938 resultados para Building demand estimation model
Resumo:
Tripping is considered a major cause of fall in older people. Therefore, foot clearance (i.e., height of the foot above ground during swing phase) could be a key factor to better understand the complex relationship between gait and falls. This paper presents a new method to estimate clearance using a foot-worn and wireless inertial sensor system. The method relies on the computation of foot orientation and trajectory from sensors signal data fusion, combined with the temporal detection of toe-off and heel-strike events. Based on a kinematic model that automatically estimates sensor position relative to the foot, heel and toe trajectories are estimated. 2-D and 3-D models are presented with different solving approaches, and validated against an optical motion capture system on 12 healthy adults performing short walking trials at self-selected, slow, and fast speed. Parameters corresponding to local minimum and maximum of heel and toe clearance were extracted and showed accuracy ± precision of 4.1 ± 2.3 cm for maximal heel clearance and 1.3 ± 0.9 cm for minimal toe clearance compared to the reference. The system is lightweight, wireless, easy to wear and to use, and provide a new and useful tool for routine clinical assessment of gait outside a dedicated laboratory.
Resumo:
Information and Communication Technologies provide public administrations new ways to meet their users' needs. At the same time, e-Government practices support the public sector in improving the quality of service provision and of its internal operations. In this paper we discuss the impacts of digitization on the management of administrative procedures. The theoretical framework and the research model that we will use in this study help us tackle the question of how digitization transforms administrative procedures as, for example, in terms of time and roles. The multiplicity of institutions involved in issuing building permits led us to consider this administrative procedure as a very interesting case study. An online survey was first addressed to Swiss civil servants to explore the field, and here we present some of its results. We are currently undertaking an in-depth case study of the building permit procedures in three Swiss Cantons, which we will also present in this paper. We will conclude with a discussion and the future steps of this project.
Resumo:
Silene dioica is a diploid, dioecious, perennial, insect-pollinated herb and part of the deciduous phase of primary succession in Skeppsvik Archipelago, Gulf of Bothnia, Sweden. These islands are composed of material deposited and left underwater by melting ice at the end of the last ice age. A rapid and relatively constant rate of land uplift of 0.9 cm per year continually creates new islands available for colonization by plants. Because the higher deposits appear first, islands differ in age. Because it is possible to estimate the ages of islands and populations of plant species belonging to early stages of succession, the genetic dynamics occurring within an age-structured metapopulation can be investigated in this archipelago. Fifty-two island populations of S. dioica of known ages, sizes, and distances from each other were studied through electrophoretic data. A number of factors increase the degree of genetic differentiation among these island populations relative to an island model at equilibrium. Newly founded populations were more differentiated than those of intermediate age, which suggests that colonization dynamics increase genetic variance among populations. The very old populations, which decrease in size as they approach extinction, were more differentiated than intermediate-aged populations. Isolation by distance occurs in this system. Colonizers are likely to come from more than one source, and the migrant pool model best explains colonization events in the archipelago. Degree of environmental exposure also affects population differentiation.
