Educação continuada e gerência participativa: indicadores de qualidade da gestão de recursos humanos em enfermagem

With the purpose to contribute to the construction of quality indicators in human resources management, this study aimed at identifying, from the perspective of nurse managers, essential elements in the composition of indicators for evaluating human resources management in nursing. To that end, phenomenology was adopted as the theoretical methodological framework for this qualitative investigation, in which ten nurses performing in teaching or care provision at a university hospital participated. Following approval by the Committee of Ethics in Research and the subjects’ consent, interviews were performed from September 2005 to July 2006. The analysis enabled the recovery of the following topics “Professional education”, “Training multiprofessional nursing teams” and “Institutional training conditions” in the Permanent Education category and topics “Actions that favor participant management” and “Team work” in the Participant Management category. In its conclusion, the study considers the findings to allow identify elements constituting quality indicators in human resources management.

Caracterização da produção e qualidade físico-química de méis produzidos no Estado de Pernambuco

The present study had as objective contribute to the characterization of beekeeping in the Pernambuco State and evaluate the physical-chemical quality of the honeys produced in the region. For this, was applied a directed formulary to the representative organ of beekeeping class aboutthe productives and technicals aspects of beekeepers. Was obtained 14 samples of honey by Apis mellifera africanized, stored in sterile plastic vessels was sent to the Beekeeping Products Quality Control Laboratory (CEA-UNITAU). Was observed that the most of beekeepers have of 50 to 100 hives (57,14%), 28,57% of 100 to 200 hives and 14,28% more than 500 hives, being that 85,71% produce 30 to 50 kg honey/hives/flowering. All use the standard hive Langstroth and 85,71% obtain their swarm by capture. About the physical-chemical quality of the honey, was observed that moisture content varied from 18,2% to 22,0%, with mean value of 19,80±1,11; the water activity varied from 0,70 to 0,84 aw, with mean value of 0,79±0,05 aw; the total acidity was 24,91±8,99 meq/kg and the average index of hydroxymethylfurfural was 16,32±17,88 meq/kg. The results obtained are according to the quality limits established by the brazilian legislation, excepted the water activity that exceeded the maximum limit of 0,65 aw. The datasobtained in this paper shows the development of beekeeping in Pernambuco State and the honey presents nice quality.

Cartas de controle para gerenciamento de operações agrícolas mecanizadas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Programa Minha Casa Minha Vida: a construção social de um mercado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação do software Autodesk Revit 2016 para quantificação por meio da modelagem da informação da construção

The building budgeting quickly and accurately is a challenge faced by the companies in the sector. The cost estimation process is performed from the quantity takeoff and this process of quantification, historically, through the analysis of the project, scope of work and project information contained in 2D design, text files and spreadsheets. This method, in many cases, present itself flawed, influencing the making management decisions, once it is closely coupled to time and cost management. In this scenario, this work intends to make a critical analysis of conventional process of quantity takeoff, from the quantification through 2D designs, and with the use of the software Autodesk Revit 2016, which uses the concepts of building information modeling for automated quantity takeoff of 3D model construction. It is noted that the 3D modeling process should be aligned with the goals of budgeting. The use of BIM technology programs provides several benefits compared to traditional quantity takeoff process, representing gains in productivity, transparency and assertiveness

Estudo da qualidade da gasolina tipo A e sua composição química empregando análise de componentes principais

The type A gasoline samples were analyzed by gas chromatography with flame ionization detector (GC-FID) which allowed quantifying and classifying of the various compounds into different classes of hydrocarbons. Several physicochemical parameters were evaluated according to the official methods in order to compare the results obtained against the limits established by the Agência Nacional de Petróleo, Gás Natural e Biocombustíveis (ANP, 2011). Additionally, principal component analysis (PCA) was applied to discriminate the samples studied, which revealed the separation of four groups according to their chemical composition determined in samples collected from the eight fuel distributors in the State of Pará.

