Caracterização e gênese de solos construídos após mineração de carvão na mina Boa Vista, município de Minas do Leão, RS

A mineração de carvão em lavra a céu aberto provoca a mistura dos materiais sobrejacentes ao carvão e que são, posteriormente, utilizados no preenchimento das cavas mineradas. O processo de construção dos solos e a mistura podem ocasionar problemas ambientais pelas alterações quimicas e fisicas provocadas nos solos construidos. A fimde comparar solos construidos de diferentes idades, caracterizou-se a coluna geológica. o ~Io natural originale solos construidos de 2 anos e de 24 anos da mina de carvão Boa Vista, no Municípiode Minas do Leão, RS. A descrição morfológicado perfil do solo e as análises quimicas e fisicas demonstram que os solos construidos apresentam sérias limitações físicas, impedindo o desenvolvimento normal da vegetação. Ademais. diferenças quimicas entre os perfis de diferentes idades originam-se principalmente da utilização de materiais geológicos e processos de construção distintos, do que pelos processos pedogenéticos. Quanto à evolução temporal dos solos construidos, observou-se que está fortemente caracterizada pela intemperização acido-sulfatada, intensificando-se na sub-área mais antiga. O potencial de acidificação e o potencial de neutralização determínados na coluna geológica indicam a existência de camadas com alto potencial gerador de Drenagem Ácida de Minas, recomendando-se o cuidado na deposição final destas camadas. Os resultados deste estudo indicam que as propriedades químicas e fisicas determinadas nos solos construidos servem como indicadores para o monitoramentode áreas construídas,visando a prevenção de danos ambientais.

Impactos causados pela privatização no ambiente de trabalho, relações interpessoais e perfil profissional : o caso Embratel

O objetivo do presente trabalho foi verificar o impacto da privatização no ambiente de trabalho, relações interpessoais e perfil profissional dos empregados da Embratel. Para tanto, estudou-se a trajetória da empresa no contexto de estatal, a transição e processo de consolidação como empresa privada de um segmento altamente competitivo. O pnmelro capítulo apresenta a história das comunicações no Brasil, as implicações político-econômicas, o surgimento e desenvolvimento da Embratel. O segundo capítulo estuda cultura organizacional e sua importância na viabilização da gestão de recursos humanos. O terceiro capítulo analisa as formações grupais e as relações interpessoais no ambiente de trabalho. O quarto capítulo investiga as novas políticas de recursos humanos e os elementos que constituem o perfil profissional demandado pelo mercado. O capítulo cinco estuda clima organizacional e interfaces com a motivação e satisfação no trabalho. O sexto capítulo analisa a gestão de recursos humanos na Embratel ao longo de sua existência como estatal e a partir da privatização. O sétimo capítulo apresenta e analisa a pesquisa de clima organizacional realizada na empresa em 2000. Dentre os principais aspectos estudados verifica-se: a Embratel iniciou seu processo de modernização antes da privatização e essa veio acelerar e apresentar novos rumos para a empresa. Sua gestão era até então prejudicada pelo excesso de normas e atendimento a interesses políticos, o que lhe conferia pouca agilidade. A relação do empregado com a empresa se modificou. A nova visão e as modernas políticas de recursos humanos hoje oferecem suporte para a efetivação das mudanças desejadas e necessárias, mas também exige alto grau de adaptabilidade de todos.

