisão de cada método. Os resultados também são comparados com as soluções analíticas, quando disponíveis, para cada exemplo resolvido neste trabalho.

Influência de polimorfismos nos genes FcγRIIa, CD209, VDR, TNF-α, IL-4, IL-6 e INF-γ na persistência de sintomas clínicos da dengue na fase de covalescença

Diferenças na susceptibilidade do hospedeiro à infecção, na gravidade e na permanência do quadro clínico da doença podem ser atribuídas, em parte, às variações da resposta imune. Estas variações são associadas a polimorfismos de nucleotídeo único (do inglês: single nucleotide polymorphisms - SNPs). Como estudo prévio, foi realizada a caracterização da população geral do Espírito Santo (ES) - Brasil e de uma subpopulação do estado, de origem Pomerana, quanto aos SNPs -131 H/R, -336 A/G, TaqI, -308 A/G, -590 C/T, -174 G/C e +874 A/T nos genes FcγRIIa, CD209, VDR, TNFα, IL-4, IL-6 e INF-γ, respectivamente. Cem indivíduos da Grande Vitória representaram a população geral do ES e 59 indivíduos de Santa Maria de Jetibá representaram a população de origem Pomerana. Como a fase aguda da dengue é bem caracterizada, este estudo objetivou ampliar o conhecimento da fase de convalescença. Noventa e seis indivíduos diagnosticados com dengue sintomática no final de 2012 e início de 2013, no ES, foram acompanhados por 60 dias a partir do início dos sintomas por meio do preenchimento de um questionário clínico e epidemiológico em quatro entrevistas. A persistência de 37 sintomas clínicos da dengue foi avaliada. Para analisar a influência da genética do sistema imunológico do hospedeiro na persistência de sintomas clínicos da dengue na fase de convalescença, foi determinada a associação entre os sete SNPs, para os quais a população do ES foi caracterizada, e a persistência de sintomas. O DNA genômico dos participantes do estudo foi extraído do sangue periférico e a genotipagem dos SNPs foi realizada por reação em cadeia da polimerase - polimorfismo de comprimento de fragmento de restrição (do inglês: polymerase chain reaction - restriction fragment length polymorphism - PCR-RFLP) As frequências genotípicas de todos os SNPs encontraram-se em equilíbrio de Hardy-Weinberg (do inglês: Hardy-Weinberg equilibrium - HWE), com exceção do SNP no gene IL-6. Não houve diferença estatisticamente significante nas frequências genotípicas dos SNPs nos genes FcγRIIa, CD209, VDR, TNF-α e IL-4 entre as duas populações. Diferença estatisticamente significante foi encontrada entre as duas populações nas distribuições genotípicas dos SNPs nos genes IL-6 (p = 0,03) e INF-γ (p = 0,007). Trinta e sessenta dias após o início dos sintomas, 38,5% e 11,5% dos indivíduos com dengue sintomática reportaram ter pelo menos um sintoma clínico da dengue, respectivamente. Dos sintomas analisados, os mais persistentes foram os relacionados à síndrome da fadiga como mialgia, artralgia, astenia e mal-estar, sendo a mialgia o mais frequente. A persistência de sintomas em 30 dias foi associada ao gênero feminino (p = 0,044) e a persistência de sintomas constitucionais foi associada à dengue secundária (p = 0,041). O SNP no gene FcγRIIa, foi associado à persistência de sintomas em 30 dias, no subgrupo de indivíduos com dengue secundária (p = 0,046), sendo a presença do alelo H associada à não persistência de sintomas (p = 0,014). A presença do alelo A do SNP no gene TNF-α foi associada à não persistência de sintomas no subgrupo de indivíduos com dengue secundária (p = 0,025), sendo o genótipo GG associado à persistência de sintomas neurológicos, psicológicos e comportamentais em 30 dias (p = 0,038). A presença do alelo C do SNP no gene IL-6 foi associado à persistência de sintomas dermatológicos em 30 dias (p = 0,005). O perfil genético desses SNPs pode favorecer o estabelecimento de marcadores imunogenéticos associados à fase convalescente da infecção pelo vírus da dengue (do inglês: dengue virus - DENV).

