Neutron-mapping polymer flow: Scattering, flow visualization, and molecular theory

Flows of complex fluids need to be understood at both macroscopic and molecular scales, because it is the macroscopic response that controls the fluid behavior, but the molecular scale that ultimately gives rise to rheological and solid-state properties. Here the flow field of an entangled polymer melt through an extended contraction, typical of many polymer processes, is imaged optically and by small-angle neutron scattering. The dual-probe technique samples both the macroscopic stress field in the flow and the microscopic configuration of the polymer molecules at selected points. The results are compared with a recent tube model molecular theory of entangled melt flow that is able to calculate both the stress and the single-chain structure factor from first principles. The combined action of the three fundamental entangled processes of reptation, contour length fluctuation, and convective constraint release is essential to account quantitatively for the rich rheological behavior. The multiscale approach unearths a new feature: Orientation at the length scale of the entire chain decays considerably more slowly than at the smaller entanglement length.

Finite element analysis of fault bend influence on stick-slip instability along an intra-plate fault

Earthquakes have been recognized as resulting from stick-slip frictional instabilities along the faults between deformable rocks. A three-dimensional finite-element code for modeling the nonlinear frictional contact behaviors between deformable bodies with the node-to-point contact element strategy has been developed and applied here to investigate the fault geometry influence on the nucleation and development process of the stick-slip instability along an intra-plate fault through a typical fault bend model, which has a pre-cut fault that is artificially bent by an angle of 5.6degrees at the fault center. The numerical results demonstrate that the geometry of the fault significantly affects nucleation, termination and restart of the stick-slip instability along the intra-plate fault, and all these instability phenomena can be well simulated using the current finite-element algorithm.

Elucidating the specificity of binding of sulfonylurea herbicides to acetohydroxyacid synthase

Acetohydroxyacid synthase (AHAS, EC 2.2.1.6) is the target for the sulfonylurea herbicides, which act as potent inhibitors of the enzyme. Chlorsulfuron (marketed as Glean) and sulforneturon methyl (marketed as Oust) are two commercially important members of this family of herbicides. Here we report crystal structures of yeast AHAS in complex with chlorsulfuron (at a resolution of 2.19 Angstrom), sulforneturon methyl (2.34 Angstrom), and two other sulfonylureas, metsulfuron methyl (2.29 Angstrom) and tribenuron methyl (2.58 Angstrom). The structures observed suggest why these inhibitors have different potencies and provide clues about the differential effects of mutations in the active site tunnel on various inhibitors. In all of the structures, the thiamin diphosphate cofactor is fragmented, possibly as the result of inhibitor binding. In addition to thiamin diphosphate, AHAS requires FAD for activity. Recently, it has been reported that reduction of FAD can occur as a minor side reaction due to reaction with the carbanion/enamine of the hydroxyethyl-ThDP intermediate that is formed midway through the catalytic cycle. Here we report that the isoalloxazine ring has a bent conformation that would account for its ability to accept electrons from the hydroxyethyl intermediate. Most sequence and mutation data suggest that yeast AHAS is a high-quality model for the plant enzyme.

Measuring and predicting the dynamics of linear monodisperse entangled polymers in rapid flow through an abrupt contraction. A small angle neutron scattering study

Small-angle neutron scattering measurements on a series of monodisperse linear entangled polystyrene melts in nonlinear flow through an abrupt 4:1 contraction have been made. Clear signatures of melt deformation and subsequent relaxation can be observed in the scattering patterns, which were taken along the centerline. These data are compared with the predictions of a recently derived molecular theory. Two levels of molecular theory are used: a detailed equation describing the evolution of molecular structure over all length scales relevant to the scattering data and a simplified version of the model, which is suitable for finite element computations. The velocity field for the complex melt flow is computed using the simplified model and scattering predictions are made by feeding these flow histories into the detailed model. The modeling quantitatively captures the full scattering intensity patterns over a broad range of data with independent variation of position within the contraction geometry, bulk flow rate and melt molecular weight. The study provides a strong, quantitative validation of current theoretical ideas concerning the microscopic dynamics of entangled polymers which builds upon existing comparisons with nonlinear mechanical stress data. Furthermore, we are able to confirm the appreciable length scale dependence of relaxation in polymer melts and highlight some wider implications of this phenomenon.

