Treating the entire person

[Excerpt] A critical case from a Portuguese hospital reveals how the ultimate healthcare customer, the patient, is a complete system, not a jumble of parts. (...) The lean production philosophy has made inroads into service sectors, including medical care in the United Kingdom and the United States. Unfortunately, numerous medical organizations in those two countries and the rest of the world treat patients like they are made up of parts, not as a whole system. This leads to disjointed handoffs, bottlenecks in information flow that delay treatment, and sending the patient back and forth from department to department. The following case in Portugal shows how most of the world’s health systems still suffer from functional silos and how waste is all over the place. In this case, the missing links in communication between doctors, nurses, auxiliary staff, the patient and her family led to the patient’s death. Adopting lean healthcare with its proven tools would be a solution to many of the problems described. When a patient dies in a hospital, the family often is told that the doctors did everything they could. Normally, that is the case, as healthcare providers – doctors, nurses, auxiliary staff, therapists – do their best with the system they have.

Upgrade of an industrial building: BIM model of the as-built situation and evaluation of modifications

Dissertação de mestrado integrado in Civil Engineering

Influence of chitosan coating on protein-based nanohydrogels properties and in vitro gastric digestibility

Chitosan coating was applied in Lactoferrin (Lf)-Glycomacropeptide (GMP) nanohydrogels by layer-by-layer coating process. A volume ratio of 0.1 of Lf-GMP nanohydrogels (0.2 mg.mL-1, at pH 5.0) to chitosan (1 mg.mL-1, at pH 3) demonstrated to be the optimal condition to obtain stable nanohydrogels with size of 230 ± 12 nm, a PdI of 0.22 ± 0.02 and a -potential of 30.0 ± 0.15 mV. Transmission electron microscopy (TEM) images showed that the application of chitosan coating in Lf-GMP did not affect the spherical shape of nanohydrogels and confirmed the low aggregation of nanohydrogels in solution. The analysis of chemical interactions between chitosan and Lf-GMP nanohydrogels were performed by Fourier transform infrared spectroscopy (FTIR) and by circular dichroism (CD) that revealed that a specific chemical interaction occurring between functional groups of protein-based nanohydrogels and active groups of the chitosan was established. The effect of chitosan coating on release mechanisms of Lf-GMP nanohydrogels at acid conditions (pH 2, 37 ºC) was evaluated by the encapsulation of a model compound (caffeine) in these systems. Linear Superposition Model was used to fit the experimental data and revealed that Fick and relaxation mechanisms are involved in caffeine release. It was also observed that the Fick contribution increase with the application of chitosan coating. In vitro gastric digestion was performed with Lf-GMP nanohydrogels and Lf-GMP nanohydrogels with chitosan coating and it was observed that the presence of chitosan improve the stability of Lf and GMP (proteins were hydrolysed at a slower rate and were present in solution by longer time). Native electrophoreses revealed that the nanohydrogels without coating remained intact in solution until 15 min and with chitosan coating remained intact until 60 min, during gastric digestion.

Feasibility of internally stiffened thin-walled beams for industrial applications

Several types of internally reinforced thin-walled beams are subjected to a feasibility evaluation of its mechanical behavior for industrial applications. The adapting of already existing efficient sandwich geometries to hollow-box beams of larger dimensions may reveal promising results. Novel types of sandwich beams under bending and torsion uncoupled loadings are studied in terms of stiffness behavior in static analysis. For the analysis of the solutions, the models are built using the Finite Element Method (FEM) software ANSYS Mechanical APDL. The feasibility of the novel beams was determined by the comparison of the stiffness behavior of the novel hollow-box beams with conventional hollow-box beams. An efficiency parameter was defined in order to determine the feasibility. It is found that the novel geometries represent an excellent improvement under bending loadings, better than under torsion loadings. Nevertheless, for bending and torsion combined loadings, if bending loads are predominant, the beams can still be interesting for some applications, in particular those with mobile parts.

A UML-based approach for modeling industrial control applications

The main purpose of the poster is to present how the Unified Modeling Language (UML) can be used for diagnosing and optimizing real industrial production systems. By using a car radios production line as a case study, the poster shows the modeling process that can be followed during the analysis phase of complex control applications. In order to guarantee the continuity mapping of the models, the authors propose some guidelines to transform the use cases diagrams into a single object diagram, which is the main diagram for the next phases of the development.

