Observation on the urinogenital papilla and sexual dimorphism in some Indian gobiids (Gobiidae: Teleostei)

A thorough comparative study on the urinogenital papilla and sexual dimorphism has been made for the first time in both the sexes of twelve Indian gobiids: Glassogobius giuris (Hamilton); Acentrogobius cyanomos (Bleeker); Eleotriodes muralis (Valenciennes); Parapocryptes serperaster (Richardson); Apocryptes bato (Hamilton); Scartclaos viridis (Hamilton); Boleophthalmus boddarti (Pallas), Periophthalmus schlosseri (Pallas); P. koelreuteri (Pallas); Taenioides anguillaris (Linnaeus); T. buchanani (Day); Odontamblyopus rubicundus (Hamilton). The urinogenital papilla, originating as a free muscular organ from the ventral surface of the body-wall and shortly behind anus, is present in both the sexes. It is an important organ of primary sex recognition in all species. In case of male the papilla is conical, broad at the base and in female it is either flattened, distally truncated or bluntly rounded. The presence of permanent colour mark over the specific region of the body surface is another secondary sexual character in a few species. Besides, colouration may also be a nuptial secondary sex character developed in some during peak breeding season. The enlargement and colouration of the organ is subject to seasonal variations parallel to the seasonal gonadal cycle. The histological architecture of the papilla shows a high degree of cellular specialization and an interrelationship to the urinary and genital ducts. The functional efficacy and significance of the papilla in the breeding biology of these fishes has been discussed.

Studies on the performance of Ovatide on breeding of Indian major carps

The paper deals with the experimental studies on breeding of Indian Major Carps - Catla catla (Valenciennes), Labeo rohita (Hamilton), Cirrhinus mrigala (Hamilton), & Labeo calbasu (Hamilton) with the help of 'Ovatide' which is being used as an alternative inducing agent for commercial seed production. This study has been conducted for six consecutive months (April - September, 2000) in a stone-pitched breeding channels of a farm located at Midnapore District, West Bengal. The doses of 'Ovatide' (0.5 ml/kg of fish weight) remained same for each female species during the entire study period and males were released without any dose. The physicochemical parameters of water during different months were estimated. The latency period and fertilization percentage varied in different months and species. The results confirmed that 'Ovatide' can be used successfully in a much more cost-effective way for induced breeding of carps, even in rural fish farms with morrum-pitched breeding channels.

Three band-gap QW intermixing in InP/InGaAs/InGaAsP system for monolithically integrated optical switch

Quantum well intermixing is a key technique for photonic integration. The intermixing of InP/InGaAs/InGaAsP material involving the deposition of a layer of sputtered SiO2 on the semiconductor surface, followed by thermal annealing has allowed good control of the intermixing process and has been used to fabricate extended cavity lasers. This will be used for optimization of the performance of optical switches consisting of passive components, modulators and amplifiers.

Scale structure, age and growth in the freshwater carp, Labeo calbasu (Pisces/Cyprinidae) from Harike wetland, India

Age structure and growth profile based on the scale studies of 468 specimens ranging from 17-62 cm total length of Labeo calbasu (Hamilton) from Harike wetland (30°13'N, 75°12'E), Punjab, India have been described, the present study showed better growth in terms of two important growth parameters namely index of species average size and population weight-growth intensity. Two distinct phases in its life history have been described that indicates the optimum exploitation of this species from this water body. Harvestable size is found to be fish of 34 cm total length. The detailed structural elaboration of scale (normal, regenerated, lateral line) has also been done using scanning electron microscopy (SEM).