Caracterização molecular, formação de biofilme e susceptibilidade a antimicrobianos de isolados de E. coli de aderência difusa Afa/Dr e não Afa/Dr

A Escherichia coli de aderência difusa (DAEC), um patotipo diarreiogênico de E. coli, corresponde a um grupo heterogêneo sem marcador de virulência comum a todos os isolados e de papel controverso na diarreia infantil. O objetivo deste estudo foi caracterizar genotipica e fenotipicamente amostras de DAEC, portadoras e não portadoras de adesinas Afa/Dr, isoladas de crianças com e sem diarreia. Em 70 amostras de DAEC, PCR foi realizado para pesquisa de genes descritos em DAEC, EAEC ou UPEC, que codificam: (i) oito adesinas fimbriais e afimbriais (fimH, papC, sfa, aggA, aafA, agg3A, aidA/aah, afaC); (ii) cinco toxinas (pet, astA, set1A, sat, hlyA); (iii) três proteínas captadoras/receptora de ferro (irp2, iucA, chuA/shuA); (iv) invasina (daaD) e; antígeno 43 (agn43). Ensaio de formação de biofilme foi realizado a partir da bactéria cultivada em caldo Luria-Bertani e inoculada em placas de poliestireno com DMEM suplementado com 0,4% glicose. A leitura da densidade ótica (DO490) foi realizada após coloração com safranina. Soroaglutinação para 23 antígenos O (Probac do Brasil) foi realizada em 50% das DAEC. Método de difusão de disco foi realizado para testar a suscetibilidade a 13 antimicrobianos. A presença de pelo menos um gene que codifica adesinas, toxinas, proteínas captadoras/receptora de ferro, invasina ou antígeno 43 foram encontrados em 58,6%, 51,4%, 80%, 48,6% e 57,1%, respectivamente, com os genes fimH, irp2, agn43, iucA, chuA/shuA, presentes em mais de 50% das amostras. Gene afaC+ (PCR) e/ou sonda afaBC+ (hibridização de colônias) classificou 50% das DAEC como Afa/Dr, sendo pet, sat, irp2, iucA, chuA/shuA e agn43 significantes nessas amostras (p<0,05). Do total das DAEC, 44,3% foram formadoras de biofilme, igualmente distribuídas entre as Afa/Dr e não Afa/Dr, e nenhum gene foi associado com esse fenótipo. Sorologia de 35 amostras evidenciou os seguintes sorogrupos: 1 O29, 2 O125, 2 O127 e 7 O86. Todas as O86 foram de DAEC Afa/Dr. Maiores frequências de resistência antimicrobiana foram encontradas para ampicilina (55,7%), sulfametoxazol/trimetoprim (35,7%) e tetraciclina (28,6%) e o perfil resistente/intermediário para amoxicilina/ácido clavulânico, ampicilina, sulfametoxazol/trimetoprim foi significante nas DAEC Afa/Dr, assim como a multi-droga resistência (p<0,05). Em conclusão, observou-se: (i) alta frequência de fimH e pet e presença de agn43, até então não descrito em DAEC, em frequências similares àquelas encontradas em EAEC, UPEC e EAEC/UPEC, respectivamente; (ii) que as amostras de DAEC Afa/Dr e não Afa/Dr constituíram grupos com perfis genéticos diferenciados entre si; (iii) poucos sorogrupos foram encontrados entre as DAEC; (iv) frequências de resistência menores quando comparado com as poucas descrições em DAEC, sugerindo uma menor pressão seletiva da população do presente estudo e; (v) amostras de DAEC Afa/Dr podem representar um importante reservatório de genes de resistência a antimicrobianos, além de diversos fatores de virulência.

