The role of nuclear and other conventional power plants in the flexible energy system

This thesis reviews the role of nuclear and conventional power plants in the future energy system. The review is done by utilizing freely accesible publications in addition to generating load duration and ramping curves for Nordic energy system. As the aim of the future energy system is to reduce GHG-emissions and avoid further global warming, the need for flexible power generation increases with the increased share of intermittent renewables. The goal of this thesis is to offer extensive understanding of possibilities and restrictions that nuclear power and conventional power plants have regarding flexible and sustainable generation. As a conclusion, nuclear power is the only technology that is able to provide large scale GHG-free power output variations with good ramping values. Most of the currently operating plants are able to take part in load following as the requirement to do so is already required to be included in the plant design. Load duration and ramping curves produced prove that nuclear power is able to cover most of the annual generation variation and ramping needs in the Nordic energy system. From the conventional power generation methods, only biomass combustion can be considered GHG-free because biomass is considered carbon neutral. CFB combusted biomass has good load follow capabilities in good ramping and turndown ratios. All the other conventional power generation technologies generate GHG-emissions and therefore the use of these technologies should be reduced.

Näin opetan lisäävää valmistusta ja 3D-tulostusta: Pohdintoja uuden teknologian opetuksesta ja koulutuksesta

Additive manufacturing (shortened as AM), or more commonly 3D printing, consists of wide variety of different modern manufacturing technologies. AM is based on direct printing of a digital 3D model to a final product which is fabricated adding material layer by layer. This is from where term additive manufacturing has its origin. It is not only material what is added, but it is also value, properties etc. which are added. AM enables production of different and even better products compared to conventional manufacturing technologies. An estimation of potential of additive manufacturing can be gathered by considering the potential of laser cutting, which is one of the most widely used modern manufacturing technologies. This technique has been used over 40 years, and whole market around this technology is at the moment c. four billion euros and yearly growth is around 10 %. One factor affecting this success of laser cutting is that laser cutting enables radical improvements to products made of flat sheet. AM and 3D printing will do the same for three dimensional parts. Laser devices, which are at the moment used in 3D printing, are globally at the moment only around 1% of all laser devices used in any fabrication technology, so even with a cautious estimate the potential growth of at least 100 % is coming in next few years. Role of education is very important, when this kind of modern technology is industrially implemented. When both generation entering to work life and also generation who has been a while in work life understands new technology, its potential and limitations, this is the point when also product design can be rethought Potential of product design is driving force for wide use of additive manufacturing and 3D printing. Utilization of additive manufacturing and 3D printing is also opportunity for Finland and Finnish industry. This technology can save Finnish manufacturing industry. This technique has stron potential, as Finland has traditionally strong industrial know-how and good ICT knowledge.

Design thinking framework of experience innovation

Innovation remains one of the key drivers of sustainable and successful business. The variety of innovation approaches such as open models, intersectional thinking and co-creation tackles the challenge of viable novel offerings across the world. These approaches have certain similarities and their elements constitute design thinking. Recent market and society trends such as technological advances and globalization have intensify companies’ interaction with customers. Emotional engagement, pleasing communication and delight have gained equal to functionality importance. The complex of these components constitutes consumer experience. Academic research conceptualizes these changes by introducing customer-centered innovation, which replaces product-oriented approaches. However, both methods omit experience concept and provide fragmented explanation of experience innovation. Experience is an essential process of offering perception, which drives customer decisions. Therefore, an agenda of experience innovation development can systemize and explain the mechanisms of experience innovation. The purpose of this study is to create and explain the stage process framework of experience innovation by the means of design thinking approach. The research proceeds in accordance with the following sub-objectives: 1. Conceptualization of consumer experience through customer value. 2. Creation of experience innovation framework by the means of design thinking. This study is conducted by the means of conceptual research methods. The main theoretical contribution of the study is creation of the integrated framework of consumer experience innovation. The elaboration of design thinking agenda and methods applied to experience design builds the guidelines of experience innovation development. This research synthesizes the conceptual elements of the framework that resolves inconsistencies and duplications of theories. This essential clarification simplifies application of the experience innovation agenda, which can be useful for the wide range of specialists, from marketing to strategists, and from managers to entrepreneurs, willing to offer compelling experience to customers. The study highlights the crucial role of consumer experience in maintaining customer loyalty and designs the roadmap of innovating experience through the communication with customers.

