Modelling the influence of land-use changes on biophysical and biochemical interactions at regional and global scales

Land-use changes since the start of the industrial era account for nearly one-third of the cumulative anthropogenic CO2 emissions. In addition to the greenhouse effect of CO2 emissions, changes in land use also affect climate via changes in surface physical properties such as albedo, evapotranspiration and roughness length. Recent modelling studies suggest that these biophysical components may be comparable with biochemical effects. In regard to climate change, the effects of these two distinct processes may counterbalance one another both regionally and, possibly, globally. In this article, through hypothetical large-scale deforestation simulations using a global climate model, we contrast the implications of afforestation on ameliorating or enhancing anthropogenic contributions from previously converted (agricultural) land surfaces. Based on our review of past studies on this subject, we conclude that the sum of both biophysical and biochemical effects should be assessed when large-scale afforestation is used for countering global warming, and the net effect on global mean temperature change depends on the location of deforestation/afforestation. Further, although biochemical effects trigger global climate change, biophysical effects often cause strong local and regional climate change. The implication of the biophysical effects for adaptation and mitigation of climate change in agriculture and agroforestry sectors is discussed. center dot Land-use changes affect global and regional climates through both biochemical and biophysical process. center dot Climate effect from biophysical process depends on the location of land-use change. center dot Climate mitigation strategies such as afforestation/reforestation should consider the net effect of biochemical and biophysical processes for effective mitigation. center dot Climate-smart agriculture could use bio-geoengineering techniques that consider plant biophysical characteristics such as reflectivity and water use efficiency.

Biodiesel Exhaust Treatment with Dielectric Barrier Discharges Coupled with Industrial Waste Byproducts

Biodiesel run engines are gaining popularity since the last few years as a viable alternative to conventional petro-diesel based engines. In biodiesel exhaust the content of volatile organic compounds, oil mist, and mass of particulate matter is considerably lower. However, the concentration of oxides of nitrogen (NOx) is relatively higher. In this paper the biodiesel exhaust from a stationary engine is treated under controlled laboratory conditions for removal of NOx using dielectric barrier discharge plasma in cascade with adsorbents prepared from abundantly available industrial waste byproducts like red mud and copper slag. Results were compared with gamma-alumina, a commercial adsorbent. Two different dielectric barrier discharge (DBD) reactors were tested for their effectiveness under Repetitive pulses /AC energization. NOx removal as high as 80% was achieved with pulse energized reactors when cascaded with red mud as adsorbent.

Effective Degradation of Aqueous Nitrobenzene Using the SrFeO3-delta Photocatalyst under UV Illumination and Its Kinetics and Mechanistic Studies

In this article, the SrFeO3-delta photocatalyst was synthesized by a solution combustion method and applied for the photocatalytic degradation of aqueous nitrobenzene in the presence and absence of H2O2. The SrFeO3-delta photocatalyst was characterized by XRD, FT-IR, FE-SEM, TEM, TG-DTG, XPS, and UV visible spectroscopy. The band gap energy of SrFeO3-delta was found to be 3.75 eV which lies in the UV region. The XPS results indicate that the oxidation state of Sr and Fe in SrFeO3-delta was 2+ and 3+, respectively, and the surface atomic ratio of Sr and Fe is 0.995. The photocatalytic activity reveals that the degradation of nitrobenzene over the SrFeO3-delta catalyst itself (UV/SFO) is superior compared to SrFeO3-delta in the presence of H2O2 (UV/SFO/H2O2) with a degradation efficiency of 99-96%. The degradation of nitrobenzene obeys first-order kinetics in both UV/SFO and UV/SFO/H2O2 processes. The decrease in degradation efficiency with UV/SFO/H2O2 was attributed due to the formation of strontium carbonate on the photocatalyst surface.

Biodiesel Exhaust Treatment with HFAC Plasma supported by Red Mud: Study on DeNOx and power consumption

The concentration of Nitrogen Oxides (NOx) in engines which use biodiesel as fuel is higher compared to conventional diesel engine exhaust. In this paper, an attempt has been made to treat this exhaust using a combination of High frequency AC (HFAC) plasma and an industrial waste, Red Mud which shows proclivity towards Nitrogen dioxide (NO2) adsorption. The high frequency AC source in combination with the proposed compact double dielectric plasma reactors is relatively more efficient in converting Nitric Oxide (NO) to NO2. It has been shown that the plasma treated gas enhances the activity of red mud as an adsorbent/catalyst and about 60-72% NOx removal efficiency was observed at a specific energy of 250 J/L. The advantage in this method is the cost effectiveness and abundant availability of the waste red mud in the industry. Further, power estimation studies were carried out using Manley's equation for the two reactors employed in the experiment and a close agreement between experimental and predicted powers was observed. (C) 2015 The Authors. Published by Elsevier Ltd.