Resumo:
Commuting consists in the fact that an important fraction of workers in developed countries do not reside close to their workplaces but at long distances from them, so they have to travel to their jobs and then back home daily. Although most workers hold a job in the same municipality where they live or in a neighbouring one, an important fraction of workers face long daily trips to get to their workplace and then back home.Even if we divide Catalonia (Spain) in small aggregations of municipalities, trying to make them as close to local labour markets as possible, we will find out that some of them have a positive commuting balance, attracting many workers from other areas and providing local jobs for almost all their resident workers. On the other side, other zones seem to be mostly residential, so an important fraction of their resident workers hold jobs in different local labour markets. Which variables influence an area¿s role as an attraction pole or a residential zone? In previous papers (Artís et al, 1998a, 2000; Romaní, 1999) we have brought out the main individual variables that influence commuting by analysing a sample of Catalan workers and their commuting decisions. In this paper we perform an analysis of the territorial variables that influence commuting, using data for aggregate commuting flows in Catalonia from the 1991 and 1996 Spanish Population Censuses.These variables influence commuting in two different ways: a zone with a dense, welldeveloped economical structure will have a high density of jobs. Work demand cannot be fulfilled with resident workers, so it spills over local boundaries. On the other side, this economical activity has a series of side-effects like pollution, congestion or high land prices which make these areas less desirable to live in. Workers who can afford it may prefer to live in less populated, less congested zones, where they can find cheaper land, larger homes and a better quality of life. The penalty of this decision is an increased commuting time. Our aim in this paper is to highlight the influence of local economical structure and amenities endowment in the workplace-residence location decision. A place-to-place logit commuting models is estimated for 1991 and 1996 in order to find the economical and amenities variables with higher influence in commuting decisions. From these models, we can outline a first approximation to the evolution of these variables in the 1986-1996 period. Data have been obtained from aggregate flow travel-matrix from the 1986, 1991 and 1996 Spanish Population Censuses
Resumo:
[cat] En aquest treball presentem un model per explicar el procés d’especialització vitícola assolit als municipis de la província de Barcelona, a mitjans del s. XIX,que cerca entendre com va sorgir històricament un avantatge comparatiu fruit d’un procés que esdevindria un dels punts de partida del procés d’industrialització a Catalunya. Els resultats confirmen els papers jugats pel impuls “Boserupià” de la població en un context d’intensificació de l’ús de la terra, i d’un impuls del mercat “Smithià” en un context d’expansió de la demanda per part de les economies atlàntiques. També es posa de manifest la importància de les dotacions agro-ecològiques i les condicions socioinstitucionals relacionades amb la desigualtat d’ingrés. La difusió de la vinya donà com a resultat unes comunitats rurals menys desiguals fins al 1820, tot i que aquesta desigualtat augmentà de nou a partir d'aleshores.
Resumo:
We propose an iterative procedure to minimize the sum of squares function which avoids the nonlinear nature of estimating the first order moving average parameter and provides a closed form of the estimator. The asymptotic properties of the method are discussed and the consistency of the linear least squares estimator is proved for the invertible case. We perform various Monte Carlo experiments in order to compare the sample properties of the linear least squares estimator with its nonlinear counterpart for the conditional and unconditional cases. Some examples are also discussed
Resumo:
Commuting consists in the fact that an important fraction of workers in developed countries do not reside close to their workplaces but at long distances from them, so they have to travel to their jobs and then back home daily. Although most workers hold a job in the same municipality where they live or in a neighbouring one, an important fraction of workers face long daily trips to get to their workplace and then back home.Even if we divide Catalonia (Spain) in small aggregations of municipalities, trying to make them as close to local labour markets as possible, we will find out that some of them have a positive commuting balance, attracting many workers from other areas and providing local jobs for almost all their resident workers. On the other side, other zones seem to be mostly residential, so an important fraction of their resident workers hold jobs in different local labour markets. Which variables influence an area¿s role as an attraction pole or a residential zone? In previous papers (Artís et al, 1998a, 2000; Romaní, 1999) we have brought out the main individual variables that influence commuting by analysing a sample of Catalan workers and their commuting decisions. In this paper we perform an analysis of the territorial variables that influence commuting, using data for aggregate commuting flows in Catalonia from the 1991 and 1996 Spanish Population Censuses.These variables influence commuting in two different ways: a zone with a dense, welldeveloped economical structure will have a high density of jobs. Work demand cannot be fulfilled with resident workers, so it spills over local boundaries. On the other side, this economical activity has a series of side-effects like pollution, congestion or high land prices which make these areas less desirable to live in. Workers who can afford it may prefer to live in less populated, less congested zones, where they can find cheaper land, larger homes and a better quality of life. The penalty of this decision is an increased commuting time. Our aim in this paper is to highlight the influence of local economical structure and amenities endowment in the workplace-residence location decision. A place-to-place logit commuting models is estimated for 1991 and 1996 in order to find the economical and amenities variables with higher influence in commuting decisions. From these models, we can outline a first approximation to the evolution of these variables in the 1986-1996 period. Data have been obtained from aggregate flow travel-matrix from the 1986, 1991 and 1996 Spanish Population Censuses
Resumo:
An accurate mass formula at finite temperature has been used to obtain a more precise estimation of temperature effects on fission barriers calculated within the liquid drop model.
