Modelling risk at low exposure railway level crossings : supporting an argument for low-cost level crossing warning devices with lower levels of safety integrity

This paper describes a risk model for estimating the likelihood of collisions at low-exposure railway level crossings, demonstrating the effect that differences in safety integrity can have on the likelihood of a collision. The model facilitates the comparison of safety benefits between level crossings with passive controls (stop or give-way signs) and level crossings that have been hypothetically upgraded with conventional or low-cost warning devices. The scenario presented illustrates how treatment of a cross-section of level crossings with low cost devices can provide a greater safety benefit compared to treatment with conventional warning devices for the same budget.

Pseudo plastic zone analysis of steel frame structures comprising non-compact sections

Application of `advanced analysis' methods suitable for non-linear analysis and design of steel frame structures permits direct and accurate determination of ultimate system strengths, without resort to simplified elastic methods of analysis and semi-empirical specification equations. However, the application of advanced analysis methods has previously been restricted to steel frames comprising only compact sections that are not influenced by the effects of local buckling. A concentrated plasticity method suitable for practical advanced analysis of steel frame structures comprising non-compact sections is presented in this paper. The pseudo plastic zone method implicitly accounts for the effects of gradual cross-sectional yielding, longitudinal spread of plasticity, initial geometric imperfections, residual stresses, and local buckling. The accuracy and precision of the method for the analysis of steel frames comprising non-compact sections is established by comparison with a comprehensive range of analytical benchmark frame solutions. The pseudo plastic zone method is shown to be more accurate and precise than the conventional individual member design methods based on elastic analysis and specification equations.

Case-control study on risk factors of esophageal cancer

Objective: To explore the influencing factors of esophageal cancer in the trunk basin of Dawen river , Shandong province. Methods: A case- control study was carried out: 195 living cases of diagnosed esophageal cancer and 195 controls were matched by age and sex and surveyed by a unified inventory. Results: T he following items could rises the risk of esophageal cancer : hard dry diet, smoke homemade cigarettes, alcohol consumption> 500 ml/ day, relatives with tumor in history ( OR = 51850, OR = 161 158, OR = 111 513, OR = 11 827, respectively ) . While drinking tea may have protective effect against esophageal cancer ( OR = 01 311). Conclusion: The high incidence of esophageal cancer in the area is relative not only to the environment and dietary factors, but also to the family history of esophageal cancer.

Patients perceptions of emergency department services : better specialised staff, convenient and available services

Many factors are identified as contributing to the high demand for emergency department (ED) care. Similarly, there have been many initiatives taken to minimise the impact that is placed on EDs. Many of these, however, do not consider the patient's opinions and motivations. The aim of this cross-sectional study was to understand patients’ perspectives and reasons behind their decision to present to EDs. 911 surveys were collected from patients presenting to eight QLD EDs in 2011. Based on the Principal Component Analysis technique, a six-item scale entitled "Best services at emergency departments" was extracted (α = 0.729) measuring patients' opinions and perspectives. Further, the independent t-tests were conducted between various groups of ED users. The results suggest that multiple users more likely viewed EDs as the best place for their conditions than the first-time users (Median 10.73 v 11.56, p<0.001). Moreover, patients who made the decision to present by themselves had a more favourable perception of the ED services than those for whom the decision was made or others were involved (Median 11.38 v 10.80, p=0.003). Method of arrival did not affect the respondents’ perception of ED (11.13 v 11.00, p=0.65). The results of this research indicate that patients’ perception of ED as the best and most appropriate place for attention to their medical conditions plays an important role in their decision to present and keep returning to ED. Understanding patients’ reasons and decisions enhances the success of planning and implementing alternative services to manage the demand for ED services.

