Potencial gravitacional lunar

We know that the orbit of a lunar satellite, and consequently its orbital lifetime is mainly inuenced by the gravitational field of the Moon, Earth and Sun. In this text we study the Lunar gravitational potential and its influence on the gravitational field. We adapted a program in order to map the Moon gravitational field. To that end it was necessary to develop a program that allows the simulation and mapping the lunar full potential. Our program was based on the program developed by Hélio Kuga, and adapted to our case (Moon). We used the model proposed by Konopliv et al. 2001, we proposed various degree and order expansions of spherical harmonics that served us to compare and validate our program

O Raciocínio lógico-matemático: classificação e uso em concursos públicos

This study offers an analysis of classification of the main issues of logic and logical thinking found in competitive tendering and math tests, according to their concepts and characteristics, whether involving mathematics, or not. Moreover, a research on the evolutionary historic processes of logic according to three major crises of the foundations of mathematics was conducted. This research helped to define Logic as a science that is quite distinctive from Mathematics. In order to relate the logical and the mathematical thinking, three types of knowledge, according to Piaget, were presented, with the logical-mathematical one being among them. The study also includes an insight on the basic concepts of propositional and predicative logic, which aids in the classification of issues of logical thinking, formal logic or related to algebraic, and geometric or arithmetic knowledge, according to the Venn diagrams. Furthermore, the key problems - that are most frequently found in tests are resolved and classified, as it was previously described. As a result, the classification in question was created and exemplified with eighteen logic problems, duly solved and explained

Introdução aos sistemas aviônicos de rádio navegação

This work is focused on the subject of air radio navigation systems embedded on aircraft and in the ground stations. Initially is presented a historical context and motivation of the chosen theme. In the following chapters the basics avionics systems are presented, ADF, VOR, DME and ILS such that there is a deepening of electronics theory behind the operation of each system. In this graduate work were presented theories involved in systems such as the definition and creation of radio waves, the frequency spectrum used by each system, the modulation and demodulation of waves, the operating block diagrams of embedded receiver in the aircraft and the terrestrial source station, and the errors involved in the use of each system

Potencial gravitacional lunar

We know that the orbit of a lunar satellite, and consequently its orbital lifetime is mainly inuenced by the gravitational field of the Moon, Earth and Sun. In this text we study the Lunar gravitational potential and its influence on the gravitational field. We adapted a program in order to map the Moon gravitational field. To that end it was necessary to develop a program that allows the simulation and mapping the lunar full potential. Our program was based on the program developed by Hélio Kuga, and adapted to our case (Moon). We used the model proposed by Konopliv et al. 2001, we proposed various degree and order expansions of spherical harmonics that served us to compare and validate our program

Análise climatológica da precipitação e do transporte de umidade na região da ZCAS através da nova geração de reanálises

O conhecimento do desempenho das reanálises e dos erros associados a elas apresenta um papel fundamental na compreensão dos processos físicos que ocorrem na atmosfera. Este trabalho tem por objetivo documentar as principais características da precipitação associada à Zona de Convergência do Atlântico Sul (ZCAS), baseado em seis conjuntos de reanálises atmosféricas (MERRA, ERA-Interim, ERA-40, NCEP 1, NCEP 2 e NCEP CFSR) e cinco conjuntos de produtos observados de precipitação (SALDAS, CPC, CMAP, GPCP e GLDAS). Através destes dados também foi analisado o transporte de umidade sobre a região da ZCAS, para os anos de 1979 a 2007. Em resumo, este trabalho evidencia o avanço das novas reanálises na tentativa de representar de forma mais adequada a variável precipitação acumulada. Os diagramas de Taylor mostram que os produtos de precipitação estão bem correlacionados com o ponto de referência (CPC), com coeficientes entre 0,6 e 0,9. Somente a reanálise do NCEP CFSR possui correlações próximas as dos produtos de precipitação. Os conjuntos mais antigos de reanálises apresentam correlações menores, abaixo de 0,6. O Oceano Atlântico é a fonte principal do fluxo de umidade para a direção da ZCAS, que diminui na direção do continente. Na Região SE do Brasil, a topografia tem um papel importante para a convergência de umidade. Já na parte noroeste da ZCAS, este fator deve estar associado a processos termodinâmicos.

