O uso do beta-tricálcio fosfato como substituto ósseo em odontologia

The correction of bone defects is the restoration of lost structures which can be replaced by alloplastic implants or bone grafts. Due to the known disadvantages of removal of autogenous grafts, most researches in dentistry aim to develop alloplastic or non-alloplastic materials able to replace bone without these limitations. Beta-Tricalcium Phosphate (β-TCP) is a synthetic granular bone substitute, biocompatible, osteoconductive, which can be used in the alveolar reconstruction. In this work, we perform a literature review on the β-TCP characteristics and discuss its application in dentistry.

Frontal sinus obliteration with iliac crest bone grafts

This study evaluated postoperative results of 8 cases of frontal sinus fractures treated by frontal sinus obliteration with autogenous bone from the anterior iliac crest.

Implant-supported rehabilitation after treatment of atrophic mandibular fractures: report of two cases

Objective The objective of this article is to present options of rehabilitation with dental implants in two cases of severely atrophic mandibles (<10 mm) after rigid internal fixation of fractures. Patients and method Two patients who sustained fractures in severely atrophic mandibles with less than 10 mm of bone height were treated by open reduction and internal fixation through a transcervical access. Internal fixation was obtained with 2.4-mm locking reconstruction plates. The first patient presented satisfactory bone height at the area between the mental foramens and after 2 years, received flapless guided implants in the anterior mandible and an immediate protocol prosthesis. The second patient received a tent pole iliac crest autogenous graft after 2 years of fracture treatment and immediate implants. After 5 months, a protocol prosthesis was installed in the second patient. Results In both cases, the internal fixation followed AO principles for load-bearing osteosynthesis. Both prosthetic devices were Branemark protocol prosthesis. The mandibular reconstruction plates were not removed. Both patients are rehabilitated without complications and satisfied with esthetic and functional results. Conclusion With the current techniques of internal fixation, grafting, and guided implants, the treatment of atrophic mandible fractures can achieve very good results, which were previously not possible.

Lack of bone healing: an unusual complication following surgically assisted rapid palatal expansion

Bone defects at interdental osteotomy sites are as a complication of surgi-cally assisted rapid palatal expansion (SARPE). The replacement of osseoustissue by fibrous connective tissue impairs the spontaneous closure of adiastema between central incisors, and orthodontic tooth movementthrough the defect area may lead to root resorption. Treatment of such asituation requires an orthodontic-surgical approach. In this report, wedescribe the lack of bone healing at the midline osteotomy site after SARPE,which was treated by autogenous bone grafting as assessed by cone beamcomputed tomography. In addition, we discuss factors related to the aetiol-ogy and treatment of a bone defect after SARPE.

A utilização do enxerto ósseo autógeno para tratamento de lesão de furca grau II

Destruction of bone and periodontal ligament as a result of periodontal disease can lead to anatomical defects in the furcation area. Treatment of these lesions is a major challenge to the clinician. Periodontal instruments have limited access to this area and plaque and calculus removal from root surfaces are extremely difficult. For proper treatment planning a number of factors must be taken into consideration to achieve immediate and long term success. Surgical therapy associated with bone grafts may be a viable option in the treatment of class II furcation defects, aiming to restore lost tissues. The aim of this paper is to report a clinical case where a simplified surgical approach with the use of autogenous graft was used to treat a class II furcation defect Twelve months after the surgery, an increase in clinical attachment level and pocket depth reduction resulted in a complete closure of the furcation lesion.

Avaliação da espessura do osso parietal como região doadora de enxertos ósseos.

Introduction: The study of graft donor sites, whether from the anatomical, physiological or morphological point of view, has become a topic of current interest, due to the increasing number of patients needing facial bone reconstruction for various reasons. Purpose: In view of the need to constantly improve surgical techniques for autogenous bone graft harvesting, still considered the best choice for facial bone reconstruction, this paper describes an anatomical study on dry skulls in order to evaluate the average thickness of the parietal bone. Material and Methods: Measurements of this bone were taken with a goniometer, at four previously defined points, in the region that is often used as a donor site, in 49 dry skulls (98 parietal bones). The results were evaluated using the T test. Results: Thickness was measured at four predetermined points. The mean values (Point A = 4898mm, B = 4517mm, C = 6185mm, D = 4280mm) show that the bone can be even thinner than previously reported in the literature in other studies of the same nature. The largest bone thickness is in the medial and posterior region. Conclusion: A knowledge of these anatomical characteristics is helpful in preventing possible surgical complications, as well as making it safer for the surgeon to remove this graft and providing more information on whether or not to indicate this region as a bone graft donor site.

