Influência de diferentes métodos de limpeza sobre a eficiência de corte e as características morfológicas de fresas Carbide

Introduction: Currently, there are many questions regarding the cleaning methods seeking greater efficiency and less loss of burs. Aim: the aim of this study was to evaluate the influence of cleaning methods on the cutting efficiency and morphological characteristics of stainless steel burs tungsten carbide (carbide). Materials and method: Thirty burs were divided into five groups (n = 5) according with the cleaning method: L1 - steel brush, L2 - nylon brush, L3 - ultrasound  +  distilled water, L4 - ultrasound + descaling solution and L5 - no cleaning method (control). The burs were used for the cutting of bovine enamel during six periods of 12 minutes each. After each period, the burs were cleaned (except L5 ) following the protocol established for each group. The cutting efficiency was determined by mass loss and morphological characteristics. Result: The average amount of wear after 72 minutes of use were L1  = 0.3558 g; L2  = 0.4275 g; L3  = 0.4652 g; L4  = 0.4396 g e L5  = 0.4854 g; significant differences in the time of use (p  <  0.001) and cleaning method (p  <  0.001). The L1 group showed the worst performance. Regardless of the experimental group, morphological analysis revealed alterations in the cutting blades soon after the first 12 minutes, being L1 the most affected group. Conclusion: The cleaning with wire brush was the most damaging method to the cutting efficiency and to the morphology of carbide burs.

Reproducibility of microhandeness measurements in different surfices

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hipersensibilidade dentinária cervical: em busca de um tratamento eficaz

The knowledge of the etiology of any disease or condition is paramount to a safe and effective treatment. This literature review aims to show some options to treat dentine hypersensitivity (HSDC). The loss of cervical enamel and cementum exposure of tubules leads to a painful condition and patient discomfort, called HSDC. This loss of tooth structure occurs due to formation of cervical lesions in cases of gingival recession, abrasion, erosion, or abfraction by the association of two or more factors. Some treatments are not effective, but there are effective therapies, such as: application of ferric oxalate, potassium oxalate, potassium nitrate, fluoride varnish, solutions of calcium phosphate, adhesives and Bonding procedures. Therefore, the identification and removal of etiological factors is essential to successful treatment of HSDC normally associated to tubules obliterate and consequent reduction of fluid motion within the dentin.

Interação entre odontologia restauradora e periodontia - parte 1: planejamento e protocolo cirúrgico

Current dental treatments search for alternatives to achieve restablishment of esthetics and function. The increased demand for high esthetic patterns stimulates an interaction between the dental specialties towards a comprehensive treatment in order to solve slinical cases effectively. Knowing the components involved in the dental smile harmony is essential for treatment planning and implementation. It is also important to be aware of the changes that may impair suck harmony and become a patient's complaint. This article addresses a multidisciplinary treatment that involved the integration between Periodontics and Restorative Dentistry. After the surgical-restorative planning, periodontal procedures were performed to obtain an adequate balance between the teeth and soft tiessues.

Correlación entre diferentes métodos de evaluación de color en el clareamiento dental. Correlation between different methods for co

The aim of this study was to evaluate the correlation of color change on bleaching tooth through delta E (ΔE) by the spectrophotometer Spectroshade (SS) and digital program Scanwhite (SW). Methods: 25 patient volunteers were recruited from Operative Dentistry at Universidad de Chile Dental School, between 18 to 30 years, with good oral hygiene. Exclusion criteria: Previous experienced tooth bleaching, anterior restorations, cervical lesions, pain dental, pregnant patient, stained teeth, malposition of the teeth and periodontal pathology. The bleaching was made in two sessions with three different bleaching systems which were randomly. The assessment of color change through ΔE was made on the two upper central incisors (N=50) by the SS and SW. The color in the same teeth were measured before (T0) and after (T1) of the bleaching treatment. Data were analyzed using test Spearman correlation coefficient (Rho) with a significant level of 95%. Results: The results showed a positive and significant correlation (0.676), with a statistically significant difference (p<0.05). Conclusion: There is correlation in the measurement of color change on bleaching tooth by SS and SW.

Análise comparativa da rugosidade superficial de resinas compostas de alta densidade

The success achieved by the use of composite resins in anterior teeth precipitately leads their use in posterior teeth. However, the indiscriminate application of these materials in cavities with several diverse sizes rapidly pointed out their lack of resistance to oclusal and proximal wear. OBJECTIVE: To evaluate the surface roughness of composite resin in relation to finishing and polishing technique. MATERIAL AND METHODS: Eight experimental groups (n = 15) were divided according to finishing and polishing technique: G1 – Z250TM composite resin without surface finishing and polishing; G2 – Z250TM composite resin plus surface finishing and polishing; G3 – P60TM composite resin without surface finishing and polishing; G4 – P60TM composite resin plus surface finishing and polishing; G5 – Prodigy CondensableTM composite resin without surface finishing and polishing; G6 – Prodigy CondensableTM composite resin plus surface finishing and polishing; G7 – SurefillTM composite resin without surface finishing and polishing; G8 – SurefillTM composite resin plus surface finishing and polishing. Three packable and one microhybrid (control group) composite resin was used. The surface roughness was measured using a profilometer at three points in each sample. The results were evaluated by ANOVA and Tukey test (p < 0.05). RESULTS: Prodigy CondensableTM composite resin showed the lowest surface roughness, while SurefillTM showed the highest surface roughness. Comparing the resins used, only between P60TM and SurefillTM there were no statistically significant differences (p > 0,05). CONCLUSION: Surface roughness was lower in all types of resin composites surfaces in contact with Mylar matrix strip than in areas submitted to finishing and polishing procedure.