Resumo:
We present a Bayesian approach for estimating the relative frequencies of multi-single nucleotide polymorphism (SNP) haplotypes in populations of the malaria parasite Plasmodium falciparum by using microarray SNP data from human blood samples. Each sample comes from a malaria patient and contains one or several parasite clones that may genetically differ. Samples containing multiple parasite clones with different genetic markers pose a special challenge. The situation is comparable with a polyploid organism. The data from each blood sample indicates whether the parasites in the blood carry a mutant or a wildtype allele at various selected genomic positions. If both mutant and wildtype alleles are detected at a given position in a multiply infected sample, the data indicates the presence of both alleles, but the ratio is unknown. Thus, the data only partially reveals which specific combinations of genetic markers (i.e. haplotypes across the examined SNPs) occur in distinct parasite clones. In addition, SNP data may contain errors at non-negligible rates. We use a multinomial mixture model with partially missing observations to represent this data and a Markov chain Monte Carlo method to estimate the haplotype frequencies in a population. Our approach addresses both challenges, multiple infections and data errors.
Resumo:
A systematic assessment of global neural network connectivity through direct electrophysiological assays has remained technically infeasible, even in simpler systems like dissociated neuronal cultures. We introduce an improved algorithmic approach based on Transfer Entropy to reconstruct structural connectivity from network activity monitored through calcium imaging. We focus in this study on the inference of excitatory synaptic links. Based on information theory, our method requires no prior assumptions on the statistics of neuronal firing and neuronal connections. The performance of our algorithm is benchmarked on surrogate time series of calcium fluorescence generated by the simulated dynamics of a network with known ground-truth topology. We find that the functional network topology revealed by Transfer Entropy depends qualitatively on the time-dependent dynamic state of the network (bursting or non-bursting). Thus by conditioning with respect to the global mean activity, we improve the performance of our method. This allows us to focus the analysis to specific dynamical regimes of the network in which the inferred functional connectivity is shaped by monosynaptic excitatory connections, rather than by collective synchrony. Our method can discriminate between actual causal influences between neurons and spurious non-causal correlations due to light scattering artifacts, which inherently affect the quality of fluorescence imaging. Compared to other reconstruction strategies such as cross-correlation or Granger Causality methods, our method based on improved Transfer Entropy is remarkably more accurate. In particular, it provides a good estimation of the excitatory network clustering coefficient, allowing for discrimination between weakly and strongly clustered topologies. Finally, we demonstrate the applicability of our method to analyses of real recordings of in vitro disinhibited cortical cultures where we suggest that excitatory connections are characterized by an elevated level of clustering compared to a random graph (although not extreme) and can be markedly non-local.
Resumo:
Microstructure imaging from diffusion magnetic resonance (MR) data represents an invaluable tool to study non-invasively the morphology of tissues and to provide a biological insight into their microstructural organization. In recent years, a variety of biophysical models have been proposed to associate particular patterns observed in the measured signal with specific microstructural properties of the neuronal tissue, such as axon diameter and fiber density. Despite very appealing results showing that the estimated microstructure indices agree very well with histological examinations, existing techniques require computationally very expensive non-linear procedures to fit the models to the data which, in practice, demand the use of powerful computer clusters for large-scale applications. In this work, we present a general framework for Accelerated Microstructure Imaging via Convex Optimization (AMICO) and show how to re-formulate this class of techniques as convenient linear systems which, then, can be efficiently solved using very fast algorithms. We demonstrate this linearization of the fitting problem for two specific models, i.e. ActiveAx and NODDI, providing a very attractive alternative for parameter estimation in those techniques; however, the AMICO framework is general and flexible enough to work also for the wider space of microstructure imaging methods. Results demonstrate that AMICO represents an effective means to accelerate the fit of existing techniques drastically (up to four orders of magnitude faster) while preserving accuracy and precision in the estimated model parameters (correlation above 0.9). We believe that the availability of such ultrafast algorithms will help to accelerate the spread of microstructure imaging to larger cohorts of patients and to study a wider spectrum of neurological disorders.
