A IMPORTÂNCIA DAS TICS E DA EDUCAÇÃO COMO PROCESSO COMUNICACIONAL DIALÓGICO NO ENSINO SUPERIOR: Um Estudo da Universidade Estadual de Mato Grosso do Sul

Esta tese teve por objetivo saber como o corpo docente da Universidade Estadual de Mato Grosso do Sul (UEMS) percebe, entende e reage ante a incorporação e utilização das Tecnologias de Informação e Comunicação (TICs) nos cursos de graduação dessa Instituição, considerando os novos processos comunicacionais dialógicos que elas podem proporcionar na sociedade atual. Metodologicamente, a tese é composta por pesquisa bibliográfica, buscando fundamentar as áreas da Educação e Comunicação, assim como a Educomunicação; pesquisa documental para contextualização do lócus da pesquisa e de uma pesquisa exploratória a partir da aplicação de um questionário online a 165 docentes da UEMS, que responderam voluntariamente. Verificou-se que os professores utilizam as TICs cotidianamente nas atividades pessoais e, em menor escala, nos ambientes profissionais. Os desafios estão em se formar melhor esse docente e oferecer capacitação continuada para que utilizem de forma mais eficaz as TICs nas salas de aula. Destaca-se ainda que os avanços em tecnologia e os novos ecossistemas comunicacionais construíram novas e outras realidades, tornando a aprendizagem um fator não linear, exigindo-se revisão nos projetos pedagógicos na educação superior para que estes viabilizem diálogos propositivos entre a comunicação e a educação. A infraestrutura institucional para as TICs é outro entrave apontado, tanto na aquisição como na manutenção desses aparatos tecnológicos pela Universidade. Ao final, propõe-se realizar estudos e pesquisas que possam discutir alterações nos regimes contratuais de trabalho dos docentes, uma vez que, para atuar com as TICs de maneira apropriada, exige-se mais tempo e dedicação do docente.

An effective use of 3-D CAD/CAM withing an overall C.I.M. framework

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Desenvolvimento teórico e experimental de FSS com elementos fractais de Gosper em estruturas de multicamadas

The fractal self-similarity property is studied to develop frequency selective surfaces (FSS) with several rejection bands. Particularly, Gosper fractal curves are used to define the shapes of the FSS elements. Due to the difficulty of making the FSS element details, the analysis is developed for elements with up to three fractal levels. The simulation was carried out using Ansoft Designer software. For results validation, several FSS prototypes with fractal elements were fabricated. In the fabrication process, fractals elements were designed using computer aided design (CAD) tools. The prototypes were measured using a network analyzer (N3250A model, Agilent Technologies). Matlab software was used to generate compare measured and simulated results. The use of fractal elements in the FSS structures showed that the use of high fractal levels can reduce the size of the elements, at the same time as decreases the bandwidth. We also investigated the effect produced by cascading FSS structures. The considered cascaded structures are composed of two FSSs separated by a dielectric layer, which distance is varied to determine the effect produced on the bandwidth of the coupled geometry. Particularly, two FSS structures were coupled through dielectric layers of air and fiberglass. For comparison of results, we designed, fabricated and measured several prototypes of FSS on isolated and coupled structures. Agreement was observed between simulated and measured results. It was also observed that the use of cascaded FSS structures increases the FSSs bandwidths and, in particular cases, the number of resonant frequencies, in the considered frequency range. In future works, we will investigate the effects of using different types of fractal elements, in isolated, multilayer and coupled FSS structures for applications on planar filters, high-gain microstrip antennas and microwave absorbers

Computação em nuvem no governo: caminhos para a formação de uma agenda governamental

This work aims to understand how cloud computing contextualizes the IT government and decision agenda, in the light of the multiple streams model, considering the current status of public IT policies, the dynamics of the agenda setting for the area, the interface between the various institutions, and existing initiatives on the use of cloud computing in government. Therefore, a qualitative study was conducted through interviews with a group of policy makers and the other group consists of IT managers. As analysis technique, this work made use of content analysis and analysis of documents, with some results by word cloud. As regards the main results to overregulation to the area, usually scattered in various agencies of the federal government, which hinders the performance of the managers. Identified a lack of knowledge of standards, government programs, regulations and guidelines. Among these he highlighted a lack of understanding of the TI Maior Program, the lack of effectiveness of the National Broadband Plan in view of the respondents, as well as the influence of Internet Landmark as an element that can jam the advances in the use of computing cloud in the Brazilian government. Also noteworthy is the bureaucratization of the acquisition of goods to IT services, limited, in many cases, technological advances. Regarding the influence of the actors, it was not possible to identify the presence of a political entrepreneur, and it was noticed a lack of political force. Political flow was affected only by changes within the government. Fragmentation was a major factor for the theme of weakening the agenda formation. Information security was questioned by the respondents pointed out that the main limitation coupled with the lack of training of public servants. In terms of benefits, resource economy is highlighted, followed by improving efficiency. Finally, the discussion about cloud computing needs to advance within the public sphere, whereas the international experience is already far advanced, framing cloud computing as a responsible element for the improvement of processes, services and economy of public resources