Public-private partnership investments in dry ports – Russian logistics markets and risks

The investments have always been considered as an essential backbone and so-called ‘locomotive’ for the competitive economies. However, in various countries, the state has been put under tight budget constraints for the investments in capital intensive projects. In response to this situation, the cooperation between public and private sector has grown based on public-private mechanism. The promotion of favorable arrangement for collaboration between public and private sectors for the provision of policies, services, and infrastructure in Russia can help to address the problems of dry ports development that neither municipalities nor the private sector can solve alone. Especially, the stimulation of public-private collaboration is significant under the exposure to externalities that affect the magnitude of the risks during all phases of project realization. In these circumstances, the risk in the projects also is becoming increasingly a part of joint research and risk management practice, which is viewed as a key approach, aiming to take active actions on existing global and specific factors of uncertainties. Meanwhile, a relatively little progress has been made on the inclusion of the resilience aspects into the planning process of a dry ports construction that would instruct the capacity planner, on how to mitigate the occurrence of disruptions that may lead to million dollars of losses due to the deviation of the future cash flows from the expected financial flows on the project. The current experience shows that the existing methodological base is developed fragmentary within separate steps of supply chain risk management (SCRM) processes: risk identification, risk evaluation, risk mitigation, risk monitoring and control phases. The lack of the systematic approach hinders the solution of the problem of risk management processes of dry port implementation. Therefore, management of various risks during the investments phases of dry port projects still presents a considerable challenge from the practical and theoretical points of view. In this regard, the given research became a logical continuation of fundamental research, existing in the financial models and theories (e.g., capital asset pricing model and real option theory), as well as provided a complementation for the portfolio theory. The goal of the current study is in the design of methods and models for the facilitation of dry port implementation through the mechanism of public-private partnership on the national market that implies the necessity to mitigate, first and foremost, the shortage of the investments and consequences of risks. The problem of the research was formulated on the ground of the identified contradictions. They rose as a continuation of the trade-off between the opportunities that the investors can gain from the development of terminal business in Russia (i.e. dry port implementation) and risks. As a rule, the higher the investment risk, the greater should be their expected return. However, investors have a different tolerance for the risks. That is why it would be advisable to find an optimum investment. In the given study, the optimum relates to the search for the efficient portfolio, which can provide satisfaction to the investor, depending on its degree of risk aversion. There are many theories and methods in finance, concerning investment choices. Nevertheless, the appropriateness and effectiveness of particular methods should be considered with the allowance of the specifics of the investment projects. For example, the investments in dry ports imply not only the lump sum of financial inflows, but also the long-term payback periods. As a result, capital intensity and longevity of their construction determine the necessity from investors to ensure the return on investment (profitability), along with the rapid return on investment (liquidity), without precluding the fact that the stochastic nature of the project environment is hardly described by the formula-based approach. The current theoretical base for the economic appraisals of the dry port projects more often perceives net present value (NPV) as a technique superior to other decision-making criteria. For example, the portfolio theory, which considers different risk preference of an investor and structures of utility, defines net present value as a better criterion of project appraisal than discounted payback period (DPP). Meanwhile, in business practice, the DPP is more popular. Knowing that the NPV is based on the assumptions of certainty of project life, it cannot be an accurate appraisal approach alone to determine whether or not the project should be accepted for the approval in the environment that is not