Forage dry mass accumulation and structural characteristics of Piatã grass in silvopastoral systems in the Brazilian savannah

2016

Creolo beans production systems in Juruá valley, Acre, Brazilian Amazon.

The Juruá valley mesoregion is recognized for its diversity of cultivars of common beans and cowpea and is an important center for on farm bean conservation in Brazil. However, there is little information about production systems of Creoles cultivars and, in this approach, the study aimed to identify the production centers and to gather information about beans production systems. Thirty eight farmers and five merchants were interviewed using semi-structured questionnaries. Juruá valley farmers use three beans production systems: "beach farming", "slash burn system" and "stuffy farming". The systems use family labor with low dependence on external inputs, two classified as itinerant. The study identified two beans production centers: Alto Juruá extractive reserve and Santa Luzia directed settlement project.

Analysis of the impact of stationary energy storage systems in trolleybus grids using Simulink-based modelling

The voltage profile of the catenary between traction substations (TSSs) is affected by the trolleybus current intake and by its position with respect to the TSSs: the higher the current requested by the bus and the further the bus from the TSSs, the deeper the voltage drop. When the voltage drops below 500V, the trolleybus is forced to decrease its consumption by reducing its input current. This thesis deals with the analysis of the improvements that the installation of an BESS produces in the operation of a particularly loaded FS of the DC trolleybus network of the city of Bologna. The stationary BESS is charged by the TSSs during off-peak times and delivers the stored energy when the catenary is overloaded alleviating the load on the TSSs and reducing the voltage drops. Only IMC buses are considered in the prospect of a future disposal of all internal combustion engine vehicles. These trolleybuses cause deeper voltage drops because they absorb enough current to power their traction motor and recharge the on board battery. The control of the BESS aims to keep the catenary voltage within the admissible voltage range and makes sure that all physical limitations are met. A model of FS Marconi Trento Trieste is implemented in Simulink environment to simulate its daily operation and compare the behavior of the trolleybus network with and without BESS. From the simulation without BESS, the best location of the energy storage system is deduced, and the battery control is tuned. Furthermore, from the knowledge of the load curve and the battery control trans-characteristic, it is formulated a prediction of the voltage distribution at BESS connection point. The prediction is then compared with the simulation results to validate the Simulink model. The BESS allows to decrease the voltage drops along the catenary, the Joule losses and the current delivered by the TSSs, indicating that the BESS can be a solution to improve the operation of the trolleybus network.

Planning and flexible operation of storage systems in power grids: from transmission to distribution networks

The first part of the thesis has been devoted to the transmission planning with high penetration of renewable energy sources. Both stationary and transportable battery energy storage (BES, BEST) systems have been considered in the planning model, so to obtain the optimal set of BES, BEST and transmission lines that minimizes the total cost in a power network. First, a coordinated expansion planning model with fixed transportation cost for BEST devices has been presented; then, the model has been extended to a planning formulation with a distance-dependent transportation cost for the BEST units, and its tractability has been proved through a case study based on a 190-bus test system. The second part of this thesis is then devoted to the analysis of planning and management of renewable energy communities (RECs). Initially, the planning of photovoltaic and BES systems in a REC with an incentive-based remuneration scheme according to the Italian regulatory framework has been analysed, and two planning models, according to a single-stage, or a multi-stage approach, have been proposed in order to provide the optimal set of BES and PV systems allowing to achieve the minimum energy procurement cost in a given REC. Further, the second part of this thesis is devoted to the study of the day-ahead scheduling of resources in renewable energy communities, by considering two types of REC. The first one, which we will refer to as “cooperative community”, allows direct energy transactions between members of the REC; the second type of REC considered, which we shall refer to as “incentive-based”, does not allow direct transactions between members but includes economic revenues for the community shared energy, according to the Italian regulation framework. Moreover, dispatchable renewable energy generation has been considered by including producers equipped with biogas power plants in the community.

Big data analysis systems in IoE environments for managing privacy and data protection: pseudonymity, de-anonymization and the right to be forgotten

The thesis represents the conclusive outcome of the European Joint Doctorate programmein Law, Science & Technology funded by the European Commission with the instrument Marie Skłodowska-Curie Innovative Training Networks actions inside of the H2020, grantagreement n. 814177. The tension between data protection and privacy from one side, and the need of granting further uses of processed personal datails is investigated, drawing the lines of the technological development of the de-anonymization/re-identification risk with an explorative survey. After acknowledging its span, it is questioned whether a certain degree of anonymity can still be granted focusing on a double perspective: an objective and a subjective perspective. The objective perspective focuses on the data processing models per se, while the subjective perspective investigates whether the distribution of roles and responsibilities among stakeholders can ensure data anonymity.