Acerca da família nuclear

Este trabalho é motivado por uma questão básica, presente, atual: A família nuclear estaria sofrendo uma transformação em sua organização. Especificamente a dissolubilidade dos laços matrimoniais estaria contribuindo para uma diferente ordenação das relações de parentesco. O modelo familiar proposto, aqui no Brasil, pela Igreja e pela higiene, como procuramos demonstrar no texto, está, ao menos no que diz respeito à classe média da população, sendo descaracterizado por um tipo de relacionamento afetivo diverso do casamento tradicional "até que a morte os separe". Esta pergunta se amplia numa questão maior: ou a organização familiar transforma-se através da história, através das diferentes formações sociais, ou a família nuclear, objeto da nossa pesquisa, é um sempre-existente; ou seja, desde que o homem se aculturou a forma de organização familiar se restringiu, com variações que não passariam de meras exceções, meros desvios da estrutura primordial (a família restrita), como querem alguns autores? A nossa resposta a esta questão é claramente a favor do ponto de vista que afirma a transformação da organização familiar através dos tempos, portanto através da história, e o que é mais importante, através de diferentes formações sociais. Assim sendo, fomos levados, não só pela nossa prática, mas principalmente pela íntima ligação que a pesquisa histórica revela entre o surgimento da psicanálise e a sedimentação do modelo da família restrita, pelo novo poder de "gerir a vida", ou seja, um poder que, ao invés de tirar a vida daqueles que não o servem a contento, se interessa em extrair da vida tudo que de melhor ela pode dar, um poder a quem interessa uma qualidade cada vez maior de corpos, a fim de explorar a maior quantidade possível de produção. A família por si só é um problema. Trata-se de uma instituição que obriga a todas as ciências humanas, inclusive a medicina, a se depararem com ela em suas respectivas práticas, seja esta prática empírica ou teórica. Daí, por tratar-se de um trabalho teórico, tornou-se necessário percorrer vários saberes, os mais notáveis no nosso entender, para poder atingir os nossos objetivos.

Rent dissipation, political viability and the strategic adoption of free trade agreements

This paper studies the political viability of free trade agreements (FTAs). The key element of the analysis is the “rent dissipation” that these arrangements induce: by eliminating intra-bloc trade barriers, an FTA reduces the incentives of the local firms to lobby for higher external tariffs, thereby causing a reduction of the rents created in the lobbying process. The prospect of rent dissipation moderates the governments’ willingness to participate in FTAs; they will support only arrangements that are “substantially” welfare improving, and no FTA that reduces welfare. Rent dissipation also implies that the prospects of political turnover may create strategic reasons for the formation of FTAs. Specifically, a government facing a high enough probability of losing power may want to form a trade bloc simply to “tie the hands” of its successor. An FTA can affect the likelihood of political turnover as well. If the incumbent party has a known bias toward special interests, it may want to commit to less distortionary policies in order to reduce its electoral disadvantage; the rent dissipation effect ensures that an FTA can serve as the vehicle for such a commitment. In nascent/unstable democracies, the incumbent government can use a free trade agreement also to reduce the likelihood of a dictatorial takeover and to “consolidate” democracy – a finding that is consistent with the timing of numerous accessions to and formations of preferential arrangements.

Investigação do papel modulador do Haloperidol sobre os níveis de proteínas relacionadas à plasticidade e preferência por objetos novos em camudongos

Dopamine (DA) is known to regulate both sleep and memory formations, while sleep plays a critical role in the consolidation of different types of memories. We believe that pharmacological manipulation of dopaminergic pathways might disrupt the sleep-wake cycle, leading to mnemonic deficits, which can be observed in both behavioral and molecular levels. Therefore, here we investigated how systemic injections of haloperidol (0.3 mg/kg), immediately after training in dark and light periods, affects learning assessed in the novel object preference test (NOPT) in mice. We also investigated the hippocampal levels of the plasticity-related proteins Zif-268, brain-derived neurotrophic factor (BDNF) and phosphorylated Ca2+/calmodulin-dependent protein kinases II (CaMKII-P) in non-exposed (naïve), vehicle-injected controls and haloperidol-treated mice at 3, 6 and 12 hours after training in the light period. Haloperidol administration during the light period led to a subsequent impairment in the NOPT. In contrast, preference was not observed during the dark period neither in mice injected with haloperidol, nor in vehicle-injected animals. A partial increase of CaMKII-P in the hippocampal field CA3 of vehicle-injected mice was detected at 3h. Haloperidol-treated mice showed a significant decrease in the dentate gyrus of CaMKII-P levels at 3, 6 and 12h; of Zif-268 levels at 6h, and of BDNF levels at 12h after training. Since the mnemonic effects of haloperidol were only observed in the light period when animals tend to sleep, we suggest that these effects are related to REM sleep disruption after haloperidol injection

Avaliação da influência do nacl em pastas de cimento portland para cimentação de poços de petróleo em zonas evaporíticas

