Development of Abutment Design Standards for Local Bridge Designs, Volume 1 of 3, Development of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume (this volume) summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 3 of 3, Verification of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume (this volume) provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 2 of 3, Design Manual, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume (this volume) introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Flow-R, a model for susceptibility mapping of debris flows and other gravitational hazards at a regional scale

The development of susceptibility maps for debris flows is of primary importance due to population pressure in hazardous zones. However, hazard assessment by processbased modelling at a regional scale is difficult due to the complex nature of the phenomenon, the variability of local controlling factors, and the uncertainty in modelling parameters. A regional assessment must consider a simplified approach that is not highly parameter dependant and that can provide zonation with minimum data requirements. A distributed empirical model has thus been developed for regional susceptibility assessments using essentially a digital elevation model (DEM). The model is called Flow-R for Flow path assessment of gravitational hazards at a Regional scale (available free of charge under www.flow-r.org) and has been successfully applied to different case studies in various countries with variable data quality. It provides a substantial basis for a preliminary susceptibility assessment at a regional scale. The model was also found relevant to assess other natural hazards such as rockfall, snow avalanches and floods. The model allows for automatic source area delineation, given user criteria, and for the assessment of the propagation extent based on various spreading algorithms and simple frictional laws.We developed a new spreading algorithm, an improved version of Holmgren's direction algorithm, that is less sensitive to small variations of the DEM and that is avoiding over-channelization, and so produces more realistic extents. The choices of the datasets and the algorithms are open to the user, which makes it compliant for various applications and dataset availability. Amongst the possible datasets, the DEM is the only one that is really needed for both the source area delineation and the propagation assessment; its quality is of major importance for the results accuracy. We consider a 10m DEM resolution as a good compromise between processing time and quality of results. However, valuable results have still been obtained on the basis of lower quality DEMs with 25m resolution.

Testing for local adaptation in brown trout using reciprocal transplants.

ABSTRACT: BACKGROUND: Local adaptation can drive the divergence of populations but identification of the traits under selection remains a major challenge in evolutionary biology. Reciprocal transplant experiments are ideal tests of local adaptation, yet rarely used for higher vertebrates because of the mobility and potential invasiveness of non-native organisms. Here, we reciprocally transplanted 2500 brown trout (Salmo trutta) embryos from five populations to investigate local adaptation in early life history traits. Embryos were bred in a full-factorial design and raised in natural riverbeds until emergence. Customized egg capsules were used to simulate the natural redd environment and allowed tracking the fate of every individual until retrieval. We predicted that 1) within sites, native populations would outperform non-natives, and 2) across sites, populations would show higher performance at 'home' compared to 'away' sites. RESULTS: There was no evidence for local adaptation but we found large differences in survival and hatching rates between sites, indicative of considerable variation in habitat quality. Survival was generally high across all populations (55% +/- 3%), but ranged from 4% to 89% between sites. Average hatching rate was 25% +/- 3% across populations ranging from 0% to 62% between sites. CONCLUSION: This study provides rare empirical data on variation in early life history traits in a population network of a salmonid, and large-scale breeding and transplantation experiments like ours provide powerful tests for local adaptation. Despite the recently reported genetic and morphological differences between the populations in our study area, local adaptation at the embryo level is small, non-existent, or confined to ecological conditions that our experiment could not capture.

Symbolic meaning of local identity – A case study on Barcelona place brand representation

The core objective of this research process was to design an operational tool for place brand analysis. By modelling the emotional significance and the deeper-lying symbols associated to a specific place identity I expected to create a semiotic tool that could be applied, mutatis mutandis, on other similar place brands. As a field case study to develop the instrument, my choice of the research arena was Barcelona city, the capital of Catalonia Autonomous Community, Spain. Barcelona brand identity was approached in the line of the Chicago Urban Anthropology School. The research methods were designed according to the prescriptions of the urban anthropology, namely qualitative methods: in-depth interviews and discourse analysis. The final research outcome was a model summarizing a range of specific emotional values that support a place brand to position in the collective mindset and to assume a positively valued status and identity in the world order.

