Ventricular Remodeling Induced by Tissue Vitamin A Deficiency in Rats

Background/Aims: Experimental studies suggest that vitamin A plays a role in regulating cardiac structure and function. We tested the hypothesis that cardiac vitamin A deficiency is associated with adverse myocardial remodeling in young adult rats. Methods: Two groups of young female rats, control (C - n = 29) and tissue vitamin A deficient (RVA - n = 31), were subjected to transthoracic echocardiography exam, isolated rat heart study and biochemical study. Results: The RVA rats showed a reduced total vitamin A concentration in both the liver and heart [vitamin A in heart, mu mol/kg (C = 0.95 +/- 0.44 and RVA = 0.24 +/- 0.16, p = 0.01)] with the same serum retinol levels (C = 0.73 +/- 0.29 mu mol/L e RVA = 0.62 +/- 0.17 mu mol/L, p = 0.34). The RVA rats showed higher left ventricular diameters and reduced systolic function. The RVA rats also demonstrated increased lipid hydroperoxide/total antioxidant capacity ratio and cardiac levels of IFN-gamma and TNF-alpha but not of metalloproteinase (MMP)-2 and -9 activity. on the other hand, the RVA rats had decreased levels of beta-hydroxyacylcoenzyme A dehydrogenase and lactate dehydrogenase. Conclusions: Tissue vitamin A deficiency stimulated cardiac remodeling and ventricular dysfunction. Additionally, the data support the involvement of oxidative stress, energy metabolism, and cytokine production in this remodeling process. Copyright (C) 2010 S. Karger AG, Basel

Ultra-structure and histochemistry of digestive cells of Podisus nigrispinus (Hemiptera: Pentatomidae) fed with prey reared on bt-cotton

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Plasmodium vivax circumsporozoite genotypes: a limited variation or new subspecies with major biological consequences?

Background: Plasmodium vivax circumsporozoite variants have been identified in several geographical areas. The real implication of the genetic variation in this region of the P. vivax genome has been questioned for a long time. Although previous studies have observed significant association between VK210 and the Duffy blood group, we present here that evidences of this variation are limited to the CSP central portion.Methods: The phylogenetic analyses were accomplished starting from the amplification of conserved domains of 18 SSU RNAr and Cyt B. The antibodies responses against the CSP peptides, MSP-1, AMA-1 and DBP were detected by ELISA, in plasma samples of individuals infected with two P. vivax CS genotypes: VK210 and P. vivax-like.Results: These analyses of the two markers demonstrate high similarity among the P. vivax CS genotypes and surprisingly showed diversity equal to zero between VK210 and P. vivax-like, positioning these CS genotypes in the same clade. A high frequency IgG antibody against the N- and C-terminal regions of the P. vivax CSP was found as compared to the immune response to the R- and V-repetitive regions (p = 0.0005, Fisher's Exact test). This difference was more pronounced when the P. vivax-like variant was present in the infection (p = 0.003, Fisher's Exact test). A high frequency of antibody response against MSP-1 and AMA-1 peptides was observed for all P. vivax CS genotypes in comparison to the same frequency for DBP.Conclusions: This results target that the differences among the P. vivax CS variants are restrict to the central repeated region of the protein, mostly nucleotide variation with important serological consequences.

Evaluation of thermal compatibility between core and veneer dental ceramics using shear bond strength test and contact angle measurement

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

Objectives. This study characterized the feldspathic ceramic surfaces after various silanization protocols.Methods. Ceramic bars (2 mm x 4 mm x 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were ultrasonically cleaned in distilled water for 10 min. The ceramic specimens were randomly divided into nine groups (N = 2 per group) and were treated with different silane protocols. MPS silane (ESPE-Sil, 3M ESPE) was applied to all specimens and left to react at 20 degrees C for 2 min (G20). After drying, the specimens were subjected to heat treatment in an oven at 38 degrees C (G38), 79 degrees C (G79) or 100 degrees C (G100) for 1 min. Half of the specimens of each group were rinsed with water at 80 degrees C for 15 s (G20B, G38B, G79B, G100B). The control group (GC) received no silane. Attenuated total reflection infrared Fourier transform analysis (ATR FT-IR) was performed using a spectrometer. Thickness of silane layer was measured using a spectroscopic ellip-someter working in the lambda = 632.8 nm (He-Ne laser) at 70 degrees incidence angle. Surface roughness was evaluated using an optical profilometer. Specimens were further analyzed under the Scanning Electron Microscopy (SEM) to observe the topographic patterns.Results. ATR FT-IR analysis showed changes in Si-O peaks with enlarged bands around 940 cm(-1). Ellipsometry measurements showed that all post-heat treatment actions reduced the silane film thickness (30.8-33.5 nm) compared to G20 (40 nm). The groups submitted to rinsing in hot water (B groups) showed thinner silane films (9.8-14.4 nm) than those of their corresponding groups (without washing) (30.8-40 nm). Profilometer analysis showed that heat treatments (Ra approximate to 0.10-0.19 mu m; Rq approximate to 0.15-0.26 mu m) provided a smoother surface than the control group (Ra approximate to 0.48 mu m; Rq approximate to 0.65 mu m). Similar patterns were also observed in SEM images.Significance. Heat treatment after MPS silane application improved the silane layer network. Rinsing with boiling water eliminated the outmost unreacted regions of the silane yielding to thinner film thicknesses. (C) 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Influence of Y-TZP ceramic treatment and different resin cements on bond strength to dentin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Cement Shade and Light-curing Unit on Bond Strength of a Ceramic Cemented to Dentin

