Fine spatial pattern of an epiphytic lichen species is affected by habitat conditions in two forest types in the Iberian Mediterranean region

Persistence and abundance of species is determined by habitat availability and the ability to disperse and colonize habitats at contrasting spatial scales. Favourable habitat fragments are also heterogeneous in quality, providing differing opportunities for establishment and affecting the population dynamics of a species. Based on these principles, we suggest that the presence and abundance of epiphytes may reflect their dispersal ability, which is primarily determined by the spatial structure of host trees, but also by host quality. To our knowledge there has been no explicit test of the importance of host tree spatial pattern for epiphytes in Mediterranean forests. We hypothesized that performance and host occupancy in a favourable habitat depend on the spatial pattern of host trees, because this pattern affects the dispersal ability of each epiphyte and it also determines the availability of suitable sites for establishment. We tested this hypothesis using new point pattern analysis tools and generalized linear mixed models to investigate the spatial distribution and performance of the epiphytic lichen Lobaria pulmonaria, which inhabits two types of host trees (beeches and Iberian oaks). We tested the effects on L. pulmonaria distribution of tree size, spatial configuration, and host tree identity. We built a model including tree size, stand structure, and several neighbourhood predictors to understand the effect of host tree on L. pulmonaria. We also investigated the relative importance of spatial patterning on the presence and abundance of the species, independently of the host tree configuration. L. pulmonaria distribution was highly dependent on habitat quality for successful establishment, i.e., tree species identity, tree diameter, and several forest stand structure surrogates. For beech trees, tree diameter was the main factor influencing presence and cover of the lichen, although larger lichen-colonized trees were located close to focal trees, i.e., young trees. However, oak diameter was not an important factor, suggesting that bark roughness at all diameters favoured lichen establishment. Our results indicate that L. pulmonaria dispersal is not spatially restricted, but it is dependent on habitat quality. Furthermore, new spatial analysis tools suggested that L. pulmonaria cover exhibits a distinct pattern, although the spatial pattern of tree position and size was random.

Evolution of the Riparian forest corridor in a large Mediterranean river system

The well-documented re-colonisation of the French large river basins of Loire and Rhone by European otter and beaver allowed the analysis of explanatory factors and threats to species movement in the river corridor. To what extent anthropogenic disturbance of the riparian zone influences the corridor functioning is a central question in the understanding of ecological networks and the definition of restoration goals for river networks. The generalist or specialist nature of target species might be determining for the responses to habitat quality and barriers in the riparian corridor. Detailed datasets of land use, human stressors and hydro-morphological characteristics of river segments for the entire river basins allowed identifying the habitat requirements of the two species for the riparian zone. The identified critical factors were entered in a network analysis based on the ecological niche factor approach. Significant responses to riparian corridor quality for forest cover, alterations of channel straightening and urbanisation and infrastructure in the riparian zone are observed for both species, so they may well serve as indicators for corridor functioning. The hypothesis for generalists being less sensitive to human disturbance was withdrawn, since the otter as generalist species responded strongest to hydro-morphological alterations and human presence in general. The beaver responded the strongest to the physical environment as expected for this specialist species. The difference in responses for generalist and specialist species is clearly present and the two species have a strong complementary indicator value. The interpretation of the network analysis outcomes stresses the need for an estimation of ecological requirements of more species in the evaluation of riparian corridor functioning and in conservation planning.

A language exchange program: sustainability innovation in language and culture engagement

Spanish Educational Laws have been promoting the widespread use of English; as a result, Spanish Uni versities are looking for ways to give students more international training in order to prepare them for a future that will increasingly involve global problems and partnerships. Therefore, the Polytechnic University of Madrid, Spain (UPM), and the University of British Columbia, Okanagan, Canada (UBCO) have come together to offer opportunities for international collaboration and learning, thus facilitating virtual encounters among Spanish and Canadian students. The Language Exchange Program between the UPM and UBCO acts as a model for sustainability innovation in language and culture engagement as the students can interact with native speakers in communication tasks. This interdisciplinary initiative supports the latest methodological principles observed in the Common European Framework for Languages, such as autonomous and life-long learning, self-assessment and peer-assessment as well as the incorporation of new technologies to the learning process. Additionally the ‘virtual’ mobility is provided at no extra cost. This article presents the preliminary results of two virtual exchange programs that have been offering varied forms of study which are venue-independent, and have clearly expanded the range of scenarios for the students on both sides by promoting collaborative work and cultural exchange.

A language exchange program: sustainability innovation in language and culture engagement

The Language Exchange Program between the UPM and UBCO acts as a model for sustainability innovation in language and culture engagement as the students can interact with native speakers in communication tasks. This interdisciplinary initiative supports the latest methodological principles observed in the Common European Framework for Languages [1], such as autonomous and lifelong learning, self-assessment and peer-assessment as well as the incorporation of new technologies to the learning process

Influencia del ejercicio físico desarrollado durante el embarazo en la respuesta cardiaca fetal = Influence of a physical activity program performed during pregnancy on fetal heart response

