Techniques for the transport and maintenance of scleractinian coral

Several small scleractinian coral colonies were collected from a remote reef and transferred [to] the Louisiana Universities Marine Center (LUMCON) for in vitro reproductive and larval studies. The species used here were Porites astreoides and Diploria strigosa. Colony size was ~20 cm in diameter. Colonies were brought to the surface by liftbag and stored in modified ice coolers. They were transported from Freeport, TX to Cocodrie, LA by truck for nearly 15 hours where field conditions were simulated in waiting aquaria. This document describes the techniques and equipment that were used, how to outfit such aquaria, proper handling techniques for coral colonies, and several eventualities that the mariculturist should be prepared for in undertaking this endeavor. It will hopefully prevent many mistakes from being made.

Application of domain decomposition and transmission line modelling techniques to 2D, time-domain, finite element problems

In this paper a recently published finite element method, which combines domain decomposition with a novel technique for solving nonlinear magnetostatic finite element problems is described. It is then shown how the method can be extended to, and optimised for, the solution of time-domain problems. © 1999 IEEE.

The use of C-V techniques to investigate instability mechanisms in M-I-S structures

In the field of flat panel displays, the current leading technology is the Active Matrix liquid Crystal Display; this uses a-Si:H based thin film transistors (TFTs) as the switching element in each pixel. However, under gate bias a-Si:H TFTs suffer from instability, as is evidenced by a shift in the gate threshold voltage. The shift in the gate threshold voltage is generally measured from the gate transfer characteristics, after subjecting the TFT to prolonged gate bias. However, a major drawback of this measurement method is that it cannot distinguish whether the shift is caused by the change in the midgap states in the a-Si:H channel or by charge trapping in the gate insulator. In view of this, we have developed a capacitance-voltage (C-V) method to measure the shift in threshold voltage. We employ Metal-Insulator-Semiconductor (MIS) structures to investigate the threshold voltage shift as they are simpler to fabricate than TFTs. We have investigated a large of number Metal/a-Si:H/Si3N4/Si+n structures using our C-V technique. From, the C-V data for the MIS structures, we have found that the relationship between the thermal energy and threshold voltage shift is similar to that reported by Wehrspohn et. al in a-Si:H TFTs (J Appl. Phys, 144, 87, 2000). The a-Si:H and Si3N4 layers were grown using the radio-frequency plasma-enhanced chemical vapour deposition technique.

Analytical techniques for indentation of viscoelastic materials

Indentation of linearly viscoelastic materials is explored using elastic-viscoelastic correspondence analysis for both conical-pyramidal and spherical indentation. Boltzmann hereditary integrals are used to generate displacement-time solutions for loading at constant rate and creep following ramp loading. Experimental data for triangle- and trapezoidal-loading are examined for commercially-available polymers and compared with analytical solutions. Emphasis is given to the use of multiple experiments to test the fidelity and predictive capability of the obtained material creep function. Plastic deformation occurs in sharp indentation of glassy polymers and is found to complicate the viscoelastic analysis. A new method is proposed for estimating a material time-constant from peak displacement or hardness data obtained in pyramidal indentation tests performed at different loading rates.

Production of triploid African catfish, Clarias gariepinus (Burchell), using chromosome manipulation techniques

An experiment was conducted to induce triploidy in African catfish, Clarias gariepinus, using heat shock and cold shock techniques. Cold shock at a temperature of 0± 1°C and 5±1°C for a duration of 15, 30, 45 and 60 min and heat shock at a temperature of 40±0.5°C and 41 ±OS C for a duration of 1, 2 and 3 min was given to induce triploidy 5 min after fertilization. Maximum percentage of triploids (91.4%) were obtained in the heat shock at a temperature of 40±0SC for a duration of 1 min whereas cold shock at 0± 1 C for a duration of 60 min yielded 90% of triploids. Chromosome analysis revealed that diploids have 54 chromosomes and triploids have 81 chromosomes. The erythrocyte measurements of the minor axis and major axis were 1.17 times larger in treated fish than in controls. The growth studies showed that the growth rate was not significantly affected in triploids.

