In situ measured cross section geometry of old timber structures and its influence on structural safety

Old timber structures may show significant variation in the cross section geometry along the same element, as a result of both construction methods and deterioration. As consequence, the definition of the geometric parameters in situ may be both time consuming and costly. This work presents the results of inspections carried out in different timber structures. Based on the obtained results, different simplified geometric models are proposed in order to efficiently model the geometry variations found. Probabilistic modelling techniques are also used to define safety parameters of existing timber structures, when subjected to dead and live loads, namely self-weight and wind actions. The parameters of the models have been defined as probabilistic variables, and safety of a selected case study was assessed using the Monte Carlo simulation technique. Assuming a target reliability index, a model was defined for both the residual cross section and the time dependent deterioration evolution. As a consequence, it was possible to compute probabilities of failure and reliability indices, as well as, time evolution deterioration curves for this structure. The results obtained provide a proposal for definition of the cross section geometric parameters of existing timber structures with different levels of decay, using a simplified probabilistic geometry model and considering a remaining capacity factor for the decayed areas. This model can be used for assessing the safety of the structure at present and for predicting future performance.

Information flow analysis using data-dependent logical propositions

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Melhoria do processo produtivo de embalagem numa empresa do ramo automóvel

Este estudo foi desenvolvido no âmbito da Unidade curricular de Dissertação / Projeto / Estágio do Mestrado em Engenharia Mecânica – Ramo de Gestão Industrial do Instituto Superior de Engenharia do Porto, com aplicação em ambiente industrial numa empresa metalomecânica da indústria automóvel. O projeto desenvolveu-se na secção de inspeção e embalagem de produto acabado da empresa IETA S.A., fornecedora de estruturas metálicas, com o objetivo de minimizar as reclamações recebidas por defeitos originados no processo de fabrico. A abordagem a este estudo iniciou-se pelo registo e análise de dados e consequente formulação e implementação de melhorias ao processo de fabrico, com recurso a metodologias e ferramentas Lean. A existência de um problema relacionado com o processo de fabrico em vigor permitiu o conhecimento dos hábitos de trabalho e a apresentação de propostas de melhoria ao layout fabril e ao método de trabalho em vigor na secção. A análise dos problemas existentes possibilitou a identificação de oportunidades de melhoria em outras áreas do processo, revelando-se o poder das ferramentas utilizadas na análise de dados. Este estudo de investigação revelou ser muito enriquecedor e motivador tendo proporcionado a aplicação de conteúdos científicos Lean em ambiente industrial ficando provada a mais-valia da sua implementação. A aplicação das ferramentas e metodologias Lean estudadas permitiram efetuar uma análise cuidada dos dados conduzindo a propostas de melhoria vantajosas e compatíveis com as necessidades da empresa. As propostas apresentadas, apesar de não terem sido todas implementadas, resultaram num impacto positivo no processo de fabrico com uma eliminação expectável de 38% dos defeitos reclamados.

Implementation for spatial data of the shared nearest neighbour with metric data structures

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Reorganização do layout e reajustamento dos recursos humanos de um armazém

O projeto descrito no presente relatório, desenvolvido no contexto do Mestrado em Logística da APNOR, surgiu com vista a colmatar as necessidades identificadas pela empresa acolhedora na área da armazenagem. A empresa identificou como objetivo principal a reorganização do armazém de modo a satisfazer em tempo útil os pedidos efetuados pela unidade de produção. Em simultâneo foi identificada a necessidade de ajustar os recursos humanos do armazém às necessidades do mesmo. Durante o último ano de atividade verificou-se um crescimento exponencial do volume de produção, assim como do número de clientes. O crescimento acelerado dificultou a adaptação das estruturas da empresa à nova realidade, designadamente no que respeita à disposição do armazém, ao fluxo de informação e físico entre o armazém e a produção, assim como um correto dimensionamento do número de colaboradores afetos ao armazém. No início do estágio foi efetuado um acompanhamento próximo dos colaboradores e das atividades desenvolvidas, por forma a encontrar os principais pontos de estrangulamento dentro do armazém e na relação entre o armazém e a produção. Durante o acompanhamento averiguou-se que a principal dificuldade era a capacidade do armazém em albergar a mercadoria remetida pelos clientes, o tempo dispensado nos percursos efetuados no armazém para a preparação das encomendas e o abastecimento da produção em tempo útil.