Identificação e análise dos/as pobres como categoria social: uma pesquisa bíblica a partir de contextos histórico-sociais na subunidade dos Salmos 3-14

A pesquisa, em 5 capítulos, desenvolve o tema dos/as pobres como categoria social nos Sl 3-14, subunidade do primeiro livro do saltério (Sl 3-41). Os Sl 3-14 são atribuídos a Davi, o fato está relacionado com as escolas e suas teologias presentes na edição final do saltério. Esses salmos nasceram nas comunidades camponesas do antigo Israel, posteriormente, foram aperfeiçoados e adaptados por grupos de cantores oficiais no templo de Jerusalém. Os Sl 3-14 se destacam pelo lamento e pela súplica individual. Pertencem a uma coleção pré-exílica, mas concentra textos tardios, do pós-exílio. Os lugares que ocupam foram pensados estrategicamente. Os Sl 9; 10 apresentam conceitos hebraicos que identificam os/as pobres: dak, ani, ebyon. Estes/as designam pequenos/as camponeses/as livres, ainda com acesso à terra. Ao longo do antigo Israel não sofreram mudanças bruscas como categoria social, no entanto, podem assinalar-se algumas características que os/as distinguem nos períodos correspondentes ao primeiro e o segundo templo de Jerusalém. Ademais, os Sl 9; 10 apresentam palavras sinônimas que também os/as identificam: hellkah pobre/infeliz e naqi inocente . Apesar das pequenas variações dos conceitos, todos apontam à uma categoria social, com direito à apelação nos tribunais, embora com fraca influência jurídica. Essa comunidade tem identidade teológica. Javé é apresentado como o seu defensor. A espoliação no saltério é algo dramático, porque o rosto do/a pobre é o próprio rosto de Javé. A pobreza não é um assunto de espiritualidade nem de casualidade. É gerada por um sistema político-social, planejado de forma inteligente, que não permite ao povo da roça progredir como agricultor. Esse setor poderoso, nacional ou estrangeiro, é identificado nos textos, sob os conceitos: goyim nações , sorerim agressores , oyebim inimigos , raxa im injustos . O seu domínio é suportado pela violência e as armas. A ideologia dos sistemas dominantes é fundamental para a interpretação dos textos. A sociedade dos salmistas apresenta crises com relação à identidade humana. A violência e a paz se disputam os espaços. O Sl 8 mostra uma sociedade alternativa pensada a partir daquilo aparentemente fraco: as olelim crianças e os yanaqim lactantes (Sl 8,3). O grito das criancinhas, o grito dos/as oprimidos/as, unido ao grito da criação, se compara à dor de parto, com o qual inicia a vida. Trata-se de um grito que busca transformar os trajetos entortados da história. Esses são indícios da esperança que distingue a teologia dos/as pobres. Os Sl 3-7 e 11-14 continuam a apresentar a situação dos/as pobres. Às vezes, localizam-se os conceitos: ani oprimido e ebyon pobre , outras, recorre-se a novos sinônimos como has͇id fiel e sadiq justo . Esses salmos demonstram que os/as pobres estão presentes também nos textos onde tais conceitos não aparecem. As agrupações (Sl 3-7 e 11-14) são uma pausa na subunidade (Sl 3-14), não uma quebra de sentido com os Sl 8; 9 e 10. Finalmente, se localiza na sociedade dos Sl 3-14, o Modo de Produção Tributário. As teorias das ciências econômica, arqueológica, histórica, contribuem com a compreensão do universo sóciopolítico gerador de pobres.

The mechanics of ultrasonic tube bending

The technology of precision bending of tubes has recently increased in importance and is widely demanded for many industrial applications. However, whilst attention has been concentrated on automation and increasing the production rate of the bending machines, it seems that with one exception very little work has been done in order to understand and therefore fundamentally improve the bending process. A new development for the process of draw-bending of tubes, in which the supporting mandrel is axially vibrated at an ultrasonic frequency, has been perfected. A research programme was undertaken to study the mechanics of tube• bending under both vibratory and non-vibratory conditions. For this purpose, a conventional tube-bending machine was modified and equipped with an oscillatory system. Thin-walled mild steel tubes of different diameter to thickness ratios were bent to mean bend radii having various values from 1.5 to 2.0 times the tube diameter. It was found that the application of ultrasonic vibration reduces the process forces and that the force reduction increases with increasing the vibration amplitude. A reduction in the bending torque of up to 30 per cent was recorded and a reduction in the maximum tube-wall thinning of about 15 per cent was observed. The friction vector reversal mechanism as well as a reduction in friction account for the changes of the forces and the strains. Monitoring the mandrel friction during bending showed, in some cases, that the axial vibration reverses the mandrel .mean force from tension to compression and, thus, the mandrel is assisting the tube motion instead of resisting it. A theory has been proposed to describe the mechanics of deformation during draw-bending of tubes, which embodies the conditions of both "with" and "without" mandrel axial vibration. A theoretical analysis, based on the equilibrium of forces approach, has been developed in which the basic process parameters were taken into consideration. The stresses, the strains and the bending torque were calculated utilising this new solution, and a specially written computer programme was used to perform the computations. It was shown that the theory is in good agreement with the measured values of the strains under vibratory and non-vibratory conditions. Also, the predicted bending 'torque showed a similar trend to that recorded experimentally.