Repeated exposure to Lutzomyia intermedia sand fly saliva induces local expression of interferon-inducible genes both at the site of injection in mice and in human blood.

During a blood meal, Lutzomyia intermedia sand flies transmit Leishmania braziliensis, a parasite causing tegumentary leishmaniasis. In experimental leishmaniasis, pre-exposure to saliva of most blood-feeding sand flies results in parasite establishment in absence of any skin damages in mice challenged with dermotropic Leishmania species together with saliva. In contrast, pre-immunization with Lu. intermedia salivary gland sonicate (SGS) results in enhanced skin inflammatory exacerbation upon co-inoculation of Lu. intermedia SGS and L. braziliensis. These data highlight potential unique features of both L. braziliensis and Lu. intermedia. In this study, we investigated the genes modulated by Lu. intermedia SGS immunization to understand their potential impact on the subsequent cutaneous immune response following inoculation of both SGS and L. braziliensis. The cellular recruitment and global gene expression profile was analyzed in mice repeatedly inoculated or not with Lu. intermedia. Microarray gene analysis revealed the upregulation of a distinct set of IFN-inducible genes, an immune signature not seen to the same extent in control animals. Of note this INF-inducible gene set was not induced in SGS pre-immunized mice subsequently co-inoculated with SGS and L. braziliensis. These data suggest the parasite prevented the upregulation of this Lu. intermedia saliva-related immune signature. The presence of these IFN-inducible genes was further analyzed in peripheral blood mononuclear cells (PBMCs) sampled from uninfected human individuals living in a L. braziliensis-endemic region of Brazil thus regularly exposed to Lu. intermedia bites. PBMCs were cultured in presence or absence of Lu. intermedia SGS. Using qRT-PCR we established that the IFN-inducible genes induced in the skin of SGS pre-immunized mice, were also upregulated by SGS in PBMCs from human individuals regularly exposed to Lu. intermedia bites, but not in PBMCs of control subjects. These data demonstrate that repeated exposure to Lu. intermedia SGS induces the expression of potentially host-protective IFN-inducible genes.

Face the Facts: Topics to Discuss Now with Your Aging Parents, 2003

The The Eldercare Locator, a nationwide service funded by the U.S. Administration on Aging that links older consumers and their families to local aging services, produced this guide to help families “face the facts” about these important topics. The overview below addresses some key areas of concern, suggested questions to ask, and ways in which families might initiate conversations about these often difficult to discuss topics with their aging parents.

Disseny i implementació en un mòdul linux encastat d’una eina de gestió local per a equips de xarxa de l'empresa W-onesys S.L.

