Growth process in business and social entrepreneurship: the case of Brazil

The purpose of the dissertation is to investigate in depth the difference between the challenges social and business entrepreneurs face in the growth phase of their business in the particular environment of Brazil. This objective has been achieved through a two-steps methodology. The first step is a set of in-depth interviews carried out with industry experts such as professors, venture capitalists, consultants, fund managers or people involved in the support of growing startups (i.e. accelerators). These interviews allowed, first, to build a general perspective on the environment entrepreneurs operate into and to identify a list of challenges entrepreneurs face in the growth process of their business. This list was completed with the additional challenges identified in the previous literature. The second step of the methodology was to test the relevance of these challenges in the mind and experience of social and traditional entrepreneurs. A questionnaire was then submitted to 145 social and 286 traditional entrepreneurs. The results were statistically analyzed to test the relative relevance of these challenges for one group of entrepreneurs with respect to the other. The outcome of the analysis was significant. The most relevant challenges identified were, for both groups, taxation, bureaucracy, finding the right employees, creating effective teams, measuring firm performance and social value creation and obtaining funds. On the other side motivation, innovation, competition and lack of market space for growth represented the least relevant issues in the minds of entrepreneurs. This rank however did not differ significantly from social to traditional entrepreneurs. This testifies that in Brazil social and traditional entrepreneurs face the same set of challenges despite the widespread belief of the opposite.

Theoretical analysis of the energy levels induced by oxygen vacancies and the doping process (Co, Cu and Zn) on SnO2 (110) surface models

Density functional calculation at B3LYP level was employed to study the surface oxygen vacancies and the doping process of Co, Cu and Zn on SnO2 (110) surface models. Large clusters, based on (SnO2)(15) models, were selected to simulate the oxidized (Sn15O30), half-reduced (Sn15O29) and the reduced (Sn15O28) surfaces. The doping process was considered on the reduced surfaces: Sn13Co2O28, Sn13Cu2O28 and Sn13Zn2O28. The results are analyzed and discussed based on a calculation of the energy levels along the bulk band gap region, determined by a projection of the monoelectron level structure on to the atomic basis set and by the density of states. This procedure enables one to distinguish the states coming from the bulk, the oxygen vacancies and the doping process, on passing from an oxidized to a reduced surface, missing bridge oxygen atoms generate electronic levels along the band gap region, associated with 5s/5p of four-/five-fold Sn and 2p of in-plane O centers located on the exposed surface, which is in agreement with previous theoretical and experimental investigations. The formation energy of one and two oxygen vacancies is 3.0 and 3.9 eV, respectively. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Healing process in anastomosis of homologous venous grafts preserved in glutaraldehyde implanted aorta of rabbits

Aim. Autologous vein (AV) is sometimes not suitable or present for a vascular restoration. Homologous vein preserved in glutaraldehyde may be an alternative to AV, but little is yet known about this graft and its healing process after implantation in arteries. The purpose of this study was to compare the initial healing process of glutaraldehyde-tanned homologous venous grafts (group 1) with fresh autologous venous grafts (group 2), at 4 or 15 days.Methods. Forty Norfolk rabbits were allocated in 2 groups of 20 animals each. The grafts was interposed in the infra-renal aorta of the rabbit. Anastomotic tensile strength (TS), hydroxyproline (HP) determination, and histology (HA) were performed.Results. TS increased in both groups, from the 4th to 15th day, (p < 0.01) in both proximal (G1: from 364.5 &PLUSMN; 98.3 g to 491.8 &PLUSMN; 107.3 g; G2: from 366.26 &PLUSMN; 85.15 g to 518.46 &PLUSMN; 82.79 g) and distal anastomosis (GI: from 363.53 &PLUSMN; 96.26 g to 507.32 &PLUSMN; 91.01 g; G2: from 352.30 &PLUSMN; 102.41 g to 528.67 &PLUSMN; 48.58 g), with no difference between the groups. HP did not change (p > 0.10) in this same period and was similar in both groups, in the proximal (GI: from 677.99 +/- 153.98 mug/100 mg to 914.92 +/- 459.83 mug/100 mg; G2: from 668.65 +/- 170.28 mug/100 mg to 669.46 +/- 319.80 mug/100 mg) as well as in the distal anastomosis (G1:from 740.07 +/- 213.53 mug/100 mg to 923.52 +/- 270.57 mug/100 mg; G2: from 737.66 +/- 266.76 mug/100 mg to 707.68 +/- 171.25 mug/100 mg). Initial inflammatory and reparative features of the anastomosis were similar in both groups.Conclusion. We can conclude that the healing process of the glutaraldehyde-tanned homologous vein graft was similar to that of the fresh autologous venous graft.