Contribution to assessing the stiffness reduction of structural elements in the global stability analysis of precast concrete multi-storey buildings

This study deals with the reduction of the stiffness in precast concrete structural elements of multi-storey buildings to analyze global stability. Having reviewed the technical literature, this paper present indications of stiffness reduction in different codes, standards, and recommendations and compare these to the values found in the present study. The structural model analyzed in this study was constructed with finite elements using ANSYS® software. Physical Non-Linearity (PNL) was considered in relation to the diagrams M x N x 1/r, and Geometric Non-Linearity (GNL) was calculated following the Newton-Raphson method. Using a typical precast concrete structure with multiple floors and a semi-rigid beam-to-column connection, expressions for a stiffness reduction coefficient are presented. The main conclusions of the study are as follows: the reduction coefficients obtained from the diagram M x N x 1/r differ from standards that use a simplified consideration of PNL; the stiffness reduction coefficient for columns in the arrangements analyzed were approximately 0.5 to 0.6; and the variation of values found for stiffness reduction coefficient in concrete beams, which were subjected to the effects of creep with linear coefficients from 0 to 3, ranged from 0.45 to 0.2 for positive bending moments and 0.3 to 0.2 for negative bending moments.

Mechanical Alterations in airway smooth muscle after interaction with indoor pollutant – A mathematical model.

The viscoelasticity of mammalian lung is determined by the mechanical properties and structural regulation of the airway smooth muscle (ASM). The exposure to polluted air may deteriorate these properties with harmful consequences to individual health. Formaldehyde (FA) is an important indoor pollutant found among volatile organic compounds. This pollutant permeates through the smooth muscle tissue forming covalent bonds between proteins in the extracellular matrix and intracellular protein structure changing mechanical properties of ASM and inducing asthma symptoms, such as airway hyperresponsiveness, even at low concentrations. In the experimental scenario, the mechanical effect of FA is the stiffening of the tissue, but the mechanism behind this effect is not fully understood. Thus, the aim of this study is to reproduce the mechanical behavior of the ASM, such as contraction and stretching, under FA action or not. For this, it was created a two-dimensional viscoelastic network model based on Voronoi tessellation solved using Runge-Kutta method of fourth order. The equilibrium configuration was reached when the forces in different parts of the network were equal. This model simulates the mechanical behavior of ASM through of a network of dashpots and springs. This dashpot-spring mechanical coupling mimics the composition of the actomyosin machinery of ASM through the contraction of springs to a minimum length. We hypothesized that formation of covalent bonds, due to the FA action, can be represented in the model by a simple change in the elastic constant of the springs, while the action of methacholine (MCh) reduce the equilibrium length of the spring. A sigmoid curve of tension as a function of MCh doses was obtained, showing increased tension when the muscle strip was exposed to FA. Our simulations suggest that FA, at a concentration of 0.1 ppm, can affect the elastic properties of the smooth muscle ¯bers by a factor of 120%. We also analyze the dynamic mechanical properties, observing the viscous and elastic behavior of the network. Finally, the proposed model, although simple, incorporates the phenomenology of both MCh and FA and reproduces experimental results observed with in vitro exposure of smooth muscle to FA. Thus, this new mechanical approach incorporates several well know features of the contractile system of the cells in a tissue level model. The model can also be used in different biological scales.