without of uncertainties. In order to reflect the period or the project’s useful life that is exposed to risks due to changes in political, operational, and financial factors, the second capital budgeting criterion – discounted payback period is profoundly important, particularly for the Russian environment. Those statements represent contradictions that exist in the theory and practice of the applied science. Therefore, it would be desirable to relax the assumptions of portfolio theory and regard DPP as not fewer relevant appraisal approach for the assessment of the investment and risk measure. At the same time, the rationality of the use of both project performance criteria depends on the methods and models, with the help of which these appraisal approaches are calculated in feasibility studies. The deterministic methods cannot ensure the required precision of the results, while the stochastic models guarantee the sufficient level of the accuracy and reliability of the obtained results, providing that the risks are properly identified, evaluated, and mitigated. Otherwise, the project performance indicators may not be confirmed during the phase of project realization. For instance, the economic and political instability can result in the undoing of hard-earned gains, leading to the need for the attraction of the additional finances for the project. The sources of the alternative investments, as well as supportive mitigation strategies, can be studied during the initial phases of project development. During this period, the effectiveness of the investments undertakings can also be improved by the inclusion of the various investors, e.g. Russian Railways’ enterprises and other private companies in the dry port projects. However, the evaluation of the effectiveness of the participation of different investors in the project lack the methods and models that would permit doing the particular feasibility study, foreseeing the quantitative characteristics of risks and their mitigation strategies, which can meet the tolerance of the investors to the risks. For this reason, the research proposes a combination of Monte Carlo method, discounted cash flow technique, the theory of real options, and portfolio theory via a system dynamics simulation approach. The use of this methodology allows for comprehensive risk management process of dry port development to cover all aspects of risk identification, risk evaluation, risk mitigation, risk monitoring, and control phases. A designed system dynamics model can be recommended for the decision-makers on the dry port projects that are financed via a public-private partnership. It permits investors to make a decision appraisal based on random variables of net present value and discounted payback period, depending on different risks factors, e.g. revenue risks, land acquisition risks, traffic volume risks, construction hazards, and political risks. In this case, the statistical mean is used for the explication of the expected value of the DPP and NPV; the standard deviation is proposed as a characteristic of risks, while the elasticity coefficient is applied for rating of risks. Additionally, the risk of failure of project investments and guaranteed recoupment of capital investment can be considered with the help of the model. On the whole, the application of these modern methods of simulation creates preconditions for the controlling of the process of dry port development, i.e. making managerial changes and identifying the most stable parameters that contribute to the optimal alternative scenarios of the project realization in the uncertain environment. System dynamics model allows analyzing the interactions in the most complex mechanism of risk management process of the dry ports development and making proposals for the improvement of the effectiveness of the investments via an estimation of different risk management strategies. For the comparison and ranking of these alternatives in their order of preference to the investor, the proposed indicators of the efficiency of the investments, concerning the NPV, DPP, and coefficient of variation, can be used. Thus, rational investors, who averse to taking increased risks unless they are compensated by the commensurate increase in the expected utility of a risky prospect of dry port development, can be guided by the deduced marginal utility of investments. It is computed on the ground of the results from the system dynamics model. In conclusion, the outlined theoretical and practical implications for the management of risks, which are the key characteristics of public-private partnerships, can help analysts and planning managers in budget decision-making, substantially alleviating the effect from various risks and avoiding unnecessary cost overruns in dry port projects.