Desenvolvimento de estruturas integradas de filtros e antenas para aplicações em sistemas de comunicações sem fio

This paper presents a study of the integration of filters and microstrip antennas, yielding devices named as filtennas for applications in wireless communications systems. The design of these structures is given from the observation of filtennas based integration between horn antennas and frequency selective surfaces (FSS), used in the band X. The choice of microstrip line structures for the development of a new configuration filtennas justifies the wide application of these transmission lines, in recent decades, always resulting in the production of circuit structures with planar light-weight, compact size, low cost, easy to construct and particularly easy to integrate with other microwave circuits. In addition, the antenna structure considered for the composition of filtennas consists of a planar monopole microstrip to microstrip filters integrated in the feed line of the antenna. In particular, are considered elliptical monopole microstrip (operating in UWB UWB) microstrip filters and (in structures with associated sections in series and / or coupled). In addition, the monopole microstrip has a proper bandwidth and omnidirectional radiation pattern, such that its integration with microstrip filters results in decreased bandwidth, but with slight changes in the radiation pattern. The methods used in the analysis of monopoles, and filters were filtennas finite elements and moments by using commercial software Ansoft Designer and HFSS Ansoft, respectively. Specifically, we analyze the main characteristics of filtennas, such as radiation pattern, gain and bandwidth. Were designed, constructed and measures, several structures filtennas, for validation of the simulated results. Were also used computational tools (CAD) in the process of building prototypes of planar monopoles, filters and filtennas. The prototypes were constructed on substrates of glass-fiber (FR4). Measurements were performed at the Laboratory for Telecommunications UFRN. Comparisons were made between simulated and measured, and found good agreement in the cases considered

Análise gráfica de elementos do design na interface de aplicativos de notícias baseados em mobilidade: um estudo do aplicativo Brasil 247

The different characteristics and needs of mobile device users, the situations in which these devices are operated and the limitations and characteristics of these devices are all factors which influence usability and ergonomics; two elements highly required for achieving successful interaction between users and devices. This research aims to identify characteristics of interface design for apps in mobile device applications, focussing on design, visual publishing and content editing, and the actual process of creation of these interfaces, with a view to guarantee quality interaction through touch technology, in observance of service limitations, the opportunities offered by the devices and the application requirements. The study will examine the interface of the mobile device application titled “Brasil 247” which provides news broadcasts using the concept of usability and ergonomics mainly in the field of adaptation, searching and browsing informative articles, as well as clarifying the processes and techniques necessary to carry out interaction tests which seek to evaluate the usability of interface.

Uma aplicação do método fuzzy-electre-topsis para seleção de serviços de computação em nuvem

This work presents an application of a hybrid Fuzzy-ELECTRE-TOPSIS multicriteria approach for a Cloud Computing Service selection problem. The research was exploratory, using a case of study based on the actual requirements of professionals in the field of Cloud Computing. The results were obtained by conducting an experiment aligned with a Case of Study using the distinct profile of three decision makers, for that, we used the Fuzzy-TOPSIS and Fuzzy-ELECTRE-TOPSIS methods to obtain the results and compare them. The solution includes the Fuzzy sets theory, in a way it could support inaccurate or subjective information, thus facilitating the interpretation of the decision maker judgment in the decision-making process. The results show that both methods were able to rank the alternatives from the problem as expected, but the Fuzzy-ELECTRE-TOPSIS method was able to attenuate the compensatory character existing in the Fuzzy-TOPSIS method, resulting in a different alternative ranking. The attenuation of the compensatory character stood out in a positive way at ranking the alternatives, because it prioritized more balanced alternatives than the Fuzzy-TOPSIS method, a factor that has been proven as important at the validation of the Case of Study, since for the composition of a mix of services, balanced alternatives form a more consistent mix when working with restrictions.