Aquest projecte, s’ha desenvolupat en un marc empresarial, concretament al departamentR+D+i de l’empresa Wonesys S.L. de Sant Cugat del Vallès. L’empresa es dedica aldesenvolupament d’equipament per transmissions òptiques.Les eines de gestió dels equips existents, no satisfan els requeriments de l’empresa i amb aquest projecte es busca la implementació d’una eina per fer-ho. Entre les aplicacions actuals es pot trobar, per una banda, un sistema EMS (Element Management System) que ofereix interfíciegràfica d’usuari, però que requereix una infrastructura complexa per ser executada. Per l’altra banda, fins a tres interfícies diferents per connectar directament amb els equips, dues d’elles basades en protocols estàndard i una tercera que implementa un protocol propietari. Es tractad’interfícies d’intercanvi de text, per tant, la gestió mitjançant les mateixes es fa molt poc pràctica tot i no requerir cap infrastructura complexa com en el cas anterior. Una combinació de les virtuts de les anteriors són, a grans trets, els requeriments de la nova aplicació. Es volconstruir, doncs, una aplicació amb interfície gràfica d’usuari complerta que pugui ser accessible de forma senzilla utilitzant, tan sols, un terminal com a maquinari de suport.Un anàlisi del mercat il·lustra que hi ha molta disparitat en aplicacions similars. Hi ha grans diferències entre aplicacions de fabricants d’equipament i altres que només fan aplicacions per tercers.De les diverses possibilitats presentades per dur a terme la implementació, després d’un detingut anàlisi, es considera que la millor opció és el desenvolupament d’una aplicació web. Com l’aplicació ha de residir en un sistema Linux encastat, es fa un repàs del concepte ‘encastat’. Es defineix el terme i es dóna una mirada al mercat. Es descriuen i es comparen les arquitecturesARM i x86 i es relacionen amb el món encastat.Al tractar-se d’un sistema encastat amb arquitectura diferent a la d’un entorn web habitual, l’elecció de les eines representa un paper molt important, així com el procés de compilació i configuració d’eines que tradicionalment s’obtenen compilades.S’han escollit eines de programari lliure i dissenyades especialment per a entorns encastats. El patró de disseny usat pel desenvolupament de l’aplicació web és el Model View Controller, que facilita l’estructuració i un correcte manteniment de l’aplicació.La utilització de la tecnologia web resulta en una aplicació senzilla d’utilitzar, sense necessitat d’instal·lació de cap tipus per part de l’usuari i amb una interfície gràfica molt versàtil. La valoració per part dels usuaris de l’aplicació, tant treballadors de l’empresa en tasques dedesenvolupament i depuració, com clients en equips en explotació, és molt positiva. Tant és així, que sorgeixen opcions per reformular el sistema EMS per unificar interfícies i reaprofitar codi.

How current Tax Laws affect Woodlands Owners, August 1998

This report is on the effects of the tax reforam act of 1986 on timber production activites.

El Tabac al món : la indústria a nivell local i global, legislació, problemes i reptes de futur

Per què a un fumador del Canadà li costa 10 vegades més diners comprar un paquet de tabac que el que li costa a un fumador de Cuba? Què se n’ha fet dels anuncis de Marlboro als cotxes de l’escuderia automovilística Ferrari? Comés que s’han creat espais reservats per a fumadors en els últims anys? Aquestes i altres preguntes sobre el món del tabac conformen l’objecte del nostre treball d’investigació. El nostre propòsit és intentar donar resposta a qüestions com aquestes, i fer que el lector entengui realment a què es deuen aquests canvis en l’estructura del mercat del tabac. Mostrarem, mitjançant una mirada analítica dels diferents factors, que gran part d’aquests efectes en un producte (com pot ser el cigarret, en el cas que ens ocupa) són extrapolables a altres béns i que es poden explicar des del punt de vista econòmic, examinant les decisions d’agents amagats com ara el govern, i considerant les repercussions dels diferents tipus de polítiques.Com tots sabem, el món actual està conformat per un seguit de relacions entre individus, o millor dit, agents econòmics que interactuen entre ells. Els resultats d’aquestes interaccions determinen el comportament de variables que, ben definides, poden ser estudiades, així com els seus efectes. Nosaltres hem intentat mostrar d’una manera senzilla i a l’abast de tothom fins a quin punt arriben aquestes interrelacions. El que preteníem en tot moment basar-nos en dades objectives obtingudes previ estudi. Es per això que, de la mateixa manera que al acabar el treball el lector serà capaç d’entendre per què varia elpreu del mateix bé al creuar una frontera, queda a càrrec de cadascú determinar si, per exemple, els fumadors són objectes de persecució o de si les mesures paternalistes del govern envers la prohibició de la publicitat estan justificades.

Histone deacetylase inhibitors repress macrophage migration inhibitory factor (MIF) expression by targeting MIF gene transcription through a local chromatin deacetylation.