Estado actual del blanqueamiento: sigue siendo un tratamiento seguro? review

The demand for cosmetic dentistry, including teeth whitening, has increased in recent years. The home teeth whitening and in-office, are widely used in dental practice. The mechanism by which it works is by oxidation of the chromogenic existing tooth structure. This is an effective and minimally invasive procedure that achieves tooth lighten the color, however, may cause alterations in the enamel surface, such as a dental permeability increase. Another effect caused by this procedure is tooth sensitivity, being the most common side effect, up to 65% of individuals have had a secondary effect at least once during treatment. This sensitivity and gingival irritation caused by bleaching may vary depending on the patient and used bleaching product

Enceramento diagnóstico: previsibilidade no tratamento estético indireto

O enceramento diagnóstico é uma ferramenta de grande importância dentro da filosofia atual de excelência estética no tratamento restaurador indireto. Trata-se da reprodução em cera realizada a partir de um modelo de estudo e tem como finalidade observar, em três dimensões, a futura forma final dos dentes, ajudar visualmente na realização do preparo dentário e demonstrar ao paciente o resultado final do tratamento antes mesmo de iniciá-lo, obtendo-se, assim, máxima previsibilidade. O objetivo desse artigo é mostrar, através de casos clínicos, a previsibilidade no tratamento restaurador indireto obtida por meio do enceramento diagnóstico.

Procedimentos conservadores para restabelecimento da estética anterior

A Odontologia atual está direcionada em executar procedimentos cada vez menos invasivos sem perder a objetividade, tais como função e estética. Como tais procedimentos, podemos citar o clareamento dentário e a utilização de resinas compostas diretas, que nos fazem praticar o conceito de uma Odontologia minimamente invasiva. Este artigo tem o objetivo de demonstrar, através de alguns procedimentos conservadores, a possibilidade de se obter resultados satisfatórios.

Carga imediata em implantes unitários: revisão da literatura

The possibilities of treatment with dental implants have revolutionized the field of oral rehabilitation in recent years, bringing a number of advantages over conventional prostheses. For years, a surgical protocol was followed that called for maintaining the implant without load for a certain period for osseointegration, but experimental studies have shown that immediate loading of implants also leads to the formation of peri-implant bone tissue along the time, similarly to that observed for conventionally loaded implants. This study aimed to conduct a literature review regarding the use of this alternative rehabilitation with single implants. The immediate loading of single-tooth replacements is presented as an excellent treatment alternative.

Associação de prótese fixa, implantes e estética periodontal para reabilitação de pacientes parcialmente edêntulos

Periodontitis is a chronic inflammatory disease that results in the destruction of teeth and their supporting tissues with subsequent tooth loss. The replacement of missing teeth for implant-supported restorations has proven to be a highly predictable treatment method with good long-term prognosis. However, some consequences of tooth loss prevents dental implant placement in an ideal position, where regenerative procedures are necessary for this type of rehabilitation. Less invasive procedures such as conventional prosthesis emerge as a therapeutic option in cases where there is enough bone structure for implants and patient´s non-acceptance for invasive procedures. Thus, this paper aims to present the resolution of rehabilitation through a noninvasive and multidisciplinary treatment. One female patient referred to the clinic presented maladaptive bilateral mandibular fixed prostheses, endodontic lesions, gingival recession, and root sensitivity. For proper resolution of this case, an association among osseointegrated implants, fixed partial prosthesis, tooth extraction, and aesthetic periodontal procedures with the use of subepithelial connective tissue graft was proposed. After two years, the patient shows excellent aesthetics and chewing. Within the limits of this scenario, this paper discusses the various factors that may affect the choice of a particular treatment modality for the rehabilitation of edentulous single spaces.

Conhecimento de mães sobre os procedimentos de emergência nos casos de avulsão dentária

Introduction: Despite tooth avulsion following trauma being relatively common in children, the available studies show that adults have limited knowledge about it. Aim: The purpose of this study was to assess, by a questionnaire, the mothers’ general knowledge about the immediate management of tooth avulsion. Material and method: This descriptive study was carried out on a convenient sample of mothers (n= 65) who participated of the “Pastoral da Criança”, from Araraquara, SP, Brazil. The questionnaire comprised 15 questions about personal data and knowledge on tooth avulsion management. Results: Participants were, on average, 35 years old. A total of 30.8% of the mothers reported that their children suffered dental trauma. The majority had never received advice on this subject (76.9%); and did not know how teeth are kept in the dental arch (69.2%). Almost a half of the sample believed that an avulsed tooth can be replanted (49.2%). In relation to the management of tooth avulsion, 40% of them would clean the avulsed tooth with water, even if it was not dirty (38.5%). Most of them (69.2%) would take the tooth by hand for cleaning purposes, regardless the tooth region; and believed that brushing the tooth was important to take the dirty out (67.7%). Conclusion: The general knowledge of mothers about the immediate management of tooth avulsion was considered inadequate endangering the successful treatment of tooth avulsion.

Análise metalográfica do titânio puro submetido à soldagem laser Nd: YAG e TIG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mineral Loss and Morphological Changes in Dental Enamel Induced by a 16% Carbamide Peroxide Bleaching Gel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)