Development of artificial breeding techniques for long-whiskered catfish, Sperata aor and giant river catfish, Sperata seenghala of Bangladesh

Sperata aor and S. seenghala are the two important native catfishes of Bangladesh but commercial farming of these species is not possible due to lack of naturally collected or artificially produced seeds for stocking. Attempts were made to develop techniques for seed production by artificial breeding and nursery-rearing of fries of these catfishes. A total of 60 S. seenghala (750-1,500 g) and 10 S. aor (600-1,000 g) broods were collected from the Brahmaputra river-basin and floodplains in Mymensingh region four months prior to their breeding season. The collected brood fishes were reared in separate earthen ponds with supplementary feeds comprising of rice bran (40%), mustard oil cake (29%), fish meal (30%) and vitamin-premix (1 %). Three experiments were conducted to optimize the hormone dose. A total of nine S. seenghala females weighing from 750 to 1,500 g were given an initial and resolving dose of 12-20 and 16-24 mg PG/kg body weight, respectively. The males weighing from 650-950 g were administered a single dose of 18-26 mg PG/kg body weight at the time of the time of administering the resolving dose to the females. The females ovulated partially and the eggs were examined under a compound microscope, but most of them were found to be less ripe or damaged. Collection of milt by stripping the males was not successful. The testes were taken out and sperm were observed to be non-motile and less developed. In view of stimulating natural propagation of S. seenghala, artificial holes (nests) were constructed in the pond bottom. Each hole was 0.7 m in diameter and 0.3 m in depth. A total of 10 holes were made and then 10 pairs of S. seenghala breeders (800-1,200 g) were stocked in the pond. In mid February, 3,000 fry of S. seenghala with a mean length of 4.60 cm and weight of 0.36 g were collected by repeated netting followed by drying of the pond. The fry were then stocked in a nursery pond and fed with commercial feed (SABINCO starter-1). The average length and weight of the fingerlings were 9.01 cm and 3.95 g, respectively and the estimated survival was 60% after two months of rearing. S. aor did not respond to natural spawning. Further study is essential to develop techniques for their successful artificial and natural breeding.

Assessing seasonal precipitation trends in India using parametric and non-parametric statistical techniques

This paper provides an insight into the long-term trends of the four seasonal and annual precipitations in various climatological regions and sub-regions in India. The trends were useful to investigate whether Indian seasonal rainfall is changing in terms of magnitude or location-wise. Trends were assessed over the period of 1954-2003 using parametric ordinary least square fits and non-parametric Mann-Kendall technique. The trend significance was tested at the 95% confidence level. Apart from the trends for individual climatological regions in India and the average for the whole of India, trends were also specifically determined for the possible smaller geographical areas in order to understand how different the trends would be from the bigger spatial scales. The smaller geographical regions consist of the whole southwestern continental state of Kerala. It was shown that there are decreasing trends in the spring and monsoon rainfall and increasing trends in the autumn and winter rainfalls. These changes are not always homogeneous over various regions, even in the very short scales implying a careful regional analysis would be necessary for drawing conclusions regarding agro-ecological or other local projects requiring change in rainfall information. Furthermore, the differences between the trend magnitudes and directions from the two different methods are significantly small and fall well within the significance limit for all the cases investigated in Indian regions (except where noted). © 2010 Springer-Verlag.