Valorization of agro-industrial wastes towards the production of rhamnolipids

In this work, oil mill wastewater (OMW), a residue generated during olive oil extraction, was evaluated as an inducer of rhamnolipid production. Using a medium containing as sole ingredients corn steep liquor (10%, v/v), sugarcane molasses (10%, w/v) and OMW (25%, v/v), Pseudomonas aeruginosa #112 produced 4.5 and 5.1 g of rhamnolipid per liter in flasks and reactor, respectively, with critical micelle concentrations as low as 13 mg/l. Furthermore, in the medium supplemented with OMW, a higher proportion of more hydrophobic rhamnolipid congeners was observed comparing with the same medium without OMW. OMW is a hazardous waste which disposal represents a serious environmental problem; therefore, its valorization as a substrate for the production of added-value compounds such as rhamnolipids is of great interest. This is the first report of rhamnolipid production using a mixture of these three agro-industrial by-products, which can be useful for the sustainable production of rhamnolipids.

Avaliação de projetos de eficiência energética na iluminação pública

Dissertação de mestrado em Engenharia Industrial

Horário por turnos : análise do seu efeito numa empresa do sector industrial

O presente estudo teve por objetivo analisar os possíveis efeitos do trabalho por turnos, incluindo o turno noturno, a nível da saúde, vida familiar e social, numa empresa do sector da indústria. Foi construído um questionário que abordava questões relativas aos dados sociodemográficos, organização temporal do trabalho, qualidade do sono, exigências da tarefa e envolvimento, saúde, vida familiar e social, e posteriormente foi aplicado a uma amostra de 24 trabalhadores com idades entre os 29 e os 52 anos (41,58±5,79 anos). Os resultados mostram uma tendência para doenças como a obesidade, colesterol elevado e manifestação de sintomas relacionados com problemas digestivos nos trabalhadores que trabalham por turnos à [sic] mais anos. Antes do primeiro turno noturno o tempo de sono é bastante reduzido e fica aquém do tempo que os trabalhadores sentem que necessitam dormir para se sentirem bem. O turno da tarde é o que permite os trabalhadores ficarem com um tempo de sono mais próximo desse “ideal”. Em relação à idade, todos os trabalhadores do grupo etário mais velho manifestam interrupções do sono diurno. Também se verifica um maior descontentamento destes trabalhadores com o tempo livre para realizar atividades que tragam bem-estar. Este estudo contribui para o conhecimento da realidade do trabalho por turnos na indústria e espera-se que desperte a procura de soluções que otimizem a vida destes trabalhadores.

Desarrollo de un secadero industrial modular portable para productos cárnicos.

Las etapas de estufado y secado en la elaboración de los productos cárnicos de humedad intermedia (0,90 – 0,80 aw) son críticas para alcanzar la auto estabilidad y, en consecuencia, la seguridad de estos alimentos. Poder controlar las variables (temperatura, humedad, velocidad de aire, etc.) de estas operaciones del proceso es determinante para lograr una fermentación y un secado adecuado que permitirán estandarizar el proceso, garantizar la inocuidad y prolongar la vida útil del producto. La construcción de un secadero automatizado que cuente con los últimos adelantos en ingeniería y electrónica resulta dificultoso en las pequeñas y medianas empresas cárnicas, no solo por los altos costos que hay que cubrir, sino además porque las dimensiones de estas pequeñas fábricas no cuentan, en muchos casos, con la escala comercial necesaria para afrontarlos. A través del proyecto se pretende diseñar y construir una unidad de estufado y maduración que sea aplicable al procesamiento de fabricación de embutidos fermentados, que permita su utilización como unidad móvil y que al mismo tiempo pueda emplearse como unidad experimental para complementar otros proyectos de investigación en el área de productos cárnicos. El desarrollo de un secadero modular portable permitirá, además de ofrecer un paquete tecnológico que garantizará la calidad y seguridad de los alimentos producidos, brindar un servicio de alquiler de secaderos para pequeños productores que no disponen del capital suficiente para realizar grandes inversiones o cuya producción es acotada en cantidad o en determinadas épocas del año.

EVALUACIÓN DE FITOREMEDIACIÓN DE SUELOS CONTAMINADOS CON PLOMO POR ACTIVIDAD INDUSTRIAL UTILIZANDO RYE GRASS EN DIVERSOS MEDIOS DE CULTIVO.