The increasing cost of healthy food

OBJECTIVE: To assess changes in the cost and availability of a standard basket of healthy food items (the Healthy Food Access Basket [HFAB]) in Queensland. METHODS: Analysis of five cross-sectional surveys (1998, 2000, 2001, 2004 and 2006) describes changes over time. Eighty-nine stores in five remoteness categories were surveyed during May 2006. For the first time a sampling framework based on randomisation of towns throughout the state was applied and the survey was conducted by Queensland Treasury. RESULTS: Compared with the costs in major cities, in 2006 the mean cost of the HFAB was $107.81 (24.2%) higher in very remote stores in Queensland, but $145.57 (32.6%) higher in stores more than 2,000 kilometres from Brisbane. Over six years the cost of the HFAB has increased by around 50% ($148.87) across Queensland and, where data was available, by more than the cost of less healthy alternatives. The Consumer Price Index for food in Brisbane increased by 32.5% over the same period. CONCLUSIONS AND IMPLICATIONS: Australians, no matter where they live, need access to affordable, healthy food. Issues of food security in the face of rising food costs are of concern particularly in the current global economic downturn. There is an urgent need to nationally monitor, but also sustainably address the factors affecting the price of healthy foods, particularly for vulnerable groups who suffer a disproportionate burden of poor health.

Management of endocrine resistant breast cancer

Metastatic breast cancer (MBC) may present de novo but more commonly develops in women initially presenting with early breast cancer despite the widespread use of adjuvant hormonal and cytotoxic chemotherapy. MBC is incurable. Hormone sensitive MBC eventually becomes resistant to endocrine therapy in most women. Anthracyclines are the agents of choice in the treatment of endocrine resistant MBC. With the widespread use of anthracyclines in the adjuvant setting, taxanes have become the agents of choice for many patients. Recently capecitabine has become established as a standard of care for patients pretreated with anthracyclines and taxanes. However, a range of agents have activity as third line treatment. These include gemcitabine, vinorelbine and platinum analogues. The sequential use of non-cross resistant single agents rather than combination therapy is preferable in most women with MBC. Even though combination therapy can improve response rates and increase progression free interval, there is no robust evidence to indicate an advantage in terms of overall survival. Moreover, combination therapy is associated with a higher toxicity rate and poor quality of life. There is no role for dose-intense therapy, high dose therapy or maintenance chemotherapy outside the context of a clinical trial. The introduction of trastuzumab, monoclonal antibody targeting growth factor receptors, has improved the therapeutic options for women with tumours overexpressing HER2/neu. DNA micro-array profiles of tumours can potentially help to individualise therapy in future. Molecular targeted therapy has the potential to revolutionise the management of MBC.

The increasing cost of the basic foods required to promote health in Queensland

Objective: To assess changes in the cost and availability of a standard basket of healthy food items (the Healthy Food Access Basket [HFAB]) in Queensland over time. Design and participants: A series of four cross-sectional surveys (in 1998, 2000, 2001 and 2004) describing the cost and availability of foods in the HFAB over time. In the latest survey, 97 Queensland food stores across the five Australian Bureau of Statistics remoteness categories were compared. Main outcome measures: Cost comparisons for HFAB items by remoteness category for the 97 stores surveyed in 2004; changes in cost and availability of foods in the 81 stores surveyed since 2000; comparisons of food prices in the 56 stores surveyed in 1998, 2000, 2001 and 2004. Results: In 2004, the Queensland mean cost of the HFAB was $395.28 a fortnight. The cost of the HFAB was 29.6%($113.89) higher in “very remote” areas than in “major cities” (P<0.001). Between 2001 and 2004, the Queensland mean cost of the HFAB increased by 14.0% ($48.45), while in very remote areas the cost increased by 18.0% ($76.93) (P<0.001). Since 2000, the annualised per cent increase in cost of the HFAB has been higher than the increase in Consumer Price Index for food in Brisbane. The cost of healthy foods has risen more than the cost of some less nutritious foods, so that the latter are now relatively more affordable. Conclusions: Consumers, particularly those in very remote locations, need to pay substantially more for basic healthy foods than they did a few years ago. Higher prices are likely to be a barrier to good health among people of low socioeconomic status and other vulnerable groups. Interventions to make basic healthy food affordable and accessible to all would help reduce the high burden of chronic disease.