The cytokine macrophage migration inhibitory factor plays a central role in inflammation, cell proliferation and tumorigenesis. Moreover, macrophage migration inhibitory factor levels correlate with tumor aggressiveness and metastatic potential. Histone deacetylase inhibitors are potent antitumor agents recently introduced in the clinic. Therefore, we hypothesized that macrophage migration inhibitory factor would represent a target of histone deacetylase inhibitors. Confirming our hypothesis, we report that histone deacetylase inhibitors of various chemical classes strongly inhibited macrophage migration inhibitory factor expression in a broad range of cell lines, in primary cells and in vivo. Nuclear run on, transient transfection with macrophage migration inhibitory factor promoter reporter constructs and transduction with macrophage migration inhibitory factor expressing adenovirus demonstrated that trichostatin A (a prototypical histone deacetylase inhibitor) inhibited endogenous, but not episomal, MIF gene transcription. Interestingly, trichostatin A induced a local and specific deacetylation of macrophage migration inhibitory factor promoter-associated H3 and H4 histones which did not affect chromatin accessibility but was associated with an impaired recruitment of RNA polymerase II and Sp1 and CREB transcription factors required for basal MIF gene transcription. Altogether, this study describes a new molecular mechanism by which histone deacetylase inhibitors inhibit MIF gene expression, and suggests that macrophage migration inhibitory factor inhibition by histone deacetylase inhibitors may contribute to the antitumorigenic effects of histone deacetylase inhibitors.

Rules vs. political discretion: evidence from constitutionally guaranteed transfers to local governments in Brazil

Can rules be used to shield public resources from political interference? The Brazilian constitution and national tax code stipulate that revenue sharing transfers to municipal governments be determined by the size of counties in terms of estimated population. In this paper I document that the population estimates which went into the transfer allocation formula for the year 1991 were manipulated, resulting in significant transfer differentials over the entire 1990's. I test whether conditional on county characteristics that might account for the manipulation, center-local party alignment, party popularity and the extent of interparty fragmentation at the county level are correlated with estimated populations in 1991. Results suggest that revenue sharing transfers were targeted at right-wing national deputies in electorally fragmented counties as well as aligned local executives.

The short arm of the law: judicial institutions and local governance in Brazil

This paper estimates the effect of judicial institutions on governance at the local level in Brazil. Our estimation strategy exploits a unique institutional feature of state judiciary branches which assigns prosecutors and judges to the most populous among contiguous counties forming a judiciary district. As a result of this assignment mechanism there are counties with nearly identical populations, some with and some without local judicial presence, which we exploit to impute counterfactual outcomes. Conditional on observable county characteristics, offenses per civil servant are about 35% lower in counties that have a local seat of the state judiciary. The lower incidence of infractions stems mostly from fewer violations of financial management regulations by local administrators, fewer instances of problems in project execution and project managment, fewer cases of non-existent or ineffective civil society oversight and fewer cases of improper handling of remittances to local residents.

Gene-flow in a mosaic hybrid zone: is local introgression adaptive?

Genome-wide scans of genetic differentiation between hybridizing taxa can identify genome regions with unusual rates of introgression. Regions of high differentiation might represent barriers to gene flow, while regions of low differentiation might indicate adaptive introgression-the spread of selectively beneficial alleles between reproductively isolated genetic backgrounds. Here we conduct a scan for unusual patterns of differentiation in a mosaic hybrid zone between two mussel species, Mytilus edulis and M. galloprovincialis. One outlying locus, mac-1, showed a characteristic footprint of local introgression, with abnormally high frequency of edulis-derived alleles in a patch of M. galloprovincialis enclosed within the mosaic zone, but low frequencies outside of the zone. Further analysis of DNA sequences showed that almost all of the edulis allelic diversity had introgressed into the M. galloprovincialis background in this patch. We then used a variety of approaches to test the hypothesis that there had been adaptive introgression at mac-1. Simulations and model fitting with maximum-likelihood and approximate Bayesian computation approaches suggested that adaptive introgression could generate a "soft sweep," which was qualitatively consistent with our data. Although the migration rate required was high, it was compatible with the functioning of an effective barrier to gene flow as revealed by demographic inferences. As such, adaptive introgression could explain both the reduced intraspecific differentiation around mac-1 and the high diversity of introgressed alleles, although a localized change in barrier strength may also be invoked. Together, our results emphasize the need to account for the complex history of secondary contacts in interpreting outlier loci.