Seed production and culture techniques of Genetically Improved Farmed Tilapia (GIFT) in brackishwater environment

Effects of different levels of salinity on survival, growth and gonadal development of Genetically Improved Farmed Tilapia (GIFT) were studied under laboratory conditions in glass aquarium, for a period of ten weeks. The initial individual size of the GIFT was 20.23±4.45 and the salinity levels tested were 0, 5, 10, 15 and 20 ppt. The highest survival of 87.5% was found in 0 ppt and the lowest 60.5% in 20 ppt. Though the survival decreased progressively with increased salinity, there were no significant differences (P>0.05) among 0, 5, and 10 ppt. Similar to what has been observed in survival, the specific growth rate (SGR %/day) also decreased as of 1.30, 1.24, 1.08, 0.90 and 0.71, respectively, with the increased salinity of 0, 5, 10, 15 and 20 ppt. The gonadal development was highest in 0 ppt with a GSI value of 3.75 and lowest of 2.01 in 20 ppt. In the second experiment, gonadal development and seed production performance of GIFT in brackishwater condition were investigated for a period of three months. Each of the three fine meshed hapas of 20 square meters made from nylon net was placed in a freshwater (0 ppt) and in a brackish water (10-15 ppt) pond of the Brackishwater Station (BS). GIFT of 65 g average weight from a single cohort were stocked into three hapas at a rate of 2 per m. The male vs female ratio was 1:3. The development of gonad was faster with the higher gonadosomatic index (GSI %) of 3.85 % in freshwater condition than that of 2.73 % in brackish water. Within three months of the study period, a total of 70,510 and 44,250 GIFT fry were produced respectively, in freshwater and brackishwater conditions. Finally under third experiment, a participatory on-farm trial was carried out to evaluate the production performance of GIFT in monoculture and in polyculture with silver barb in coastal freshwater pond conditions. Nine ponds were selected for three treatment combinations of GIFT monoculture (T1), GIFT and silver barb polyculture (T2), and silver barb monoculture (T3). The ponds have been stocked in April, 05 at a density of 25,000 fry per ha. Fishes were fed with rice bran at the rate of 6% bw per day. In one month culture period, GIFT attained an average weight of 16.27 g in monoculture and 17.23 g in polyculture, against an average stocking weight of 0.37 g. Silver barb reached an average weight of 16.62 g in polyculture with GIFT and 10.01 g in monoculture, against an average stocking weight of 3.79 g.

Seed production and culture techniques of climbing perch, Anabas testudineus

Six treatments each with 12 replications designed to optimize the dose of inducing agent PG to achieve fertilization and hatching success of climbing perch, Anabas testudineus were tested. The females were given single injection of 7-12 mg PG/kg body weight and the males were given 4 mg PG/kg body weight. Fertilization and hatching rate varied from 67±4.55% to 66±3.0% and 59±4.88% to 57±6.21% for the doses of 10, 11 and 12 mg PG/kg of body weight, respectively. The hormone dose had significant (P<0.05) effect on fertilization and hatching. Six mini shallow cisterns (570 cm x 105 cm) were used to investigate the efficacy of zooplankton and Artemia nauplii as feed for spawn rearing. Three-day old spawns were stocked in six mini shallow cisterns at a stocking density of 100 individuals/L of water. Two treatments each with three replications were used to develop culture technique of the climbing perch. In case of treatment-1, the spawns were fed with Artemia nauplii three times daily, while in treatment-2, zooplankton were used as feed in the same manner as in treatment-1. After 14 days of rearing, mean final weight of the fry of treatments-1 and 2 were 95.55±6.71 and 57.69±5.40 mg, respectively. In treatment-1, spawn fed with Artemia nauplii showed significantly (P<0.05) higher mean weight than the spawn fed with zooplankton (treatment 2).

Spiny lobsters and their fishing techniques

Scores of publications on spiny lobsters and their fishing techniques are available from various parts of the world. A variety of fishing gears which vary in design and operation are employed for exploiting lobsters. A review of the work carried out on spiny lobsters with special reference to their distribution, fishing gear, fishing methods, baits and crafts in India, Sri Lanka, United States, Australia, South Africa, United Kingdom, Ireland and Portugal based on selected literature are considered and discussed.