Imidazolium-based warheads strongly influence activity of water-soluble peptidic transglutaminase inhibitors

New peptidic water-soluble inhibitors are reported. In addition to the carboxylate moiety, a new polar warhead was explored. Depending on the size of its substituents, the newly appended imidazolium scaffold designed to enhance the hydrophilic character of the inhibitors could induce a good inhibition for tissue transglutaminase (TG2) and blood coagulation factor XIIIa (FXIIIa). Correlated with the narrow tunnel that hosts the target catalytic cysteine residue, the various modulations suggest a bent conformation of the ligands as the binding pattern mode. Analogues in the dialkylsulfonium series were also tested and showed specificity for TG2 over FXIIIa. © 2013 Elsevier Masson SAS. All rights reserved.

Monitoring of deployment process of shape memory polymers for morphing structures with embedded fibre Bragg grating sensors

This article demonstrates the use of embedded fibre Bragg gratings as vector bending sensor to monitor two-dimensional shape deformation of a shape memory polymer plate. The shape memory polymer plate was made by using thermal-responsive epoxy-based shape memory polymer materials, and the two fibre Bragg grating sensors were orthogonally embedded, one on the top and the other on the bottom layer of the plate, in order to measure the strain distribution in both longitudinal and transverse directions separately and also with temperature reference. When the shape memory polymer plate was bent at different angles, the Bragg wavelengths of the embedded fibre Bragg gratings showed a red-shift of 50 pm/°caused by the bent-induced tensile strain on the plate surface. The finite element method was used to analyse the stress distribution for the whole shape recovery process. The strain transfer rate between the shape memory polymer and optical fibre was also calculated from the finite element method and determined by experimental results, which was around 0.25. During the experiment, the embedded fibre Bragg gratings showed very high temperature sensitivity due to the high thermal expansion coefficient of the shape memory polymer, which was around 108.24 pm/°C below the glass transition temperature (Tg) and 47.29 pm/°C above Tg. Therefore, the orthogonal arrangement of the two fibre Bragg grating sensors could provide a temperature compensation function, as one of the fibre Bragg gratings only measures the temperature while the other is subjected to the directional deformation. © The Author(s) 2013.

Ocular dominance and handedness in golf putting

Purpose: In golf, the impact of eye-hand dominance on putting performance has long been debated. Eye-hand dominance is thought to impact how golfers judge the alignment of the ball with the target and the club with the ball, as well as how golfers visualize the line of the putt when making decisions about the force needed to hit the ball. Previous studies have all measured ocular dominance in primary gaze only, despite golfers spending a significant amount of their time in a putting stance (bent at the hips, head tilted down). Thus, the purpose of this study was to assess ocular dominance in both primary gaze (aligning the ball with the target) and putting gaze (addressing the ball and aligning the club). Methods: This study investigatedmeasuring pointing oculardominance in both primary and putting gaze positions on 31 golfers (14 amateur, 7 club professionals, and 10 top professionals). All playerswere right-handed golfers, although one reported having no hand dominance and one reported being strongly left hand dominant. Results: The results showed that (1) primary and putting gaze ocular dominances are not equal, nor are they predictive of each other; (2) themagnitude of putting ocular dominance is significantly less than themagnitude of primary gaze ocular dominance; (3) ocular dominance is not correlated with handedness in either primary or putting gaze; and (4) eye-hand dominance is not associated with increased putting skill, although ocular dominance may be associated with increased putting success. Conclusions: It is important that coaches assess golfers' ocular dominance in both primary and putting gaze positions to ensure they have the most accurate information upon which to base their vision strategy decisions.