INTRODUCCIÓN: El riesgo de padecer enfermedades cardiovasculares y los índices de obesidad infantil han ido en aumento durante los últimos años empobreciendo la salud de la población. La Teoría de Barker relaciona el estado de salud de la madre con el desarrollo fetal, asociando a un deficiente estado físico y hábitos de vida negativos de la mujer embarazada con el aumento del riesgo de padecer cardiopatías en la infancia y adolescencia, así como predisponer al recién nacido a padecer sobrepeso y/u obesidad en su vida posterior. Por otro lado los estudios efectuados sobre ejercicio físico durante el embarazo reportan beneficios para salud materna y fetal. Uno de los parámetros más utilizados para comprobar la salud fetal es su frecuencia cardiaca, mediante la que se comprueba el buen desarrollo del sistema nervioso autónomo. Si se observa este parámetro en presencia de ejercicio materno podría encontrarse una respuesta crónica del corazón fetal al ejercicio materno como consecuencia de una adaptación y mejora en el funcionamiento del sistema nervioso autónomo del feto. De esta forma podría mejorar su salud cardiovascular intrauterina, lo que podría mantenerse en su vida posterior descendiendo el riesgo de padecer enfermedades cardiovasculares en la edad adulta. OBJETIVOS: Conocer la influencia de un programa de ejercicio físico supervisado en la frecuencia cardiaca fetal (FCF) en reposo y después del ejercicio materno en relación con gestantes sedentarias mediante la realización de un protocolo específico. Conocer la influencia de un programa de ejercicio físico en el desarrollo del sistema nervioso autónomo fetal, relacionado con el tiempo de recuperación de la FCF. MATERIAL Y MÉTODO: Se diseñó un ensayo clínico aleatorizado multicéntrico en el que participaron 81 gestantes (GC=38, GE=43). El estudio fue aprobado por el comité ético de los hospitales que participaron en el estudio. Todas las gestantes fueron informadas y firmaron un consentimiento para su participación en el estudio. Las participantes del GE recibieron una intervención basada en un programa de ejercicio físico desarrollado durante la gestación (12-36 semanas de gestación) con una frecuencia de tres veces por semana. Todas las gestantes realizaron un protocolo de medida de la FCF entre las semanas 34-36 de gestación. Dicho protocolo consistía en dos test llevados a cabo caminando a diferentes intensidades (40% y 60% de la frecuencia cardiaca de reserva). De este protocolo se obtuvieron las principales variables de estudio: FCF en reposo, FCF posejercicio al 40 y al 60% de intensidad, tiempo de recuperación de la frecuencia cardiaca fetal en ambos esfuerzos. El material utilizado para la realización del protocolo fue un monitor de frecuencia cardiaca para controlar la frecuencia cardiaca de la gestante y un monitor fetal inalámbrico (telemetría fetal) para registrar el latido fetal durante todo el protocolo. RESULTADOS: No se encontraron diferencias estadísticamente significativas en la FCF en reposo entre grupos (GE=140,88 lat/min vs GC= 141,95 lat/min; p>,05). Se encontraron diferencias estadísticamente significativas en el tiempo de recuperación de la FCF entre los fetos de ambos grupos (GE=135,65 s vs GC=426,11 s esfuerzo al 40%; p<,001); (GE=180,26 s vs GC=565,61 s esfuerzo al 60%; p<,001). Se encontraron diferencias estadísticamente significativas en la FCF posejercicio al 40% (GE=139,93 lat/min vs GC=147,87 lat/min; p<,01). No se encontraron diferencias estadísticamente significativas en la FCF posejercicio al 60% (GE=143,74 lat/min vs GC=148,08 lat/min; p>,05). CONLUSIÓN: El programa de ejercicio físico desarrollado durante la gestación influyó sobre el corazón fetal de los fetos de las gestantes del GE en relación con el tiempo de recuperación de la FCF. Los resultados muestran un posible mejor funcionamiento del sistema nervioso autónomo en fetos de gestantes activas durante el embarazo. ABSTRACT INTRODUCTION: The risk to suffer cardiovascular diseases and childhood obesity index has grown in the last years worsening the health around the population. Barker´s Theory related maternal health with fetal development establishing an association between a poorly physical state and an unhealthy lifestyle in the pregnant woman with the risk to suffer heart disease during childhood and adolescence, childhood overweight and/or obese is related to maternal lifestyle. By the other way researches carried out about physical exercise and pregnancy show benefits in maternal and fetal health. One of the most studied parameters to check fetal health is its heart rate, correct fetal autonomic nervous system development and work is also corroborated by fetal heart rate. Looking at this parameter during maternal exercise a chronic response of fetal heart could be found due to an adaptation and improvement in the working of the autonomic nervous system. Therefore its cardiovascular health could be enhanced during its intrauterine life and maybe it could be maintained in its posterior life descending the risk to suffer cardiovascular diseases in adult life. OBJECTIVES: To know the influence of a supervised physical activity program in the fetal heart rate (FHR) at rest, FHR after maternal exercise related to sedentary pregnant women by a FHR assessment protocol. To know the influence of a physical activity program in the development of the autonomic nervous system related to FHR recovery time. MATERIAL AND METHOD: A multicentric randomized clinical trial was design in which 81 pregnant women participated (CG=38, EG=43). The study was approved by the ethics committee of all of the hospitals participating in the study. All of the participants signed an informed consent for their participation in the study. EG participants received an intervention based on a physical activity program carried out during gestation (12-36 gestation weeks) with a three days a week frequency. All of the participants were tested between 34-36 weeks of gestation by a specific FHR assessment protocol. The mentioned protocol consisted in two test performed walking and at a two different intensities (40% and 60% of the reserve heart rate). From this protocol we obtained the main research variables: FHR at rest, FHR post-exercise at 40% and 60% intensity, and FHR recovery time at both walking test. The material used to perform the protocol were a FH monitor to check maternal HR and a wireless fetal monitor (Telemetry) to register fetal beats during the whole protocol. RESULTS: There were no statistical differences in FHR at rest between groups (EG=140,88 beats/min vs CG= 141,95 beats/min; p>,05). There were statistical differences in FHR recovery time in both walking tests between groups (EG=135,65 s vs CG=426,11 s test at 40% intensity; p<,001); (EG=180,26 s vs CG=565,61 s test at 60% intensity; p<,001). Statistical differences were found in FHR post-exercise at 40% intensity between groups (EG=139,93 beats/min vs CG=147,87 beats/min; p<,01). No statistical differences were found in FHR at rest post-exercise at 60% intensity between groups (EG=143,74 beats/min vs CG=148,08 beats/min; p>,05). CONCLUSIONS: The physical activity program performed during gestation had an influence in fetal heart of the fetus from mother in the EG related to FHR recovery time. These results show a possible enhancement on autonomic nervous system working in fetus from active mothers during gestation.

Negative density dependence and environmental heterogeneity effects on tree ferns across succession in a tropical montane forest.

Although tree ferns are an important component of temperate and tropical forests, very little is known about their ecology. Their peculiar biology (e.g., dispersal by spores and two-phase life cycle) makes it difficult to extrapolate current knowledge on the ecology of other tree species to tree ferns. In this paper, we studied the effects of negative density dependence (NDD) and environmental heterogeneity on populations of two abundant tree fern species, Cyathea caracasana and Alsophila engelii, and how these effects change across a successional gradient. Species patterns harbor information on processes such as competition that can be easily revealed using point pattern analysis techniques. However, its detection may be difficult due to the confounded effects of habitat heterogeneity. Here, we mapped three forest plots along a successional gradient in the montane forests of Southern Ecuador. We employed homogeneous and inhomogeneous K and pair correlation functions to quantify the change in the spatial pattern of different size classes and a case-control design to study associations between juvenile and adult tree ferns. Using spatial estimates of the biomass of four functional tree types (short- and long-lived pioneer, shade- and partial shade-tolerant) as covariates, we fitted heterogeneous Poisson models to the point pattern of juvenile and adult tree ferns and explored the existence of habitat dependencies on these patterns. Our study revealed NDD effects for C. caracasana and strong environmental filtering underlying the pattern of A. engelii. We found that adult and juvenile populations of both species responded differently to habitat heterogeneity and in most cases this heterogeneity was associated with the spatial distribution of biomass of the four functional tree types. These findings show the effectiveness of factoring out environmental heterogeneity to avoid confounding factors when studying NDD and demonstrate the usefulness of covariate maps derived from mapped communities.