Distributed and synchronized measurements for the wide-area observation of electric power systems in distorted and low-inertia conditions

With the aim of heading towards a more sustainable future, there has been a noticeable increase in the installation of Renewable Energy Sources (RES) in power systems in the latest years. Besides the evident environmental benefits, RES pose several technological challenges in terms of scheduling, operation, and control of transmission and distribution power networks. Therefore, it raised the necessity of developing smart grids, relying on suitable distributed measurement infrastructure, for instance, based on Phasor Measurement Units (PMUs). Not only are such devices able to estimate a phasor, but they can also provide time information which is essential for real-time monitoring. This Thesis falls within this context by analyzing the uncertainty requirements of PMUs in distribution and transmission applications. Concerning the latter, the reliability of PMU measurements during severe power system events is examined, whereas for the first, typical configurations of distribution networks are studied for the development of target uncertainties. The second part of the Thesis, instead, is dedicated to the application of PMUs in low-inertia power grids. The replacement of traditional synchronous machines with inertia-less RES is progressively reducing the overall system inertia, resulting in faster and more severe events. In this scenario, PMUs may play a vital role in spite of the fact that no standard requirements nor target uncertainties are yet available. This Thesis deeply investigates PMU-based applications, by proposing a new inertia index relying only on local measurements and evaluating their reliability in low-inertia scenarios. It also develops possible uncertainty intervals based on the electrical instrumentation currently used in power systems and assesses the interoperability with other devices before and after contingency events.

Integration of ROS for the control of industrial robotic systems in a proprietary environment

The paper deals with the integration of ROS, in the proprietary environment of the Marchesini Group company, for the control of industrial robotic systems. The basic tools of this open-source software are deeply studied to model a full proprietary Pick and Place manipulator inside it, and to develop custom ROS nodes to calculate trajectories; speaking of which, the URDF format is the standard to represent robots in ROS and the motion planning framework MoveIt offers user-friendly high-level methods. The communication between ROS and the Marchesini control architecture is established using the OPC UA standard; the tasks computed are transmitted offline to the PLC, supervisor controller of the physical robot, because the performances of the protocol don’t allow any kind of active control by ROS. Once the data are completely stored at the Marchesini side, the industrial PC makes the real robot execute a trajectory computed by MoveIt, so that it replicates the behaviour of the simulated manipulator in Rviz. Multiple experiments are performed to evaluate in detail the potential of ROS in the planning of movements for the company proprietary robots. The project ends with a small study regarding the use of ROS as a simulation platform. First, it is necessary to understand how a robotic application of the company can be reproduced in the Gazebo real world simulator. Then, a ROS node extracts information and examines the simulated robot behaviour, through the subscription to specific topics.

Digitally Mediated Political Participation: Understanding the Democratic Impact of Internet Diffusion in the Asian Media Systems

Thesis (Ph.D.)--University of Washington, 2016-08

Differences in internet and LMS usage: a case study in higher education

The Internet plays an important role in higher education institutions where Learning Management Systems (LMS) occupies a main role in the eLearning realm. In this chapter we aim to characterize the Internet and LMS usage patterns and their role in the largest Portuguese Polytechnic Institute. The usage patterns were analyzed in two components: characterization of Internet usage and the role of Internet and LMS in education. Using a quantitative approach, the data analysis describes the differences between gender, age and scientific fields. The carried qualitative analysis allows a better understanding of students’ both motivations, opinions and suggestions of improvement. The outcome of this work is the presentation of the Portuguese students’ profile regarding Internet and LMS usage patterns. We expect that these results can be used to select the most suitable digital pedagogical processes and tools to be adopted regarding the learning process and most adequate LMS’s policies.

Nurses’ Acceptance of an Internet-Based Support System in The Care of Adolescents with Depression

The overall goal of the study was to describe nurses’ acceptance of an Internet-based support system in the care of adolescents with depression. The data were collected in four phases during the period 2006 – 2010 from nurses working in adolescent psychiatric outpatient clinics and from professionals working with adolescents in basic public services. In the first phase, the nurses’ anticipated perceptions of the usefulness of the Internet-based support system before its implementation was explored. In the second phase, the nurses’ perceived ease of computer and Internet use and attitudes toward it were explored. In the third phase, the features of the support system and its implementation process were described. In the fourth phase, the nurses’ experiences of behavioural intention and actual system use of the Internet-based support were described in psychiatric out-patient care after one year use. The Technology Acceptance Model (TAM) was used to structure the various research phases. Several benefits were identified from the nurses’ perspective in using the Internet-based support system in the care of adolescents with depression. The nurses’ technology skills were good and their attitudes towards computer use were positive. The support system was developed in various phases to meet the adolescents’ needs. Before the implementation of the information technology (IT)-based support system, it is important to pay attention to the nurses’ IT-training, technology support, resources, and safety as well as ethical issues related to the support system. After one year of using the system, the nurses perceived the Internet-based support system to be useful in the care of adolescents with depression. The adolescents’ independent work with the support system at home and the program’s systematic character were experienced as conducive from the point of view of the treatment. However, the Internet-based support system was integrated only partly into the nurseadolescent interaction even though the nurses’ perceptions of it were positive. The use of the IT-based system as part of the adolescents’ depression care was seen positively and its benefits were recognized. This serves as a good basis for future IT-based techniques. Successful implementations of IT-based support systems need a systematic implementation plan and commitment from the part of the organization and its managers. Supporting and evaluating the implementation of an IT-based system should pay attention to changing the nurses’ work styles. Health care organizations should be offered more flexible opportunities to utilize IT-based systems in direct patient care in the future.

