Grain size and heavy minerals of the Late Quaternary eolian sediments from the Imbituba-Jaguaruna coast, Southern Brazil: Depositional controls linked to relative sea-level changes

The stratigraphic subdivision and correlation of dune deposits is difficult, especially when age datings are not available. A better understanding of the controls on texture and composition of eolian sands is necessary to interpret ancient eolian sediments. The Imbituba-Jaguaruna coastal zone (Southern Brazil, 28 degrees-29 degrees S) stands out due to its four well-preserved Late Pleistocene (eolian generation 1) to Holocene eolian units (eolian generations 2, 3, and 4). In this study, we evaluate the grain-size and heavy-mineral characteristics of the Imbituba-Jaguartma eolian units through statistical analysis of hundreds of sediment samples. Grain-size parameters and heavy-mineral content allow us to distinguish the Pleistocene from the Holocene units. The grain size displays a pattern of fining and better sorting from generation 1 (older) to 4 (younger), whereas the content of mechanically stable (dense and hard) heavy minerals decreases from eolian generation 1 to 4. The variation in grain size and heavy-mineral content records shifts in the origin and balance (input versus output) of eolian sediment supply attributable mainly to relative sea-level changes. Dunefields submitted to relative sea-level lowstand conditions (eolian generation 1) are characterized by lower accumulation rates and intense post-depositional dissection by fluvial incision. Low accumulation rates favor deflation in the eolian system, which promotes concentration of denser and stable heavy minerals (increase of ZTR index) as well as coarsening of eolian sands. Dissection involves the selective removal of finer sediments and less dense heavy minerals to the coastal source area. Under a high rate of relative sea-level rise and transgression (eolian generation 2), coastal erosion prevents deflation through high input of sediments to the coastal eolian source. This condition favors dunefield growth. Coastal erosion feeds sand from local sources to the eolian system. including sands from previous dunefields (eolian generation 1) and from drowned incised valleys. Therefore, dunefields corresponding to transgressive phases inherit the grain-size and heavy-mineral characteristics of previous dunefields, leading to selective enrichment of finer sands and lighter minerals. Eolian generations 3 and 4 developed during a regressive-progradational phase (Holocene relative sea level highstand). The high rate of sediment supply during the highstand phase prevents deflation. The lack of coastal erosion favors sediment supply from distal sources (fluvial sediments rich in unstable heavy minerals). Thus, dunefields of transgressive and highstand systems tracts may be distinguished from dunefields of the lowstand systems tract through high rates of accumulation (low deflation) in the former. The sediment source of the transgressive dunefields (high input of previously deposited coastal sands) differs from that of the highstand dunefields (high input of fluvial distal sands). Based on this case study, we propose a general framework for the relation between relative sea level, sediment supply and the texture and mineralogy of eolian sediments deposited in siliciclastic wet coastal zones similar to the Imbituba-Jaguaruna coast (C) 2009 Elsevier B.V. All rights reserved.

Characterization of the products of aniline peroxydisulfate oligo/polymerization in media with different pH by resonance Raman spectroscopy at 413.1 and 1064 nm excitation wavelengths

The pH-structure correlation of the products of aniline peroxydisulfate reaction was mainly investigated by resonance Raman spectroscopy. The reactions of aniline and ammonium peroxydisulfate were carried out in aqueous solutions of initial pH ranging from 4.9 to 13.2 and monomer/oxidant molar ratio of 4/1. For an initial pH of 4.9, the spectroscopic techniques showed that the emeraldine salt form of polyaniline (PANI-ES) is the main product, corroborating that the usual head-to-tail coupling mechanism is taking place. The resonance Raman spectra at 1064 nm exciting wavelength were useful to detect the emeraldine salt as a minor product for reactions at an initial pH of 5.3-11.5. The Raman spectra of the main product of the reaction at initial pH of 13.2 excited at 1064 and 413.1 nm showed new spectral features consistent with 1,4-Michael-type adducts of aniline monomers and 1,4-benzoquinone-monoimine unit. These compounds and their products of hydrolysis/oxidation are the predominant species for the reaction media of initial pH from 5.3 to 13.2. In order to get PANI with different nanoscale morphologies, a pH value of more than 0 or 1 was used in the aniline polymerization. The spectroscopic data obtained in this work reveal that head-to-tail coupling does not occur when aniline reacts at media pH higher than about 5. It is suggested that chemical structures of the products of aniline oxidation by an unusual mechanism are the driving force for the development of assorted morphologies. Copyright (C) 2011 John Wiley & Sons, Ltd.