Early developmental stages of two Secutor species (Family: Leiognathidae) collected from the Bak-khali river estuary of the Bay of Bengal, Bangladesh

Early developmental stages of two Secutor species, Secutor insidiator (Bloch) (11.9-36.0 mm standard length, SL) and Secutor ruconius (Hamilton-Buchanan) (14.0-33.0 mm SL) collected by ichthyoplankton net from the Bak-khali river estuary of the Bay of Bengal, Cox's Bazar, Bangladesh are described and illustrated. All of the fins with supporting spines and rays were present in the smallest collected sizes of both species. With growth of the specimens, significant changes in melanophore patterns were found. S. insidiator is similar to S. ruconius in having upward protracting mouth parts and body colouration, but can be distinguished easily by its more elongate body shape (body depth 38-47% of SL compared with 46-52% of SL in Secutor ruconius). Both the species occurred round the year from August 1998 to July 1999. The surface water temperature and salinity during the study period varied from 22.0-32) C and 10-37 ppt respectively.

Biology of Bombay duck, Harpodon nehereus (Ham., 1822), from Mumbai waters, India

Morphometric and meristic study of Harpodon nehereus (Hamilton, 1822) from Mumbai waters indicated that the specimens belonged to a homogenous population. Based on the meristic study, the fin formula can be written as B sub(23-269), D sub(12-139), P sub(11-139), V sub(9), A sub(13-15), C sub(19), L sub(40). Length-weight study revealed an allometric relationship, presented as Log W= -3.1362 + 3.6059 Log L. The analysis of food and feeding habits revealed the species to be voracious, carnivorous and cannibalistic, feeding mainly on Acetes spp., juveniles of H. nehereus itself, prawns and Coilia dussumieri. The feeding intensity was found to be the maximum during September and November, and also in mature specimens which may be the preparation for the ensuing spawning activity. Reproductive biology indicated two peak spawning seasons in November and March. However, the species as a whole has prolonged breeding season and spawning occurs throughout the year. Average fecundity was estimated as 314 ova/g body weight of fish and the length at which 50% of female specimens mature (Lc sub (50)) was calculated as 255 mm.

Reproductive biology of Catla catla in the Udawalawe reservoir, Sri Lanka

The reproductive biology of Catla catla (Hamilton-Buchanan) in the Udawalawe reservoir was studied from June 2007 to December 2008. Samples of eggs from Indian major carp C. catla were collected from fish landed in the reservoir and analysed in the laboratory to assess the reproductive characteristics. C. catla. Cirrhinus mrigala, exotic Cichlids and Labeo rohita accounted for 62.2%, 21.0%, 12% and 1.0% respectively of the total landings in the Udawalawe reservoir during the study period. Gonads of C. catla were collected in the field and examined in the laboratory to determine the stage of maturity and fecundity. Data on fish length and gonad weight were collected to estimate the gonado-somatic indices (OSI). Landed catches were also examined in the field to determine the sex ratio of C. catla in the catch and was found to be 1:5.6 male to female. Results of fecundity estimates revealed that C. catla females in the Udawalwe reservoir were fully mature in June and October of the year. From the monthly variation of OSI, two recruitment pulses per year were evident. The length of the body at first maturity in female C. catla in the Udawalwe reservoir was estimated to be 74.2 cm.

A new species of the genus Tor from Yunnan, China (Teleostei : Cyprinidae)

A new species of the subfamily Barbinae, Tor yingjiangensis, is recognized from Yunnan province, China. It can be distinguished from other Tor species by the following combination of characters: last simple dorsal-fin ray osseous and non-serrated; no forward directed predorsal procumbent spine; head length considerably longer than body depth; no tubercles on the snout or sides of the face; 18-20 gill rakers on the outside of first gill arch; 24-26 lateral line scales; median lobe of lower lip short, its posterior margin truncate, not extending to the vertical across the inner corners of the mouth; and the condition of the lower lip consistent in individuals of different sizes. The new species has been misidentified previously as Tor putitora (Hamilton, F. 1822. An account of the fishes found in the River Ganges and its Branches. Edinburgh & London. 405 pp), which occurs in the Ganges and Indus River basins. The new species can easily be distinguished from T. putitora by having 3-3.5 (vs. 2.5) scales from lateral line to pelvic-fin origin, shorter caudal peduncle length (13.0% vs. 17.2% of standard length), lesser body depth (26.4% vs. 24.0% of standard length) and longer caudal peduncle depth (12.0% vs. 10.9% of standard length), no longitudinal stripe present along side of body, and eyes visible in ventral view of head.