Purpose: To evaluate the effect of cement shade, light-curing unit, and water storage on tensile bond strength (a) of a feldspathic ceramic resin bonded to dentin.Materials and Methods: The dentin surface of 40 molars was exposed and etched with 37% phosphoric acid, then an adhesive system was applied. Forty blocks of feldspathic ceramic (Vita VM7) were produced. The ceramic surface was etched with 10% hydrofluoric acid for 60 s, followed by the application of a silane agent and a dual-curing resin cement (Variolink II). Ceramic blocks were cemented to the treated dentin using either A3 or transparent (Tr) shade cement that was activated using either halogen or LED light for 40 s. All blocks were stored in 37 degrees C distilled water for 24 h before cutting to obtain non-trimmed bar-shaped specimens (adhesive area = 1 mm(2) +/- 0.1) for the microtensile bond strength test. The specimens were randomly grouped according to the storage time: no storage or stored for 150 days in 37 degrees C distilled water. Eight experimental groups were obtained (n = 30). The specimens were submitted to the tensile bond strength test using a universal testing machine at a crosshead speed of 1 mm/min. The data were statistically analyzed using ANOVA and Tukey's post-hoc tests (alpha = 0.05).Results: The mean bond strength values were significantly lower for the corresponding water stored groups, except for the specimens using A3 resin cement activated by halogen light. There was no significance difference in mean bond strength values among all groups after water storage.Conclusion: Water storage had a detrimental effect under most experimental conditions. For both cement shades investigated (Tr and A3) under the same storage condition, the light-curing units (QTH and LED) did not affect the mean microtensile bond strengths of resin-cemented ceramic to dentin.

Effect of multiple firing and silica deposition on the zirconia-porcelain interfacial bond strength

Objectives. To test the hypothesis that multiple firing and silica deposition on the zirconia surface influence the bond strength to porcelain.Materials and methods. Specimens were cut from yttria-stabilized zirconia blocks and sintered. Half of the specimens (group S) were silica coated (physical vapor deposition (PVD)) via reactive magnetron sputtering before porcelain veneering. The remaining specimens (group N) had no treatment before veneering. The contact angle before and after silica deposition was measured. Porcelain was applied on all specimens and submitted to two (N2 and S2) or three firing cycles (N3 and S3). The resulting porcelain-zirconia blocks were sectioned to obtain bar-shaped specimens with 1 mm(2) of cross-sectional area. Specimens were attached to a universal testing machine and tested in tension until fracture. Fractured surfaces were examined using optical microscopy. Data were statistically analyzed using two-way ANOVA, Tukey's test (alpha = 0.05) and Weibull analysis.Results. Specimens submitted to three firing cycles (N3 and S3) showed higher mean bond strength values than specimens fired twice (N2 and S2). Mean contact angle was lower for specimens with silica layer, but it had no effect on bond strength. Most fractures initiated at porcelain-zirconia interface and propagated through the porcelain.Significance. The molecular deposition of silica on the zirconia surface had no influence on bond strength to porcelain, while the number of porcelain firing cycles significantly affected the bond strength of the ceramic system, partially accepting the study hypothesis. Yet, the Weibull modulus values of S groups were significantly greater than the m values of N groups. (C) 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Nonlinear two-field models from orbit equation deformations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of tectonic-controlled fluvial morphology and sedimentary processes of the western Amazon Basin: an approach using satellite images and digital elevation model

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Behavior of cardiac variables in animals exposed to cigarette smoke

OBJECTIVE: To assess the behavior of cardiac variables in animals exposed to cigarette smoke. METHODS: Two groups of Wistar rats were studied as follows: control group (C), comprising 28 animals; and smoking group (S), comprising 23 animals exposed to cigarette smoke for 30 days. Left ventricular cardiac function was assessed in vivo with transthoracic echocardiography, and myocardial performance was analyzed in vitro in preparations of isolated left ventricular papillary muscle. The cardiac muscle was assessed in isometric contractions with an extracellular calcium concentration of 2.5 mmol/L. RESULTS: No statistical difference was observed in the values of the body variables of the rats and in the mechanical data obtained from the papillary muscle between the control and smoking groups. The values of left ventricular systolic diameter were significantly greater in the smoking animals than in the control animals (C= 3.39 ± 0.4 mm and S= 3.71 ± 0.51 mm, P=0.02). A significant reduction was observed in systolic shortening fraction (C= 56.7 ± 4.2% and S= 53.5 ± 5.3%, P=0.02) and in ejection fraction (C= 0.92 ± 0.02 and S= 0.89 ± 0.04, P=0.01). CONCLUSION: The rats exposed to cigarette smoke had a reduction in left ventricular systolic function, although their myocardial function was preserved.

