Respostas comportamentais de vacas holandesas, com acesso à sombra constante ou limitada

The experiment was carried out at Piracicaba, São Paulo, Brazil, from January to February 1993, with the objective of evaluating the behavior responses of Holstein cows, with constant or limited access to shade. The experimental design used was completely randomized. Twenty four dairy cows were used, at different lactation stages and production levels, kept in two free stall barns, with or without protection against solar radiation in south-east and north-west edge. The behavior parameters studied were: alimentation, rumination, rest time and frequency and water ingestion frequency. The protection of the free stall barn didn't affect the behavior responses. The alimentation, rumination and rest time, daily, were 3.4, 7.0 e 9.0 hours, respectively. The highest alimentation frequencies were before and after milking. The rumination was mainly during nocturnal period; the rest was more frequent during the period with higher solar radiation. The animals stayed more time in the shelter (13.4 vs 2.5 h/day). The highest daily water ingestion frequencies were in the hot time and next milking, mainly.

An evaporative and desiccant cooling system for air conditioning in humid climates

Evaporative cooling operates using water and air as working fluids. It consists in water evaporation, through the passage of an airflow, thus decreasing the air temperature. This system has a great potential to provide thermal comfort in places where air humidity is low, being, however, less efficient where air humidity is high. A way to solve this problem is to use dehumidifiers to pre-conditioning the process air. This paper presents a system that can be used in humid climates coupling desiccant dehumidification equipment to evaporative coolers. The paper shows, initially, the main characteristics of the evaporative cooling and of the adsorption dehumidification systems. Later on the coupled systems, in which occurs a dehumidification by adsorption in a counter flow rotary heat exchanger following the evaporate cooling of the air in evaporative coolers, are analyzed. The thermodynamic equations of state are also presented. Following, this paper analyzes some operation parameters such as: reactivation temperature, R/P relationship (reactivation air flow/ process air flow) and the thermodynamic conditions of the entering air flow. The paper shows the conditions for the best operation point, with regard to thermal comfort conditions and to the energy used in the process. In addition this paper presents an application of the system in different climate characteristics of several tropical and equatorial cities. Copyright © 2005 by ABCM.

Histological investigation of a 10% metronidazole and 2% lidocaine dressing on wound healing in rats.

AIM: Alveolitis is considered a disturbance of the alveolar healing process that is characterized by blood clot disintegration, alveolar wall infection and extreme pain. Several substances have been investigated to improve healing and guarantee postoperative comfort to patients. The aim of this study was to evaluate, microscopically, in rats, the healing process in non-infected tooth sockets, after application of a 10% metronidazole and 2% lidocaine dressing, using lanolin as vehicle and mint as flavoring. METHODS: Forty-five rats (Rattus norvegicus albinus, Wistar) had their right incisor extracted and were randomly assigned to 3 groups (n=15): Group I (control): the sockets were filled with blood clot; Group II: application of adrenaline solution at 1:1 000 with an absorbent paper point during 1 min plus filling of the socket with a 10% metronidazole and 2% lidocaine dressing, with lanolin as vehicle, and mint as flavoring; Group III: filling of the socket with the 10% metronidazole and 2% lidocaine dressing, with lanolin as vehicle and mint as flavoring. After 6, 15 and 28 days postoperatively, 5 animals per group were euthanized with an injectable anesthetic overdose. Histological and statistical analyses were performed. RESULTS: The results showed that the 10% metronidazole and 2% lidocaine dressing with lanolin as vehicle and mint as flavoring yielded similar response as that of the normal repair group and may be used to prevent the onset of alveolitis in those cases in which any predisposing factor is present. CONCLUSIONS: The use of this dressing has shown a good postoperative patient's comfort and does not cause a significant delay in the alveolar healing process.

