Analysis and simulation of combustion oscillations in a laboratory spray combustor

The unstable combustion that can occur in combustion chambers is a major problem for aeroengines and ground-based industrial gas turbines. Nowadays, CFD provides a flexible, low cost tool to supplement direct measurement. This paper presents simulations of combustion oscillations in a liquid-fuelled experimental rig at the University of Cambridge. Linear acoustic theory was used to describe the acoustic waves propagating upstream and downstream of the combustion zone and to develop inlet and outlet boundary conditions just upstream and downstream of the combustion region enabling the CFD calculation to be efficiently concentrated on the combustion zone. A combustion oscillation was found to occur with its predicted frequency in good agreement with experimental measurements. More details about the unstable combustion can be obtained from the simulation results. The approach developed here is expected to provide a powerful tool for the design and operation of stable combustion systems. Copyright © 2009 by ASME.

Dynamics of bigeye (Thunnus obesus) and yellowfin (T. albacares) tuna in Hawaii’s pelagic fisheries: analysis of tagging data with a bulk transfer model incorporating size-specific attrition

Tag release and recapture data of bigeye (Thunnus obesus) and yellowfin tuna (T. albacares) from the Hawaii Tuna Tagging Project (HTTP) were analyzed with a bulk transfer model incorporating size-specific attrition to infer population dynamics and transfer rates between various fishery components. For both species, the transfer rate estimates from the offshore handline fishery areas to the longline fishery area were higher than the estimates of transfer from those same areas into the inshore fishery areas. Natural and fishing mortality rates were estimated over three size classes: yellowfin 20–45, 46–55, and ≥56 cm and bigeye 29–55, 56–70, and ≥71 cm. For both species, the estimates of natural mortality were highest in the smallest size class. For bigeye tuna, the estimates decreased with increasing size and for yellowfin tuna there was a slight increase in the largest size class. In the Cross Seamount fishery, the fishing mortality rate of bigeye tuna was similar for all three size classes and represented roughly 12% of the gross attrition rate (includes fishing and natural mortality and emigration rates). For yellowfin tuna, fishing mortality ranged between 7% and 30%, the highest being in the medium size class. For both species, the overall attrition rate from the entire fishery area was nearly the same. However, in the specific case of the Cross Seamount fishery, the attrition rate for yellowfin tuna was roughly twice that for bigeye. This result indicates that bigeye tuna are more resident at the Seamount than yellowfin tuna, and larger bigeye tunas tend to reside longer than smaller individuals. This may result in larger fish being more vulnerable to capture in the Seamount fishery. The relatively low level of exchange between the Sea-mount and the inshore and longline fisheries suggests that the fishing activity at the Seamount need not be of great management concern for either species. However, given that the current exploitation rates are considered moderate (10–30%), and that Seamount aggregations of yellowfin and bigeye tuna are highly vulnerable to low-cost gear types, it is recommended that further increases in fishing effort for these species be monitored at Cross Seamount.

Rice-fish and rice mono-crop production at Gouripur, Mymensingh: an economic analysis

This study examines the relative profitability of rice-fish culture and rice mono-crop production at Gouripur thana of Mymensingh district. The results of the study show that the rice-fish farming was economically more rewarding than the rice mono-crop farming, although both the farming activities were found profitable over cash as well as full costs. In addition to extra earnings from fish, the rice-fish farming produced significantly a higher yield of rice requiring very minimum extra cost for fish. Rice-fish farming also reduced variability in yield of and return from rice.

Economic feasibility of composite fish culture in leased-in village tanks of Kanyakumari district: an invesment analysis

Kanyakumari district belonging to the high rainfall zone has resource advantages for composite fish culture in the leased-in village tanks. There are more than 400 fish farmers operating in leased-in tanks following composite fish culture under the FFDA programme. To estimate the economic feasibility and financial viability of the enterprise, the present study was taken up. 38 fish farmers selected from the district provided the necessary information like capital investment, costs and return and constraints. The data collected were analysed and a farm nearest to the average farm situation was taken as the representative farm. Investment criteria like PayBack Period (PBP), Simple Rate of Returns (SRR), Net Present Value (NPV) and Benefit Cost Ratio (BCR) were estimated taking into account a period of 10 years, the period for which the village tanks are leased-out to fish farmers under the FFDA programme. The analysis indicated the profitability of composite fish culture in village tanks in the district and the results are discussed with recommendations.