CHANGES IN PREDICTED MOS DEVICE CHARACTERISTICS DUE TO THE USE OF TWO DIMENSIONAL SOURCE/DRAIN PROFILES.

Two-dimensional MOS device simulation programs such as MINIMOS left bracket 1 right bracket are limited in their validity due to assumptions made in defining the initial two-dimensional source/drain profiles. The two options available to define source/drain regions both construct a two-dimensional profile from one-dimensional profiles normal to the surface. Inaccuracies in forming these source/drain profiles can be expected to effect predicted device characteristics as channel dimensions of the device are reduced. This paper examines these changes by interfacing numerically similated two dimensional source/drain profiles to MINIMOS and comparing predicted I//D-V//D characteristics with 2-D interfacing, 2-D profiles constructed from interfaced 1-D profiles and MINIMOS self generated profiles. Data obtained for simulations of 3 mu m N and P channel devices are presented.

Large-eddy simulation of complex geometry jets

Computations are made for chevron and coflowing jet nozzles. The latter has a bypass ratio of 6:1. Also, unlike the chevron nozzle, the core flow is heated, making the inlet conditions reminiscent of those for a real engine. A large-eddy resolving approach is used with circa 12 × 10 6 cell meshes. Because the codes being used tend toward being dissipative the subgrid scale model is abandoned, giving what can be termed numerical large-eddy simulation. To overcome near-wall modeling problems a hybrid numerical large-eddy simulation-Reynolds-averaged Navier-Stokes related method is used. For y + ≤ 60 a Reynolds-averaged Navier-Stokes model is used. Blending between the two regions makes use of the differential Hamilton-Jabobi equation, an extension of the eikonal equation. For both nozzles, results show encouraging agreement with measurements of other workers. The eikonal equation is also used for ray tracing to explore the effect of the mean flow on acoustic ray trajectories, thus yielding a coherent solution strategy. © 2011 by Cambridge University.

Large eddy simulation of a hot, high speed coflowing jet

Computations are made of a short cowl coflowing jet nozzle with a bypass ratio 8 : 1. The core flow is heated, making the inlet conditions reminiscent of those for a real engine. A large eddy resolving approach is used with a 12 × 106 cell mesh. Since the code being used tends towards being dissipative the sub-grid scale (SGS) model is abandoned giving what can be termed Numerical Large Eddy Simulation (NLES). To overcome near wall modelling problems a hybrid NLES-RANS (Reynolds Averaged Navier-Stokes) related method is used. For y+ ≤ 60 a κ-l model is used. Blending between the two regions makes use of the differential Hamilton-Jabobi (HJ) equation, an extension of the eikonal equation. Results show encouraging agreement with existing measurements of other workers. The eikonal equation is also used for acoustic ray tracing to explore the effect of the mean flow on acoustic ray trajectories, thus yielding a coherent solution strategy. Copyright © 2011 by ASME.

High-order DES and zonal LES of a labyrinth seal

Hybrid numerical large eddy simulation (NLES) and detached eddy simulation (DES) methods are assessed on a labyrinth seal geometry. A high sixth order discretization scheme is used and is validated using a test case of a two dimensional vortex. The hybrid approach adopts a new blending function and along with DES is initially validated using a simple cavity flow. The NLES method is also validated outside of RANS zones. It is found that there is very little resolved turbulence in the cavity for the DES simulation. For the labyrinth seal calculations the DES approach is problematic giving virtually no resolved turbulence content. It is seen that over the tooth tips the extent of the LES region is small and is likely to be a strong contributor to excessive flow damping in these regions. On the other hand the zonal Hamilton-Jacobi approach did not suffer from this trait. In both cases the meshes used are considered to be hybrid RANS-LES adequate. Fortunately (or perhaps unfortunately) the DES profiles are in agreement with the time mean experimental measurements. It is concluded that for an inexperienced CFD practitioner this could have wider implications particularly if transient results such as unsteady loading are desired. Copyright © 2012 by the American Institute of Aeronautics and Astronautics, Inc.