Family visitors and companions of hospitalized elderly and adults: analysis of the experience from the perspective of the nursing working process

Trata-se de estudo qualitativo, utilizando-se como referencial metodológico a Grounded Theory e como referencial teórico o Processo de Trabalho em Enfermagem, para compreender o papel assumido pelo enfermeiro perante as normas e rotinas hospitalares, relativas aos familiares visitantes e acompanhantes de adultos e idosos internados em um Hospital Universitário. A análise dos dados permitiu a identificação do tema: definindo-se a modalidade de apoio familiar durante a hospitalização, que reúne duas categorias principais: tornando-se familiar visitante e tornando-se familiar acompanhante. Por meio da análise, pôde-se aprofundar a compreensão do quanto as regras estabelecidas, com o objetivo de disciplinar e tornar eficiente o trabalho desenvolvido no hospital, podem explicitar o desprovimento de autonomia no processo de trabalho, para modificar as relações nesse contexto e o quanto a apropriação do familiar como parte da equipe de saúde, está distante de ser pensada no concreto das instituições.

Comparing the Teaching-Learning Process With and Without the Use of Computerized Technological Resources

Computerized technological resources have become essential in education, particularly for teaching topics that require the performance of specific tasks. These resources can effectively help the execution of such tasks and the teaching-learning process itself. After the development of a Web site on the topic of nursing staff scheduling, this study aimed at comparing the development of students involved in the teaching-learning process of the previously mentioned topic, with and without the use of computer technology. Two random groups of undergraduate nursing students from a public university in São Paulo state, Brazil, were organized: a case group (used the Web site) and a control group (did not use the Web site). Data were collected from 2003 to 2005 after approval by the Research Ethics Committee. Results showed no significant difference in motivation or knowledge acquisition. A similar performance for the two groups was also verified. Other aspects observed were difficulty in doing the nursing staff scheduling exercise and the students' acknowledgment of the topic's importance for their training and professional lives; easy access was considered to be a positive aspect for maintaining the Web site.

Amitriptyline aggravates the fibrosis process in a rat model of infravesical obstruction

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of low-level laser therapy on the healing process after tooth replantation: a histomorphometrical and immunohistochemical analysis

Success of tooth replantation is limited because part of the replanted tooth is lost because of progressive root resorption. This study used histomorphometry and immunohistochemistry to evaluate the effect of low-level laser therapy (LLLT) on the healing process of rat teeth replanted after different extra-oral periods, simulating immediate and delayed replantation. Sixty Wistar rats (Rattus norvegicus albinus) had their maxillary right incisors extracted and randomly assigned to six groups (n = 10): C4, C30 and C45, in which the teeth were replanted 4 min (immediate), 30 min (delayed) and 45 min (delayed) after extraction, respectively, and L4, L30 and L45, in which the teeth were replanted after the same extra-alveolar times, but the root surfaces and the alveolar wounds were irradiated with a gallium-aluminum-arsenate (GaAlAs) diode laser before replantation. The animals were sacrificed after 60 days. The anatomic pieces containing the replanted teeth were obtained and processed for either histomorphometrical analysis under optical microscopy or immunohistochemical expression of receptor activator of nuclear factor Kappa-B (RANK), and its ligand (RANKL), osteoprotegerin (OPG) and tartrate-resistant acid phosphatase (TRAP) proteins. Areas of external replacement and inflammatory root resorption were observed in all groups, without statistically significant differences (P > 0.05). Ankylosis was more frequent in L30 than in C30 (P < 0.05). RANKL immunostaining predominated over RANK and OPG immunostaining in both groups with immediate tooth replantation (P < 0.05). For the 45-min extra-alveolar time, however, there was greater evidence of RANK immunostaining compared to RANKL for both control and laser-treated groups (P < 0.05). Positive TRAP immunostaining predominated in L4 and L30 (P < 0.05). In conclusion, under the tested conditions, the treatment of the root surface and the alveolar wound with LLLT did not improve the healing process after immediate and delayed tooth replantation in rats.