Comparative economic analysis of pond fish production in Mymensingh and Jessore Districts, Bangladesh

The study was conducted to determine the cost, return and relative profitability of pond fish production of Mymensingh and Jessore districts. A total of 75 ponds were selected on the basis of purposive random sampling technique from 7 villages under 2 Upazila (Trishal and Gouripur) of Mymensingh districts and 8 villages under 4 Upazila (Monimmpur, Jhikorgacha, Chowgacha and Sadar) of Jessore district. It was found that per hectare per year gross cost of pond fish production in Mymensingh and Jessore were Tk 333457.75 and Tk 54327.74, while gross return were Tk 434131.16 and Tk. 96640.00 and net return were Tk 100673.41 and Tk. 42312.26, respectively. The findings of this study revealed that the pond fish production in Jessore district was more profitable than that of Mymensingh district. Cobb-Douglas production function was applied to realize the specific effect of the factors on pond fish production. Out of six variables included in the function three variables had positive impact on return from pond fish production, in Mymensingh district but five variables had positive impact on return from pond fish production in Jessore district

Numerical analysis of the current and voltage sharing issues for resistive fault current limiter using YBCO coated conductors

YBaCuO-coated conductors offer great potential in terms of performance and cost-saving for superconducting fault current limiter (SFCL). A resistive SFCL based on coated conductors can be made from several tapes connected in parallel or in series. Ideally, the current and voltage are shared uniformly by the tapes when quench occurs. However, due to the non-uniformity of property of the tapes and the relative positions of the tapes, the currents and the voltages of the tapes are different. In this paper, a numerical model is developed to investigate the current and voltage sharing problem for the resistive SFCL. This model is able to simulate the dynamic response of YBCO tapes in normal and quench conditions. Firstly, four tapes with different Jc 's and n values in E-J power law are connected in parallel to carry the fault current. The model demonstrates how the currents are distributed among the four tapes. These four tapes are then connected in series to withstand the line voltage. In this case, the model investigates the voltage sharing between the tapes. Several factors that would affect the process of quenches are discussed including the field dependency of Jc, the magnetic coupling between the tapes and the relative positions of the tapes. © 2010 IEEE.

Economic analysis of carp based culture technologies in selected areas of Bangladesh

Six carp based culture technologies such as, carp-pangas, carp polyculture, carp-golda, pangas monoculture, golda monoculture and nursery have been selected to determine the cost and returns of respective technologies in Bangladesh. The sample farmers selected for these technologies were 55, 100, 65, 50, 51 and 55 respectively and thus the total sample size stood at 376. The study covered 7 districts of Bangladesh, namely, Mymensingh, Bogra, Noakhali, Comilla, Jessore, Khulna and Bagerhat. Both primary and secondary data were used for this study. It was found that farmers used a good number of feeds for the selected technologies and they maintained no standard doses for them. Remarkable differences were found among the prices of different feeds and other inputs used for different technologies in different locations. Prices of all inputs were found to be increasing and this increase was more in recent years compared to previous years. Though all the technologies were found to be profitable, the feed situation was not satisfactory. Except rice polish all the local feeds showed deficit in supply to meet the national demand for the country. If this situation persists and no proper measures are taken to secure the local feed supply, the present development of supplementary feed-based aquaculture would be fully dependent on imported feeds and would not be sustainable in future. This study strongly suggests the corresponding authority to handle the matter with proper attention considering its significant livelihood impact on the economy of the country.

Effect of low cost feed on the production of walking catfish, Clarias batrachus in farmer's ponds

A feeding trial was conducted for six months in farmer's ponds to assess the performance of BFRI formulated catfish feed on the growth and survival of Clarias batrachus (L.). Nine interested farmers and their ponds (size range: 10-15 dec) in the Barera union of Mymensingh Sadar were selected. The ponds were divided into 3 treatments each with 3 replications. Among the three treatment diets, two diets - traditional (F1) and BFRI formulated (F3) were prepared by using low cost agro-based locally available ingredients and the commercial diets was Saudi-Bangla Grower-1 (F2). The diets were designed as F1, F2 and F3 for traditional (20.40% protein), Commercial (31% protein) and BFRI formulated (30.44% protein) diets respectively. The fingerlings of catfish (7.3 g) were collected from local fish vendors and stocked at the rate of 100/dec. Feeding rates were adjusted by weight after fortnightly sampling of fish. Feeding rate were 10 and 8% of the total body weight respectively for 1st, 2nd month and 5% for the rest of the experimental period. The range of some selected water quality parameters were as follows: dissolved oxygen 4.0 - 7.4 mg/l, temperature 24.0°- 33.9°C, pH 6.8 - 8.00, and transparency 17.0 - 32.00 cm. Which showed suitability of the ponds for rearing fish. At the end of the experiment, significantly highest gain (p<0.05) in weight (1210.96% ±87) and lowest gain in weight (865.25% ±90) were observed in the group of fish fed on diets F3 and F1 respectively. However, no significant differences in growth (p>0.05) was observed in fish fed on commercial diet (F2) and BFRI formulated diet (F3). The FCR value ranged between 2.00 and 2.80 with the traditional diet (F1) showing significantly lower FCR. The total production of fish ranged between 1398.08 and 2145.34 kg/ha with F3 diet resulting in the highest production and net profit. A simple economic analysis showed that fish fed with BFRI formulated (F3) diet resulted in the highest net profit in farmer's pond.

Economic analysis of 22m and 23m deep sea trawlers

The cost-benefit analysis of 23m and 22m trawlers operated from Visakhapatnam base is presented. The study indicated that the deep sea fishing in Indian waters is a profitable venture. The profit over capital investment for a 23m trawler worked out to about 18% whereas the same was about 10% for a 22m trawler. Catch per trawling operation, cost of production, productivity per man year, energy yield etc. establish the economic superiority of 23m vessel.