Applying GIS tools for analysing urban thermal environment

A methodology for analyzing the solar access and its influence on both air temperature and thermal comfort of the urban environment was here developed by applying the potentiality of GIS tools. Urban canyons in a specific area of a Brazilian medium sized city were studied. First, a computational algorithm was applied in order to allow the determination of sky view factors (SVF) and sun-paths in urban canyons. Then, air temperatures in 40 measurement points were collected within the study area. Solar radiation values of these canyons were determined and subsequently stored in a GIS database. The creation of thermal maps for the whole neighbourhood was possible due to a statistical treatment of the data, by promoting the interpolation of values. All data could then be spatially cross-examined. In addition, thermal comfort maps for summer and winter periods were generated. The methodology allowed the identification of thermal tendencies within the neighbourhood, what can be useful in the conception of guidelines for urban planning purposes.

An easy-learning and easy-teaching tool for indoor thermal analysis - ArcTech

ArcTech is a software being developed, applied and improved with the aim of becoming an efficient sensitization tool to support the teaching-learning process of Architecture courses. The application deals initially with the thermal comfort of buildings. The output generated by the software shows if a student is able to produce a pleasant environment, in terms of thermal sensation along a 24-hours period. Although one can find the very same characteristics in fully-developed commercial software, the reason to create ArcTech is related to the flexibility of the system to be adapted by the instructor and also to the need of simple tools for the evaluation of specific topics along the courses. The first part of ArcTech is dedicated to data management and that was developed using the visual programming language Delphi 7 and Firebird as the database management system. The second part contains the parameters that can be changed by the system administrator and those related to project visualization. The interface of the system, in which the student will learn how to implement and to evaluate the project alternatives, was built using Macromedia Flash. The software was applied to undergraduate students revealing its easy-learning and easy-teaching interface.

Estimativa do padrão de preferência térmica de matrizes pesadas (frango de corte)

Female broiler breeder productivity is based on the principles of thermal comfort that are directly related with the microclimate inside the housing. This research had the objective of monitoring the behavior of female broiler breeders, using the technology of radio-frequency, injectable transponders and readers in different existing microclimates inside a small scale distorted housing model. Eight birds with electronic identification were used. Three readers were used, in three different points inside the model: on the floor of the nest, in the passage besides the lateral wall and below the water facility. Dry bulb (DBT), wet bulb (WBT) and black globe (BGT) temperature were measured continuously. The results point out a distinct behavioral pattern of the birds regarding the environment exposition during the experiment. Three probabilistic models of behavior were developed from the recorded data: probabilistic model for the passage use: FP = 1.10 - 0.244 ln(DBT), probabilistic model for the water facility use: FB = 0.398 + 0.00866(DBT), and probabilistic model for the nest use: FN = 2.22 - 0.272 DBT + 0,011 DBT 2 - 0.000144 DBT 3.

Orientation, building height and sky view factor as energy efficiency design parameters

The energy efficiency of buildings should be a goal at the pre-design phase, though the importance of the design variables is often neglected even during the design process. Highlighting the relevance of these design variables, this research studies the relationships of building location variables with the electrical energy consumption of residential units. The following building design parameters are considered: orientation, story height and sky view factor (SVF). The consideration of the SVF as a location variable contributes to the originality of this research. Data of electrical energy consumption and users' profiles were collected and several variables were considered for the development of an Artificial Neural Network model. This model allows the determination of the relative importance of each variable. The results show that the apartments' orientation is the most important design variable for the energy consumption, although the story height and the sky view factor play a fundamental role in that consumption too. We pointed out that building heights above twenty-four meters do not optimize the energy efficiency of the apartments and also that an increasing SVF can influence the energy consumption of an apartment according to their orientation.