Calculating Flash Point Numbers from Molecular Structure: An Improved Method for Predicting the Flash Points of Acyclic Alkanes

We report a novel method for calculating flash points of acyclic alkanes from flash point numbers, N(FP), which can be calculated from experimental or calculated boiling point numbers (Y(BP)) with the equation N(FP) = 1.020Y(BP) - 1.083 Flash points (FP) are then determined from the relationship FP(K) = 23.369N(FP)(2/3) + 20.010N(FP)(1/3) + 31.901 For it data set of 102 linear and branched alkanes, the correlation of literature and predicted flash points has R(2) = 0.985 and an average absolute deviation of 3.38 K. N(FP) values can also be estimated directly from molecular structure to produce an even closer correspondence of literature and predicted FP values. Furthermore, N(FP) values provide a new method to evaluate the reliability of literature flash point data.

Shielding of ionic interactions by sulfur dioxide in an ionic liquid

The effect of adding SO(2) on the structure and dynamics of 1-butyl-3-methylimidazolium bromide (BMIBr) was investigated by low-frequency Raman spectroscopy and molecular dynamics (MD) simulations. The MD simulations indicate that the long-range structure of neat BMIBr is disrupted resulting in a liquid with relatively low viscosity and high conductivity, but strong correlation of ionic motion persists in the BMIBr-SO(2) mixture due to ionic pairing. Raman spectra within the 5 < omega < 200 cm(-1) range at low temperature reveal the short-time dynamics, which is consistent with the vibrational density of states calculated by MD simulations. Several time correlation functions calculated by MD simulations give further insights on the structural relaxation of BMIBr-SO(2).

Design and validation of a sheet metal shearing experimental procedure

Throughout the industrial processes of sheet metal manufacturing and refining, shear cutting is widely used for its speed and cost advantages over competing cutting methods. Industrial shears may include some force measurement possibilities, but the force is most likely influenced by friction losses between shear tool and the point of measurement, and are in general not showing the actual force applied to the sheet. Well defined shears and accurate measurements of force and shear tool position are important for understanding the influence of shear parameters. Accurate experimental data are also necessary for calibration of numerical shear models. Here, a dedicated laboratory set-up with well defined geometry and movement in the shear, and high measurability in terms of force and geometry is designed, built and verified. Parameters important to the shear process are studied with perturbation analysis techniques and requirements on input parameter accuracy are formulated to meet experimental output demands. Input parameters in shearing are mostly geometric parameters, but also material properties and contact conditions. Based on the accuracy requirements, a symmetric experiment with internal balancing of forces is constructed to avoid guides and corresponding friction losses. Finally, the experimental procedure is validated through shearing of a medium grade steel. With the obtained experimental set-up performance, force changes as result of changes in studied input parameters are distinguishable down to a level of 1%.