Effects of overvaluation and exchange rate volatility over industrial investment: empirical evidence and economic policy proposals for Brazil

The present article aims to analyze the recent behavior of real exchange rate in Brazil and its effects over investment per worker in Brazilian manufacturing and extractive industry. Preliminary estimates presented in the article shows an over-valuation of 48% of real exchange rate in Brazil. The reaction between the level (and volatility) of real exchange rate and investment (per worker) in Brazil is analyzed by means of a panel data econometric model for 30 sectors of Brazilian manufacturing and extractive industry. The empirical results show that the level and volatility of real exchange rate has a strong effect over investment per worker in Brazilian industry. Finally, we conclude the article presenting a proposal for a new macroeconomic regime that aims to produce an acceleration of economic growth of Brazilian economy and, by that, a catching-up process with developed countries.

Kahden lämmitysjärjestelmiä valmistavan tuotantoyksikön toimintojen yhdistäminen kustannustehokkuuden lisäämiseksi

Tämä työ käsittelee Oilon Oy:n tehtaan layout -suunnittelua, kun yhdistetään kaksi eri kiinteistössä toimivaa tuotantoyksikköä saman katon alle. Yksiköt ovat Hollolassa toimiva Oilon Home Oy ja Lahden pääkonttorissa toimiva Oilon Industry Oy. Yhdistämisellä haetaan säästöjä tuotantoyksiköiden välisistä logistiikkakuluista sekä kiinteistön vuokra- ja ylläpitokuluista ja samalla tehostetaan tehtaan sisäistä materiaalinkäsittelyä. Oilon Oy on toiminut Lahden pääkonttorissa jo yli 50 vuoden ajan ja sen tuotanto on kokenut historiansa aikana useita pienempiä muutoksia, jotka ovat jättäneet nykyiseen layoutiin paljon toivomisenvaraa. Jotta molemmat tuotantoyksiköt saadaan mahtumaan Lahden yksikköön, on sinne saatava luotua tarvittavat tilat siellä olemassa oleville toiminnoille ja Hollolan yksiköstä saapuville tuotantolinjoille. Työn alussa perehdytään kirjallisuuden avulla siihen kuinka tuotanto on kehittynyt maailmalla lähihistorian aikana, jotta voidaan paremmin ymmärtää Oilon Oy:n nykytilanteeseen johtaneita syitä. Koska Hollolasta saapuville tuotantolinjoille ei ole tarkoitus rakentaa uutta tuotantotilaa, pyritään tilaa vapauttamaan Lahden tehtaalta varastointia tehostamalla ja sen logistiikkaa helpottamalla. Tämän vuoksi vertaillaan yleisimpiä tavaroiden varastointi ratkaisuita sekä tutkitaan kuinka materiaalin käsittelyä voitaisiin tehostaa varastossa ja tuotantosuluissa. Varastoinnin tehostaminen ei kuitenkaan yksin riitä vapauttamaan tarvittavia tiloja, joten layout-muutoksen aikana rakennetaan myös kaksi uuttaa varastohallia. Uudessa layout-suunnitelmassa huomioidaan kunkin solun nykyiset ja tulevat tilantarpeet, sekä rakennetaan ne niin, että työvoimaa voidaan käyttää niissä joustavasti eri tuotteiden valmistamiseen. Tutkimusmetodeina käytetään teemahaastatteluita, joilla selvitetään työntekijöiden tarpeet sekä kirjallisuuden avulla perehdytään Lean-tuotantoon, kanban:iin, 5S:ään ja arvovirta-analyysiin. Näitä soveltamalla saadaan luotua tehokkaasti toimiva kokonaisuus, jolla tavoitellut säästöt saadaan toteutumaan.

Sähkömekaanisen turvalaakerirakenteen suunnittelu

Turvalaakereita käytetään suojaamaan aktiivisia magneettilaakereita vikatilanteiden tapahtuessa. Tässä kandidaatintyössä suunniteltiin erilaisia ratkaisuja toteuttaa turvalaakerin toiminta sähkömekaanisella toimilaitteella. Työn tarkoituksena oli löytää uusia tapoja toteuttaa turvalaakerin rakenne. Uusilla ratkaisuilla poistettiin turvalaakereille ominaisia ongelmia. Suunnittelussa käytettiin perinteisiä koneensuunnittelun menetelmiä. Menetelmien tarkoitus oli mahdollistaa järjestelmällinen suunnittelu. Tässä työssä myös kirjallisuuskatsaus toimi yhtenä suunnittelun vaiheena. Tuloksiksi saatiin hahmotelmia ja 3D-malleja. Tulokset poikkesivat tavanomaisista turvalaakereiden rakenteista. Tuloksissa huomioitiin, että tässä työssä ei suunnitella valmista tuotetta. Suunniteltujen turvalaakereiden toiminta perustui mekanismeihin, jotka toivat mukanaan uusia ominaisuuksia. Sähkömekaanisen toimilaitteen sijoittaminen mekanismeihin oli kuitenkin vaikeaa. Työn tulokset avasivat uusia näkökulmia turvalaakerirakenteiden jatkokehittämiseen.

Female administrators and the mentors who give them full support /

A looming attrition rate, a steady increase in the number of women in administration, and a lack of Canadian research all provided the rationale for this study. The problem in this study was to investigate the needs and challenges of new female administrators and to examine the role that mentors play in addressing these issues. This study also explored the perceived benefits of having a mentor. This study examined the inductive year of 33 female administrators from 3 Ontario school boards. It was a qualitative and quantitative design, using questionnaire and interview data. It was found that the majority felt that they struggled with biases and expectations that were gender specific. The challenges that were perceived to be most prevalent were categorized into 4 thematic areas: Maintaining Balance, Feeling Pressured, The Perceptions of Others, and Being Challenged by Others. Regarding the benefits of mentoring, the participants perceived mentoring to be most beneficial in terms of professional growth, followed by learning how to run a school, and then career advancement. The significance of this study was threefold: it had theoretical implications as well as implications for practice and future research. Suggestions included: facilitating longitudinal relationships, having the board become more actively involved in facilitating the relationship, and implementing an internship program. This study attempted to extend the current literature by theorizing that a mentorship is cyclical in nature. Future research could include program design and implementation, as well as providing consistent and accessible mentoring opportunities for all.