Fat body cells of Amblyomma cajennense partially engorged females (Acari: Ixodidae) and their role on vitellogenesis process

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tendency towards homogenization in fish assemblages in the cascade reservoir system of the Tiete river basin, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal decomposition of crystalline Ni-II-Cr-III layered double hydroxide: A structural study of the segregation process

A structural study of the thermal evolution of Ni0.69Cr0.31(OH)(2)(CO3)(0.155)(.)nH(2)O into NiO and tetragonal NiCr2O4 is reported. The characteristic structural parameters of the two coexisting crystalline phases, as well as their relative abundance, were determined by Rietveld refinement of powder x-ray diffraction (PXRD) patterns. The results of the simulations allowed us to elucidate the mechanism of the demixing process of the oxides. It is demonstrated that nucleation of a metastable nickel chromite within the common oxygen framework of the parent Cr-III-doped bunsenite is the initial step of the cationic redistribution. The role that trivalent cations play in the segregation of crystalline spinels is also discussed.

MNDO theoretical study of ethanol decomposition process on SnO2 surfaces

An MNDO study has been carried out to analyze the decomposition process of the ethanol molecule on a SnO2 surface. A (SnO2)(7) (110) model has been selected to represent the surface. The decomposition process has been monitored by selection of a hydrogen-alpha-carbon distance of the ethanol molecule as reaction coordinate, This minimum energy pro file shows a maximum of 186 kJ mol(-1), and in the transition state there is a transfer of hydrogen-alpha-carbon to the SnO2 surface. There is also the interaction between the alcohol hydroxyls and the two oxygens of the oxide.

Optimization of Radial Basis Function neural network employed for prediction of surface roughness in hard turning process using Taguchi's orthogonal arrays

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Properties advanced of the silicon nitride based ceramics and recent performance on automotive parts manufacture by machining process: Advanced Ceramics, demand Forecast

Automotive parts manufacture by machining process using silicon nitride-based ceramic tool development in Brazil already is a reality. Si 3N4-based ceramic cutting tools offer a high productivity due to their excellent hot hardness, which allows high cutting speeds. Under such conditions the cutting tool must be resistant to a combination of mechanical, thermal and chemical attacks. Silicon nitride based ceramic materials constitute a mature technology with a very broad base of current and potential applications. The best opportunities for Si3N 4-based ceramics include ballistic armor, composite automotive brakes, diesel particulate filters, joint replacement products and others. The goal of this work was to show latter advance in silicon nitride manufacture and its recent evolution on machining process of gray cast iron, compacted graphite iron and Ti-6Al-4V. Materials characterization and machining tests were analyzed by X-Ray Diffraction, Scanning Electron Microscopy, Vickers hardness and toughness fracture and technical norm. In recent works the authors has been proved to advance in microstructural, mechanical and physic properties control. These facts prove that silicon nitride-based ceramic has enough resistance to withstand the impacts inherent to the machining of gray cast iron (CI), compacted graphite iron (CGI) and Ti-6Al-4V (6-4). Copyright © 2008 SAE International.

The institutionality of gender in the State: new analytical perspectives

Includes bibliography

Some lessons of the Argentine privatization process

Includes bibliography