Avaliação da adaptação marginal de diferentes tipos de restaurações obtidas por CAD/CAM e métodos convencionais

The past few decades have brought many changes to the dental practice and the technology has become ready available. The result of a satisfactory rehabilitation treatment basically depends on the balance between biological and mechanical factors. The marginal adaptation of crowns and prosthetic structures is vital factor for long-term success. The development of CAD / CAM technology in the manufacture of dental prostheses revolutionized dentistry, this technology is capable of generating a virtual model from the direct digital scanning from the mouth, casts or impressions. It allows the planning and design of the structure in a computered software. The virtual projects are obtained with high precision and a significant reduction in clinical and laboratory time. Thus, the present study (Chapters 1, 2 and 3) computed microtomography was used to evaluate, different materials, different CAD/CAM systems, different ways of obtaining virtual model (with direct or indirect scanning), and in addition, also aims to evaluate the influence of cementing agent in the final adaptation of crowns and copings obtained by CAD / CAM. Furthermore, this study (Chapter 4, 5 and 6) also aims to evaluate significant differences in vertical and horizontal misfits in abutment-free frameworks on external hexagon implants (HE) using full castable UCLAs, castable UCLAs with cobalt-chromium pre-machined bases and obtained by CAD / CAM with CoCr or Zirconia by different scanning and milling systems. For this, the scanning electron microscopy and interferometry were used. It was concluded that the CAD / CAM technology is capable to produce restorations, copings and screw-retained implant-supported frameworks in different materials and systems offering satisfactory results of marginal accuracy, with significative reduction in clinical and laboratory time.

La ciudad escrita. Propuesta de un modelo de inventario y difusión colectivo de la gráfica en el espacio público a través de Internet

Esta tesis defiende que los rótulos y otros gráficos específicos de un lugar constituyen un valioso patrimonio cultural, un elemento esencial en la definición y expresión de la identidad de ese lugar y un factor clave en su legibilidad, habitabilidad y disfrute. Con el objetivo de proteger y gestionar mejor ese patrimonio en peligro de extinción, se propone un modelo de plataforma para el inventario, valorización y creación colectivos a través de internet de la gráfica del espacio público. Las tres funciones principales de la plataforma son: Inventario: ser una herramienta para la recogida colectiva de información y documentación sobre los gráficos del espacio público y catalogación más exhaustiva de los mejores signos, considerados como patrimonio cultural. Valorización: facilitar la organización de actividades de difusión, puesta en valor y disfrute de ese patrimonio. Creación: fomentar y difundir las mejores prácticas de diseño de rótulos, fuentes tipográficas y otros proyectos de comunicación visual en el espacio público, inspirados o no en el contenido del inventario. También se proponen otros elementos del sistema de gestión del patrimonio gráfico del que la plataforma formaría parte. El modelo actualizado podría ser aplicado en primer lugar a Madrid y después al estudio de la gráfica en lugares de todo el mundo, para poder recoger, comparar y compartir los datos a través de una plataforma común en internet. La plataforma sería un laboratorio de debate y reflexión que abriría nuevas e interesantes perspectivas en protección y gestión del patrimonio gráfico además de en la investigación, educación y creación relacionadas con la comunicación visual en el espacio público. El modelo de plataforma que se presenta como conclusión de esta tesis, está basado en el estudio de iniciativas de protección, inventario y gestión de patrimonio cultural y de rótulos y otros gráficos en el espacio público, a nivel internacional, europeo y local, así como en los diversos proyectos y el trabajo de campo realizado por la autora entre 2003 y 2015. A partir del primer modelo generado para el proyecto Ciudad escrita, y que se presenta en el capítulo 2, los capítulos 3 y 4 presentan las experiencias diseñadas y coordinadas por la autora entre 2003 y 2015. El primer proyecto fue Written Europe, WE, una investigación colectiva sobre patrimonio gráfico europeo llevada a cabo por escuelas de diseño de Ámsterdam, Madrid, Praga y Riga entre 2003 y 2006, a través de una web participativa. A partir de WE, se desarrollaron otros proyectos como Ciudad escrita (y Madrid ciudad escrita), Cañas tipográficas, Poesía visual urbana/Breda ciudad escrita, Poesía visual urbana/Superfacial, Written Lavapiés, La universidad escrita, Written Madrid, contribución a Rijkstudio: Make your own Masterpiece y Design as Ethno-tourism...

El papel de los carteles de la División de Gráfica y Cine de Parques y Recreo Público en la redefinición colonial del Puerto Rico de mediados del siglo XX

El cartel serigráfico del proyecto de carteles del Taller de Cinema y Gráfica de Parques y Recreo Público se utilizó como medio para educar e insertar a las grandes masas dentro de las reformas coloniales ocurridas como consecuencia de la entrada de Estados Unidos a la Segunda Guerra Mundial y readiestrar a la población puertorriqueña, entonces compuesta por campesinos, para servir como mano de obra barata y dócil al proyecto colonial y a los beneficiarios del proyecto de industrialización de la posguerra. Se ha dicho en innumerables ocasiones que el camino al infierno está repleto de buenas intenciones; este es el relato de un viaje de ida. Los carteles de la División de Cinema y Gráfica de Parques y Recreo Público mantienen desde el origen varios elementos inquietantes de lo que se podría denominar como la política de reconstrucción de una colonia, de un territorio objeto de la sujeción/subyugación por parte de otro país, y presentarlo como un objetivo plausible, de consideración y cumplimiento con los derechos humanos fundamentales...

Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.