Piezoresistive sensors for force mapping of hip-prostheses

The success of artificial prosthetic replacements depends on the fixation of the artificial prosthetic component after being implanted in the thighbone. The materials for fixation are subject to mechanical stresses, which originate permanent deformations, incipient cracks and even fatigue fractures. This work shows the possibility of monitoring the mechanical stress over time in prosthesis. In this way, highly sensitive silicon thin-film piezoresistive sensors were developed attached to prosthesis and their results compared with commercial strain gauge sensors. Mechanical stress-strain experiments were performed in compressive mode, during 10,000 cycles. Experimental data was acquired at mechanical vibration frequencies of 0.5 Hz, 1 Hz and 5 Hz, and sent to a computer by means of a wireless link. The results show that there is a decrease in sensitivity of the thin-film silicon piezoresistive sensors when they are attached to the prosthesis, but this decrease does not compromise its monitoring performance. The sensitivity, compared to that of commercial strain gauges, is much larger due to their higher gauge factors (-23.5), when compared to the GFs of commercial sensors (2).

Chronic stress disrupts neural coherence between cortico-limbic structures

Chronic stress impairs cognitive function, namely on tasks that rely on the integrity of cortico-limbic networks. To unravel the functional impact of progressive stress in cortico-limbic networks we measured neural activity and spectral coherences between the ventral hippocampus (vHIP) and the medial prefrontal cortex (mPFC) in rats subjected to short term stress (STS) and chronic unpredictable stress (CUS). CUS exposure consistently disrupted the spectral coherence between both areas for a wide range of frequencies, whereas STS exposure failed to trigger such effect. The chronic stress-induced coherence decrease correlated inversely with the vHIP power spectrum, but not with the mPFC power spectrum, which supports the view that hippocampal dysfunction is the primary event after stress exposure. Importantly, we additionally show that the variations in vHIP-to-mPFC coherence and power spectrum in the vHIP correlated with stress-induced behavioral deficits in a spatial reference memory task. Altogether, these findings result in an innovative readout to measure, and follow, the functional events that underlie the stress-induced reference memory impairments.

Genotoxicity biomarkers in occupational exposure to formaldehyde: the case of histopathology laboratories

Formaldehyde, classified by the IARC as carcinogenic in humans and experimental animals, is a chemical agent that is widely used in histopathology laboratories. The exposure to this substance is epidemiologically linked to cancer and to nuclear changes detected by the cytokinesis-block micronucleus test (CBMN). This method is extensively used in molecular epidemiology, since it provides information on several biomarkers of genotoxicity, such as micronuclei (MN), which are biomarkers of chromosomes breakage or loss, nucleoplasmic bridges (NPB), common biomarkers of chromosome rearrangement, poor repair and/or telomere fusion, and nuclear buds (NBUD), biomarkers of elimination of amplified DNA. The aim of this study is to compare the frequency of genotoxicity biomarkers, provided by the CBMN assay in peripheral lymphocytes and the MN test in buccal cells, between individuals occupationally exposed and non-exposed to formaldehyde and other environmental factors, namely tobacco and alcohol consumption. The sample comprised two groups: 56 individuals occupationally exposed to formaldehyde (cases) and 85 unexposed individuals (controls), from whom both peripheral blood and exfoliated epithelial cells of the oral mucosa were collected in order to measure the genetic endpoints proposed in this study. The mean level of TWA8h was 0.16±0.11ppm (

XRCC3 THR241MET polymorphism influence on nuclear buds frequency in exposed to formaldehyde

Formaldehyde (FA), also known as formalin, formal and methyl aldehydes, is a colorless, flammable, strong-smelling gas. It has an important application in embalming tissues and that result in exposures for workers in the pathology anatomy laboratories and mortuaries. Occupational exposure to FA has been shown to induce nasopharyngeal cancer and has been classified as carcinogenic to humans (group 1) on the basis of sufficient evidence in humans and sufficient evidence in experimental animals. Manifold in vitro studies clearly indicated that FA is genotoxic. FA induced various genotoxic effects in proliferating cultured mammalian cells. The cytokinesis-block micronucleus (CBMN) assay was originally developped as an ideal system form easuring micronucleus (MN), however it can also be used to measure nucleoplasmic bridges (NBP) and nuclear buds (NBUD). Over the past decade another unique mechanism of micronucleus formation, known as nuclear budding has emerged. NBUDS is considered as a marker of gene amplification and/or altered gene dosage because the nuclear budding process is the mechanism by which cells removed amplified and/excess DNA.