Internal validity of the Swedish Maternal Health Care Register

Background: The Swedish Maternal Health Care Register (MHCR) is a national quality register that has been collecting pregnancy, delivery, and postpartum data since 1999. A substantial revision of the MHCR resulted in a Web-based version of the register in 2010. Although MHCR provides data for health care services and research, the validity of the MHCR data has not been evaluated. This study investigated degree of coverage and internal validity of specific variables in the MHCR and identified possible systematic errors. Methods: This cross-sectional observational study compared pregnancy and delivery data in medical records with corresponding data in the MHCR. The medical record was considered the gold standard. The medical records from nine Swedish hospitals were selected for data extraction. This study compared data from 878 women registered in both medical records and in the MHCR. To evaluate the quality of the initial data extraction, a second data extraction of 150 medical records was performed. Statistical analyses were performed for degree of coverage, agreement and correlation of data, and sensitivity and specificity. Results: Degree of coverage of specified variables in the MHCR varied from 90.0% to 100%. Identical information in both medical records and the MHCR ranged from 71.4% to 99.7%. For more than half of the investigated variables, 95% or more of the information was identical. Sensitivity and specificity were analysed for binary variables. Probable systematic errors were identified for two variables. Conclusions: When comparing data from medical records and data registered in the MHCR, most variables in the MHCR demonstrated good to very good degree of coverage, agreement, and internal validity. Hence, data from the MHCR may be regarded as reliable for research as well as for evaluating, planning, and decision-making with respect to Swedish maternal health care services.

Pressure injury: an exploration of the relationship between risk factors and interface pressure

Pressure injuries are a serious risk for patients admitted to hospital and are thought to result from a number of forces operating on skin tissue (pressure, shear and friction). Most research on interface pressure (IP) has taken place using healthy volunteers or mannequins. Little is currently known about the relationship between pressure injury risk and IP for hospital patients. This relationship was investigated with a sample of 121 adult hospital patients. Pressure injury risk was evaluated using the Waterlow Risk Assessment Tool (WRAT) and IP was measured at the sacrum using a Tekscan ClinSeatTM IP sensor mat. Other factors considered were body mass index (BMI), blood pressure, reason for hospital admission, comorbidities and admission route to hospital. Patients were classified according to WRAT categories (‘low risk’, ‘at risk’, ‘high risk’, ‘very high risk’) and then remained still on a standard hospital mattress for 10 minutes while IP was measured. Participants in the ‘low risk’ group were significantly younger than all other groups (p<0.001) and there were some group differences in BMI. IP readings were compared between the ‘low risk’ group and all of the participants at greater risk. The ‘low risk’ group had significantly lower IP at the sacrum on a standard hospital mattress than those at greater risk (p=0.002). Those at greater risk tended to have IP readings at the low end of the compromised IP range. This study is significant because it describes a new, clinically relevant methodology and presents findings that challenge clinician assumptions about the relationships between pressure injury risk assessment and IP.

Hegemony of printed books in Australian tertiary education a concept under challenge

This paper is about challenges to the hegemony of printed books in Australian tertiary education and the potential demise of that hegemony. Not because the book in its traditional form is considered by some to be outdated and not because ofcompeting products that might put the use of the traditional book under threat - our Australian 'book-industry' might well rise to such challenges given that competitiveness is a driving feature of business. This paper is about challenges to the hegemony of printed books in tertiary education because of forces entirely outside the 'book-industry's' control.

The function of traditional printed books within tertiary education is changing. Education is a user-pays product, and competitive pressures ensure students are given greater voice in the types of learning resources provided, with the evolution of electronic and communication technologies allowing student learning resources to be made available in a myriad of ways. Thus a traditional printed book may be an inflexible tool in a dynamic environment.

Preliminary validation of the Chinese version of the pediatric quality of life inventory

The Pediatric Quality of Life Inventory (PedsQL) is a scale for assessing health-related quality of life of children and adolescents aged 2-18 years. Three reports of PedsQL for the age ranges 2-4 years and 5-7 years were translated into Chinese and their validities were examined. A total of 186 children and parents were involved in the study. Content validity, test-retest reliability, internal consistency reliability and construct validity were assessed. The correlation of parents' and children's reports was also examined. The results showed that the internal consistency is generally good, test-retest reliability ranged from moderate to good, differences between disabled and non-disabled individuals are significant in total scores and in all subscales except for the physical functioning subscale for the children's self-report for the age ranges of 2-4 years and 5-7 years and the correlation between the reports of the parents and children for the age range of 5-7 years is moderate to high. This suggests that the newly translated Chinese PedsQL for children aged 2-4 years and 5-7 years seems to be reliable and valid to be used as a measure of health-related quality of life in Chinese pediatric research and clinical applications.