Mechanical alterations in airway smooth muscle after interaction with indoor pollutant - A mathematical model

The viscoelasticity of mammalian lung is determined by the mechanical properties and structural regulation of the airway smooth muscle (ASM). The exposure to polluted air may deteriorate these properties with harmful consequences to individual health. Formaldehyde (FA) is an important indoor pollutant found among volatile organic compounds. This pollutant permeates through the smooth muscle tissue forming covalent bonds between proteins in the extracellular matrix and intracellular protein structure changing mechanical properties of ASM and inducing asthma symptoms, such as airway hyperresponsiveness, even at low concentrations. In the experimental scenario, the mechanical effect of FA is the stiffening of the tissue, but the mechanism behind this effect is not fully w1derstood. Thus, the aim of this study is to reproduce the mechanical behavior of the ASM, such as contraction and stretching, under FA action or not. For this, it was created a two-dimensional viscoelastic network model based on Voronoi tessellation solved using Runge-Kutta method of fourth order. The equilibrium configuration was reached when the forces in different parts of the network were equal. This model simulates the mechanical behavior of ASM through of a network of dashpots and springs. This dashpot-spring mechanical coupling mimics the composition of the actomyosin machinery of ASM through the contraction of springs to a minimum length. We hypothesized that formation of covalent bonds, due to the FA action, can be represented in the model by a simple change in the elastic constant of the springs, while the action of methacholinc (MCh) reduce the equilibrium length of the spring. A sigmoid curve of tension as a function of MCh doses was obtained, showing increased tension when the muscle strip was exposed to FA. Our simulations suggest that FA, at a concentration of 0.1 ppm, can affect the elastic properties of the smooth muscle fibers by a factor of 120%. We also analyze the dynamic mechanical properties, observing the viscous and elastic behavior of the network. Finally, the proposed model, although simple, ir1corporates the phenomenology of both MCh and FA and reproduces experirnental results observed with ir1 vitro exposure of smooth muscle to .FA. Thus, this new mechanical approach incorporates several well know features of the contractile system of the cells ir1 a tissue level model. The model can also be used in different biological scales.

Analisi della rugosità della superficie di rottura di materiali policristallini. An analysis on crack surface roughness in polycrystals

La tesi tratta l'analisi della rugosità della superficie di frattura di un materiale policristallino portato a rottura secondo il modo I. Il continuo viene discretizzato con la tassellazione di Voronoi e la duale triangolazione di Delaunay, da cui si ottiene un traliccio equivalente ovvero il modello del problema. Viene poi effettuata un'analisi elastica incrementale che porta, ad ogni passo, al raggiungimento della soglia di rottura per un elemento del traliccio, delineando così il profilo di rottura. La rugosità del profilo di rottura viene stimata attraverso il calcolo dell'esponente di Hurst, ottenuto dallo studio della funzione di correlazione delle altezze.

Lernen mit einer Hybride aus Lernendem Klassifizierendem System und Selbstorganisierender Karte