Seismic performance of hybrid fiber reinforced polymer-concrete pier frame systems

As an alternative to transverse spiral or hoop steel reinforcement, fiber reinforced polymers (FRPs) were introduced to the construction industry in the 1980’s. The concept of concrete-filled FRP tube (CFFT) has raised great interest amongst researchers in the last decade. FRP tube can act as a pour form, protective jacket, and shear and flexural reinforcement for concrete. However, seismic performance of CFFT bridge substructure has not yet been fully investigated. Experimental work in this study included four two-column bent tests, several component tests and coupon tests. Four 1/6-scale bridge pier frames, consisting of a control reinforced concrete frame (RCF), glass FRP-concrete frame (GFF), carbon FRP-concrete frame (CFF), and hybrid glass/carbon FRP-concrete frame (HFF) were tested under reverse cyclic lateral loading with constant axial loads. Specimen GFF did not show any sign of cracking at a drift ratio as high as 15% with considerable loading capacity, whereas Specimen CFF showed that lowest ductility with similar load capacity as in Specimen GFF. FRP-concrete columns and pier cap beams were then cut from the pier frame specimens, and were tested again in three point flexure under monotonic loading with no axial load. The tests indicated that bonding between FRP and concrete and yielding of steel both affect the flexural strength and ductility of the components. The coupon tests were carried out to establish the tensile strength and elastic modulus of each FRP tube and the FRP mold for the pier cap beam in the two principle directions of loading. A nonlinear analytical model was developed to predict the load-deflection responses of the pier frames. The model was validated against test results. Subsequently, a parametric study was conducted with variables such as frame height to span ratio, steel reinforcement ratio, FRP tube thickness, axial force, and compressive strength of concrete. A typical bridge was also simulated under three different ground acceleration records and damping ratios. Based on the analytical damage index, the RCF bridge was most severely damaged, whereas the GFF bridge only suffered minor repairable damages. Damping ratio was shown to have a pronounced effect on FRP-concrete bridges, just the same as in conventional bridges. This research was part of a multi-university project, which is founded by the National Science Foundation (NSF) - Network for Earthquake Engineering Simulation Research (NEESR) program.

Controlled growth of carbon nanotubes for high performance nanoelectronics

Unique electrical and mechanical properties of single-walled carbon nanotubes (SWNTs) have made them one of the most promising candidates for next-generation nanoelectronics. Efficient utilization of the exceptional properties of SWNTs requires controlling their growth direction (e.g., vertical, horizontal) and morphologies (e.g., straight, junction, coiled). ^ In this dissertation, the catalytic effect on the branching of SWNTs, Y-shaped SWNTs (Y-SWNTs), was investigated. The formation of Y-shaped branches was found to be dependent on the composition of the catalysts. Easier carbide formers have a strong tendency to attach to the sidewall of SWNTs and thus enhance the degree of branching. Y-SWNTs based field-effect transistors (FETs) were fabricated and modulated by the metallic branch of the Y-SWNTs, exhibiting ambipolar characteristics at room temperature. A subthreshold swing of 700 mV/decade and an on/off ratio of 105 with a low off-state current of 10-13 A were obtained. The transport phenomena associated with Y- and cross-junction configurations reveals that the conduction mechanism in the SWNT junctions is governed by thermionic emission at T > 100 K and by tunneling at T < 100 K. ^ Furthermore, horizontally aligned SWNTs were synthesized by the controlled modification of external fields and forces. High performance carbon nanotube FETs and logic circuit were demonstrated utilizing the aligned SWNTs. It is found that the hysteresis in CNTFETs can be eliminated by removing absorbed water molecules on the CNT/SiO2 interface by vacuum annealing, hydrophobic surface treatment, and surface passivation. SWNT “serpentines” were synthesized by utilization of the interaction between drag force from gas flow and Van der Waals force with substrates. The curvature of bent SWNTs could be tailored by adjusting the gas flow rate, and changing the gas flow direction with respect to the step-edges on a single-crystal quartz substrate. Resistivity of bent SWNTs was observed to increase with curvature, which can be attributed to local deformations and possible chirality shift at curved part. ^ Our results show the successful synthesis of SWNTs having controllable morphologies and directionality. The capability of tailoring the electrical properties of SWNTs makes it possible to build an all-nanotube device by integrating SWNTs, having different functionalities, into complex circuits. ^

Compilation of maximum ingestion and maximum clearance rate data for marine pelagic organisms

The metabolic rate of organisms may either be viewed as a basic property from which other vital rates and many ecological patterns emerge and that follows a universal allometric mass scaling law; or it may be considered a property of the organism that emerges as a result of the organism's adaptation to the environment, with consequently less universal mass scaling properties. Data on body mass, maximum ingestion and clearance rates, respiration rates and maximum growth rates of animals living in the ocean epipelagic were compiled from the literature, mainly from original papers but also from previous compilations by other authors. Data were read from tables or digitized from graphs. Only measurements made on individuals of know size, or groups of individuals of similar and known size were included. We show that clearance and respiration rates have life-form-dependent allometries that have similar scaling but different elevations, such that the mass-specific rates converge on a rather narrow size-independent range. In contrast, ingestion and growth rates follow a near-universal taxa-independent ~3/4 mass scaling power law. We argue that the declining mass-specific clearance rates with size within taxa is related to the inherent decrease in feeding efficiency of any particular feeding mode. The transitions between feeding mode and simultaneous transitions in clearance and respiration rates may then represent adaptations to the food environment and be the result of the optimization of tradeoffs that allow sufficient feeding and growth rates to balance mortality.