El desarrollo de actividades industriales, contribuye cada vez más a la generación de residuos con elementos potencialmente tóxicos que en concentraciones altas (fijadas por ley nacional 24051) pueden tener efectos nocivos a la salud de la población y afectaciones al equilibrio ecológico y el ambiente. Hoy existen estudios tendientes a resolver la contaminación originada por metales pesados en suelos, mediante estrategias basadas en el uso de plantas que tienen la propiedad de acumular metales pesados; proceso denominado “fitoremediación” que consiste en la remoción, transferencia, estabilización y/o degradación y neutralización de compuestos orgánicos, inorgánicos y radioactivos que resultan tóxicos en suelos y agua. Esta novedosa tecnología tiene como objetivo degradar y/o asimilar, los metales pesados, presentes en el suelo, lo cual tiene muchas ventajas con respecto a los métodos convencionales de tratamientos de lugares contaminados; en 1º lugar es una tecnología económica, de bajo costo, en 2º lugar posee un impacto regenerativo en lugares en donde se aplica y en 3º lugar su capacidad extractiva se mantiene debido al crecimiento vegetal (Harvey et al., 2002). La fitoremediación no es un remedio para todos los suelos contaminados y antes que esta tecnología pueda volverse técnicamente eficiente y económicamente viable, hay algunas limitaciones que necesitan ser superadas como por ejemplo la falta de pruebas a escala industrial (Freitas et al., 2004). Para la realización del trabajo se utilizarán las instalaciones de la empresa FACSA S.A ubicada en Avda. De las Quintas y De los Hornos de barrio villa Esquiú de Córdoba, empresa operadora de residuos de plomo autorizada por la Secretaría de Ambiente de la Provincia de Córdoba. Se utilizarán dos hectáreas de terreno de la empresa en la que se acumulará un máximo 1 metro cúbico por cada metro cuadrado de superficie. Previamente al deposito de suelo contaminado, el terreno será impermeabilizado con suelo cemento y cal para evitar lixiviaciones de plomo y luego se cercará para evitar ingreso de personal no autorizado. En las hectáreas preparadas se aplicarán capas sucesivas de suelo contaminado con suelo natural en la mitad del terreno y en la otra mitad capaz sucesivas de suelo contaminado y suelo fertilizado con lombricompuesto, ambos sectores serán sembrados con pasto Rye Grass. Durante el proceso se medirá la concentración de Pb por FRX cada tres meses, en tres profundidades para cada preparados de campo. Las muestras serán compuestas y se corresponderán a un mínimo de 5 puntos para cada profundidad. Lo mismo se realizará para medir la concentración de Pb en el pasto. Las cosechas o cortes de pasto serán trimestrales y el pasto cortado se recogerá, secará e incinerará en el propio horno de FACSA S.A. Se evaluarán las siguientes variables. Salinidad: Se realizará antes y al final del año, tomando muestras compuestas de 100g de suelo c/u a las cuales se le agregarán 100 ml de agua destilada, se deja reposar y luego se toma la lectura con la ayuda de un conductímetro calibrado. Acumulación de Pb en tejido vegetal: Se considerará como variable principal la acumulación de Pb en tejido vegetal, ya que integra tanto el grado de absorción del metal por las plantas, así como el efecto negativo que las concentraciones excesivas del metal sobre la producción de materia seca. Para el estudio de esta variable, se captarán y prepararán muestras trimestrales. Secado y protocolo para el análisis de Pb por FRX. Pb en Suelo:Esta variable se examinará trimestralmente, mediante mezcla compuesta de cada sector tomada como mínimo en cinco puntos. Se tomarán muestras a tres profundidades distintas. Ph en Suelo:Se tomarán partes de las muestras para análsis de ph. El experimento culminará a los dos años con análisis de las 9 tandas de mediciones (La 1º corresponde a la determinación de la línea de base). Se realizará la prospección para determinar el momento de perfecta recuperación del suelo.

A Wireless Mesh Network NS-3 Simulation Model: Implementation and Performance Comparison With a Real Test-Bed

Wireless mesh networks present an attractive communication solution for various research and industrial projects. However, in many cases, the appropriate preliminary calculations which allow predicting the network behavior have to be made before the actual deployment. For such purposes, network simulation environments emulating the real network operation are often used. Within this paper, a behavior comparison of real wireless mesh network (based on 802.11s amendment) and the simulated one has been performed. The main objective of this work is to measure performance parameters of a real 802.11s wireless mesh network (average UDP throughput and average one-way delay) and compare the derived results with characteristics of a simulated wireless mesh network created with the NS-3 network simulation tool. Then, the results from both networks are compared and the corresponding conclusion is made. The corresponding results were derived from simulation model and real-worldtest-bed, showing that the behavior of both networks is similar. It confirms that the NS-3 simulation model is accurate and can be used in further research studies.