GROUND COOLING SYSTEM FOR IMPROVING THE EFFICIENCY OF LOW TEMPERATURE POWER GENERATION

This paper presents an analysis of an organic Rankine cycle (ORC) with dry cooling system aided by an earth-coupled passive cooling system. Several organic fluids were considered as working fluids in the ORC in the temperature range of 125-200 degrees C. An earth-air-heat-exchanger (EMU) is studied for a location in the United States (Las Vegas) and another in India (New Delhi), to pre cool the ambient air before entering an air-cooled condenser (ACC). It was observed that the efficiency of the system improved by 1-3% for the system located in Las Vegas and fluctuations associated with temperature variations of the ambient air were also reduced when the EAHE system was used. A ground-coupled heat pump (GCHP) is also studied for these locations where cooling water is pre cooled in an underground buried pipe before entering a condenser heat exchanger in a closed loop. The area of the buried pipe and the condenser size are calculated per kW of power generation for various working fluids.

New physical insights into the electromagnetic shielding efficiency in PVDF nanocomposites containing multiwall carbon nanotubes and magnetic nanoparticles

This work attempts to bring critical insights into the electromagnetic shielding efficiency in polymeric nanocomposites with respect to the particle size of magnetic nanoparticles added along with or without a conductive inclusion. To gain insight, various Ni-Fe (NixFe1-x; x = 10, 20, 40; Ni: nickel, Fe: iron) alloys were prepared by a vacuum arc melting process and different particle sizes were then achieved by a controlled grinding process for different time scales. Poly(vinylidene fluoride), PVDF based composites involving different particle sizes of the Ni-Fe alloy were prepared with or without multiwall carbon nanotubes (MWNTs) by a wet grinding approach. The Ni-Fe particles were thoroughly characterized with respect to their microstructure and magnetization; and the electromagnetic (EM) shielding efficiency (SE) of the resulting composites was obtained from the scattering parameters using a vector network analyzer in a broad range of frequencies. The saturation magnetization of Ni-Fe nanoparticles and the bulk electrical conductivity of PVDF/Ni-Fe composites scaled with increasing particle size of NiFe. Interestingly, the PVDF/Ni-Fe/MWNT composites showed a different trend where the bulk electrical conductivity and SE scaled with decreasing particle size of the Ni-Fe alloy. A total SE of similar to 35 dB was achieved with 50 wt% of Ni60Fe40 and 3 wt% MWNTs. More interestingly, the PVDF/Ni-Fe composites shielded the EM waves mostly by reflection whereas, the PVDF/Ni-Fe/MWNT shielded mostly by absorption. A minimum reflection loss of similar to 58 dB was achieved in the PVDF/Ni-Fe/MWNT composites in the X-band (8-12 GHz) for a particular size of Ni-Fe alloy nanoparticles. This study brings new insights into the EM shielding efficiency in PVDF/magnetic nanoparticle based composites in the presence and absence of conducting inclusion.

A self-assembling polycationic nanocarrier that exhibits exceptional gene transfection efficiency

The lack of an efficient and safe carrier is a major impediment in the field of gene therapy. Although gelatin (GT), a naturally derived polymer, is widely used in drug delivery applications, it is unable to bind DNA efficiently. In this study, a novel polycationic gene carrier was prepared by conjugation of low molecular weight polyethyleneimine (LPEI) with GT through 4-bromonaphthaleic anhydride as a coupling agent to avoid self crosslinking. Self-assembly of LPEI conjugated GT (GT-LPEI) with plasmid DNA (pDNA) yielded nanoparticles with high gene complexation ability to form similar to 250 nm cylindrical nanoparticles with a zeta potential of similar to 27 mV. GT-LPEI showed exceptionally high transfection efficiency (> 90%) in various mammalian cells including primary stem cells with minimal cytotoxicity. The transfection efficiency of GT-LPEI significantly surpassed that of many commercial reagents. The high gene transfection expression was confirmed in vivo. Thus, GT-LPEI is shown to be a promising nonviral carrier for potential use in gene therapy.