Avaliação do software Autodesk Revit 2016 para quantificação por meio da modelagem da informação da construção

The building budgeting quickly and accurately is a challenge faced by the companies in the sector. The cost estimation process is performed from the quantity takeoff and this process of quantification, historically, through the analysis of the project, scope of work and project information contained in 2D design, text files and spreadsheets. This method, in many cases, present itself flawed, influencing the making management decisions, once it is closely coupled to time and cost management. In this scenario, this work intends to make a critical analysis of conventional process of quantity takeoff, from the quantification through 2D designs, and with the use of the software Autodesk Revit 2016, which uses the concepts of building information modeling for automated quantity takeoff of 3D model construction. It is noted that the 3D modeling process should be aligned with the goals of budgeting. The use of BIM technology programs provides several benefits compared to traditional quantity takeoff process, representing gains in productivity, transparency and assertiveness

Aspetos do dimensionamento de painéis prefabricados de fachada em GRC do tipo nervurado

O recurso a sistemas de fachadas prefabricadas no ramo da Construção Civil tem-se revelado uma opção eficaz, apresentando-se como uma solução de vanguarda no sentido de garantir vantagens ao nível da qualidade e da produtividade. A introdução de painéis de GRC (Glassfibre Reinforced Concrete) no mercado da construção trouxe vantagens ao sector uma vez que compatibiliza as vantagens da prefabricação leve, elevados níveis de desempenho e uma grande latitude em termos de formas e acabamentos. Este compósito é formado por uma matriz de argamassa reforçada com fibra de vidro. A incorporação das fibras permite melhorar as propriedades mecânicas da argamassa, principalmente ao nível da resistência de tração e flexão, fazendo com que os elementos possam ter menores espessuras e consequentemente menor peso, comparativamente com peças de betão armado. No mercado são comercializados três tipos de painéis de GRC, os do tipo nervurado, os do tipo stud frame e os do tipo sanduiche. Estes vários tipos de painéis tem as suas particularidades e a seleção depende das exigências e das características da obra. O estudo teve como alvo diferentes formas e dimensões de painéis de fachada em GRC do tipo nervurado. No presente trabalho faz-se um estudo comparativo da aplicação de dois métodos de dimensionamento. Comparam-se os resultados obtidos pela teoria clássica da flexão (TCF) e pelo método dos elementos finitos (MEF) e confrontam-se estes valores com os resultados obtidos em ensaios. Com o estudo efetuado conclui-se pela validade e utilidade da análise através da TCF, cujos resultados se aproximam bastante da análise pelo MEF. Sugerem-se coeficientes de ajustamento no sentido de adaptar a pratica de projeto em conformidade com os resultados verificados.

A COMUNICAÇÃO DE MERCADO E OS BENS DE CAPITAL: estratégias e desafios do setor de equipamentos para construção

O setor de máquinas e equipamentos para construção civil utilizados em obras de grande porte tem uma participação expressiva tanto na economia brasileira como na cadeia produtiva da construção civil. Trata-se de um setor hipercompetitivo, composto por indústrias transnacionais que têm no marketing de relacionamento e nas estratégias B2B os principais pilares de sustentação de estratégia de comunicação com o mercado. Utilizando como técnica o estudo de caso múltiplo do qual fizeram parte três dos maiores fabricantes de equipamentos para construção instalados no Brasil Caterpillar, Case e Volvo o estudo mostra como e porque essas empresas optaram por privilegiar o marketing de relacionamento e a imagem da marca, em detrimento de outras competências de comunicação, como forma de construir relacionamentos estáveis, fiéis e de longo prazo com seus clientes.

Contribuição ao estudo avançado das argamassas de alto desempenho para reparos estruturais