Late Glacial and Holocene data from sediment cores MD99-2236 and MD99-2256

The Laurentide Ice Sheet (LIS) was a large, dynamic ice sheet in the early Holocene. The glacial events through Hudson Strait leading to its eventual demise are recorded in the well-dated Labrador shelf core, MD99-2236 from the Cartwright Saddle. We develop a detailed history of the timing of ice-sheet discharge events from the Hudson Strait outlet of the LIS during the Holocene using high-resolution detrital carbonate, ice rafted detritus (IRD), d18O, and sediment color data. Eight detrital carbonate peaks (DCPs) associated with IRD peaks and light oxygen isotope events punctuate the MD99-2236 record between 11.5 and 8.0 ka. We use the stratigraphy of the DCPs developed from MD99-2236 to select the appropriate DeltaR to calibrate the ages of recorded glacial events in Hudson Bay and Hudson Strait such that they match the DCPs in MD99-2236. We associate the eight DCPs with H0, Gold Cove advance, Noble Inlet advance, initial retreat of the Hudson Strait ice stream (HSIS) from Hudson Strait, opening of the Tyrrell Sea, and drainage of glacial lakes Agassiz and Ojibway. The opening of Foxe Channel and retreat of glacial ice from Foxe Basin are represented by a shoulder in the carbonate data. DeltaR of 350 years applied to the radiocarbon ages constraining glacial events H0 through the opening of the Tyrell Sea provided the best match with the MD99-2236 DCPs; DeltaR values and ages from the literature are used for the younger events. A very close age match was achieved between the 8.2 ka cold event in the Greenland ice cores, DCP7 (8.15 ka BP), and the drainage of glacial lakes Agassiz and Ojibway. Our stratigraphic comparison between the DCPs in MD99-2236 and the calibrated ages of Hudson Strait/Bay deglacial events shows that the retreat of the HSIS, the opening of the Tyrell Sea, and the catastrophic drainage of glacial lakes Agassiz and Ojibway at 8.2 ka are separate events that have been combined in previous estimates of the timing of the 8.2 ka event from marine records. SW Iceland shelf core MD99-2256 documents freshwater entrainment into the subpolar gyre from the Hudson Strait outlet via the Labrador, North Atlantic, and Irminger currents. The timing of freshwater release from the LIS Hudson Strait outlet in MD99-2236 matches evidence for freshwater forcing and LIS icebergs carrying foreign minerals to the SW Iceland shelf between 11.5 and 8.2 ka. The congruency of these records supports the conclusion of the entrainment of freshwater from the retreat of the LIS through Hudson Strait into the subpolar gyre and provides specific time periods when pulses of LIS freshwater were present to influence climate.

Stable isotope ratios and paleoceanaographic reconstructions from sediment cores 80-548 and 161-978A

Largely continuous millennial-scale records of benthic d18O, Mg/Ca-based temperature, and salinity variations in bottom waters were obtained from Deep Sea Drilling Project Site 548 (eastern Atlantic continental margin south of Ireland, 1250 m water depth) for the period between 3.7 and 3.0 million years ago. This site monitored mid-Pliocene changes in Mediterranean Outflow Water (MOW) documented by continuously high Nd values between -10.7 and -9. Site 978 (Alboran Sea, 1930 m water depth) provides a complementary record of bottom water variability in the westernmost Mediterranean Sea, which is taken to represent MOW composition at its source. Both sites are marked by a singular and persistent rise in bottom water salinities by 0.7-1.4 psu and in densities by ~1 kg m-3 from 3.5 to 3.3 Ma, which is matched by an average 3 °C increase in bottom water temperatures at Site 548. This event suggests the onset of strongly enhanced deep-water convection in the Mediterranean Sea and a related strengthened MOW flow, which implies a major aridification of the Mediterranean source region. In harmony with model suggestions, the enhanced MOW flow has possibly intensified Upper North Atlantic Deep Water formation.