Complicações Associadas aos Enxertos Ósseos Aposicionais com Osso Autógeno

Introdution: Tooth extraction results in alveolar ridge resorption due to the progressive reabsorption, which frequently is a limitating factor of dental implants treatment, in function of the insufficient bone height for execution, could be indicated the use of grafts for increase of the alveolar edge. However, the success of the bone graft requests the meticulous attendance of the clinical stages. Proposition: The objective of this research was to evaluate the postoperative complications associated to the autogenous bone grafts. Materials and Methods: Through a random retrospective analysis, 90 file records of patients submitted to the surgical procedure of autogenous bone graft in the period of January from 2000 to the March of 2008. A clinical record was elaborated with base in the necessary data for this evaluation. Results: About the file data analysis, 59 female with average of 49,42 years and 31 male with average of 47,90 years. The previous diseases most related were arterial hypertension, stomachache and diabetis. The smokers was noticed in 13,3% of patients. The donor site most used was a mandibular ramus. The postoperative complications in receiving area represented 17,8% of file datas analysed and in the donor site only one patient showed parestesis. Conclusion: Among the total analyzed files it was observed that the postoperative complications associated with the autogenous bone grafts represented 18,9% of the patients submitted to the procedure, more frequently affecting the receiving area, obtaining partial exposure of the bone graft and absence of inserted gingiva on vestibular cortical bone.

A combined approach for the treatment of resorbed fresh sockets allowing immediate implant restoration: a 2-year follow-up

Introduction: The demand for optimal esthetics has increased with the advance of the implant dentistry and with the desire for easier, safer and faster technique allowing predictable outcomes. Thus, the aim of this case report was to describe a combined approach for the treatment of a periodontally compromised tooth by means of atraumatic tooth extraction, immediate flapless implant placement, autogenous block and particulate bone graft followed by connective tissue graft and immediate provisionalization of the crown in the same operatory time. Case Report: A 27-year-old woman underwent the proposed surgical procedures for the treatment of her compromised maxillary right first premolar. The tooth was removed atraumatically with a periotome without incision. A dental implant was inserted 3 mm apical to the cement-enamel junction of the adjacent teeth enabling the ideal tridimensional implant position. An osteotomy was performed in the maxillary tuber for block bone graft harvesting that allowed the reconstruction of the alveolar buccal plate. Thereafter, an autogenous connective tissue graft was placed to increase both the horizontal and vertical dimensions of the alveolar socket reaching the patient functional and esthetic expectations. Conclusion: This treatment protocol was efficient to create a harmonious gingival architecture with sufficient width and thickness, maintaining the stability of the alveolar bone crest yielding excellent aesthetic results after 2-years of follow-up. We suggest that this approach can be considered a viable alternative for the treatment of periodontally compromised tooth in the maxillary esthetic area enhancing patient comfort and satisfaction.

Características clínicas da associação entre o bruxismo do sono e o refluxo gastroesofágico merecem atenção profissional

Introduction: Bruxism has been defined as an oral parafunctional activity that includes clenching and/or grinding the teeth while asleep or awake. In addition to sleep bruxism (SB), various other orofacial movements sporadically occur during sleep. Occasional regurgitation and heartburn due to gastroesophageal reflux (GER) are frequent in the general population. GER refers to the presence of symptoms that are secondary to the reflux of gastric content through the esophagus with or without signs of esophageal mucosal lesions. Dentists are often the first health care professionals to diagnose GER through observation of its oral manifestation. Objective: The aim of the present case reports was to discuss the diagnosis and clinical procedures followed in two patients with SB and GER, thereby contributing to the dissemination of knowledge about these two entities. We therefore recommend dentists to be alert to identifying the first signs of GER that appear in the oral cavity. Conclusion: At this point, we highlight the importance of treating the patient as a whole, in an endeavor to identify other sources of the problems that could contribute as factors aggravating these conditions.

Effect of surface and heat treatments on the biaxial flexural strength and phase transformation of a Y-TZP ceramic