Trans arquitectura : imaginación, invención e individuación del objeto técnico arquitectónico : transferencia tecnológica desde la industria del transporte al proyecto arquitectónico (1900-1973)

Se presenta la tesis doctoral, titulada ‘TRANS Arquitectura. Imaginación, Invención e individuación del objeto tecnico arquitectónico. Transferencia tecnológica desde la Industria del Transporte al Proyecto de Arquitectura [1900-1973]'’, que aborda la relación entre la Arquitectura y el Objeto Técnico durante la Modernidad.1 La temática de la tesis gravita en torno a la cultura técnica, la cultura material y la historia de la Tecnología del siglo XX. Hipótesis Se sostiene aquí la existencia de unas arquitecturas que se definen como Objetos Técnicos. Para demostrarlo se estudia si éstas comparten las mismas propiedades ontológicas de los objetos técnicos. Industria y Arquitectura La historia de la Arquitectura Moderna es la historia de la Industria Moderna y sus instalaciones industriales, sus productos y artefactos o sus procedimientos y procesos productivos. Fábricas, talleres, acerías, astilleros, minas, refinerías, laboratorios, automóviles, veleros, aviones, dirigibles, transbordadores, estaciones espaciales, electrodomésticos, ordenadores personales, teléfonos móviles, motores, baterías, turbinas, aparejos, cascos, chassis, carrocerías, fuselajes, composites, materiales sintéticos, la cadena de montaje, la fabricación modular, la cadena de suministros, la ingeniería de procesos, la obsolescencia programada… Todos estos objetos técnicos evolucionan constantemente gracias al inconformismo de la imaginación humana, y como intermediarios que son, cambian nuestra manera de relacionarnos con el mundo. La Arquitectura, al igual que otros objetos técnicos, media entre el hombre y el mundo. Con el objetivo de reducir el ámbito tan vasto de la investigación, éste se ha filtrado a partir de varios parámetros y cualidades de la Industria, estableciendo un marco temporal, vinculado con un determinado modo de hacer, basado en la ciencia. El inicio del desarrollo industrial basado en el conocimiento científico se da desde la Segunda Revolución Industrial, por consenso en el último tercio del siglo XIX. Este marco centra el foco de la tesis en el proceso de industrialización experimentado por la Arquitectura desde entonces, y durante aproximadamente un siglo, recorriendo la Modernidad durante los 75 primeros años del siglo XX. Durante este tiempo, los arquitectos han realizado transferencias de imágenes, técnicas, procesos y materiales desde la Industria, que ha servido como fuente de conocimiento para la Arquitectura, y ha evolucionado como disciplina. Para poder abordar más razonablemente un periodo tan amplio, se ha elegido el sector industrial del transporte, que históricamente ha sido, no sólo fuente de inspiración para los Arquitectos, sino también fuente de transferencia tecnológica para la Arquitectura. Conjuntos técnicos como los astilleros, fábricas de automóviles o hangares de aviones, individuos técnicos como barcos, coches o aviones, y elementos técnicos como las estructuras que les dan forma y soporte, son todos ellos objetos técnicos que comparten propiedades con las arquitecturas que aquí se presentan. La puesta en marcha de la cadena móvil de montaje en 1913, se toma instrumentalmente como primer foco temporal desde el que relatar la evolución de numerosos objetos técnicos en la Primera Era de la Máquina; un segundo foco se sitúa en 19582, año de la creación de la Agencia Espacial norteamericana (NASA), que sirve de referencia para situar la Segunda Era de la Máquina. La mayoría de los objetos técnicos arquitectónicos utilizados para probar la hipótesis planteada, gravitan en torno a estas fechas, con un rango de más menos 25 años, con una clara intención de sincronizar el tiempo de la acción y el tiempo del pensamiento. Arquitectura y objeto técnico Los objetos técnicos han estado siempre relacionados con la Arquitectura. En el pasado, el mismo técnico que proyectaba y supervisaba una estructura, se ocupaba de inventar los ingenios y máquinas para llevarlas a cabo. Los maestros de obra, eran verdaderos ‘agentes de transferencia tecnológica’ de la Industria y su conocimiento relacionaba técnicas de fabricación de diferentes objetos técnicos. Brunelleschi inventó varia grúas para construir la cúpula de Santa Maria dei Fiori (ca.1461), seguramente inspirado por la reedición del tratado de Vitruvio, De Architectura (15 A.C.), cuyo último capítulo estaba dedicado a las máquinas de la arquitectura clásica romana, y citaba a inventores como Archimedes. El arquitecto florentino fue el primero en patentar un invento en 1421: una embarcación anfibia que serviría para transportar mármol de Carrara por el río Arno, para su obra en Florencia. J. Paxton. Crystal Palace. London 1851. Viga-columna. Robert McCormick. Cosechadora 1831. 2ª patente, 1845. La Segunda Revolución Industrial nos dejó un primitivo ejemplo moderno de la relación entre la Arquitectura y el objeto técnico. El mayor edificio industrializado hasta la fecha, el Crystal Palace de Londres, obra de Joseph Paxton, fue montado en Londres con motivo de la Gran Exposición sobre la Industria Mundial de 1851, y siempre estará asociado a la cosechadora McCormick, merecedora del Gran Premio del Jurado. De ambos objetos técnicos, podrían destacarse características similares, como su origen industrial, y ser el complejo resultado de un ensamblaje simple de elementos técnicos. Desde la entonces, el desarrollo tecnológico ha experimentado una aceleración continuada, dando lugar a una creciente especialización y separación del conocimiento sobre las técnicas antes naturalmente unidas. Este proceso se ha dado a expensas del conocimiento integrador y en detrimento de la promiscuidad entre la Industria y la Arquitectura. Este es, sin lugar a dudas, un signo consustancial a nuestro tiempo, que provoca un natural interés de los arquitectos y otros tecnólogos, por las transferencias, trans e inter-disciplinareidades que tratan de re-establecer los canales de relación entre los diferentes campos del conocimiento. La emergencia de objetos técnicos como los vehículos modernos a principios del siglo XX (el automóvil, el trasatlántico, el dirigible o el aeroplano) está relacionada directamente con la Arquitectura de la Primera Era de la Máquina. La fascinación de los arquitectos modernos por aquellas nuevas estructuras habitables, se ha mantenido durante más de un siglo, con diferente intensidad y prestando atención a unos objetos técnicos u otros, oscilando entre el dominio del valor simbólico de los vehículos como objetosimágenes, durante el periodo heroico de la Primera Era de la Máquina, y la mirada más inquisitiva durante la Segunda, que perseguía un conocimiento más profundo de la organización de los mismos y del sistema técnico en el que estaban incluidos. La relación homóloga que existe entre arquitecturas y vehículos, por su condición de estructuras habitables, es algo de sobra conocido desde que Le Corbusier utilizara aquellas imágenes de barcos, coches y aviones para ilustrar su manifiesto Vers une architecture, de 1923. Los vehículos modernos han sido los medios con los que transmitir los conceptos que ansiaban transformar las propiedades tradicionales de la Arquitectura, relativas a su factura, su habitabilidad, su duración, su funcionalidad o su estética. Destaca particularmente el caso del automóvil en las décadas de los años 30 y 50, y los vehículos del programa espacial en las décadas de los 60 y 70. El conocimiento y la documentación previa de estos hechos, fueron un buen indicio para identificar y confirmar que el sector industrial del transporte, era un especialmente trascendente y fértil proveedor de casos de transferencia tecnológica para la Arquitectura. La tradición Moderna inaugurada por Le Corbusier en los años 20, ha sido mantenida y defendida por una multitud de arquitectos modernos como Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames o Craig Ellwood, cuyo trabajo, animado por el legado de anteriores tecnólogos como Bucky Fuller o Jean Prouvé, fue fundamental y referencia obligada para la siguiente generación de arquitectos como Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean Kaplicky o Richard Horden, entre otros. Todos ellos han contribuido a engrosar el imaginario del objeto técnico, aportando sus obras arquitectónicas. Estos arquitectos que aparecen repetidamente en el discurrir de la tesis, pertenecen a un mismo linaje, y son agrupados según una estructura ‘genealógica’, que se ha denominado ‘Estirpe Técnica’. Unidos por intereses comunes y similares enfoques o actitudes ante el proyecto de arquitectura, entendida como objeto Técnico, han operado mediante la práctica de la transferencia tecnológica, sin limitarse a las técnicas compositivas propias de la disciplina arquitectónica. Durante la investigación, se ha recopilado una selección de menciones explícitas -hechas por arquitectos- sobre otros objetos técnicos para referirse a la Arquitectura, mostrando las constantes y las variaciones de sus intereses a lo largo del siglo, lo que nos ha llevado a conclusiones como por ejemplo, que los conjuntos técnicos (fábricas de zepelines, aviones, automóviles o trasatlánticos) eran tomados por los arquitectos de la primera Modernidad, como un modelo imaginario, formal y compositivo, mientras que los de la Segunda Era de la Máquina los tomaban como modelo espacial y organizativo para la arquitectura. La mencionada estirpe de tecnólogos incluye líneas de descendencia conocidas, como: EiffelSuchovBehrens GropiusMiesLeCorbusierLodsProuve, en la Europa continental, o una rama británica como: LoudonPaxtonWilliamsStirlingGowan SmithsonsPriceArchigramFosterRogersPiano KaplickyHorden. También podemos encontrar conexiones intercontinentales como Fuller EamesRudolphFosterRogers, o ramificaciones menos previsibles como: LeRicolaisKahn PianoKaplicky, o LeCorbusierFreyLacaton Vassal… Seguramente muchos más merecerían incluirse en esta lista, y de hecho, la tesis asume la imposibilidad de incluirlo todo (por motivos prácticos) aunque contempla la posibilidad de ser ampliada en un futuro. Con lo aquí incluido, se pretende mostrar la continuidad en los enfoques, planteamientos y técnicas de proyectos aplicadas, de los que podemos deducir algunas conclusiones, como por ejemplo, que en los periodos inmediatamente posteriores a las dos Guerras Mundiales, aumentó la intensidad de aportaciones de nuevas imágenes de vehículos, al imaginario del objeto técnico utilizado por los arquitectos, a través de publicaciones y exposiciones. Hoy, cien años después de que Ford pusiera en marcha la cadena móvil de montaje, aún encontramos viva esta tradición en las palabras de un arquitecto, Richard Horden, cuyo trabajo porta consigo –como la información embebida en los elementos técnicos- toda una cultura técnica de una tradición moderna. Horden representa uno de los exponentes de la que he denominado estirpe de tecnólogos. Es por ello que he querido concluir la tesis con una entrevista, realizada en Mayo de 2015, en su estudio de Berkeley Square en Londres (ver Apéndices). Guías Para el desarrollo de la presente tesis, se ha tomado, como principal obra de referencia, otra tesis, titulada El modo de existencia de los objetos técnicos, leída y publicada en 1958 por el filósofo francés Gilbert Simondon [1924-89], dedicada a la ontología del objeto técnico. Esta obra enmarca el enfoque intelectual de la tesis, que entronca con la