Cross-cultural learning experiences in architectural education

This qualitative study looks at the joint output of 20 architecture students from 2 different countries during their short respective Study Tours to each other’s country to discern the effect of cross-cultural experiences on their learning. This paper uses the students’ joint design efforts and reflective writings to investigate the outcome of this cross-cultural educational exchange. Their joint design efforts resulted in the making of small built structures, drawings and collaborative design proposals for an urban setting. In addition, a short questionnaire and personal interviews were also used as methods to gain insight into their experience and to use as a comparative study. The question is also raised in this paper of whether spontaneous friendship among students is integral to long term learning in a cross-cultural context in comparison to pre-designed learning objectives on the part of the educators. This paper also initiates the dialogue of the extent of cultural influences and universal ideas on collaborative architectural design. With increasing joint design ventures between architectural firms in different countries, there is interest in how collaborative design can be understood in a cross-cultural context. This paper examines short term cross cultural experiences and its contribution to architectural education.

Active awareness : supporting the intentional disclosure of awareness information in collaborative systems

This thesis opens up the design space for awareness research in CSCW and HCI. By challenging the prevalent understanding of roles in awareness processes and exploring different mechanisms for actively engaging users in the awareness process, this thesis provides a better understanding of the complexity of these processes and suggests practical solutions for designing and implementing systems that support active awareness. Mutual awareness, a prominent research topic in the fields of Computer-Supported Cooperative Work (CSCW) and Human-Computer Interaction (HCI) refers to a fundamental aspect of a person’s work: their ability to gain a better understanding of a situation by perceiving and interpreting their co-workers actions. Technologically-mediated awareness, used to support co-workers across distributed settings, distinguishes between the roles of the actor, whose actions are often limited to being the target of an automated data gathering processes, and the receiver, who wants to be made aware of the actors’ actions. This receiver-centric view of awareness, focusing on helping receivers to deal with complex sets of awareness information, stands in stark contrast to our understanding of awareness as social process involving complex interactions between both actors and receivers. It fails to take into account an actors’ intimate understanding of their own activities and the contribution that this subjective understanding could make in providing richer awareness information. In this thesis I challenge the prevalent receiver-centric notion of awareness, and explore the conceptual foundations, design, implementation and evaluation of an alternative active awareness approach by making the following five contributions. Firstly, I identify the limitations of existing awareness research and solicit further evidence to support the notion of active awareness. I analyse ethnographic workplace studies that demonstrate how actors engage in an intricate interplay involving the monitoring of their co-workers progress and displaying aspects of their activities that may be of relevance to others. The examination of a large body of awareness research reveals that while disclosing information is a common practice in face-to-face collaborative settings it has been neglected in implementations of technically mediated awareness. Based on these considerations, I introduce the notion of intentional disclosure to describe the action of users actively and deliberately contributing awareness information. I consider challenges and potential solutions for the design of active awareness. I compare a range of systems, each allowing users to share information about their activities at various levels of detail. I discuss one of the main challenges to active awareness: that disclosing information about activities requires some degree of effort. I discuss various representations of effort in collaborative work. These considerations reveal that there is a trade-off between the richness of awareness information and the effort required to provide this information. I propose a framework for active awareness, aimed to help designers to understand the scope and limitations of different types of intentional disclosure. I draw on the identified richness/effort trade-off to develop two types of intentional disclosure, both of which aim to facilitate the disclosure of information while reducing the effort required to do so. For both of these approaches, direct and indirect disclosure, I delineate how they differ from related approaches and define a set of design criteria that is intended to guide their implementation. I demonstrate how the framework of active awareness can be practically applied by building two proof-of-concept prototypes that implement direct and indirect disclosure respectively. AnyBiff, implementing direct disclosure, allows users to create, share and use shared representations of activities in order to express their current actions and intentions. SphereX, implementing indirect disclosure, represents shared areas of interests or working context, and links sets of activities to these representations. Lastly, I present the results of the qualitative evaluation of the two prototypes and analyse the results with regard to the extent to which they implemented their respective disclosure mechanisms and supported active awareness. Both systems were deployed and tested in real world environments. The results for AnyBiff showed that users developed a wide range of activity representations, some unanticipated, and actively used the system to disclose information. The results further highlighted a number of design considerations relating to the relationship between awareness and communication, and the role of ambiguity. The evaluation of SphereX validated the feasibility of the indirect disclosure approach. However, the study highlighted the challenges of implementing cross-application awareness support and translating the concept to users. The study resulted in design recommendations aimed to improve the implementation of future systems.