Resumo:
The plant-available water capacity of the soil is defined as the water content between field capacity and wilting point, and has wide practical application in planning the land use. In a representative profile of the Cerrado Oxisol, methods for estimating the wilting point were studied and compared, using a WP4-T psychrometer and Richards chamber for undisturbed and disturbed samples. In addition, the field capacity was estimated by the water content at 6, 10, 33 kPa and by the inflection point of the water retention curve, calculated by the van Genuchten and cubic polynomial models. We found that the field capacity moisture determined at the inflection point was higher than by the other methods, and that even at the inflection point the estimates differed, according to the model used. By the WP4-T psychrometer, the water content was significantly lower found the estimate of the permanent wilting point. We concluded that the estimation of the available water holding capacity is markedly influenced by the estimation methods, which has to be taken into consideration because of the practical importance of this parameter.
Resumo:
Abstract This thesis presents three empirical studies in the field of health insurance in Switzerland. First we investigate the link between health insurance coverage and health care expenditures. We use claims data for over 60 000 adult individuals covered by a major Swiss Health Insurance Fund, followed for four years; the data show a strong positive correlation between coverage and expenditures. Two methods are developed and estimated in order to separate selection effects (due to individual choice of coverage) and incentive effects ("ex post moral hazard"). The first method uses the comparison between inpatient and outpatient expenditures to identify both effects and we conclude that both selection and incentive effects are significantly present in our data. The second method is based on a structural model of joint demand of health care and health insurance and makes the most of the change in the marginal cost of health care to identify selection and incentive effects. We conclude that the correlation between insurance coverage and health care expenditures may be decomposed into the two effects: 75% may be attributed to selection, and 25 % to incentive effects. Moreover, we estimate that a decrease in the coinsurance rate from 100% to 10% increases the marginal demand for health care by about 90% and from 100% to 0% by about 150%. Secondly, having shown that selection and incentive effects exist in the Swiss health insurance market, we present the consequence of this result in the context of risk adjustment. We show that if individuals choose their insurance coverage in function of their health status (selection effect), the optimal compensations should be function of the se- lection and incentive effects. Therefore, a risk adjustment mechanism which ignores these effects, as it is the case presently in Switzerland, will miss his main goal to eliminate incentives for sickness funds to select risks. Using a simplified model, we show that the optimal compensations have to take into account the distribution of risks through the insurance plans in case of self-selection in order to avoid incentives to select risks.Then, we apply our propositions to Swiss data and propose a simple econometric procedure to control for self-selection in the estimation of the risk adjustment formula in order to compute the optimal compensations.
Resumo:
Preface The starting point for this work and eventually the subject of the whole thesis was the question: how to estimate parameters of the affine stochastic volatility jump-diffusion models. These models are very important for contingent claim pricing. Their major advantage, availability T of analytical solutions for characteristic functions, made them the models of choice for many theoretical constructions and practical applications. At the same time, estimation of parameters of stochastic volatility jump-diffusion models is not a straightforward task. The problem is coming from the variance process, which is non-observable. There are several estimation methodologies that deal with estimation problems of latent variables. One appeared to be particularly interesting. It proposes the estimator that in contrast to the other methods requires neither discretization nor simulation of the process: the Continuous Empirical Characteristic function estimator (EGF) based on the unconditional characteristic function. However, the procedure was derived only for the stochastic volatility models without jumps. Thus, it has become the subject of my research. This thesis consists of three parts. Each one is written as independent and self contained article. At the same time, questions that are answered by the second and third parts of this Work arise naturally from the issues investigated and results obtained in the first one. The first chapter is the theoretical foundation of the thesis. It proposes an estimation procedure for the stochastic volatility models with jumps both in the asset price and variance processes. The estimation procedure is based on the joint unconditional characteristic function for the stochastic process. The major analytical result of this part as well as of the whole thesis is the closed form expression for the joint unconditional