Plasmon-mediated emergence of collective emission and enhanced quantum efficiency in quantum dot films

We present experimental and theoretical results on monolayer colloidal cadmium selenide quantum dot films embedded with tiny gold nanoparticles. By varying the density of the embedded gold nanoparticles, we were able to engineer a plasmon-mediated crossover from emission quenching to enhancement regime at interparticle distances for which only quenching of emission is expected. This crossover and a nonmonotonic variation of photoluminescence intensity and decay rate, in experiments, is explained in terms of a model for plasmon-mediated collective emission of quantum emitters which points to the emergence of a new regime in plasmon-exciton interactions. The presented methodology to achieve enhancement in optical quantum efficiency for optimal doping of gold nanoparticles in such ultrathin high-density quantum dot films can be beneficial for new-generation displays and photodetectors.

Incidencia de Cysticercus bovis en la matanza industrial de Nicaragua

En este trabajo, se analizó la situación existente con respecto a la Cysticercosis bovina, en la Empresa Julio Moneada Tercero, ubicada en el Km 11 carretera Norte, departamento de Managua; Esta Empresa cubre el 33% de la matanza industrial en Nicaragua. Con los datos recabados se Evaluaron: Niveles de infestación de los años 1984, 1985, 1988 y 1989; se determinó la infestación por categorías; EL departamento de mayor incidencia; Y las pérdidas económicas. Para el análisis estadístico, el método utilizado fue el de mínimos cuadrados generalizado, usando el procedimiento CATMOD del paquete statistical Analisis System. Los resultados obtenidos en el Análisis de varianza, demuestran que existen diferencias significativas entre años, con un nivel de significancia de P< 0.05 obteniéndose 1.24% de infestación global para los cuatro años, así como también existen diferencias significativas para las diferentes categorías (P< 0.05), siendo la categoría vaca (C2) la más afectada. Matagalpa resultó ser el departamento con el mayor número de animales parasitados seguido de Boaco, Managua y León. Las pérdidas económicas revelan cifras aproximadas de US$ 109,121.50 (ciento nueve mil ciento veinte y un dólares con cincuenta centavos) para el productor, adicionando a esto, las divisas no captadas por un monto aproximado de US$ 653,511.07 (seiscientos cincuenta y tres mil quinientos once dólares con siete centavos) por disminución de las exportaciones.

Residuos de plaguicidas en carne bovina de exportación en el Matadero Industrial Amerrisque

El presente trabajo se realizó en el matadero Amerrisque ubicado a la altura del km 128 carretera el Rama a 130 metros sobre e1 nivel del mar con el objetivo de evaluar los residuos de plaguicidas en carne bovina de exportación. Los datos fueron recopilados de la matanza diaria realizada en dicho matadero a partir del mes de enero de 1987 al mes de diciembre de 1992 a excepción de los meses de marzo, abril, agosto y noviembre del año 1989, de igual forma el año 1990, debido a que los registros ya para este año se encontraron incompletos. Las variables en estudio fueron: Niveles de contaminación aceptable y no aceptable para la exportación, procedencia de dichas carnes, plaguicidas que mayormente se acumulan en 1a carne y las pérdidas económicas. El procedimiento analítico se realizó por medio de una distribución de frecuencias, se hizo uso de medias como estadística descriptiva y también se determinó el rango. Como resultado del presente estudio observamos que la matanza industrial efectuada para los cinco años en estudio fue de 142,919 cabezas, de éstas 18,434 resultaron contaminada con un promedio de contaminación de 0.059 partes por millón, dejándose de percibir USA $ 10,497 dólares.

High photoluminescence quantum efficiency InGaN multiple quantum well structures emitting at 380 nm

In this paper we report the design of high room temperature photoluminescence internal efficiency InGaN-based quantum well structures emitting in the near ultraviolet at 380 nm. To counter the effects of nonradiative recombination the quantum wells were designed to have a large indium fraction, high barriers, and a small quantum well thickness. To minimize the interwell and interbarrier thickness fluctuations we used Al0.2In0.005Ga0.795N barriers, where the inclusion of the small fraction of indium was found to lead to fewer structural defects and a reduction in the layer thickness fluctuations. This approach has led us to achieve, for an In0.08Ga0.92N/Al0.2In0.005Ga0.795N multiple quantum well structure with a well width of 1.5 nm, a photoluminescence internal efficiency of 67% for peak emission at 382 nm at room temperature. (c) 2007 American Institute of Physics.