Im Forschungsgebiet der Künstlichen Intelligenz, insbesondere im Bereich des maschinellen Lernens, hat sich eine ganze Reihe von Verfahren etabliert, die von biologischen Vorbildern inspiriert sind. Die prominentesten Vertreter derartiger Verfahren sind zum einen Evolutionäre Algorithmen, zum anderen Künstliche Neuronale Netze. Die vorliegende Arbeit befasst sich mit der Entwicklung eines Systems zum maschinellen Lernen, das Charakteristika beider Paradigmen in sich vereint: Das Hybride Lernende Klassifizierende System (HCS) wird basierend auf dem reellwertig kodierten eXtended Learning Classifier System (XCS), das als Lernmechanismus einen Genetischen Algorithmus enthält, und dem Wachsenden Neuralen Gas (GNG) entwickelt. Wie das XCS evolviert auch das HCS mit Hilfe eines Genetischen Algorithmus eine Population von Klassifizierern - das sind Regeln der Form [WENN Bedingung DANN Aktion], wobei die Bedingung angibt, in welchem Bereich des Zustandsraumes eines Lernproblems ein Klassifizierer anwendbar ist. Beim XCS spezifiziert die Bedingung in der Regel einen achsenparallelen Hyperquader, was oftmals keine angemessene Unterteilung des Zustandsraumes erlaubt. Beim HCS hingegen werden die Bedingungen der Klassifizierer durch Gewichtsvektoren beschrieben, wie die Neuronen des GNG sie besitzen. Jeder Klassifizierer ist anwendbar in seiner Zelle der durch die Population des HCS induzierten Voronoizerlegung des Zustandsraumes, dieser kann also flexibler unterteilt werden als beim XCS. Die Verwendung von Gewichtsvektoren ermöglicht ferner, einen vom Neuronenadaptationsverfahren des GNG abgeleiteten Mechanismus als zweites Lernverfahren neben dem Genetischen Algorithmus einzusetzen. Während das Lernen beim XCS rein evolutionär erfolgt, also nur durch Erzeugen neuer Klassifizierer, ermöglicht dies dem HCS, bereits vorhandene Klassifizierer anzupassen und zu verbessern. Zur Evaluation des HCS werden mit diesem verschiedene Lern-Experimente durchgeführt. Die Leistungsfähigkeit des Ansatzes wird in einer Reihe von Lernproblemen aus den Bereichen der Klassifikation, der Funktionsapproximation und des Lernens von Aktionen in einer interaktiven Lernumgebung unter Beweis gestellt.

Analisi quantitativa di alcuni recenti eventi temporaleschi registrati in Emilia-Romagna

Negli ultimi cinque anni, l’Emilia Romagna è stata interessata da 83 fenomeni temporaleschi, che hanno causato allagamenti, smottamenti e anche la perdita di vite umane a Sala Baganza l’11 giugno 2011 e a Rimini il 24 giugno 2013. Nonostante questi fenomeni siano protagonisti di eventi calamitosi, la loro previsione rimane ancora complessa poiché sono eventi localizzati, brevi e molto intesi. Il progetto di Tesi si inserisce in questo contesto e tratta due tematiche principali: la valutazione, quantitativa, della variazione di frequenza degli eventi intensi negli ultimi 18 anni (1995-2012), in relazione ad un periodo storico di riferimento, compreso tra il 1935 ed il 1989 e il confronto tra l’andamento spaziale delle precipitazioni convettive, ottenuto dalle mappe di cumulata di precipitazione oraria dei radar meteorologici e quello ottenuto mediante due tecniche di interpolazione spaziale deterministiche in funzione dei dati pluviometrici rilevati al suolo: Poligoni di Voronoi ed Inverse Distance Weighting (IDW). Si sono ottenuti risultati interessanti nella valutazione delle variazioni dei regimi di frequenza, che hanno dimostrato come questa sembrerebbe in atto per eventi di precipitazione di durata superiore a quella oraria, senza una direzione univoca di cambiamento. Inoltre, dal confronto degli andamenti spaziali delle precipitazioni, è risultato che le tecniche di interpolazione deterministiche non riescono a riprodurre la spazialità della precipitazione rappresentata dal radar meteorologico e che ogni cella temporalesca presenta un comportamento differente dalle altre, perciò non è ancora possibile individuare una curva caratteristica per i fenomeni convettivi. L’approfondimento e il proseguimento di questo ultimo studio potranno portare all’elaborazione di un modello che, applicato alle previsioni di Nowcasting, permetta di valutare le altezze di precipitazione areale, associate a delle celle convettive in formazione e stabilire la frequenza caratteristica dell’evento meteorico in atto a scala spaziale, fornendo indicazioni in tempo reale che possono essere impiegate nelle attività di Protezione Civile.