Development and application of polymerase chain reaction-based assays for Rathayibacter Toxicus and a Bacteriophage associated with annual ryegrass (Lolium Rigidum) toxicity

Annual ryegrass toxicity (ARGT) is responsible for significant stock losses in South Australia and Western Australia. The toxicity is caused by corynetoxins produced by the bacterium Rathayibacter toxicus (with the possible involvement of a bacteriophage), which infects annual ryegrass (Lolium rigidum). Polymerase chain reaction (PCR)-based assays, compatible with an existing enzyme-linked immunosorbent assay for the corynetoxins, have been developed and used to screen L. rigidum for both the presence of R. toxicus and for the bacteriophage isolate NCPPB 3778. The results from analysing bacterially infected galls from toxic grain screenings showed a positive correlation between the presence of the bacterium and corynetoxins but not with the bacteriophage. Analysis of pasture-derived samples of annual ryegrass showed about a 50% correlation of corynetoxins with bacterial presence and about a 5% correlation of phage with the presence of the bacterium. These observations support the potential application of the PCR-based assays in providing a useful, complementary tool in the assessment of the likelihood of pasture and feed to cause ARGT and to enable a better understanding of the complex aetiology of ARGT.

New ophiuroids from the Permian/Triassic boundary beds of South China

A new genus of ophiuroid, Huangzhishania, is created based on new material from the Permian/Triassic boundary beds at the Huangzhishan section, South China. The age of the new genus is constrained as earliest Griesbachian by means of faunal correlation of the associated bivalves and stratigraphical correlation with the Mixed Fauna Beds of the neighbouring Meishan section. Taphonomic and palaeoecological evidence suggest that the collapse of the ophiuroid association was related to a catastrophic event, and Huangzhishania was rapidly buried in life position.

Changes in bacterial concentration in the liver correlate with that in the hepaticojejunostomy after bile duct reconstruction: implication in the pathogenesis of postoperative cholangitis

Postoperative cholangitis is a frequent and unpredictable complication of unknown etiology following bile duct reconstruction (BDR), particularly for biliary atresia. This study was undertaken to correlate the growth of bacteria in the hepaticojejunostomy with that in the liver after BDR. Quantitative bacterial culture was done on the specimens taken from the liver and from the hepaticojejunostomy at 1 week (group 1, n = 7), 1 month (group 2, n = 7), and 2 months (group 3, n = 7) following BDR with Roux-en-Y hepaticojejunostomy in piglets after 2 weeks of common bile duct ligation. The histological examination of the liver and the hepaticojejunostomy, as well as serial monitoring of hemogram and liver function tests, were performed to correlate the findings with the bacterial concentration of the liver and the hepaticojejunostomy following BDR. The bacterial concentration of the hepaticojejunostomy, expressed as log10 colony-forming units per gram (log10 CFU/g) of the hepaticojejunostomy, showed a progressive decrease from 8.38 ± 1.36 in group 1, 7.07 ± 2.54 in group 2, to 3.56 ± 1.31 in group 3 (p = 0.001). The log10 CFU/g of the liver also showed a progressive decrease from 5.02 ± 1.59 in group 1, 3.16 ± 1.56 in group 2, to 2.19 ± 1.09 in group 3 (p = 0.006). There was a significant positive correlation of the log10 CFU/g of the liver (n = 21) with that of the hepaticojejunostomy (n = 21) following BDR (r = 0.600, p = 0.004). Most of the infectious pathogens isolated from the liver were also isolated from the hepaticojejunostomy. The changes in hemoglobin, bilirubin, albumin, and ammonia significantly correlated with the changes of the bacterial concentration of the liver. The results of the study suggests that hepatic bacterial proliferation after BDR is significantly affected by microbial overgrowth in the bilioenteric anastomosis and is associated with deteriorated liver function and hemogram.