Institutional determinants of growth-aspiration entrepreneurship

The thesis is a country-level study on the institutional and human capital determinants of growth-aspiration entrepreneurial activity. By using country-level panel-data analysis, the study is to our knowledge the first to test to what extent country-level human capital accumulation is associated with the prevalence of growth-aspiration entrepreneurship. Overall findings of the study suggest that there are different effects of the institutional determinants on the prevalence of growth-aspiration entrepreneurship in developing countries and developed countries. The study also found that country-level human capital moderates the effects of the institutional environment.

The use of penumbrae to define and analyse non-standard fields

Aim A new method of penumbral analysis is implemented which allows an unambiguous determination of field size and penumbra size and quality for small fields and other non-standard fields. Both source occlusion and lateral electronic disequilibrium will affect the size and shape of cross-axis profile penumbrae; each is examined in detail. Method A new method of penumbral analysis is implemented where the square of the derivative of the cross-axis profile is plotted. The resultant graph displays two peaks in the place of the two penumbrae. This allows a strong visualisation of the quality of a field penumbra, as well as a mathematically consistent method of determining field size (distance between the two peak’s maxima), and penumbra (full-widthtenth-maximum of peak). Cross-axis profiles were simulated in a water phantom at a depth of 5 cm using Monte Carlo modelling, for field sizes between 5 and 30 mm. The field size and penumbra size of each field was calculated using the method above, as well as traditional definitions set out in IEC976. The effect of source occlusion and lateral electronic disequilibrium on the penumbrae was isolated by repeating the simulations removing electron transport and using an electron spot size of 0 mm, respectively. Results All field sizes calculated using the traditional and proposed methods agreed within 0.2 mm. The penumbra size measured using the proposed method was systematically 1.8 mm larger than the traditional method at all field sizes. The size of the source had a larger effect on the size of the penumbra than did lateral electronic disequilibrium, particularly at very small field sizes. Conclusion Traditional methods of calculating field size and penumbra are proved to be mathematically adequate for small fields. However, the field size definition proposed in this study would be more robust amongst other nonstandard fields, such as flattening filter free. Source occlusion plays a bigger role than lateral electronic disequilibrium in small field penumbra size.

Design of cold-formed steel columns at elevated temperatures subject to flexural-torsional buckling

Cold-formed steel members are often subject to axial compression loads in a range of applications. These thin-walled members can be subject to various types of buckling modes, including flexural-torsional buckling. Design standards provide guidelines for columns subject to flexural-torsional buckling modes at ambient temperature. However, there are no specific design guidelines for elevated temperature conditions. Hence extensive research efforts have gone into the many investigations addressing the flexural-torsional buckling behaviour of cold-formed steel columns at elevated temperatures.This research has reviewed the accuracy of the current design rules in AS/NZS 4600 and the North American Specification in determining the member capacities of cold-formed steel columns using the results from detailed finite element analyses and an experimental study of lipped channel columns. It was found that the current ambient temperature Australian and American design rules accurately predicted the member capacities of pin ended lipped channel columns undergoing flexural torsional buckling at elevated temperatures by simply using the appropriate elevated temperature mechanical properties. However, for fixed ended columns with warping fixity undergoing flexural-torsional buckling, it was found that the current design rules significantly underestimated the column capacities as they disregard the beneficial effect of warping fixity. This research has therefore proposed improved design rules and verified their accuracy using finite element analysis and test results of cold-formed lipped channel columns made of three cross-sections and five different steel grades and thicknesses. This paper presents the details of this research study and the results.