Design methods and geometric modelling of scaffolds for bone tissue engineering

Every year, thousand of surgical treatments are performed in order to fix up or completely substitute, where possible, organs or tissues affected by degenerative diseases. Patients with these kind of illnesses stay long times waiting for a donor that could replace, in a short time, the damaged organ or the tissue. The lack of biological alternates, related to conventional surgical treatments as autografts, allografts, e xenografts, led the researchers belonging to different areas to collaborate to find out innovative solutions. This research brought to a new discipline able to merge molecular biology, biomaterial, engineering, biomechanics and, recently, design and architecture knowledges. This discipline is named Tissue Engineering (TE) and it represents a step forward towards the substitutive or regenerative medicine. One of the major challenge of the TE is to design and develop, using a biomimetic approach, an artificial 3D anatomy scaffold, suitable for cells adhesion that are able to proliferate and differentiate themselves as consequence of the biological and biophysical stimulus offered by the specific tissue to be replaced. Nowadays, powerful instruments allow to perform analysis day by day more accurateand defined on patients that need more precise diagnosis and treatments.Starting from patient specific information provided by TC (Computed Tomography) microCT and MRI(Magnetic Resonance Imaging), an image-based approach can be performed in order to reconstruct the site to be replaced. With the aid of the recent Additive Manufacturing techniques that allow to print tridimensional objects with sub millimetric precision, it is now possible to practice an almost complete control of the parametrical characteristics of the scaffold: this is the way to achieve a correct cellular regeneration. In this work, we focalize the attention on a branch of TE known as Bone TE, whose the bone is main subject. Bone TE combines osteoconductive and morphological aspects of the scaffold, whose main properties are pore diameter, structure porosity and interconnectivity. The realization of the ideal values of these parameters represents the main goal of this work: here we'll a create simple and interactive biomimetic design process based on 3D CAD modeling and generative algorithmsthat provide a way to control the main properties and to create a structure morphologically similar to the cancellous bone. Two different typologies of scaffold will be compared: the first is based on Triply Periodic MinimalSurface (T.P.M.S.) whose basic crystalline geometries are nowadays used for Bone TE scaffolding; the second is based on using Voronoi's diagrams and they are more often used in the design of decorations and jewellery for their capacity to decompose and tasselate a volumetric space using an heterogeneous spatial distribution (often frequent in nature). In this work, we will show how to manipulate the main properties (pore diameter, structure porosity and interconnectivity) of the design TE oriented scaffolding using the implementation of generative algorithms: "bringing back the nature to the nature".

Rappresentazione della caratteristiche spaziali di eventi temporaleschi di elevata intensità attraverso l'uso combinato di misure da pluviometro e da radar

Il presente lavoro di Tesi si inserisce nell’ambito della previsione e caratterizzazione spaziale di fenomeni convettivi, tipicamente intensi e a carattere locale, come i sistemi temporaleschi organizzati che spesso sono i protagonisti di eventi calamitosi importanti. Lo studio è stato condotto in modo tale da poter apportare un contributo ai sistemi previsionali, i quali attualmente non consentono una valutazione accurata ed una caratterizzazione spaziale attendibile di detti fenomeni temporaleschi (Elisabetta Trovatore, Ecoscienza, numero 4, 2012). Lo scopo è stato quello di verificare l’esistenza caratteristiche spaziali comuni a questa tipologia di eventi di precipitazione mediante un confronto tra la curva di riduzione della precipitazione media all’area, ottenuta dalle mappe di precipitazione cumulata oraria desunte da radar meteorologici e da mappe corrispondenti ricavate a partire dai dati pluviometrici osservati al suolo servendosi di tre modelli di interpolazione spaziale: Kriging ordinario (con variogramma desunto da dati ai pluviometri e da dati al radar), Inverso delle Distanze Pesate (Inverse Distance Weighted, IDW) e Poligoni di Voronoi.Le conclusioni del lavoro di Tesi hanno evidenziato che: - la curva di riduzione della precipitazione valutata da dati radar viene in generale meglio approssimata da due metodi: il Kriging ordinario, che utilizza come modello di variogramma teorico quello dedotto da misure ai pluviometri, e le distanze inverse pesate (IDW, Inverse Distance Weighted); - paragonando le curve di riduzione della precipitazione media all’area dedotte da radar si è potuta notare l’esistenza di quattro curve, di cui tre relative ad eventi che hanno registrato valori elevati di intensità di precipitazione (superiori ai 140 mm/h), che presentano un comportamento analogo, mentre nella porzione superiore del grafico sono presenti due curve che non seguono tale andamento e che sono relative ad eventi convettivi meno intensi; - non esiste una distanza alla quale tutti i variogrammi, desunti da dati radar, raggiungono la stazionarietà ma si è visto come questa, per i sei casi di studio, vari tra 10000 e 25000 metri.