User Generated Content in Researching for Design: How the Internet Supports Creativity

Résumé Cette recherche a débuté avec l’idée que l’Internet est en train de changer la manière dont nous créons des connaissances et du contenu culturel. Notre point de départ était d’utiliser l’Internet afin de rassembler et amplifier plusieurs points de vue dans un processus de design. Une approche complexe a exposé l’Internet comme un système et conséquemment comme une plateforme pour l’innovation. La structure ouverte de l’Internet a soutenu le mouvement participatif des usagers qui ont choisi de partager leurs besoins, leurs désirs et leurs solutions. Notre recherche a pour but d’étudier ce contenu généré par les usagers en ligne et comprendre sa valeur pour les designers. Les usagers créatifs veulent s’exprimer et participer activement dans le processus de design. Notre recherche tente de démontrer que les designers ont beaucoup à apprendre du contenu généré par les usagers car ceux-ci soumettent des éléments qui ont attrait à toutes les étapes du processus de design et révèlent des relations présentes dans la situation de design à l’étude. Pour en apprendre plus sur ce contenu nous nous demandons : Quel type d’information offre le contenu généré par les usagers pour la phase de recherche dans le processus de design. Afin de centrer la portée de l’étude, nous nous sommes aussi questionné si cette information est plus pertinente au design de produits, au design de services ou au design de système de produits et de services. Aspirant aux idéaux du design participatif, notre méthodologie fut développée afin d’apprendre comment le contenu généré par les usagers pourrait influencer le processus de design. Pour ce faire, nous avons choisi de chercher sur l’Internet pour du contenu qui concerne la mobilité via l’usage d’une automobile. Les trois différents types de média considérés étaient les vidéos sur YouTube, les images sur Flickr et les textes sur Blogger. Afin de répondre à notre première question de recherche, nous nous sommes penchés sur deux éléments lorsque l’on recherche pour le design : les espaces de design et les relations de design. Premièrement, nous avons catégorisé le contenu récolté selon l’espace problème, créatif et solution. Deuxièmement, nous avons catégorisé le contenu dépendant de laquelle des relations de design elle démontrait soit une combinaison d’usagers, objets et contextes. Dans le but de répondre à la deuxième question de cette recherche, nous avons examiné trois types V de produits de design : les automobiles privées comme produit, le partage de voiture comme système de produit et de service, et le taxi comme service. Chaque élément pertinent généré par les usagés trouvé dans cette recherche fut catégorisé jusqu’à ce que l’on récolte 50 échantillons pour chaque combinaison de ces variables. Nous en sommes arrivés avec une matrice de 50 éléments de chaque produit de design, pour chacun des médias, puis catégorisé selon les espaces de design et les relations dans le design. Cette recherche démontre que l’Internet, comme médium, produit les conditions avantageuses pour que les usagers partagent de grandes quantités de contenu original et diversifié qui est pertinent aux situations de design. À partir de nos données de recherche, nous avons identifié des tendances dans le contenu généré par les usagers. Notamment, nous sommes en mesure d’affirmer que le contenu généré par les usagers offre de l’information pertinente à la recherche pour le design, et ce dans tous les espaces de design et toutes les relations de design. Il en fut de même pour les différentes issues du design car du contenu sur les produits, les systèmes de produits et de services et les services était présent et pertinent. Bref, nous avons démontré que l’Internet supporte la créativité et conséquemment il y abonde de contenu créatif produit par les usagers. Suivant dans les traces dessinées par d’autres chercheurs en design participatif, cette étude devrait être considérée comme un nouvel exemple des moyens qu’ont les designers pour percevoir les besoins tacites des usagers en leur permettant d’exprimer leurs idées. Alors que ceux-ci créent librement et intuitivement ainsi exposant leurs besoins, solutions et idées, les designers peuvent porter un regard de tierce partie sur les résultats. Jumelant des techniques comme le crowdsourcing et le brainstorming, nous avons créé une nouvelle activité et le néologisme : brainsourcing. En demeurant dans une forme de pratique réflexive, les designers peuvent réfléchir et ajouter au contenu généré par les usagers qui lui n’est pas biaisé par une éducation ou une culture du design. Ce processus est similaire au design participatif professionnel où le brainsourcing est une activité parallèle lorsque le designer fait des recherches pour le design. C’est cette perspective sur la somme des idées des participants qui peut contribuer à comprendre la complexité de la situation de design. VI Cette recherche a aussi soulevé des questions par rapport à l’effet de démocratisation de l’Internet. Bien que les usagers n’ont pas l’éducation, ni les habiletés des designers, ils aspirent à démocratiser le processus du design en voulant participer activement et en exposant leurs besoins, idées et solutions. Nous avons pu déterminer que les usagers n’étaient pas qualifiés pour entreprendre le processus complet du design comme les designers professionnels, mais nous avons observé directement la capacité des usagers à mettre de l’avant leur créativité. À propos de la relation entre les usagers créatifs et les designers, nous avons étudié des langages communs tels les scénarios et les prototypes. Tous deux sont présents dans le contenu généré par les usagers que nous avons récolté dans nos recherches sur Internet. Ceci nous a mené vers une nouvelle perspective sur l’activité du design où des opportunités créatives ressortent d’une conversation avec les usagers. Cette recherche a dévoilé de grandes tendances dans la manière dont les usagers communiquent naturellement dans un processus de design. Nous espérons avoir offert un aperçu de comment les designers peuvent prendre avantage de tous les types de contenu généré par les usagers en ligne. Dans le futur, nous souhaitons que les designers aient la possibilité d’interagir avec les participants en prenant le rôle de facilitateur de la conversation. La responsabilité du résultat ne tombe pas sur les épaules du designer car son mandat est d’assurer le bon fonctionnement du processus. Les designers rejoignent les usagers en ne demandant plus comment les choses peuvent être créées, mais pourquoi elles devraient exister. En tant que designers, nous aspirons à générer plus à partir de nouvelles connaissances, nous aspirons à créer plus de sens. Mots clés: Recherche en design, complexité, design participatif, contenu généré par les usagers, démocratisation, Internet, créativité, crowdsourcing, brainstorming, brainsourcing, réflexion-en-action.