LATERAL FLOW ASSAY FOR CRYPTOCOCCAL ANTIGEN: AN IMPORTANT ADVANCE TO IMPROVE THE CONTINUUM OF HIV CARE AND REDUCE CRYPTOCOCCAL MENINGITIS-RELATED MORTALITY

SUMMARYAIDS-related cryptococcal meningitis continues to cause a substantial burden of death in low and middle income countries. The diagnostic use for detection of cryptococcal capsular polysaccharide antigen (CrAg) in serum and cerebrospinal fluid by latex agglutination test (CrAg-latex) or enzyme-linked immunoassay (EIA) has been available for over decades. Better diagnostics in asymptomatic and symptomatic phases of cryptococcosis are key components to reduce mortality. Recently, the cryptococcal antigen lateral flow assay (CrAg LFA) was included in the armamentarium for diagnosis. Unlike the other tests, the CrAg LFA is a dipstick immunochromatographic assay, in a format similar to the home pregnancy test, and requires little or no lab infrastructure. This test meets all of the World Health Organization ASSURED criteria (Affordable, Sensitive, Specific, User friendly, Rapid/robust, Equipment-free, and Delivered). CrAg LFA in serum, plasma, whole blood, or cerebrospinal fluid is useful for the diagnosis of disease caused by Cryptococcusspecies. The CrAg LFA has better analytical sensitivity for C. gattii than CrAg-latex or EIA. Prevention of cryptococcal disease is new application of CrAg LFA via screening of blood for subclinical infection in asymptomatic HIV-infected persons with CD4 counts < 100 cells/mL who are not receiving effective antiretroviral therapy. CrAg screening of leftover plasma specimens after CD4 testing can identify persons with asymptomatic infection who urgently require pre-emptive fluconazole, who will otherwise progress to symptomatic infection and/or die.

The electron transfer complex between nitrous oxide reductase and its electron donors

J Biol Inorg Chem (2011) 16:1241–1254 DOI 10.1007/s00775-011-0812-9

Does direct cash flow presentation help in predicting future operating cash flow?

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Weekly tracking of stability of the flow of conversations into the subprocesses of the Last Planner System

21st Annual Conference of the International Group for Lean Construction – IGLC 21 – Fortaleza, Brazil

An application of reliability-based robustness assessment of steel moment resisting frame structures under post-mainshock cascading events

The paper presented herein proposes a reliability-based framework for quantifying the structural robustness considering the occurrence of a major earthquake (mainshock) and subsequent cascading hazard events, such as aftershocks that are triggered by the mainshock. These events can significantly increase the probability of failure of buildings, especially for structures that are damaged during the mainshock. The application of the proposed framework is exemplified through three numerical case studies. The case studies correspond to three SAC steel moment frame buildings of 3-, 9-, and 20- stories, which were designed to pre-Northridge codes and standards. Twodimensional nonlinear finite element models of the buildings are developed using the Open System for Earthquake Engineering Simulation framework (OpenSees), using a finite-length plastic hinge beam model and a bilinear constitutive law with deterioration, and are subjected to multiple mainshock-aftershock seismic sequences. For the three buildings analyzed herein, it is shown that the structural reliability under a single seismic event can be significantly different from that under a sequence of seismic events. The reliability-based robustness indicator used shows that the structural robustness is influenced by the extent by which a structure can distribute damage.

Earth mortars constructive use on Neolithic domestic structures. Some case studies in Alentejo.

HMC08 - 1st Historical Mortars Conference: Characterization, Diagnosis, Conservation, Repair and Compatibility, LNEC, Lisbon, 24-26 September 2008

Flow cytometric quantitation of phagocytosis in heparinized complete blood with latex particles and Candida albicans

We report a rapid method for the flow cytometric quantitation of phagocytosis in heparinized complete peripherial blood (HCPB), using commercially available phycoerythrin-conjugated latex particles of 1µm diameter. The method is faster and shows greater reproducibility than Bjerknes' (1984) standard technique using propidium iodide-stained Candida albicans, conventionally applied to the leukocytic layer of peripherial blood but here modified for HCPB. We also report a modification of Bjerknes' Intracellular Killing Test to allow its application to HCPB.

Robustness of corroded reinforced concrete structures

Dissertação para obtenção do Grau de Doutor em Engenharia Civil

Historic timber roof structures

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Estruturas e Geotecnia

Porous structures for the purification of biopharmaceuticals

This work aimed at the development of a (bio)polymeric monolithic support for biopharmaceuticals purification and/or capture. For that, it was assured that functional groups on its surface were ready to be involved in a plethora of chemical reactions for incorporation of the desired and most suitable ligand. Using cryogelation as preparation method a screening on multiple combinations of materials was performed in order to create a potentially efficient support with the minimal footprint, i.e. a monolithic support with reasonable mechanical properties, highly permeable, biocompatible, ready to use, with gravitational performance and minimal unspecific interactions towards the target molecules, but also biodegradable and produced from renewable materials. For the pre-selection all monoliths were characterized physico-chemically and morphologically; one agarose-based and two chitosan-based monoliths were then subjected to further characterizations before and after their modification with magnetic nanoparticles. These three specimens were finally tested towards adenovirus and the recovery reached 84% for the chitosan-GMA plain monolith prepared at -80°C. Monoliths based on chitosan and PVA were prepared in the presence and absence of magnetic particles, and tested for the isolation of GFP directly from crude cellular extracts. The affinity ligand A4C7 previously selected for GFP purification was synthesized on the monolith. The results indicated that the solid-phase synthesis of the ligand directly onto the monolith might require optimization and that the large pores of the monoliths are unsuitable for the purification of small proteins, such as GFP.