fenomenología, para movilizar una visión particular de la Arquitectura, a la que sirve como modelo de análisis ontológico para estudiar sus procesos de génesis, invención e individuación. Para el desarrollo de éstos, se ha utilizado como complemento bibliográfico, otra obra del mismo autor, titulada Imaginación e invención 1965-66. En cuanto a las fuentes historiográficas disciplinares, se ha elegido utilizar a Reyner P. Banham [1922-1988] y a Martin E. Pawley [1938-2008] como guías a través de la arquitectura del siglo XX. Sus crónicas sobre la Primera y Segunda Era de la Máquina3 y su obra crítica, han servido como índices desde los que reconstruir el imaginario del objeto técnico moderno, y del que aprovisionarse de proyectos y obras de Arquitectura como casos de estudio para la tesis. Estas obras han servido además como índices de otra bibliografía, que ha sido complementaria a la de éstos. Objetivos de la Tesis El principal objetivo de la tesis es demostrar la hipótesis: si una obra de arquitectura puede ser considerada un objeto técnico y bajo qué condiciones, construyendo un criterio que permita reconocer cuándo una obra de Arquitectura responde a la definición de objeto técnico. Otro objetivo es demostrar la importancia y potencia de la Transferencia tecnológica en el proceso evolutivo de la Arquitectura, y para ello se presentan ejemplos de una metodología de proyecto por ensamblaje, que Martin Pawley denominaba ‘Design by Assembly’. También es un objetivo el de reconstruir un Atlas del Imaginario del objeto técnico moderno, con el fin de conocer mejor las causas, razones y finalidades que llevaron a los arquitectos modernos a perseguir una arquitectura como objeto técnico. Este Atlas permite relacionar panópticamente los distintos objetos técnicos entre sí, revelando la verdadera importancia y trascendencia de aquéllos y las arquitecturas con las que se relacionan. En él, las arquitecturas vuelven a situarse en el contexto más extenso y complejo de la industria y la historia de la tecnología, al que siempre pertenecieron. De este modo, éstas son capaces de desvelar todo el conocimiento -en forma de información- que portan en su propio código ‘genético’, desplegando capítulos completos de cultura tecnológica, tan antigua como la Humanidad y en constante y creciente evolución. Estructura de la tesis Tras una Introducción en la que se presentan algunos de los conceptos principales que se instrumentalizan en la tesis sobre la ontología Simondoniana del objeto técnico y sobre la transferencia tecnológica aplicada al proyecto de Arquitectura, el texto principal de la tesis consta de tres partes: La primera se dedica a la Imaginación, una segunda parte a la Invención y una tercera a Individuación o evolución del objeto técnico. Se termina con una Discusión de la tesis y un apartado de Conclusiones. En la Introducción al objeto técnico, éste se define ontológicamente y se distinguen sus diferentes categorías (conjuntos técnicos, individuos técnicos y elementos técnicos). Se explica el proceso de génesis del objeto técnico y sus fases de imaginación, invención e individuación. También se presentan los conceptos de transducción, tecnicidad y sistema técnico, fundamentales para entender el concepto de transferencia tecnológica que se desarrollará después. La concretización, explica el modo particular de individuación y evolución de los objetos técnicos, un proceso por el que las diferentes partes de un objeto técnico, se integran y tienden hacia la propia convergencia. Aquí se comprueba la efectividad del concepto simondoniano de Transducción, como señal o información transmitida y transformada, y se relaciona con la Transferencia Tecnológica - un proceso sinergético, por el que un sector industrial se beneficia del desarrollo de otro sector- a la que se han referido explícitamente arquitectos e historiadores para explicar sus obras, durante la Segunda Era de la Máquina, y que es determinante para el desarrollo de la Industria. La transferencia tecnológica sería la transmisión del conjunto de conocimientos sobre la técnica, que incluyen su esfera fáctica, pero también la esfera sensible de la experiencia. En su aplicación a la arquitectura, las transferencias se han clasificado según tres tipos: Eidéticas, Tectónicas, Orgánicas. En la primera parte dedicada a la Imaginación del objeto técnico arquitectónico se realiza una reconstrucción ‘arqueológica’ –y parcial- del imaginario del objeto técnico moderno, con la intención de conocer mejor su génesis y la relación con otros objetos técnicos. Las fuentes de ese imaginario se buscan en las instalaciones de la Industria de principios de siglo XX, en particular en las fábricas de vehículos, con la finalidad de comprobar hasta qué punto, esos objetos técnicos fueron importantes para imaginar la Arquitectura moderna. La reconstrucción se continúa hasta la Segunda Era de la Máquina, cuando una nueva mirada más inquisitiva y precisa, se dirige a otras fábricas, vehículos y componentes, interesándose por sus cualidades materiales y organizativas. Transferencias Eidéticas, que operan desde un conocimiento intuitivo y son útiles para transmitir información sobre la esencia de un objeto técnico que sirve de fuente. Conceptos abstractos se transmiten por medio de las imágenes—objeto, para producir una transformación en su equivalente arquitectónico. Fruto de la investigación, se han detectado un grupo de conceptos que han sido objeto de transferencias tecnológicas de naturaleza eidética, provenientes del imaginario del objeto técnico moderno: FABRICADO, HABITABLE, FUNCIONAL, EFICIENTE, OBSOLESCENTE y BELLO. En la segunda parte dedicada a la Invención del objeto técnico arquitectónico, las transferencias también pueden ser Tectónicas, cuando lo que se transmite es una técnica constructiva o estructural aplicada mediante MATERIALES artificiales (como los metales, los composites como el ferrocemento, y el plywood, o las aleaciones como el aluminio) o mediante el ensamblaje de ESTRUCTURAS o partes componentes de otro objeto técnico, (como cascos, fuselajes, carrocerías o aparejos) y tiene como resultado la invención de un nuevo objeto técnico arquitectónico. En la tercera parte dedicada a la individuación, se abordan las transferencias ORGÁNICAS, lo que se transfiere es una técnica organizativa, aplicada a través de PROCEDIMIENTOS que definen la actividad del arquitecto como tecnólogo e inventor de objetos técnicos. Estos procedimientos tienen un efecto transformador en tres instituciones tradicionales para la Arquitectura: la Escuela, el Estudio y la Obra, y sus resultados se resumen en nuevos modelos de organización de la Educación de la Arquitectura, con la aparición de los Talleres de proyectos; nuevos modelos de organización del ejercicio de arquitecto: la Oficina técnica; nuevos modelos de organización del espacio, basados en la organización espacial de la Industria, que da lugar a patrones o Matrices espaciales; un nuevo modelo de organización del proyecto, que utiliza las herramientas gráficas de la industria y el ensamblaje como metodología; y un nuevo modelo de producción arquitectónica, basado en la Industrialización. Tras explicar los conceptos y la génesis del ensamblaje y el montaje, se presenta el proyecto por ensamblaje (Design by assembly) como un método que promueve la invención arquitectónica. Se demuestra utilizando algunos casos analizados en la tesis, en los que se ha realizado alguna transferencia conceptual, constructiva u organizativa. Tras analizar las arquitecturas estudiadas en la tesis, se ha utilizado el método genético propuesto por Simondon para comprender cada evolución particular, reconstruyendo las líneas genealógicas hasta sus ancestros, e identificando una serie de linajes genéticos, que corresponderían con los conjuntos técnicos estudiados en la tesis: el astillero, la fábrica de coches, y la fábrica de aeronaves: los Ancestros de la Modernidad. Los sistemas de organización espacial de estos conjuntos técnicos, están directamente relacionados con el objeto técnico que se produce en él. A partir de ellos se definen una serie de matrices operativas (MILL, SHOP, SHED), que sirven para hacer una taxonomía del objeto técnico arquitectónico. Esto se ejemplifica con algunos proyectos de Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean Kaplicky y Richard Horden. Tesis: Comprobación de la hipótesis Simondon definía ontológicamente el Objeto técnico como aquello de lo que existe génesis y que desarrolla una tendencia hacia la solidaridad y unidad. Para que una Arquitectura pueda ser reconocida como un Objeto técnico, se deben dar una serie de condiciones, en las sucesivas fases que intervienen en su modo de existencia: Imaginación. Estas arquitecturas remiten a un imaginario protagonizado por imágenes-objeto de otros objetos técnicos (conjuntos técnicos, individuos técnicos y elementos técnicos). Esas imágenes-objeto vehiculizan una transferencia eidética de los objetos técnicos que simbolizan. Invención. Estas arquitecturas son el resultado de transferencias tectónicas, que se producen durante el proceso de proyecto, mediante el ensamblaje de materiales, componentes o procedimientos, utilizados en la industria para la producción de otros objetos técnicos. Individuación. Estas arquitecturas evolucionan y se individualizan por concretización, un proceso por el que los objetos técnicos se organizan para seguir su tendencia hacia la integración de sus partes, con el fin de alcanzar la convergencia de funciones en una única estructura. Esta integración tiende hacia la naturalización del objeto técnico, mediante la inclusión simbiótica de sus medios naturales asociados. En este caso, veremos cómo se ha producido transferencias orgánicas, o lo que es lo mismo, cómo los objetos técnicos –en el nivel de los conjuntos técnicos- se han tomado como modelo de organización por la arquitectura. Tras comprobar que de ellas existe una génesis, que evoluciona por las fases de imaginación e invención y concretización, se analiza su imaginario, su materialidad, sus estructuras y su organización, con el fin de detectar patrones y principios organizativos comunes a otros objetos técnicos. Interés de la tesis Desde el comienzo del nuevo siglo, diversos autores han demostrado un renovado interés por definir qué es el proyecto, qué lo constituye para qué sirve. Las aproximaciones al tema provienen de la filosofía analítica (Galle, 2008) o de la filosofía de la tecnología (Verbeek, 2005; Vermaas, 2009) y a menudo versan sobre la relación entre diseño y la cultura material (Dorschel 2003, Boradkar 2010 o Preston 2012). Es importante indicar el reciente y también creciente interés suscitado por la obra del filósofo francés, Gilbert Simondon [1924-1989], reconocida por su importante contribución a la filosofía de la técnica y la fenomenología, y por la influencia en el pensamiento de filósofos como Gilles Deleuze, autor presente en multitud de tesis doctorales e investigaciones teóricas llevadas a cabo en las principales escuelas de Arquitectura de todo el mundo desde los años 90 hasta el presente. La reedición y traducción de la obra de Simondon (ing. 1980, esp. 2008) ha recibido la atención de filósofos actuales como Paolo Virno, Bruno Latour o Bernard Stiegler, que siguen recurriendo a su estudio y análisis para avanzar en su pensamiento, estando por tanto presente en el debate contemporáneo sobre la técnica. Tras su reciente traducción al español, el pensamiento de Simondon ha despertado un gran interés en América Latina, como