characteristic function for the stochastic volatility jump-diffusion models. The empirical part of the chapter suggests that besides a stochastic volatility, jumps both in the mean and the volatility equation are relevant for modelling returns of the S&P500 index, which has been chosen as a general representative of the stock asset class. Hence, the next question is: what jump process to use to model returns of the S&P500. The decision about the jump process in the framework of the affine jump- diffusion models boils down to defining the intensity of the compound Poisson process, a constant or some function of state variables, and to choosing the distribution of the jump size. While the jump in the variance process is usually assumed to be exponential, there are at least three distributions of the jump size which are currently used for the asset log-prices: normal, exponential and double exponential. The second part of this thesis shows that normal jumps in the asset log-returns should be used if we are to model S&P500 index by a stochastic volatility jump-diffusion model. This is a surprising result. Exponential distribution has fatter tails and for this reason either exponential or double exponential jump size was expected to provide the best it of the stochastic volatility jump-diffusion models to the data. The idea of testing the efficiency of the Continuous ECF estimator on the simulated data has already appeared when the first estimation results of the first chapter were obtained. In the absence of a benchmark or any ground for comparison it is unreasonable to be sure that our parameter estimates and the true parameters of the models coincide. The conclusion of the second chapter provides one more reason to do that kind of test. Thus, the third part of this thesis concentrates on the estimation of parameters of stochastic volatility jump- diffusion models on the basis of the asset price time-series simulated from various "true" parameter sets. The goal is to show that the Continuous ECF estimator based on the joint unconditional characteristic function is capable of finding the true parameters. And, the third chapter proves that our estimator indeed has the ability to do so. Once it is clear that the Continuous ECF estimator based on the unconditional characteristic function is working, the next question does not wait to appear. The question is whether the computation effort can be reduced without affecting the efficiency of the estimator, or whether the efficiency of the estimator can be improved without dramatically increasing the computational burden. The efficiency of the Continuous ECF estimator depends on the number of dimensions of the joint unconditional characteristic function which is used for its construction. Theoretically, the more dimensions there are, the more efficient is the estimation procedure. In practice, however, this relationship is not so straightforward due to the increasing computational difficulties. The second chapter, for example, in addition to the choice of the jump process, discusses the possibility of using the marginal, i.e. one-dimensional, unconditional characteristic function in the estimation instead of the joint, bi-dimensional, unconditional characteristic function. As result, the preference for one or the other depends on the model to be estimated. Thus, the computational effort can be reduced in some cases without affecting the efficiency of the estimator. The improvement of the estimator s efficiency by increasing its dimensionality faces more difficulties. The third chapter of this thesis, in addition to what was discussed above, compares the performance of the estimators with bi- and three-dimensional unconditional characteristic functions on the simulated data. It shows that the theoretical efficiency of the Continuous ECF estimator based on the three-dimensional unconditional characteristic function is not attainable in practice, at least for the moment, due to the limitations on the computer power and optimization toolboxes available to the general public. Thus, the Continuous ECF estimator based on the joint, bi-dimensional, unconditional characteristic function has all the reasons to exist and to be used for the estimation of parameters of the stochastic volatility jump-diffusion models.
Resumo:
This article investigates the allocation of demand risk within an incomplete contract framework. We consider an incomplete contractual relationship between a public authority and a private provider (i.e. a public-private partnership), in which the latter invests in non-verifiable cost-reducing efforts and the former invests in non-verifiable adaptation efforts to respond to changing consumer demand over time. We show that the party that bears the demand risk has fewer hold-up opportunities and that this leads the other contracting party to make more effort. Thus, in our model, bearing less risk can lead to more effort, which we describe as a new example of âeuro~counter-incentivesâeuro?. We further show that when the benefits of adaptation are important, it is socially preferable to design a contract in which the demand risk remains with the private provider, whereas when the benefits of cost-reducing efforts are important, it is socially preferable to place the demand risk on the public authority. We then apply these results to explain two well-known case studies.