Incontinence-associated dermatitis: A cross-sectional prevalence study in the Australian acute care hospital setting

The purpose of this cross-sectional study was to identify the prevalence of incontinence and incontinence-associated dermatitis (IAD) in Australian acute care patients and to describe the products worn to manage incontinence, and those provided at the bedside for perineal skin care. Data on 376 inpatients were collected over 2 days at a major Australian teaching hospital. The mean age of the sample group was 62 years and 52% of the patients were male. The prevalence rate of incontinence was 24% (91/376). Urinary incontinence was significantly more prevalent in females (10%) than males (6%) (χ2  = 4·458, df = 1, P = 0·035). IAD occurred in 10% (38/376) of the sample group, with 42% (38/91) of incontinent patients having IAD. Semi-formed and liquid stool were associated with IAD (χ2  = 5·520, df = 1, P = 0·027). Clinical indication of fungal infection was present in 32% (12/38) of patients with IAD. Absorbent disposable briefs were the most common incontinence aids used (80%, 70/91), with soap/water and disposable washcloths being the clean-up products most commonly available (60%, 55/91) at the bedside. Further data are needed to validate this high prevalence. Studies that address prevention of IAD and the effectiveness of management strategies are also needed.

The effects of exercise and adipose tissue lipolysis on plasma adiponectin concentration and adiponectin receptor expression in human skeletal muscle

Objective It has been suggested that adiponectin regulates plasma free fatty acid (FFA) clearance by stimulating FFA uptake and/or oxidation in muscle. We aimed to determine changes in plasma adiponectin concentration and adiponectin receptor 1 and 2 mRNA expression in skeletal muscle during and after prolonged exercise under normal, fasting conditions (high FFA trial; HFA) and following pharmacological inhibition of adipose tissue lipolysis (low FFA trial; LFA). Furthermore, we aimed to detect and locate adiponectin in skeletal muscle tissue. Methods Ten subjects performed two exercise trials (120 min at 50% VO2max). Indirect calorimetry was used to determine total fat oxidation rate. Plasma samples were collected at rest, during exercise and during post-exercise recovery to determine adiponectin, FFA and glycerol concentrations. Muscle biopsies were taken to determine adiponectin protein and adiponectin receptor 1 and 2 mRNA expression and to localise intramyocellular adiponectin. Results Basal plasma adiponectin concentrations averaged 6.57±0.7 and 6.63±0.8 mg/l in the HFA and LFA trials respectively, and did not change significantly during or after exercise. In the LFA trial, plasma FFA concentrations and total fat oxidation rates were substantially reduced. However, plasma adiponectin and muscle adiponectin receptor 1 and 2 mRNA expression did not differ between trials. Immunohistochemical staining of muscle cross-sections showed the presence of adiponectin in the sarcolemma of individual muscle fibres and within the interfibrillar arterioles. Conclusion Plasma adiponectin concentrations and adiponectin receptor 1 and 2 mRNA expression in muscle are not acutely regulated by changes in adipose tissue lipolysis and/or plasma FFA concentrations. Adiponectin is abundantly expressed in muscle, and, for the first time, it has been shown to be present in/on the sarcolemma of individual muscle fibres.

Preparation of macroporous methacrylate monolithic material with convective flow properties for bioseparation : Investigating the kinetics of pore formation and hydrodynamic performance

The preparation of macroporous methacrylate monolithic material with controlled pore structures can be carried out in an unstirred mould through careful and precise control of the polymerisation kinetics and parameters. Contemporary synthesis conditions of methacrylate monolithic polymers are based on existing polymerisation schemes without an in-depth understanding of the dynamics of pore structure and formation. This leads to poor performance in polymer usage thereby affecting final product recovery and purity, retention time, productivity and process economics. The unique porosity of methacrylate monolithic polymer which propels its usage in many industrial applications can be controlled easily during its preparation. Control of the kinetics of the overall process through changes in reaction time, temperature and overall composition such as cross-linker and initiator contents allow the fine tuning of the macroporous structure and provide an understanding of the mechanism of pore formation within the unstirred mould. The significant effect of temperature of the reaction kinetics serves as an effectual means to control and optimise the pore structure and allows the preparation of polymers with different pore size distributions from the same composition of the polymerisation mixture. Increasing the concentration of the cross-linking monomer affects the composition of the final monoliths and also decreases the average pore size as a result of pre-mature formation of highly cross-linked globules with a reduced propensity to coalesce. The choice and concentration of porogen solvent is also imperative. Different porogens and porogen mixtures present different pore structure output. Example, larger pores are obtained in a poor solvent due to early phase separation.