Open urban spaces quality: A study in a historical square in Bath - UK

The quality of open urban spaces is very important for urban vitality. Nowadays urban designers have to face the great challenge of designing urban spaces able to respond to people's need for liveable spaces. The success of these spaces depends on various aspects and the microclimatic condition has been recognized as one of the most influential. However, studies on thermal comfort in open space have shown that the user's thermal sensation does not depend only on microclimate parameters but also on other local qualitative aspects. Thus, environmental quality evaluation of successful public spaces can contribute to understand this issue. This paper focuses on a case study regarding Queen Square's environmental quality, a public space of historical importance in Bath-UK. The first stage of the research, a study on local characteristics and people observations, allowed a preliminary evaluation of the space performance, their social aspects, while it characterized and quantified the hourly variation of the space use in different days and seasons. In the second stage, short microclimatic surveys were carried out simultaneously with a perception survey through a questionnaire. The results show the strong vitality of the square and socioenvironmental significance, not only for its location in the urban context, but also for its historical value. The environmental quality of the square contributes to the users' sensation of comfort even in adverse climatic conditions. This research is part of a project that aims to investigate the impact of the environmental stimuli in the use of open spaces and intend to develop design strategies that aim to maximise the use of open spaces in different weather conditions.

Temperatura ambiente e concentrações séricas de cortisol em suínos em crescimento-terminação

Thirty-six castrated males and females Landrace x Large-White pigs (74 to 149 days of age) were randomly allotted to two environmental conditions: high temperature in a climatic chamber (HT; 22.2 to 32.8 °C) and comfort temperature in a conventional shed (CT; 17.6 to 26.6 °C), with night-and-day variations. Blood samples were weekly collected from animals of both HT and CT conditions for determination of serum cortisol levels. Cortisol levels of both sexes were not different, and there was no interaction with environmental temperature. Pigs of HT showed significantly higher average cortisol level (P<0.01) than the CT ones (7.06 and 4.82 mg/dL, respectively). Increasing in serum cortisol was continuous and linear (P<0.05) during the experimental period, suggesting the cortisol as a possible indicator of the heat stress in growing-finishing pigs.

A modified method of immediate occlusal loading using a reinforced framework denture: A case report

The technique presented in this article presents a protocol for treatment that reduces the time required for the fabrication and placement of an implant supported prosthesis. It also offers improved patient comfort at a lower cost when compared to conventional technology.

How to drag with a worn-out mouse? Searching for social justice through collaboration

We consider what a concern for social justice in terms of social inclusion might mean for teacher education, both practising and prospective, with particular reference to the use of information and communication technology (ICT) in mathematics education taking place at a borderland school. Our discussion proceeds through the following steps: (1) We explore what a borderland position might denote to address what social inclusion might mean. (2) We consider the significance of mathematics education and the use of ICT for processes of social inclusion. (3) We briefly refer to the Interlink Network, as many of our observations emerge as reflections on this project. (4) We present different issues that will be of particular importance with respect to teacher education if we want to establish a mathematics education for social inclusion. These issues concern moving away from the comfort zone, establishing networks, identifying new approaches, moving beyond prototypical research, and getting in contact. This brings us to (5) final considerations, where we return to the notion of social justice. © Springer Science+Business Media B.V. 2009.

Evaluation of hardness and colour change of soft liners after accelerated ageing.

INTRODUCTION: Soft liners have been developed to offer comfort to denture wearers. However, this comfort is compromised when there is a change in the properties of the material, causing colour change, solubility, absorption and hardening. These characteristics can compromise the longevity of soft liners. AIM: The aim of this in vitro study was to investigate the effect of ageing on both the hardness and colour change of two soft liners following accelerated ageing. METHODS: Two denture liners, one resin based (Trusoft, Bosworth, Illinois, USA) and one silicone based (Ufi Gel P, Voco GMBH, Cuxhaven, Germany), were tested in this study for both hardness (using the Shore A scale) and colour change (using the CIE L*a*b* colour scale), initially and after 1008 hours (6 weeks) of accelerated ageing. Statistical analysis was performed using the unpaired t-test with the Welch correction. RESULTS: These indicated that both materials increased in hardness and underwent colour change after accelerated ageing. The initial hardness of Trusoft was far lower than that of Ufi Gel P (18.2 Shore A units vs 34.8 Shore A units). However, for Trusoft the changes for both hardness (from 18.2 to 52.1 Shore A units) and colour change (16.85 on the CIE L*a*b* colour scale) were greater than those for Ufi Gel P, for which hardness changed from 34.8 to 36.5 Shore A units and the colour change was 5.19 on the CIE L*a*b* colour scale. CONCLUSIONS: Ufi Gel P underwent less hardness and colour change after accelerated ageing than Trusoft. On the other hand, the use of Trusoft may be preferable in cases where initial softness is a major consideration, such as when relining an immediate denture after implant surgery.