SAR calculation using FDTD simulations

The main intend of this work, is to determinate the Specific Absorption Rate (SAR) on human head tissues exposed to radiation caused by sources of 900 and 1800MHz, since those are the typical frequencies for mobile communications systems nowadays. In order to determinate the SAR, has been used the FDTD (Finite Difference Time Domain), which is a numeric method in time domain, obtained from the Maxwell equations in differential mode. In order to do this, a computational model from the human head in two dimensions made with cells of the smallest possible size was implemented, respecting the limits from computational processing. It was possible to verify the very good efficiency of the FDTD method in the resolution of those types of problems.

Stability Condition Based Sliding Mode Modulators for Multilevel Power Converters

Sliding mode controllers for power converters usually employ hysteresis comparators to directly generate the power semiconductors switching states. This paper presents a new sliding mode modulator based on the direct implementation of the sliding mode stability condition, which for multilevel power converters shows advantages, as branch equalized switching frequencies and less distortion on the ac currents when operating near the rated converter power. The new sliding mode multilevel modulator is used to control a three-phase multilevel converter, operated as a reactive power compensator (STATCOM), implementing the stability condition in a digital signal processing system. The performance of this new sliding mode modulator is compared with a multilevel modulator based on hysteresis comparators. Simulation and experimental results are presented in order to highlight the system operation and control robustness.

XRCC3241 Polymorphism influence on genotoxicity biomarkers frequency in workers occupationaly exposed to formaldehyde

Formaldehyde (FA) is ubiquitous in the environment and is a chemical agent that possesses high reactivity. Occupational exposure to FA has been shown to induce nasopharyngeal cancer and has been classified as carcinogenic to humans (group 1) on the basis of sufficient evidence in humans and sufficient evidence in experimental animals. The exposure to this substance is epidemiologically linked to cancer and nuclear changes detected by the cytokinesis-block micronucleus test (CBMN). This method is extensively used in molecular epidemiology, since it determines several biomarkers of genotoxicity, such as micronucleus (biomarkers of chromosomes breakage or loss), nucleoplasmic bridges (biomarker of chromosome rearrangement, poor repair and / or telomeres fusion) and nuclear buds (biomarker of elimination of amplified DNA). The gene X-ray repair cross-complementing group 3 (XRCC3) is involved in homologous recombination repair of cross-links and chromosomal double-strand breaks and at least one polymorphism has been reported in codon 241, a substitution of a methionine for a threonine.

Effects of exposure to formaldehyde and tobacco smoking on genotoxicity biomarkers

Formaldehyde (FA) is a colour less gas widely used in the industry and hospitals as an aqueous solution, formalin. It is extremely reactive and induces various genotoxic effects in proliferating cultured mammalian cells. Tobacco smoke has been epidemiologically associated to a higher risk of development of cancer, especially in the oral cavity, larynx and lungs, as these are places of direct contact with many carcinogenic tobacco’s compounds. Approximately 90% of human cancers originate from epithelial cells. Therefore, it could be argued that oral epithelial cells represent a preferred target site for early genotoxic events induced by carcinogenic agents entering the body via inhalation and ingestion. The cytokinesis-blocked micronucleus assay (CBMN) in human lymphocytes is one of the most commonly used methods for measuring DNA damage, namely the detection of micronucleus, nucleoplasmic bridges, and nuclear buds.