Inúmeras estruturas de concreto no Brasil e no mundo estão atingindo o limite de sua vida útil projetada, completando um ciclo de cinco ou mais décadas de uso e operação. Além das estruturas mais antigas, existem ainda estruturas com reduzido tempo de serviço, e qualidade discutível, que já apresentam patologias em estado tão avançado que chegam a comprometer o seu desempenho. Vindo ao encontro dessas necessidades e no sentido de contribuir para o avanço científico e tecnológico do setor, este trabalho apresenta um método para dosagem, preparo e aplicação de argamassas de alto desempenho para recuperação de estruturas deterioradas, além de sugerir procedimentos para a realização desses reparos, fomentando a cultura das manutenções preventivas e desmistificando a complexidade atribuída a tais operações. Para tanto, foram realizados ensaios mecânicos, microestruturais e relacionados à durabilidade em corpos-de-prova moldados com sílica ativa e látex de estireno-butadieno. Os resultados indicaram que a adoção desses ingredientes, na composição da argamassa de reparo, provocou uma redução significativa da permeabilidade total e descontinuidade de poros, assim como promoveu uma melhor integridade dos constituintes da argamassa, traduzindo-se em uma ampliação, expressiva, das suas capacidades mecânicas. Quando comparada aos produtos industrializados da construção civil, com padrões similares, proporcionou uma economia da ordem de 85%, que permitiria recuperar, com os mesmos custos, quase cinco vezes mais estruturas comprometidas. Este estudo, de viés altamente tecnológico, vem oferecer à construção civil uma argamassa polimérica de alto desempenho, com função reparadora e custo mais acessível, que pode ser adotada em canteiros de obras, implementando ações de natureza sustentável e ainda atendendo às atuais exigências elencadas pela literatura, relacionadas à desempenho, vida útil e durabilidade das estruturas reparadas.

Princípios da construção enxuta no processo de planejamento de uma construtora de grande porte de Natal (RN)

Considered as one of the oldest activities done by men, the civil construction represents one of the most important sectors for the economic growth of a country, in spite of the low results of growth in the past few years and also in the current year. To make this industry grow, even with an unfavourable economic scenario, it is necessary to implement an effective planning in its activities. This is one of the most important concepts brought by the Lean Construction philosophy, which had its origin through the adaptation of the concepts established by the Toyota Production System (TPS) or Lean Production. By having as a scenario the city of Natal\RN, the main goal of this dissertation consists in investigating how the 11 principles of the lean construction influenced the schedule of a construction field that started to implement its lean concepts. As a methodology, it was used the case study of a big enterprise located in Natal (RN). During the execution of the method, documents related to the short-term, midterm and long-term planning were analysed , aiming to describe its planning process; it was also described the factors that caused the delays at the enterprises’ field ;in addition, a comparison was made between the results obtained at the case study and the ones presented at the literature; in the end, the actions were listed by the company, which had the purpose to solve the main causes of delays, verifying if they were linked to the lean construction principles. This research finds its reason of existence in the relevance of its theme at the nowadays reality of the construction industry, since the principles of the lean construction uphold the reduction of processes that are useless, diminishing wastes as well as costs in construction. The relevance is perceived for the academy, in terms of the possibility to discuss if the concepts established by the lean production are being adapted to the civil construction sector and how this adaptation is influencing at the buildings planning project. Economic importance, because with the reduction of the wastes and costs, the companies may reduce the building´s value into a more accessible value, even with the sector´s lower growth. And social significance, because lean construction gives a better participation of the labour at the planning activity. Among the main results, the high frequency of planning errors stands out, mainly the programming deviations and not the task programming, as well as the execution errors, low productivity and activities executed by the workers. Amongst the 11 principles of lean construction, only five were related with the 12 actions analysed by the author. From the 12 actions, four were completely cohesive to one or more from these five principles. Some improvement proposals were also highlighted and established by the research.

Avaliação da conformidade dos blocos cerâmicos produzidos em algumas cerâmicas no Rio Grande do Norte

The final quality of the works accomplished by the building construction industry depends directly on the quality of the materials supplied and used during all their phases of execution. The federal government participation and several state programs have established conditions to stimulate and require the increment of the quality level in the building construction industry´s product chain. These programs aim at the product conformity to the technical standards. Within this context, the evaluation program of the ceramic product conformity in Rio Grande do Norte state is assessing the conformity degree to Brazilian Technical Standards of ceramic bricks and tiles made in the ceramic production area in the state. In this work, is determine the degree of conformity of the sealing ceramic bricks made by some companies in different areas of the state, such as Assú, São Gonçalo do Amarante, Apodi, Parelhas, São José do Mipibu e Macaíba. Using the technical standards as a point of reference, we attempted to reproduce in the laboratory the experimental procedures to the analysis execution, according to the specifications. It was possible to determine that none of the evaluated samples are in strict conformity with the current technical standards, what reflects the real situation of the products available on the market.