Investigative links between cognitive function and moderate-to-vigorous physical activity in elementary physical education

Research has noted both physical and psychosocial benefits when children participate in regular physical activity. Recent studies are indicating that there may also be academic benefits and that students may be more efficient learners with participation in physical activity. This study investigated the influence of acute moderate-to-vigorous physical activity on four cognitive functions: planning, attention, simultaneous processing, and successive processing. Three classes (59 students) were each tested twice using a balanced design (intervention, balance, and control groups). It was found that the intervention group had a large increase in planning abiHty (ES = 1.67) when compared to the balance (ES = .80) and control (ES = -.89) groups. On the three remaining cognitive functions, the intervention group showed effect sizes similar to that of the balance and control groups. These results indicate that improved planning after physical activity may playa role in improving student performance.

Engineers and technicians : the effect of cognitive style and gender on visual information processing

The purpose of this project was to identify in a subject group of engineers and technicians (N = 62) a preferred mode of representation for facilitating correct recall of information from complex graphics. The modes of representation were black and white (b&w) block, b&w icon, color block, and color icon. The researcher's test instrument included twelve complex graphics (six b&w and six color - three per mode). Each graphics presentation was followed by two multiple-choice questions. Recall performance was better using b&w block mode graphics and color icon mode graphics. A standardized test, the Group Embedded Figures Test (GEFT) was used to identify a cognitive style preference (field dependence). Although engineers and technicians in the sample were strongly field-independent, they were not significantly more field-independent than the normative group in the Witkin, Oltman, Raskin, and Karp study (1971). Tests were also employed to look for any significant difference in cognitive style preference due to gender. None was found. Implications from the project results for the design of visuals and their use in technical training are discussed.

The relation of attentional, emotional, and social regulation to cognitive competence, from infancy to school entry

Recent research on the sources of cognitive competence in infancy and early childhood has highlighted the role of social and emotional factors (for example, Lewis, 1993b). Exploring the roots of competence requires a longitudinal and multivariate approach. To deal with the resulting complexity, potentially integrative theoretical constructs are required. One logical candidate is self-regulation. Three key developmental questions were the focus of this investigation. 1) Does infant self-regulation (attentional, emotional, and social) predict preschool cognitive competence? 2) Does infant self-regulation predict preschool self-regulation? 3) Does preschool self-regulation predict concurrent preschool cognitive competence? One hundred preschoolers (46 females, 54 males; mean age = 5 years, 11 months) who had participated at 9- and/ or 12-months of age in an object permanence task were recruited to participate in this longitudinal investigation. Each subject completed four scales of the WPPSI-R and two social cognitive tasks. Parents completed questionnaires about their preschoolers' regulatory behaviours (Achenbach's Child Behavior Checklist [1991] and selected items from Eisenberg et ale [1993] and Derryberry & Rothbart [1988]). Separate behavioural coding systems were developed to capture regulatory capabilities in infancy (from the object permanence task) and preschool (from the WPPSIR Block Design). Overall, correlational and multiple regression results offered strong affirmative answers to the three key questions (R's = .30 to .38), using the behavioural observations of self-regulation. Behavioural regulation at preschool substantially predicted parental reports of regulation, but the latter variables did not predict preschool competence. Infant selfregulation and preschool regulation made statistically independent contributions to competence, even though regulation at Time 1 and Time 2 ii were substantially related. The results are interpreted as supporting a developmental pathway in which well-regulated infants more readily acquire both expertise and more sophisticated regulatory skills. Future research should address the origins of these skills earlier in infancy, and the social contexts that generate them and support them during the intervening years.

Towards Evaluating and Modelling the Impacts of Mobile-Based Augmented Reality Applications on Learning and Engagement

Mobile augmented reality applications are increasingly utilized as a medium for enhancing learning and engagement in history education. Although these digital devices facilitate learning through immersive and appealing experiences, their design should be driven by theories of learning and instruction. We provide an overview of an evidence-based approach to optimize the development of mobile augmented reality applications that teaches students about history. Our research aims to evaluate and model the impacts of design parameters towards learning and engagement. The research program is interdisciplinary in that we apply techniques derived from design-based experiments and educational data mining. We outline the methodological and analytical techniques as well as discuss the implications of the anticipated findings.