Thermodynamic analysis of pumped thermal electricity storage

The increasing use of renewable energy technologies for electricity generation, many of which have an unpredictably intermittent nature, will inevitably lead to a greater need for electricity storage. Although there are many existing and emerging storage technologies, most have limitations in terms of geographical constraints, high capital cost or low cycle life, and few are of sufficient scale (in terms of both power and storage capacity) for integration at the transmission and distribution levels. This paper is concerned with a relatively new concept which will be referred to here as Pumped Thermal Electricity Storage (PTES), and which may be able to make a significant contribution towards future storage needs. During charge, PTES makes use of a high temperature-ratio heat pump to convert electrical energy into thermal energy which is stored as ‘sensible heat’ in two thermal reservoirs, one hot and one cold. When required, the thermal energy is then converted back to electricity by effectively running the heat pump backwards as a heat engine. The paper focuses on thermodynamic aspects of PTES, including energy and power density, and the various sources of irreversibility and their impact on round-trip efficiency.

Civil and Environmental Engineering Challenges for Data Sensing and Analysis

The objective of this study was to identify challenges in civil and environmental engineering that can potentially be solved using data sensing and analysis research. The challenges were recognized through extensive literature review in all disciplines of civil and environmental engineering. The literature review included journal articles, reports, expert interviews, and magazine articles. The challenges were ranked by comparing their impact on cost, time, quality, environment and safety. The result of this literature review includes challenges such as improving construction safety and productivity, improving roof safety, reducing building energy consumption, solving traffic congestion, managing groundwater, mapping and monitoring the underground, estimating sea conditions, and solving soil erosion problems. These challenges suggest areas where researchers can apply data sensing and analysis research.

A matrix-calculation-based algorithm for numerical change propagation analysis

Engineering changes (ECs) are raised throughout the lifecycle of engineering products. A single change to one component produces knock-on effects on others necessitating additional changes. This change propagation significantly affects the development time and cost and determines the product's success. Predicting and managing such ECs is, thus, essential to companies. Some prediction tools model change propagation by algorithms, whereof a subgroup is numerical. Current numerical change propagation algorithms either do not account for the exclusion of cyclic propagation paths or are based on exhaustive searching methods. This paper presents a new matrix-calculation-based algorithm which can be applied directly to a numerical product model to analyze change propagation and support change prediction. The algorithm applies matrix multiplications on mutations of a given design structure matrix accounting for the exclusion of self-dependences and cyclic propagation paths and delivers the same results as the exhaustive search-based Trail Counting algorithm. Despite its factorial time complexity, the algorithm proves advantageous because of its straightforward matrix-based calculations which avoid exhaustive searching. Thereby, the algorithm can be implemented in established numerical programs such as Microsoft Excel which promise a wider application of the tools within and across companies along with better familiarity, usability, practicality, security, and robustness. © 1988-2012 IEEE.

Performance analysis and testing of a 250 kW medium-speed brushless doubly-fed induction generator

This study presents the performance analysis and testing of a 250 kW medium-speed brushless doubly-fed induction generator (DFIG), and its associated power electronics and control systems. The experimental tests confirm the design, and showthe system's steady-state and dynamic performance and grid low-voltage ride- through capability. The medium-speed brushless DFIG in combination with a simplified two-stage gearbox promises a low-cost low-maintenance and reliable drivetrain for wind turbine applications. © The Institution of Engineering and Technology 2013.

Computational analysis of liquid crystalline elastomer membranes: Changing Gaussian curvature without stretch energy

Liquid crystalline elastomers (LCEs) can undergo extremely large reversible shape changes when exposed to external stimuli, such as mechanical deformations, heating or illumination. The deformation of LCEs result from a combination of directional reorientation of the nematic director and entropic elasticity. In this paper, we study the energetics of initially flat, thin LCE membranes by stress driven reorientation of the nematic director. The energy functional used in the variational formulation includes contributions depending on the deformation gradient and the second gradient of the deformation. The deformation gradient models the in-plane stretching of the membrane. The second gradient regularises the non-convex membrane energy functional so that infinitely fine in-plane microstructures and infinitely fine out-of-plane membrane wrinkling are penalised. For a specific example, our computational results show that a non-developable surface can be generated from an initially flat sheet at cost of only energy terms resulting from the second gradients. That is, Gaussian curvature can be generated in LCE membranes without the cost of stretch energy in contrast to conventional materials. © 2013 Elsevier Ltd. All rights reserved.

Design and performance analysis of a 6 MW medium-speed Brushless DFIG

The paper presents the design and performance analysis of a 6 MW medium-speed Brushless Doubly-Fed Induction Generation (Brushless DFIG) for a wind turbine drivetrain. Two machines with different frame sizes have been designed to show the flexibility of the design procedure. The mediumspeed Brushless DFIG in combination with a two stage gearbox offers a low-cost, low-maintenance and reliable drivetrain for wind turbine applications.