Testes para a avaliação da qualidade fisiológica de sementes de Moringa oleifera Lam

The evaluation of seed vigor is an important factor for detection of lots of high quality seeds, so that development of procedures to evaluate the physiological potential has been an important tool in quality control programs seeds. In this sense the study aimed to adapt the methodologies of accelerated aging, electrical conductivity and potassium leaching to evaluate Moringa oleifera seed vigor LAM.. Therefore, four lots of moringa seeds were subjected to the germination tests, seedling emergence, speed of emergence index, emergence first count, length and dry mass of seedlings and cold test for their physiological characterization, in addition to accelerated aging, electrical conductivity and potassium leaching. The experimental design was completely randomized with four replications of 50 seeds and the means compared by Tukey test at 5% probability. For accelerated aging the periods were studied aging 12, 24 and 72 hours at 40, 42 and 45°C. For the electrical conductivity test was used to a temperature of 25°C for periods of 4, 8, 12, 16 and 24 hours of immersion in 75 to 125 mL of distilled water, using 25 to 50 seeds, and for potassium leaching test samples were used 25 to 50 seeds, placed in plastic cups containing 70 and 100 mL of distilled water at 25°C for periods of 1, 2, 3, 4, 5 and 6 hours. From the results obtained, it can be inferred that the methods best fit for the accelerated aging test Moringa seeds were a temperature of 40°C for 12 to 72 hours, 42°C 72 hours 45°C 24 hours . In the electrical conductivity test Moringa seeds, the combination of 50 seeds in 75 mL distilled water for a period of immersion of 4 hours and 50 seeds in 125 mL of 4 hours were efficient for the differentiation of lots of Moringa seeds as to vigor and for potassium leaching test moringa seeds, the combination of 50 seeds in 100mL of distilled water allowed the separation of lots of four levels of vigor, at 2 hours of immersion, showing promise in evaluate the quality of moringa seeds.

Testes para a avaliação da qualidade fisiológica de sementes de Moringa oleifera Lam

The evaluation of seed vigor is an important factor for detection of lots of high quality seeds, so that development of procedures to evaluate the physiological potential has been an important tool in quality control programs seeds. In this sense the study aimed to adapt the methodologies of accelerated aging, electrical conductivity and potassium leaching to evaluate Moringa oleifera seed vigor LAM.. Therefore, four lots of moringa seeds were subjected to the germination tests, seedling emergence, speed of emergence index, emergence first count, length and dry mass of seedlings and cold test for their physiological characterization, in addition to accelerated aging, electrical conductivity and potassium leaching. The experimental design was completely randomized with four replications of 50 seeds and the means compared by Tukey test at 5% probability. For accelerated aging the periods were studied aging 12, 24 and 72 hours at 40, 42 and 45°C. For the electrical conductivity test was used to a temperature of 25°C for periods of 4, 8, 12, 16 and 24 hours of immersion in 75 to 125 mL of distilled water, using 25 to 50 seeds, and for potassium leaching test samples were used 25 to 50 seeds, placed in plastic cups containing 70 and 100 mL of distilled water at 25°C for periods of 1, 2, 3, 4, 5 and 6 hours. From the results obtained, it can be inferred that the methods best fit for the accelerated aging test Moringa seeds were a temperature of 40°C for 12 to 72 hours, 42°C 72 hours 45°C 24 hours . In the electrical conductivity test Moringa seeds, the combination of 50 seeds in 75 mL distilled water for a period of immersion of 4 hours and 50 seeds in 125 mL of 4 hours were efficient for the differentiation of lots of Moringa seeds as to vigor and for potassium leaching test moringa seeds, the combination of 50 seeds in 100mL of distilled water allowed the separation of lots of four levels of vigor, at 2 hours of immersion, showing promise in evaluate the quality of moringa seeds.