demuestra la organización de varios congresos y simposios, así como la proliferación de publicaciones en torno a su obra y pensamiento. Las futuras traducciones del resto de sus principales obras, asegurarán una introducción cada vez mayor en la comunidad académica. Se ha procurado presentar una mirada alternativa de la Historia de la Arquitectura Moderna, utilizando como guía a un cronista como Reyner Banham. La Era de la Máquina se ha cruzado con la Mecanología y el “vitalismo técnico” de Simondon, obteniendo como resultado una interpretación fresca, renovada y optimista de algunas de las más importantes obras de Arquitectura del siglo XX, que seguro contribuirán al desarrollo de la del siglo XXI, inmerso ya en el cambio de paradigma hacia la sostenibilidad y la ecología. ABSTRACT 'TRANS architecture. Imagination, invention and technical individuation of the architectural technical object. Technology transfer from the Transport Industry to Architectural Design [1900- 1973]' is a thesis dealing with the relationship between Architecture and the Technical Object during Modernity5. The theme of the thesis revolves around the technical culture, material culture and the history of twentieth-century technology. Hypothesis Held here is the existence of some architectures defined as technical objects. A study has been developed to prove if those architectures share the ontological properties of a technical object. Industry and Architecture The history of Modern Architecture is also the history of modern industry and its facilities, its products and devices, its procedures and production processes. Factories, workshops, steel mills, shipyards, mines, refineries, laboratories, cars, yachts, airplanes, airships, shuttles, space stations, home appliances, personal computers, mobile phones, motors, batteries, turbines, rigs, hulls, chassis, bodies, fuselages , composites and synthetic materials, the assembly line, modular manufacturing, the supply chain, process engineering, the planned obsolescence ... All these technical objects are constantly evolving thanks to the inconsistency of the human imagination and, as our intermediates, keep changing our way of relating and being in the world. Architecture, alike other technical objects, mediates between man and the World. In order to frame the vast field of the research, it has been filtered according to various parameters and qualities of Industry, establishing also a time frame which is related to a particular science-based way of making. The start of an industrial development, based on scientific knowledge is given from the Second Industrial Revolution -by consensus on the last third of the nineteenth century. This frame puts the focus of the thesis in the process of industrialization experienced by the Architecture of at least one century, and tours through Modernity during the first 75 years of the twenieth century. During this time, architects have made transfers of images, techniques, processes and materials from Industry, serving as a source of knowledge and thus allowing Architecture to evolve as a discipline. To reasonably address the enormous scope of the thesis, the industrial sector of transportation has ben chosen. It is not only a historical source of inspiration for architects, but also a traditional source of technology transfer for Modern Architecture. Technical sets such as shipyards, automobile factories or aircraft hangars, technical individuals as boats, cars or planes, and technical elements like the structures shaping and supporting them, are all technical objects which share properties with the architectures here presented. The launch of the moving assembly line in 1913, is instrumentally taken as a first time focus, from which to describe the evolution of many technical objects in the First Machine Age; a second focus could be found in 19586, year of the creation of the North American Space Agency (NASA), serving as a reference to the Second Machine Age. Most architectural technical objects used to test the hypothesis, gravitate around this second focus, in a range of plus or minus 25 years, with a clear intention to synchronize the time for action and time of thought. Architecture and Technical Object Technical objects have always been related to Architecture. In the past, the same technician who planned and oversaw a building structure, invented the devices and machines to carry them out. The foremen were the true 'technology transfer agents' from Industry. Their knowledge naturally related different manufacturing techniques to make diverse technical objects. Brunelleschi invented various cranes to build the dome of Santa Maria dei Fiori in Florence (ca.1461). Probably inspired by the reedition of Vitruvius’ treaty De Architectura (15 BC), whose last chapter was dedicated to the machines of classical Roman architecture and quoted inventors as Archimedes, the florentine architect was the first to patent an invention in 1421: an amphibious craft serving as a means of transportation for Carrara marble along the Arno river. At the daw of the Second Industrial Revolution, whose development was based on the scientific knowledge, we find a primitive modern example of the relationship between Architecture and a Technical Object: The Crystal Palace, built in London for the Great Exhibition of 1851 World Industry and designed by Joseph Paxton, was the largest to date industrialized building, and it will be always associated with the McCormick Reaper, worthy of the Grand Jury’s Prize. Similar characteristics could be emphasized of both technical objects, such as their industrial origin and for being be the complex result of a simple assembly of technical elements. Since then, technological development has experienced a continued acceleration, resulting in an increasing specialization and separation of knowledge about techniques which were naturally attached in the past. This process has happened at the expense of an integrative knowledge and against promiscuity between Industry and Architecture. This is, undoubtedly, an inherent sign of our time, which causes the natural and interest of architects and other technicians about transfers, trans-disciplinarity and inter-disciplinarity, as a reaction to reestablish channels of relationships between these different fields of knowledge. The emergence of technical objects as modern vehicles in the early twentieth century (the car, the Ocean liner, the airship or the airplane) is directly related to the Architecture of the First Machine Age. Modern architects’ fascination for those new ‘inhabitable’ structures has been maintained for over a century, with different intensity and paying attention to one and other technical objets, ranging from the domain of the symbolic value of the vehicles as objectsimages, during heroic period of the First Machine Age, to the more inquisitive glance characterizing the Second Machine Age, which sought a deeper understanding of the organization of such objects and the technical system to which they belonged. The periods immediately following both World Wars, showed a concentrated effort to bring new images of vehicles to the imaginary of architects, by means of publications and exhibitions. The homologous relationship between architectures and vehicles, in their capacity as living structures, is something well known since Le Corbusier used the images of cars, boats and airplanes to illustrate his manifesto, Towards an architecture in 1923. Modern vehicles have been the means by which to convey the concepts eager to transform the traditional attributes of Architecture: those relating to its manufacture, habitability, duration, functionality or aesthetics. The automobile stands out during the 30s and 50s, and the new vehicles of the Space Program satnd in the 60s and 70s. The prior knowledge and documentation of these events were a good indication to identify the industrial sector of Transportation as one of especial importance and as a fertile provider of technology transfer cases for Architecture. The Modern tradition, inaugurated by Le Corbusier in the 20s, has been maintained and defended by a host of modern architects like Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames and Craig Ellwood, whose work - inspired by the legacy of previous technologists as Bucky Fuller or Jean Prouvé- was fundamental and a mandatory reference for the next generation of architects like Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean and Richard Horden Kaplicky, among others. They have all contributed to increase the imaginary of the technical object, adding to it their architectural works. In the passage of the thesis, we repeatedly find a number of architects, who have been grouped according to a 'genealogical' structure, which has been called 'Technical Lineage'. Gathered by common interests and similar views or attitudes to the architectural design, understood as a technical object, they have operated through the practice of technology transfer, without limiting itself to specific compositional techniques of the architectural discipline. During the investigation, a selection of explicit references made by those architects, about other technical objects referring to their Architecture, has been compiled, showing constants and variations in their interests throughout the century, which has led to conclusions such as, having technicians sets (zeppelins factories, airships factories, car factories and shipyards) been taken by the architects of the first Modernity, as their main formal, compositional and imaginary models, while the Second Machine Age had taken them as a spatial and organizational model for their architecture. The above mentioned lineage of technologists includes weel-known ‘seed lines’ as: Eiffel- Suchov-Behrens, Gropius-Mies-LeCorbusier- Lods-Prouve, in continental Europe; British branches as Loudon-Paxton-Williams-Stirling- Gowan-Smithsons-Price-Archigram-Foster- Rogers-Piano-Kaplicky-Horden. And we could also find intercontinental connections as Fuller- Eames-Rudolph-Foster-Rogers, or other less predictable ramifications as LeRicolais-Kahn Piano-Kaplicky, or LeCorbusier-Frey-Lacaton & Vassal... Many more would surely deserve to be included in this list, and indeed, the thesis assumes the impossibility of including them all (for practical reasons) and even contemplates possible future extensions. The material included herein is to demonstrate the continuity in the approaches, statements and in the applied architectural design techniques, from which we can draw some conclusions. Today, one hundred years after Ford put up the moving assembly line, we still find this tradition alive in the words of the architect Richard Horden, whose work carries with it –as with the information embedded in every technical element- the whole techncial culture of a modern tradition. Horden is represented here as one of the exponents of what I have called the lineage of technologists. That is why I wanted to conclude the thesis with an interview to Richard Horden, held in May 2015 in his studio in London's Berkeley Square (see Appendices). Guides For the development of this thesis, another thesis, entitled: The mode of existence of technical objects, is taken as the main reference work. Read and published in 1958 by the French philosopher Gilbert Simondon [1924- 1989], it was dedicated to the ontology of the technical object. This work frames the intellectual approach of the thesis, which connects with phenomenology to mobilize a particular vision of