One of the major current challenges for oilwell companies is the extraction of oil from evaporitic zones, also known as pre-salt basins. Deep reservoirs are found under thick salt layers formed from the evaporation of sea water. Salt layers seal the flow of oil from underneath rock formations, which store hydrocarbons and increase the probability of success in oil and gas exploration. Oilwells are cemented using Portland-based slurries to promote mechanical stability and zonal isolation. For pre-salt oilwells, NaCl must be added to saturate the cement slurries, however, the presence of salt in the composition of slurries affects their overall behavior. Therefore, the objective of the present study was to evaluate the effect of the addition of 5 to 25% NaCl on selected properties of Portland-based slurries. A series of tests were carried out to assess the rheological behavior, thickening time, free water and ultrassonic compressive strength. In addition, the slurries were also characterized by thermal analysis, X ray diffraction and scanning electron microscopy. The results showed that the addition of NaCl affected the thickening time of the slurries. NaCl contents up to 10% shortened the thickening time of the slurries. On the other hand, concentrations in excess of 20% not only extended the thickening time, but also reduced the strength of hardened slurries. The addition of NaCl resulted in the formation of a different crystalline phase called Friedel´s salt, where free chlorine is bonded to tricalcium aluminate

influência da adição de diferentes sais em pastas de cimento portland para cimentação de poços de petróleo

One of the great challenges at present time related with the materials area concerns of products and processes for use in petroleum industry, more precisely related to the Pre-salt area. Progresses were reached in the last years allowing the drilling of the salt layer, with the time reduction for drilling and larger success at the end. For the oil wells companies the preponderant factor is the technology, however, in spite of the progress, a series of challenges is still susceptible to solutions and one of them refers to the slurries preparation for cementing in those areas. Inside of this context, this study had for objective to analyze the influence of the salts NaCl, KCl, CaSO4 and MgSO4 in strength and chemical structure of the hydrated products. As methodology, they were prepared and analyzed cement slurries with varied concentrations of these salts that are commonly found in the saline formations. The salts concentrations used in formulations of the slurries were of 5%, 15% and 30%. The slurries were formulated with specific weight of 15,8 lb / gal and the cement used was Class G. Strength tests were accomplished in samples cured by 24 hours and 28 days. Also were realized crystallographic characterization (XRD) and morphologic (SEM). In agreement with the presented results, it is observed that the largest resistance values are attributed to the slurries with concentration of 15%. There was reduction of the strength values of the slurries formulated with concentration of 30%. Through the characterization microstructural it was possible to note the salts influence in the main cement hydrated products

Influência da adição do NaCl e KCl em sistemas de pastas contendo sílica para poços de petróleo em zonas evaporíticas e carbonáticas

One of the major challenges faced nowadays by oil companies is the exploration of pre-salt basins. Thick salt layers were formed in remote ages as a consequence of the evaporation of sea water containing high concentrations of NaCl and KCl. Deep reservoirs can be found below salt formations that prevent the outflow of oil, thus improving the success in oil prospection. The slurries used in the cement operations of salt layers must be adequate to the properties of those specific formations. At the same time, their resulting properties are highly affected by the contamination of salt in the fresh state. It is t herefore important to address the effects of the presence of salt in the cement slurries in order to assure that the well sheath is able to fulfill its main role to provide zonal isolation and mechanical stability. In this scenario, the objective of the present thesis work was to evaluate the effect of the presence of NaCl and KCl premixed with cement and 40% silica flour on the behavior of cement slurries. Their effect in the presence of CO2 was also investigated. The rheological behavior of slurries containing NaCl and KCl was evaluated along with their mechanical strength. Thermal and microstructural tests were also carried out. The results revealed that the presence of NaCl and KCl affected the pozzolanic activity of silica flour, reducing the strength of the hardened slurries containing salt. Friedel´s salt was formed as a result of the bonding between free Cl- and tricalcium aluminate. The presence of CO2 also contributed to the degradation of the slurries as a result of a process of carbonation/bicarbonataion