Modeling mechanical response of heterogeneous materials

Heterogeneous materials are ubiquitous in nature and as synthetic materials. These materials provide unique combination of desirable mechanical properties emerging from its heterogeneities at different length scales. Future structural and technological applications will require the development of advanced light weight materials with superior strength and toughness. Cost effective design of the advanced high performance synthetic materials by tailoring their microstructure is the challenge facing the materials design community. Prior knowledge of structure-property relationships for these materials is imperative for optimal design. Thus, understanding such relationships for heterogeneous materials is of primary interest. Furthermore, computational burden is becoming critical concern in several areas of heterogeneous materials design. Therefore, computationally efficient and accurate predictive tools are highly essential. In the present study, we mainly focus on mechanical behavior of soft cellular materials and tough biological material such as mussel byssus thread. Cellular materials exhibit microstructural heterogeneity by interconnected network of same material phase. However, mussel byssus thread comprises of two distinct material phases. A robust numerical framework is developed to investigate the micromechanisms behind the macroscopic response of both of these materials. Using this framework, effect of microstuctural parameters has been addressed on the stress state of cellular specimens during split Hopkinson pressure bar test. A voronoi tessellation based algorithm has been developed to simulate the cellular microstructure. Micromechanisms (microinertia, microbuckling and microbending) governing macroscopic behavior of cellular solids are investigated thoroughly with respect to various microstructural and loading parameters. To understand the origin of high toughness of mussel byssus thread, a Genetic Algorithm (GA) based optimization framework has been developed. It is found that two different material phases (collagens) of mussel byssus thread are optimally distributed along the thread. These applications demonstrate that the presence of heterogeneity in the system demands high computational resources for simulation and modeling. Thus, Higher Dimensional Model Representation (HDMR) based surrogate modeling concept has been proposed to reduce computational complexity. The applicability of such methodology has been demonstrated in failure envelope construction and in multiscale finite element techniques. It is observed that surrogate based model can capture the behavior of complex material systems with sufficient accuracy. The computational algorithms presented in this thesis will further pave the way for accurate prediction of macroscopic deformation behavior of various class of advanced materials from their measurable microstructural features at a reasonable computational cost.

Pasividad en sobredentaduras con implantes ferulizados

Con el advenimiento de los implantes y con ellos la opción de las sobredentaduras, la pasividad comienza a jugar un papel fundamental para darle mejor pronóstico a la rehabilitación y prolongar la vida útil de los implantes. Dentro de este análisis es que se presenta el caso clínico de un paciente que concurre a la clínica de posgrado de la Facultad de Odontología, de sexo masculino, 75 años de edad portador de prótesis completa superior e inferior. Refiere fundamentalmente tener problemas en la dicción y en la masticación. El tratamiento propuesto al paciente fue: dos implantes en el maxilar inferior con una sobredentadura retenida por pilares esféricos y cuatro implantes superiores con una sobredentadura retenida por una barra, la cual feruliza los implantes y tiene en su estructura 3 esferas que dan retención a la prótesis. La barra superior fue colada seccionada en cuatro partes, unidas en boca y luego soldada mediante tecnología Laser. De ésta forma se busca obtener pasividad para evitar que los tornillos de fijación se aflojen, fracturas de tornillos o implantes, reabsorción de los tejidos óseo perimplantarios o pérdida de la oseointegración de los implantes.