Architecture. It is used as a model of ontological analysis to study its genesis, invention and evolutionary processes. To develop these, another work by the same author, titled Imagination and Invention (1965- 1966) has been used as a bibliographical complement. As for the disciplinary historical sources, Reyner P. Banham [1922-1988] and Martin E. Pawley [1938-2008] have been chosen as guides through the modern Architecture of the twentieth century. Their cronical reports on the First and Second Machine Age and their critical works have served as an index from which to reconstruct the imaginary of the modern technical object in the Machine Age7, and to stock up on projects and works of architecture, used as case studies for the thesis. These works have also been used as triggers for other literatures, which has been complementary to the former. Objectives of the Thesis The main objective of the thesis is to prove its hypothesis: if a work of architecture can be considered a technical object and under what conditions, building then a criterion for recognizing when a work of architecture meets the definition of a technical object. Another aim is to demonstrate the importance and power of Technology Transfer in the evolutionary process of Architecture, and to do it, some examples of a methodology for architectural design that Martin Pawley called 'Design by Assembly' are presented. It is also an objective to reconstruct an Atlas of the imaginary of the modern technical object, in order to better understand the causes, reasons and purposes that led modern architects to pursue architecture as a technical object. This Atlas allows to panoptically relate the various technical objects, revealing the true importance and significance of those and the architecture with whom they interact. Architectures are again at the largest and most complex industrial context and the history of technology, which always belonged. Thus, they are able to reveal all the knowledge-in the shape of information-carried in their own 'genetic' code, displaying full chapters of technological culture as old as mankind and constantly growing and evolving. Thesis: Proving the Hypothesis Simondon ontologically defined the technical object as ‘that of which genesis exists’ and that develops ‘a tendency towards solidarity and unity’. For an architecture to be recognized as a technical object, a number of conditions should be given, in the successive phases involved in their mode of existence: Imagination. These architectures refer to an imaginary featuring images-object other technical objects (technical sets, technical individuals and technical elements). These images are the means to an eidetic transfer of the technical objects which they symbolize. Invention. These architectures are the result of tectonic transfers, which occur during the architectural design process, by assembling materials, components or procedures used in industry for the production of other technical objects. Individuation. These architectures evolve and are individualized by ‘concretization’, a process leading to the full integration of its parts and aiming the full convergence of its functions into a single structure. This integration tends towards the naturalization of the technical object, by means of a symbiotic incorporation of their associated milieus. After checking if there is a genesis of them, which evolves through the phases of imagination and invention and concretization, their imaginary, materiality, structure and organization are analyzed in order to detect patterns and common organizational principles to other technical objects counterparts. Structure The main text of the thesis consists of three parts. Before there is an Introduction to the main concepts that are exploited in the thesis on ontology Simondonian technical object, and technology transfer applied to Architecture. Then a first part covers the Imaginary of the modern technical object, a second part is dedicated to the Invention and a third part to the individuation process The thesis ends with a section for the Discussion and the Conclusions. The Introduction to the technical object, this is ontologically defined and its different categories are distinguished. The process of genesis of the technical object and the phases of imagination, invention and indivuation are explained. Concepts as Transduction, Technicality and Technical system are presented for being fundamental to understand the concept of Technology Transfer that will take place later. The concretization is explained as the particular mode of individuation and evolution of technical objects, a process by which the different parts of a technical object, are integrated and begin a tendency towards a convergence in itself. The first part, dedicated to the Imagination of the architectural technical object presents a parcial "archaeological" reconstruction the imaginary of the modern technical object, intended to better understand its genesis and the relationship with other technical objects. The imaginary sources are searched in the premises of the Industry of the early twentieth century, and particularly in the factories of modern vehicles, in order to see, to what extent these technical objects were important to imagine modern architecture. The reconstruction is continued until the Second Machine Age, when a new, more inquisitive and precise gaze turns to other factories, other vehicles and other components and materials, inquiring now about their organizational qualities. The second part is devoted to the Invention of the architectural technical object. The effectiveness of the simondonian concept of Transduction is checked: a transmitted and transformed sign or information, which relates to Technology Transfer, a synergetic process by which an industrial sector benefits from the development of another sector, to which some architects and historians have explicitly referred to explain their works during Machine Age, and which is crucial for the development of the industry. Technology transfer would be the transmission of a set of information or knowledge about technique, including the factual sphere of technique, but also the sensitive sphere of experience. In their application to Architecture, these transfers have been classified according to three types: Eidetic, Tectonic and Organic. Eidetic Transfers operate from an intuitive knowledge and are useful for transmitting information about the essence of the technical object serving as a source. Abstract concepts are transmitted through the object-images to produce an equivalent transformation in Architecture. A group of concepts that have been the subject of technology transfers of eidetic nature, and have been originated in the imaginary of the modern technical object, have been detected as a result of the research: FABRICATED, INHABITABLE, FUNCTIONAL, EFFICIENT, OBSOLESCENT, and BEAUTIFUL. The transfers can also be Tectonic when, that which is transferred is a constructive or structural technique, applied through artificial MATERIALS such as metals, composites as the ferrocement, or plywood, or alloys such as aluminum; or by means of the assembly of STRUCTURES or parts of other technical objects such as hulls, fuselages, car bodies or rigs, resulting in the invention of a new architectural technical object. In the case of ORGANIC transfers, what is transferred is an organizational technique, applied by means of a set of PROCEDURES defining the activity of the architect as a technologist and inventor of technical objects. These procedures have a transformative effect on three traditional institutions for Architecture: the School, the Atelier and the Work, and the results are summarized in new models of organization of the Education of Architecture, with the onset of the Architectural Design Studios or workshops; new models of organization of the practice of architect: the technical office; and new models of space organization, based on the spatial organization of the industry, resulting in spatial patterns or spatial matrices; a new model of organization of the project, which uses graphical tools and industrail protocols as the assembly as a methodology; a new model of architectural production based on the industrialization. After explaining the concepts and the genesis of assembly and montage, Design by assembly is presented as a method that promotes architectural invention, and is shown using some case studies analyzed in the thesis, in which there has been made some conceptual, constructive or organizational transfer. After analyzing the architectures studied in the thesis, genetic method proposed by Simondon was used to understand every particular evolution, reconstructing their genealogical lines up to their ancestors, identifying a series of genetic lineages, which correspond to the technical sets studied in the thesis : the shipyard, the car factory, and aircraft factory. The real ancestors of Modernity. The spatial organization systems of these technical sets are directly related to the technical object that is fabricated within them. From that point, a number of operational matrices are defined (MILL, SHOP, SHED) and used to make a taxonomy of the architectural technical object. This is exemplified by some projects by architects as Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean and Richard Horden Kaplicky. Interest of the thesis Since the beginning of the new century, several authors have shown a renewed interest in defining what a project is, how it is constituted and what it is for. The approaches to the subject are brought from analytic philosophy (Galle, 2008) or from the philosophy of technology (Verbeek, 2005; Vermaas, 2009) and they often speak about the relationship between design and material culture (Dorschel 2003, 2010 or Preston Boradkar 2012). It is also important to note the recent and growing interest in the work of French philosopher Gilbert Simondon [1924-1989], mainly known for its important contribution to the philosophy of technology and phenomenology of the technical object, and the influence on the thinking of contemporary philosophers as Paolo Virno, Bruno Latour or Gilles Deleuze, being the latter a author present in many doctoral theses and theoretical research conducted at major architecture schools around the world since the 90s to the present. The republication and translation of the work of Simondon (eng. 1980, spn. 2008) has received the attention from current philosophers such as Bernard Stiegler who continues to use its study and analysis to advance his thinking, thus being present in the contemporary debate about the technique. After its recent translation into Spanish, the thought of Simondon has aroused great interest in Latin America, as evidenced by the organization of various conferences and symposia, as well as the proliferation of publications about his work and thought8. Future translations of the rest of his major works, will ensure increased introduction in the academic community. Efforts have been made to present an alternative view of the History of Modern Architecture, using a reporter as Reyner P.Banham as a guide. The Machine Age intersects Simondon’s mechanology and his "technical vitalism", resulting in a fresh, renewed and optimistic interpretation of some of the most important works of Architecture of the twentieth century, which will surely contribute to the development of this century’s Architecture, already immersed in the paradigm shift towards sustainability and ecology.