Compositional evolution with mass transfer in closed systems

Evolution of compositions in time, space, temperature or other covariates is frequent in practice. For instance, the radioactive decomposition of a sample changes its composition with time. Some of the involved isotopes decompose into other isotopes of the sample, thus producing a transfer of mass from some components to other ones, but preserving the total mass present in the system. This evolution is traditionally modelled as a system of ordinary di erential equations of the mass of each component. However, this kind of evolution can be decomposed into a compositional change, expressed in terms of simplicial derivatives, and a mass evolution (constant in this example). A rst result is that the simplicial system of di erential equations is non-linear, despite of some subcompositions behaving linearly. The goal is to study the characteristics of such simplicial systems of di erential equa- tions such as linearity and stability. This is performed extracting the compositional dif ferential equations from the mass equations. Then, simplicial derivatives are expressed in coordinates of the simplex, thus reducing the problem to the standard theory of systems of di erential equations, including stability. The characterisation of stability of these non-linear systems relays on the linearisation of the system of di erential equations at the stationary point, if any. The eigenvelues of the linearised matrix and the associated behaviour of the orbits are the main tools. For a three component system, these orbits can be plotted both in coordinates of the simplex or in a ternary diagram. A characterisation of processes with transfer of mass in closed systems in terms of stability is thus concluded. Two examples are presented for illustration, one of them is a radioactive decay

Energy Efficiency Issues in Information-Centric Networking

In this paper we address energy efficiency issues of Information Centric Networking (ICN) architectures. In the proposed framework, we investigate the impact of ICN architectures on energy consumption of networking hardware devices and compare them with the energy consumption of other content dissemination methods. In particular, we investigate the consequences of caching in ICN from the energy efficiency perspective, taking into account the energy consumption of different hardware components in the ICN architectures. Based on the results of the analysis, we address the practical issues regarding the possible deployment and evolution of ICN from an energy-efficiency perspective. Finally, we summarize our findings and discuss the outlook/future perspectives on the energy efficiency of Information-Centric Networks.

Load Balancing in LTE Mobile Networks with Information-Centric Networking

Mobile networks usage rapidly increased over the years, with great consequences in terms of performance requirements. In this paper, we propose mechanisms to use Information-Centric Networking to perform load balancing in mobile networks, providing content delivery over multiple radio technologies at the same time and thus efficiently using resources and improving the overall performance of content transfer. Meaningful results were obtained by comparing content transfer over single radio links with typical strategies to content transfer over multiple radio links with Information-Centric Networking load balancing. Results demonstrate that Information-Centric Networking load balancing increases the performance and efficiency of 3GPP Long Term Evolution mobile networks while greatly improving the network perceived quality for end users.