Estrutura térmica identificada por transectos móveis e canal termal do Landsat 7 em cidade tropical

This study aims to examine the thermal structure of the urban climate based on the interpretation of the satellite Landsat 7 (thermal channel) and measures for the area. It identifies how the production of urban climate develops based on an analysis of the structure of space forms and characteristics of land use and constructive materials in the generation of heat islands and their implications in environmental comfort in a tropical climate medium size city at Brazil. To check intra-urban air temperature, measures were carried out in mobile transects in the North-South and East-West routes. Thermal Channel data of Landsat-7, were converted to surface values. The results showed that the pattern of urbanization and characteristics of land use are responsible for the distribution of temperature generating heat islands in downtown and popular densely built neighborhoods. In those cases the highest indexes of social segregation added to higher temperature also provokes elevation in the number of illnesses and morbidity cases, mostly of respiratory diseases.

Análise comparativa do ambiente de aviários de postura com diferentes sistemas de acondicionamento

Poulty house typology and the materials used (mainly for roofing) are the determining factors for an appropriate thermal condition aiming at production. In this context, the main point of this paper was to identify differences in the internal environment of two poultry houses, using monitoring and afterwards using statistics for comparing the environmental variables. The data analyzed did not show evidence of better thermal comfort for the house which was covered with ceramic roofing tile, because this house did not have ridged vents, making the hot air exit from the house difficult by the chimney effect. The ammonia concentration measured inside both houses was within the comfort limit. The temperature and humidity index of the house covered with ceramic roofing tiles was higher than the house which was covered with cement asbestos roofing tile, even though lower temperature on the tiles' surfaces was verified, showing the positive effects of the use of ridge vents at the housing. Based on the results obtained it is recommended for the Bastos, SP region, that poulty houses should be built with the ridge vent and long eaves beyond the roof of ceramic tiles.

A ótica do usuário na avaliação da qualidade do programa de atenção odontológica à gestante

Objective: To evaluate the pregnant women's perception of the FOA-UNESP's Pregnant Women Dental Care Program (Araraquara, SP, Brazil). Method: The sample included 75 pregnant women and used a questionnaire with 16 closed questions, containing variables grouped in the following categories: the didactic-psychological meetings, clinical treatment, professional's profile, clinical facility, fear/confidence in the treatment, and learning. Except for the variables fear/confidence in the treatment and learning, to which 'yes' or 'no' answers were attributed, the remaining variables were attributed answers varying from weak to excellent. The questionnaire pretested in a pilot-study and applied after informed consent was obtained from all pregnant women treated between 2005 and 2006. Results: Most women rated as excellent the information addressed during the didactic-psychological meetings (81.1%), the clinical treatment (90.6%), the professional as to personal appearance, kindness and attention (88.7%, 96.2% and 90.6%, respectively), and the clinical facility as to cleanness, ventilation and comfort (92.5%, 86.8% and 90.6%, respectively). Most of them stated to feel confident (96.2%) and have no fear (86.8%) during the treatment and also affirmed having learned new information in the didactic-psychological meetings of the program (92.5%). Conclusion: The services and actions developed in the program have reached successful outcomes, providing health to the pregnant women and their forthcoming babies.