Towards the Consideration of the U.S. Community College Model to Address the Need for Higher Education Reforms in Ghana

ABSTRACT The higher education systems throughout the continent of Africa are undergoing unprecedented challenges and are considered in crisis. African countries, including Ghana, all have in common ties to their colonial legacy whereby they are confronted with weak policies put in place by their colonizers. Having gained their independence, Africans should now take responsibility for the task of reforming their higher education system. To date, nothing substantial has been accomplished, with serious implications for weakening and damaging the structures of the foundation of their educational systems. This qualitative, single case study utilized a postcolonial theory-critical pedagogy framework, providing guidance for coming to grips with the mindset posed by Ghana's colonial heritage in the postcolonial era, especially in terms of its damaging effects on Ghana's higher education system. The study explores alternative pathways for secondary school students to transition to tertiary education--a problematic transition that currently hinders open access to all and equality in educational opportunity, resulting in a tremendous pool of discontinued students. This transitional problem is directly related to Ghana's crisis in higher education with far reaching consequences. The alternative pathway considered in this study is an adaptation of the U.S. community college model or an integration of its applicable aspects into the current structures of the higher education system already in place. In-depth interviews were conducted with 5 Ghanaian professors teaching at community colleges in the United States, 5 Ghanaian professors teaching at universities in Ghana, and 2 educational consultants from the Ghanaian Ministry of Education. Based on their perspectives of the current state of Ghanaian higher education, analyzed in terms of pedagogy, structure/infrastructure, and curriculum, the participants provided their perceptions of salient aspects of the U.S. community college model that would be applicable to Ghana's situation, along with other recommendations. Access to all, including equality of educational opportunity, was considered essential, followed by adaptability, affordability, practicality, and quality of curriculum content and delivery. Canada's successful adaptation of the U.S. model was also discussed. Findings can help guide consideration of alternative pathways to higher education in Ghana and Africa as a whole.