Aplicação de sistemas microemulsionados ácidos em acidificação de poços

Stimulation operations have with main objective restore or improve the productivity or injectivity rate in wells. Acidizing is one of the most important operations of well stimulation, consist in inject acid solutions in the formation under fracture formation pressure. Acidizing have like main purpose remove near wellbore damage, caused by drilling or workover operations, can be use in sandstones and in carbonate formations. A critical step in acidizing operation is the control of acid-formation reaction. The high kinetic rate of this reaction, promotes the consumed of the acid in region near well, causing that the acid treatment not achive the desired distance. In this way, the damage zone can not be bypassed. The main objective of this work was obtain stable systems resistant to the different conditions found in field application, evaluate the kinetic of calcite dissolution in microemulsion systems and simulate the injection of this systems by performing experiments in plugs. The systems were obtained from two non ionic surfactants, Unitol L90 and Renex 110, with sec-butanol and n-butanol like cosurfactants. The oily component of the microemlsion was xilene and kerosene. The acqueous component was a solution of HCl 15-26,1%. The results shown that the microemulsion systems obtained were stable to temperature until 100ºC, high calcium concentrations, salinity until 35000 ppm and HCl concentrations until 25%. The time for calcite dissolution in microemulsion media was 14 times slower than in aqueous HCl 15%. The simulation in plugs showed that microemulsion systems promote a distributed flux and promoted longer channels. The permeability enhancement was between 177 - 890%. The results showed that the microemulsion systems obtained have potential to be applied in matrix acidizing

Formulação e caracterização de pastas espumadas por incorporação de ar e estabilizantes minerais

Cementing operations may occur at various stages of the life cycle of an oil well since its construction until its definitive abandonment. There are some situations in which the interest zones are depleted or have low fracture pressure. In such cases, the adoption of lowdensity cement slurries is an efficient solution. To this end, there are basically three ways to reduce the density of cement slurries: using microspheres, water extending additives or foamed cement. The objective of this study is to formulate, to study and to characterize lowdensity foamed cement, using an air entrainment surfactant with vermiculite or diatomite as water extenders and stabilizers. The methodology consists on preparation and evaluation of the slurries under the American Petroleum Institute (API) and the Brazilian Association of Technical Standards (ABNT) guidelines. Based on calculated densities between 13 and 15 ppg (1.559 and 1.799 g/cm3), the slurries were prepared with fixed surfactant concentration, varying the concentrations of vermiculite and diatomite and were compared with the base slurries. The results of plastic viscosity, yield point and gel strength and the compressive strength for 24 h showed that the slurries presented suitable rheology and mechanical strength for cementing operations in oil wells, and had their densities reduced between 8.40 and 11.89 ppg (1.007 and 1.426 g/cm3). The conclusion is that is possible, under atmospheric conditions, to obtain light weighted foamed cement slurries with satisfactory rheological and mechanical properties by means of air entrainment and mineral additions with extenders and stabilizers effects. The slurries have great potential for cementing operations; applicability in deep wells, in low fracture gradient formations and in depleted zones and bring cost savings by reducing the cementing consumption

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index

Checklist dos mamíferos do Estado de São Paulo, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fauna de formigas (Hymenoptera: Formicidae) atraídas a armadilhas subterrâneas em áreas de Mata Atlântica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Metodologia para avaliação do tempo de cozimento e características tecnológicas associadas em diferentes cultivares de mandioca

O consumo culinário de raízes de mandioca é bastante generalizado em todo o mundo, sendo essa raiz amplamente utilizada na forma cozida, assada, frita ou integrando pratos mais complexos. O objetivo deste trabalho foi definir metodologia, avaliar o tempo de cozimento e algumas características associadas a este processo em 26 cultivares de mandiocas. Avaliaram-se os seguintes parâmetros avaliados foram cor da entrecasca; cor da polpa; dificuldade de soltar a entrecasca; dificuldade de palitar; porcentagem de água absorvida/perdida em relação ao peso dos toletes durante o processo de cozimento; cor dos toletes cozidos; formações de pontuações brancas no interior do tolete; formação de gel em volta dos toletes e tempo de cozimento observado para cozimento de 13 palitos. Ao final da avaliação concluiu-se que as melhores cultivares para utilização como mandioca de mesa foram a SRT-1105 (Mico), Milagrosa RG, Mantiqueira, IAC 522-30, IAC 576-70, sendo a última a que apresentou melhor resultado no teste de cozimento.