Statistical analysis of finite element modeling in sheet metal forming and springback analysis

This work focuses on development of a method to statistically study forming and springback problems of TRansformation Induced Plasticity (TRIP) through an industrial case study. A Design of Experiments (DOE) approach was used to study the sensitivity of predictions to four user input parameters in implicit and explicit sheet metal forming codes. Numerical results were compared to experimental measurements of parts stamped in an industrial production line. The accuracy of forming strain predictions for TRIP steel were comparable with conventional steel, but the springback predictions of TRIP steel were far less accurate. The statistical importance of selected parameters for forming and springback prediction is also discussed. Changes of up to ±10% in Young's modulus and coefficient of friction were found to be insignificant in improving or deteriorating the statistical correlation of springback accuracies.

Abjection and midwifery : towards a revision of Julia Kristeva's theory of the maternal

This paper will develop a specific reading of Julia Kristeva’s analysis of the Mother in psychoanalytic contexts and artistic production. I want to suggest a particular connection between the Mother and a second figure closely associated with her: the Midwife. Such a move opens up the possibility for a new understanding of Kristeva’s correlation of the Mother with the psychoanalytic concept of “abjection”. I wish to identify the Midwife as the crucial intersection of a masculine and feminine subjectivity. I will undertake this project via a historical study of Midwifery, which will include an exploration of the Midwife’s relationship to masculine ideologies of medical thought, as well as an account of the problematic rise of the “Man-Midwife”. My strategy will be to extend the submerged historical and material content of Kristeva’s own theories, with particular reference to Powers of Horror: An Essay on Abjection.

Physiology and biochemistry of budburst in Vitis vinifera

Both the physiological and biochemical control of budburst in the grapevine, Vitis Vinifera L. were investigated. It was found that the accuracy of a predictive model for grapevine budburst based on ambient temperature was limited under the experimental conditions. There was a significant correlation of 4.7 ± 0.3 days between the days of maximal xylem exudation and budburst over the 3 years of investigation. The co-relationships between daily xylem exudate volume and a range of environmental parameters were considered. It was found that soil temperature was highly correlated against daily xylem exudation. Ambient temperature and soil moisture were significantly correlated with xylem exudation, however the coefficients of correlation were much lower than that of soil temperature. Rainfall showed only a very limited correlation with daily xylem exudate flow. Seasonal variations in the pH and the carbohydrate and inorganic nutrient concentrations of xylem exudate were investigated. Exudate carbohydrate concentrations fell from 660 µM before the day of maximal xylem exudation to zero levels within 4 weeks. Xylem exudate pH was found to consistently fall to a minimum at the time of maximal exudate flow. Exudate concentrations of the metallic cofactors Ca, K, Mg, Mn and Zn varied directly with daily exudate flow, suggesting some sort of flow-dependent mobilisation of these nutrients. A growth promontory oligosaccharide fraction was prepared by partial acid hydrolysis of grapevine primary cell wall material. This fraction significantly increased control growth of the Lemna minor L. bioassay over a limited ‘window’ of bioactivity. A growth inhibitory oligosaccharide fraction, similar in activity to abscisic acid was isolated from grapevine xylem exudate prior to budburst. The exudate concentration or efficacy of this substance declined after budburst such that there was no apparent growth inhibition. A model is proposed for grapevine budburst whereby an oligosaccharide growth inhibitor is gradually removed from the xylematic stream under the effects of soil temperature, allowing the surge of metabolic activity and vegetative growth that constitute budburst.