Shock tube studies of the effects of sharp-rising, long-duration overpressures on biological systems /

Shock tubes have been used successfully by a number of investigators to study the biological effects of variations in environmental pressures (1,2,3). Recently an unusually versatile laboratory pressurization source became available with the capability of consistently reproducing a wide variety of pressure-time phenomena of durations equal to and well beyond those associated with the detonation of nuclear devices (4). Thus it became possible to supplement costly full-scale field research in blast biology carried out at the Nevada Test Site (5,6) by using an economical yet realistic laboratory tool. In one exploratory study employing pressure pulses of 5 to 10 sec duration wherein the times to max overpressure and the magnitudes of the overpressures were varied, a relatively high tolerance of biological media to pressures well over 150 psi was demonstrated (7). In contrast, the present paper will describe the relatively high biological susceptibility to long duration overpressures in which the pressure rises occurred in single and double fast-rising steps.

Development of a standardized vehicle identification number. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Intelligent transportation systems and intermodal freight transportation /

"Sponsoring/monitoring agency report number: DOT-FHWA-JPO-97-008"--Report documentation page.

Investigation of inappropriate pollutant entries into storm drainage systems : a user's guide /

"Contract number 68-C9-0033 and Cooperative Agreement number CR-816862."

Skin friction, heat transfer, and pressure measurements on hypersonic inlet compression surfaces in the Mach number range 7.5 to 16.

Cornell Aeronautical Laboratory, Inc., Buffalo. Report no. AA-1948-Y-3

Mixed-Member Electoral Systems in Constitutional Context : Taiwan, Japan, and Beyond /

After the electoral reform in 1994, Japan saw a gradual evolution from a multi-party system toward a two-party system over the course of five House of Representatives election cycles. In contrast, after Taiwan’s constitutional amendment in 2005, a two-party system emerged in the first post-reform legislative election in 2008. Critically, however, Taiwan’s president is directly elected while Japan’s prime minister is indirectly elected. The contributors conclude that the higher the payoffs of holding the executive office and the greater degree of cross-district coordination required to win it, the stronger the incentives for elites to form and stay in the major parties. In such a context, a country will move rapidly toward a two-party system. In Part II, the contributors apply this theoretical logic to other countries with mixed-member systems to demonstrate its generality. They find the effect of executive competition on legislative electoral rules in countries as disparate as Thailand, the Philippines, New Zealand, Bolivia, and Russia. The findings presented in this book have important implications for political reform. Often, reformers are motivated by high hopes of solving some political problems and enhancing the quality of democracy. But, as this group of scholars demonstrates, electoral reform alone is not a panacea. Whether and to what extent it achieves the advocated goals depends not only on the specification of new electoral rules per se but also on the political context—and especially the constitutional framework—within which such rules are embedded.

Estimating the number of persons with records of arrest in the Illinois labor force /

"April 1982."

Merchant ship automation study; final report. Contract number MA-2228, U.S. Department of Commerce, Maritime Administration, Washington.

v.1.Summary and recommendations.--v.2.Automatic ship control and communications systems.--v.3.Appendices to 262 R 0012.--v.3.Appendices to 262 R 0012.--v.4.automatic control of engineering functions.--v.5.Appendices to 262 R 0014.--v.6.Powerplants and auxiliaries for automated ships.--v.7.Economic aspects of automation.--v.8.Legal implications of automation.

The national evaluation of the Pilot Cities Program : a team approach to improving local criminal justice systems /

Issued November 1975.

Towards Accurate and Efficient Description of Excited States

Thesis (Ph.D.)--University of Washington, 2016-06

Aspects of Markov Chains and Particle Systems

Thesis (Ph.D.)--University of Washington, 2016-06

Configurations in 4-cycle systems

A 4-cycle system of order n, denoted by 4CS(n), exists if and only if nequivalent to1 (mod 8). There are four configurations which can be formed by two 4-cycles in a 4CS(n). Formulas connecting the number of occurrences of each such configuration in a 4CS(n) are given. The number of occurrences of each configuration is determined completely by the number d of occurrences of the configuration D consisting of two 4-cycles sharing a common diagonal. It is shown that for every nequivalent to1 (mod 8) there exists a 4CS(n) which avoids the configuration D, i.e. for which d=0. The exact upper bound for d in a 4CS(n) is also determined.

Geometric distortion in clinical MRI systems - Part I: evaluation using a 3D phantom

Recently, a 3D phantom that can provide a comprehensive and accurate measurement of the geometric distortion in MRI has been developed. Using this phantom, a full assessment of the geometric distortion in a number of clinical MRI systems (GE and Siemens) has been carried out and detailed results are presented in this paper. As expected, the main source of geometric distortion in modern superconducting MRI systems arises from the gradient field nonlinearity. Significantly large distortions with maximum absolute geometric errors ranged between 10 and 25 mm within a volume of 240 x 240 x 240 mm(3) were observed when imaging with the new generation of gradient systems that employs shorter coils. By comparison, the geometric distortion was much less in the older-generation gradient systems. With the vendor's correction method, the geometric distortion measured was significantly reduced but only within the plane in which these 2D correction methods were applied. Distortion along the axis normal to the plane was, as expected, virtually unchanged. Two-dimensional correction methods are a convenient approach and in principle they are the only methods that can be applied to correct geometric distortion in a single slice or in multiple noncontiguous slices. However, these methods only provide an incomplete solution to the problem and their value can be significantly reduced if the distortion along the normal of the correction plane is not small. (C) 2004 Elsevier Inc. All rights reserved.

The prevalence and concentration of Escherichia coli O157 in faeces of cattle from different production systems at slaughter

Aims: To determine the prevalence and concentration of Escherichia coli O157 shed in faeces at slaughter, by beef cattle from different production systems. Methods and Results: Faecal samples were collected from grass-fed (pasture) and lot-fed (feedlot) cattle at slaughter and tested for the presence of E. coli O157 using automated immunomagnetic separation (AIMS). Escherichia coli O157 was enumerated in positive samples using the most probable number (MPN) technique and AIMS and total E. coli were enumerated using Petrifilm. A total of 310 faecal samples were tested (155 from each group). The geometric mean count of total E. coli was 5 x 10(5) and 2.5 x 10(5) CFU g(-1) for lot- and grass-fed cattle, respectively. Escherichia coli O157 was isolated from 13% of faeces with no significant difference between grass-fed (10%) and lot-fed cattle (15%). The numbers of E. coli O157 in cattle faeces varied from undetectable (

On systems thinking, systems biology and the in Silico Plant

The recent summary report of a Department of Energy Workshop on Plant Systems Biology (P.V. Minorsky [2003] Plant Physiol 132: 404-409) offered a welcomed advocacy for systems analysis as essential in understanding plant development, growth, and production. The goal of the Workshop was to consider methods for relating the results of molecular research to real-world challenges in plant production for increased food supplies, alternative energy sources, and environmental improvement. The rather surprising feature of this report, however, was that the Workshop largely overlooked the rich history of plant systems analysis extending over nearly 40 years (Sinclair and Seligman, 1996) that has considered exactly those challenges targeted by the Workshop. Past systems research has explored and incorporated biochemical and physiological knowledge into plant simulation models from a number of perspectives. The research has resulted in considerable understanding and insight about how to simulate plant systems and the relative contribution of various factors in influencing plant production. These past activities have contributed directly to research focused on solving the problems of increasing biomass production and crop yields. These modeling approaches are also now providing an avenue to enhance integration of molecular genetic technologies in plant improvement (Hammer et al., 2002).