Developing a Citizen Volunteer Lake Monitoring Program for the Flathead Basin in Northwestern Montana for the early Detection and Prevention of the Introduction of Zebra Mussels and other Aquatic Invasive Species (AIS)

Preventing the introduction of aquatic invasive species (AIS) like zebra and quagga mussels in the U.S. is a high priority. This Capstone demonstrates zebra and quagga mussels are of concern as aquatic invasive species and a volunteer monitoring and intervention program is an effective means for early detection of AIS. This Capstone developed an AIS citizen volunteer lake monitoring program consistent with other programs concerned about AIS prevention and early detection. This Capstone concludes implementing such a voluntary program will help reduce the spread of zebra and quagga mussels and will provide early detection information to appropriate agencies empowered with response actions if species are found.

North Korea's Nuclear Weapon Program : A Critical Analysis

North Korea's regime has one goal, to guarantee its survival. To accomplish that goal it desired the U.S. to maintain a strong presence on the Korean Peninsula to act as an international deterrent against possible foreign occupation of its nation. The DPRK encouraged the U.S. by signing the 1994 Agreed Framework, a formal commitment between the two countries that froze North Korea's nuclear programs in exchange for U.S. energy aid. In 2002 the Bush Administration did not honour its commitment and blamed North Korea for the Agreed Framework's collapse. North Korea retaliated by choosing to become a nuclear nation, an action guaranteed to insure a constant U.S. presence on the Korean Peninsula.

The Indo-Chinese forest ox or kouprey / by Harold Jefferson Coolidge, Jr.

v.54:no.6 (1940)