Towards Evaluating and Modelling the Impacts of Mobile-Based Augmented Reality Applications on Learning and Engagement

Mobile augmented reality applications are increasingly utilized as a medium for enhancing learning and engagement in history education. Although these digital devices facilitate learning through immersive and appealing experiences, their design should be driven by theories of learning and instruction. We provide an overview of an evidence-based approach to optimize the development of mobile augmented reality applications that teaches students about history. Our research aims to evaluate and model the impacts of design parameters towards learning and engagement. The research program is interdisciplinary in that we apply techniques derived from design-based experiments and educational data mining. We outline the methodological and analytical techniques as well as discuss the implications of the anticipated findings.

Sermons In Stones. Argument And Artefact For Sustainability

The focus of the study is on the values, priorities and arguments needed to advance ‘design for sustainability’. The discussion critiques conventions related to innovation and technology and offers a product design approach that emphasises minimal intervention, integrated thinking-and-doing, reinstating the familiar, localization and the particularities of place. These interdependent themes are discussed in terms of their relationship to design for sustainability and are clarified through the conceptualization, design, production and use of a simple functional object that is, essentially, a ‘symbolic sustainable artefact’. Although it is fully functional, its practical usefulness in contemporary society would probably be seen as marginal. Its potential contribution is as a symbol of an alternative direction. It asks us to consider aspects of our humanity that are beyond instrumental approaches. It challenges sustainable initiatives that become so caught up in practical and environmental concerns that they fail to question the underlying values, priorities and social drivers which affect how we act in the world; those behaviours and norms that have created the very problems we are so urgently trying to tackle. The discussion is accompanied by a parallel series of photographs that document the relationship between argument, locale and the creation of the conceptual artefact. These photographs convey some of the qualitative differences between the place of much contemporary artefact acquisition, i.e. the shopping mall, and the particular locale that yielded the artefact created during this study; they are also useful in conveying the potential relationship that exist between place and the aesthetics of functional objects.

Le rôle de la rhétorique dans le projet en design : une exploration du concept d’argumentation de Perelman et Olbrechts-Tyteca

Les projets interdisciplinaires constituent rarement le terrain des études 
sur le processus de conception en design. Les théories générales du design, en tentant de définir ce qui est commun à toutes les disciplines du design, ont davantage étudié les cas typiques que les cas atypiques. Or, nous croyons qu’il existe dans les projets interdisciplinaires une négociation argumentative et une ouverture vers l’autre, propice à l’analyse du processus de conception en design. Pour réaliser l’étude de ce processus, la stratégie empruntée a été la «recherche-projet» qui propose une participation active sur le terrain. 
À l’intérieur de cette stratégie méthodologique, nous avons réalisé l’étude de cas d’un projet hybride, une signalétique identitaire destinée à marquer les écocentres montréalais et orienter leurs usagers. Comme plusieurs autres pratiques du design, la complexité des projets interdisciplinaires demande l’apport de plusieurs acteurs dans le processus. 
Ces personnes conçoivent le projet à travers des représentations visuelles et des échanges verbaux, nous avons choisi de faire porter notre étude principalement sur le second. Pour ce faire, nous avons choisi comme cadre théorique le Traité de l’argumentation de Chaïm Perelman et Lucie Olbrechts-Tyteca en nous intéressant plus spécifiquement aux concepts d’«accord» et d’«auditoire». Parce que le véhicule de l’action en design est la notion de «projet», l’Anthropologie du projet de Jean-Pierre Boutinet sera notre guide à travers cette conduite. L’objet de recherche de ce mémoire sera donc le processus de conception en design qui sera étudié à travers le regard de l’argumentation. L’argumentation s'est révélée la clé du problème que posent les jugements de valeur, commune à toutes les disciplines du design. Qu’est-ce qu’un «bon» projet réalisé? Est-il possible de répondre à cette question, sans tomber dans un cadre argumentatif, sans devoir révéler les arguments qui nous permettent de croire vraisemblable une telle proposition? C’est en mettant en lien la théorie du projet en design et la théorie de l’argumentation que nous avons éclairé la pratique du designer, sa relation à ses collègues et ultimement avec lui-même. L’argumentation s’est avérée un outil permettant la construction de la réalité dans le projet interdisciplinaire.