To evaluate the effect of grinding and airborne-particle abrasion on the biaxial flexural strength (BFS) and phase transformation of a Y-TZP ceramic, and examine whether sintering the veneering porcelain renders the previous heat treatment recommended by the manufacturer unnecessary. Materials and Methods: Lava zirconia specimens (N = 108) were obtained with the following dimensions: 14.0 mm diameter × 1.3 mm thickness (n = 36) and 14.0 mm × 1.6 mm (n = 72). The thicker specimens were ground with diamond burs under irrigation and received (heat-treated groups) or not (non-heat-treated groups) a heat treatment (1000°C for 30 min) prior to the four firing cycles applied to simulate the sintering of the veneering porcelain. All specimens were air abraded as follows (n = 12): 1) 30-μm silica-modified Al2O3 particles (Rocatec Soft); 2) 110-μm silica-modified Al2O3 particles (Rocatec Plus); and 3) 120-μm Al2O3 particles, followed by Rocatec Plus. Three specimens of each group were analyzed by x-ray diffraction (XRD) to assess the monoclinic phase content (%). The BFS test was performed in a mechanical testing machine (Instron 8874). Data (MPa) were analyzed by two-way ANOVA (grinding × airborne-particle abrasion and heat treatment × airborne-particle abrasion) and Tukey's post-hoc test (α = 0.05). The strength reliability was analyzed using the Weibull distribution. Results: Grinding significantly decreased the BFS of the non-heat-treated groups (p < 0.01). Within the ground groups, the previous heat treatment did not influence the BFS (p > 0.05). Air abrasion only influenced the BFS of the ground/heat-treated groups (p < 0.01). For the non-heat-treated groups, the grinding did not decrease the Weibull modulus (m), but it did decrease the characteristic strength (σ0). For Rocatec Soft and 120-μm Al2O3 particles + Rocatec Plus, the heat-treated groups presented lower m and higher σ0 than the ground/non-heat-treated groups. The independent variables did not seem to influence phase transformation. Air-abraded surfaces presented higher monoclinic zirconia content than the as-sintered and ground surfaces, which exhibited similar content. Conclusion: Even under irrigation, grinding compromised the Y-TZP ceramic strength. The sintering of the veneering porcelain rendered the previous heat treatment recommended by the manufacturer unnecessary. Airborneparticle abrasion influenced the strength of heat-treated zirconia.

Effect of surface and heat treatments on the biaxial flexural strength and phase transformation of a y-tzp ceramic

To evaluate the effect of grinding and airborne-particle abrasion on the biaxial flexural strength (BFS) and phase transformation of a Y-TZP ceramic, and examine whether sintering the veneering porcelain renders the previous heat treatment recommended by the manufacturer unnecessary. Materials and Methods: Lava zirconia specimens (N = 108) were obtained with the following dimensions: 14.0 mm diameter × 1.3 mm thickness (n = 36) and 14.0 mm × 1.6 mm (n = 72). The thicker specimens were ground with diamond burs under irrigation and received (heat-treated groups) or not (non-heat-treated groups) a heat treatment (1000°C for 30 min) prior to the four firing cycles applied to simulate the sintering of the veneering porcelain. All specimens were air abraded as follows (n = 12): 1) 30-μm silica-modified Al2O3 particles (Rocatec Soft); 2) 110-μm silica-modified Al2O3 particles (Rocatec Plus); and 3) 120-μm Al2O3 particles, followed by Rocatec Plus. Three specimens of each group were analyzed by x-ray diffraction (XRD) to assess the monoclinic phase content (%). The BFS test was performed in a mechanical testing machine (Instron 8874). Data (MPa) were analyzed by two-way ANOVA (grinding × airborne-particle abrasion and heat treatment × airborne-particle abrasion) and Tukey's post-hoc test (α = 0.05). The strength reliability was analyzed using the Weibull distribution. Results: Grinding significantly decreased the BFS of the non-heat-treated groups (p < 0.01). Within the ground groups, the previous heat treatment did not influence the BFS (p > 0.05). Air abrasion only influenced the BFS of the ground/heat-treated groups (p < 0.01). For the non-heat-treated groups, the grinding did not decrease the Weibull modulus (m), but it did decrease the characteristic strength (σ0). For Rocatec Soft and 120-μm Al2O3 particles + Rocatec Plus, the heat-treated groups presented lower m and higher σ0 than the ground/non-heat-treated groups. The independent variables did not seem to influence phase transformation. Air-abraded surfaces presented higher monoclinic zirconia content than the as-sintered and ground surfaces, which exhibited similar content. Conclusion: Even under irrigation, grinding compromised the Y-TZP ceramic strength. The sintering of the veneering porcelain rendered the previous heat treatment recommended by the manufacturer unnecessary. Airborneparticle abrasion influenced the strength of heat-treated zirconia.

Análise comparativa dos métodos MQL, MQL/Água e convencional na retificação cilíndrica do aço ABNT 52100, com rebolo de óxido de alumínio

Pós-graduação em Engenharia Mecânica - FEB

Avaliação das alterações no nível da crista óssea e na estabilidade de implantes em função instalados na região anterior da maxila enxertada com osso autógeno ou rhBMP-2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito de métodos de desgaste com pontas diamantadas e da ressinterização sobre o limite de fadiga flexural de uma zircônia parcialmente estabilizada por ítria

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fixação do enxerto ósseo autógeno em bloco com adesivos a base de cianoacrilato ou parafuso de titânio: estudo histológico em coelhos

Pós-graduação em Odontologia - FOA