Shell utilization pattern of the hermit crab Clibanarius vittatus (Crustacea, Anomura) in an estuary at São Vicente, State of São Paulo, Brazil

O objetivo do presente estudo foi avaliar a utilização de conchas de gastrópodes por Clibanarius vittatus (Bosc, 1802), na Praia dos Pescadores, em São Vicente (SP), Brasil. Foram realizadas amostras mensais no período de maio de 2001 a abril de 2003, na região intertidal durante a maré baixa. Todos os animais foram pesados e tiveram o comprimento de seu escudo cefalotorácico mensurados, suas conchas identificadas e medidas quanto ao comprimento (mm), abertura (mm) e peso (g). Capturamos 2.344 ermitões (644 machos, 1.594 fêmeas não-ovígeras, 45 fêmeas ovígeras e 61 em intersexo), utilizando 13 espécies de conchas de gastrópodes, das quais Stramonita haemastoma (Linnaeus, 1767), Cymatium parthenopeum (Von Salis, 1793) e Achatina fulica (Bowdich, 1822) representaram mais de 98% das conchas utilizadas. Obteve-se significativa diferença de tamanho entre os sexos, com machos e indivíduos em intersexo atingindo maior porte físico do que fêmeas. Este padrão influenciou fortemente na ocupação e utilização de conchas, principalmente em A. fulica, que foi a maior concha obtida por C. vittatus, utilizada somente por machos e indivíduos em intersexo. Cymatium parthenopeum foi a única espécie de concha em que se obtiveram elevados coeficientes de determinação para todas os parâmetros analisados. Stramonita haemastoma apresentou elevados e significativos coeficientes de determinação, indicando que esta espécie é o principal recurso de concha ocupada na Praia dos Pescadores.

Antimicrobial activity of 2% chlorhexidine gluconate, 1% sodium hypochlorite and paramonochlorophenol combined with furacin against S. aureus, C. albicans, E. faecalise and P. aureginosa

OBJETIVO: Analisar a ação antimicrobiana da clorexidina a 2%, do hipoclorito de sódio a 1% e do paramonoclorofenol associado ao furacin sobre S aureus, C albicans, E faecalise e P aureginosa. METODOLOGIA: Foram utilizadas 40 placas Petri. Quatro placas foram separadas como controle negativo e em 4 outras, além do meio de cultura, semearam-se os microrganismos, com o círculo de papel, para se obter o controle positivo. em 32 placas seguiu-se a colocação de 4 círculos de filtro de papel esterilizados e impregnados das substâncias testes e controle, depositados em cada quadrante das mesmas. Os grupos foram analisados por 7 dias. Para a verificação dos resultados, usaram-se os halos de inibição de crescimento bacteriano. RESULTADOS: A clorexidina 2% foi significantemente (P<0,05) mais efetiva para todas as cepas microbianas que as demais substâncias. O hipoclorito de sódio a 1% apresentou resultados intermediários. O paramonoclorofenol associado ao furacin (PMC+F) obteve os piores resultados. CONCLUSÃO: A clorexidina obteve os melhores resultados. O PMC+F apresentou os menores halos de inibição.

Aclimatização de mudas de bananeira em substratos contendo resíduo de mineração de areia

Para o rápido crescimento de mudas de bananeiras produzidas por micropropagação é necessário a utilização de substratos com adequadas características físicas, químicas e biológicas. Objetivou-se avaliar os atributos químicos e físicos de diferentes substratos contendo resíduo de mineração de areia e seu efeito sobre o desenvolvimento de mudas micropropagadas de bananeira 'Grande Naine', dispostos em delineamento em blocos ao acaso, com sete substratos e quatro repetições. Os materiais utilizados foram: resíduo de mineração de areia (RMA), Rendimax Floreira® (RF®) e casca de arroz carbonizada (CAC), com os quais se formulou os substratos: S1-100%RMA; S2-50% RMA:50% RF®; S3-50% RMA:50% CAC; S4-50% CAC:50% RF®; S5-25% RMA:37,5% CAC:37,5% RF®; S6-50% RMA:25% CAC:25% RF®; S7-75% RMA:12,5% CAC:12,5% RF®. Amostras dos materiais e dos substratos foram separadas para análises químicas e físicas. Noventa e oito dias após o transplante avaliou-se a altura, o diâmetro do colo, o número de folhas e a massa da matéria seca da parte área e das raízes das plantas. Os pHs dos substratos se encontraram na faixa adequada para o cultivo de plantas em recipientes. A CE diminuiu à medida que se aumentou a dose de RMA nos substratos. Os substratos S2, S6 e o RF® apresentaram resultados superiores para a densidade seca. Os substratos S2, S4, S5, S6 e S7 forneceram plantas superiores em altura e diâmetro do colo e, acrescidos do substrato S1, forneceram plantas superiores também no número de folhas e massa de matéria seca da parte aérea. Conclui-se que o RMA pode ser recomendado para a aclimatização de mudas micropropagadas de bananeira 'Grande Naine', desde que usado em mistura com outros materiais ou substratos, com limite máximo de 75% de inclusão.