Optical and micro-structural properties of high photoluminescence efficiency InGaN/AlInGaN quantum well structures

We have studied the optical properties of a series of InGaN/AlInGaN 10-period multiple quantum wells (MQW) with differing well thickness grown by metal-organic vapor-phase epitaxy that emit at around 380 nm. The aim of this investigation was to optimise the room temperature internal quantum efficiency, thus the quantum well (QW) thicknesses were accordingly chosen so that the overlap of the electron/hole wave function was maximised. At low temperature, we observed a reduction of the photo luminescence decay time with decreasing well width in line with the theoretical predictions. For a structure with well thicknesses of 1.5 nm, we measured a photoluminescence internal quantum efficiency of 67% at room temperature with a peak emission wavelength of 382 nm. (c) 2006 Elsevier B.V. All rights reserved.

Efecto de tres periodos de suministro de alimento de retiro en broilers en la Empresa Tip-Top industrial, S.A.

En el presente estudio se evaluaron tres periodos de alimento de retiro o acabado en broilers (o, 3, 6 y 9 días antes de la matanza) el cual contiene 3,225 kcal EM/kg de alimento y 19% de proteína, ajustándose a los requerimientos nutricionales recomendados por Arbor Acres Farm Inc., (1992), en especial a la proporción energia-proteina. La evaluación tuvo lugar en la Granja Buenos Aires propiedad de la Empresa Tip-Top Industrial, S.A., con una duración de 42 días, en donde se utilizaron 800 pollos de engorde sin sexar (mixtos) de la línea Peterson-Arbor Acres de un día de edad, dichos pollos fueron distribuidos aleatoriamente en cuatro tratamientos: T1 suministro de alimento de retiro por nueve días), T2 suministro de alimento de retiro por seis días), T3, (Suministro de alimento de retiro por tres días) y T4 (testigo, con cero días de alimento de retiro), con cuatro repeticiones cada uno, distribuidos en un Diseño completamente al Azar sometidos a la prueba de rangos múltiples de Duncan. Las variables estudiadas fueron: consumo de alimento, peso vivo, ganancia de peso, conversión alimenticia, mortalidad vs viabilidad, rendimiento en la canal, análisis económico. No se encontraron diferencias significativas (P<0.05) entre los tratamientos al final del ensayo para el consumo de alimento, conversión alimenticia y costo de alimento, pero no así ara peso vivo y ganancia de peso. El porcentaje de mortalidad acumulada total fue de 2.5% y los rendimientos de la canal fueron: (90.74)T1 (88.98)T2, (85.86)T3,y (90.31)T4, Se corolo que el periodo de suministro de alimento de retiro que permitió los mejores pesos vivos, ganancias de pesos y conversiones alimenticias fue el periodo de tres días (T3), sin embargo, obtuvo el mayor consumo total para generar un peso promedio en la canal de 3.34 lbs, además, presentó el mayor costo alimenticio entre los tratamientos experimentales (T1, T2, T3) y bajo rendimiento en la canal, contrario al T1 que aunque los parámetros productivos fueron menores que el T3 obtuvo el mayor rendimiento en la canal con un menor costo alimenticio. El alimento de retiro no ejerció efecto sobre las variables estudiadas lo que demuestra que dicho alimento pueda ser una alternativa viable para disminuir costo alimenticio.

Carbon transition efficiency and process cost in high-rate, large-area deposition of diamond films by DC arc plasma jet

A new DC plasma torch in which are jet states and deposition parameters can be regulated over a wide range has been built. It showed advantages in producing stable plasma conditions at a small gas flow rate. Plasma jets with and without magnetically rotated arcs could be generated. With straight are jet deposition, diamond films could be formed at a rate of 39 mu m/h on Mo substrates of Phi 25 mm, and the conversion rate of carbon in CH4 to diamond was less than 3%. Under magnetically rotated conditions, diamond films could be deposited uniformly in a range of Phi 40 mm at 30 mu m/h, with a quite low total gas flow rate and high carbon conversion rate of over 11%. Mechanisms of rapid and uniform deposition of diamond films with low gas consumption and high carbon transition efficiency are discussed.