951 resultados para Ankle-foot prosthesis
Resumo:
L’analyse des temps de la narration n’est pas chose nouvelle. Souvent, ce sont les narrations orales ‘de tous les jours’ qui ont préoccupé les linguistes (Labov & Waletzky 1967, Bres 1994). Mais qu’en est-il de l’usage des temps dans les narrations écrites telles qu’on les trouve dans la presse sportive? On se fondera ici sur un corpus d’articles du 1er juillet 2002, tirés de la presse francophone (parisienne, régionale, belge et algérienne) et consacrés à la finale de la Coupe du Monde de football (Labeau 2002b). A quels temps a-t-on recours pour narrer ces exploits sportifs ? Le passé simple a-t-il toujours sa place dans ce genre « épique », ou s’est-il vu supplanter par d’autres formes telles le passé composé, le présent ou l’imparfait de narration… ? (Engel 1990) Nous allons nous concentrer sur deux aspects de l’emploi des temps. D’une part, la presse sportive constitue-t-elle un sous-genre distinct ? D’autre part, des différences régionales apparaissent-elles ? Nous tenterons de voir si les approches textuelles se reflètent dans l’emploi des temps des narrations étudiées. Termes clefs Narration - presse sportive – temps - presse régionale – presse francophone - genre
Resumo:
The Foot-and-Mouth Disease (FMD) outbreak of 2001 in the UK was completely unprecedented in its scale and severity, with over four million animals culled and a cost to the Exchequer of over £4 billion. Local authorities were at the front line in dealing with the outbreak, in coordinating the cull of livestock, the disposal of carcasses as well as attempting to deal with its aftermath and, in particular, the impact on the wider rural economy. This article examines the impacts of this crisis on three local authorities, Devon, Herefordshire and Cumbria. It examines how far the crisis acted as a catalyst in developing strategies to deal with a future outbreak as well as new local initiatives to promote regeneration in the areas most adversely affected. It focuses on developments that can be directly attributed to the crisis and shows that FMD had a considerable impact on communications and 'joined-up' activity within local authorities and with local stakeholders. © 2006, LEPU, South Bank University.
Resumo:
The isolation of spirochetes from severe ovine foot disease has been reported recently by our research group. In this study we describe the preliminary classification of this spirochete based on nucleotide sequence analysis of the PCR-amplified 16S rRNA gene. Phylogenetic analysis of this sequence in comparison with other previously reported 16S rRNA gene sequences showed that the spirochete belonged to the treponemal phylotype Treponema vincentii which has been associated with bovine digital dermatitis and human periodontal disease. Further work is required to define the common virulence determinants of these closely related treponemes in the aetiology of these tissue destructive diseases.
Resumo:
The foot and mouth disease (FMD) epidemic of 2001 was a disaster for sections of the agricultural industry, a number of businesses and for the Ministry of Agriculture, Fisheries and Food (MAFF), which met its demise as a government department during the crisis, being replaced by the Department of the Environment, Food and Rural Affairs (DEFRA). There were some 2,030 confirmed cases and over four million animals slaughtered. It caused the postponement of local elections and of a general election. From a public policy perspective it raised questions about contingency planning, the adjustment of policy to take account of change and how to manage a crisis. This article focuses on the background to the crisis and how it was handled.
Resumo:
Skin blood microcirculation and the metabolism activity of tissue were examined on the patients with type 2 diabetes. Laser Doppler flowmetry (LDF) with 1064 nm laser light source and fluorescence spectroscopy (FS) with excitation light of 365 nm and 450 nm have been used to monitor the blood perfusion and the content of coenzymes NADH and FAD. Concluding, the proposed combined LDF and tissue FS approach allows to identify the significant violations in the blood microcirculation and metabolic activity for type 2 diabetes patients.
Resumo:
The diagnosis of prosthetic joint infection and its differentiation from aseptic loosening remains problematic. The definitive laboratory diagnostic test is the recovery of identical infectious agents from multiple intraoperative tissue samples; however, interpretation of positive cultures is often complex as infection is frequently associated with low numbers of commensal microorganisms, in particular the coagulase-negative staphylococci (CNS). In this investigation, the value of serum procalcitonin (PCT), interleukin-6 (IL-6) and soluble intercellular adhesion molecule-1 (sICAM-1) as predictors of infection in revision hip replacement surgery is assessed. Furthermore, the diagnostic value of serum IgG to short-chain exocellular lipoteichoic acid (sce-LTA) is assessed in patients with infection due to CNS. Presurgical levels of conventional serum markers of infection including C-reactive protein (CRP), erythrocyte sedimentation rate (ESR) and white blood cell count (WBC) is also established. Forty-six patients undergoing revision hip surgery were recruited with a presumptive clinical diagnosis of either septic (16 patients) or aseptic loosening (30 patients). The diagnosis was confirmed microbiologically and levels of serum markers were determined. Serum levels of IL-6 and sICAM-1 were significantly raised in patients with septic loosening (P=0.001 and P=0.0002, respectively). Serum IgG to sce-LTA was elevated in three out of four patients with infection due to CNS. In contrast, PCT was not found to be of value in differentiating septic and aseptic loosening. Furthermore, CRP, ESR and WBC were significantly higher (P=0.0001, P=0.0001 and P=0.003, respectively) in patients with septic loosening. Serum levels of IL-6, sICAM-1 and IgG to sce-LTA may provide additional information to facilitate the diagnosis of prosthetic joint infection.
Resumo:
Os trigonum syndrome, a musculoskeletal disorder causing posterior ankle pain, occurs in approximately one in every 13 people. This condition can be challenging for the athletic trainer when evaluating an acute ankle injury. We present a unique case of an os trigonum successfully treated with conservative rehabilitation without a definitive diagnosis.
Resumo:
Mice (30+-3 days old) were exposed to hypergravity (4G, one hour/day). Cross-sections of ankle extensor muscles stained immunohistochemically against slow myosin (MHC) determined if hypergravity affects the distribution of slow muscle fibers. Comparisons (ANOVA) between exposed and unexposed animals show hypergravity causes increases in slow fiber density in soleus after fourteen (p=0.049) and thirty day (p=0.Ol9) exposures. Therefore, loading may induce faster development of soleus through increased slow fiber density. Slow fibers increase in plantaris in males after seven (p=0.008) and in females after fourteen days (p=0.003), suggesting hypergravity delays normal elimination of slow fibers. Lateral and intermediate heads of lateral gastrocnemius (LG) show greater numbers of slow fibers, overall, in exposed mice (p=0.003 both). A proximal compartment of LG (LGp) and medial gastrocnemius (MG) are minimally affected by hypergravity. In LGp, only males exposed for fourteen days show decreased slow fiber density (p=0.047), but MG increased slow fiber numbers in exposed females compared to controls (p=0.04).
Resumo:
Total knee arthroplasty (TKA) has revolutionized the life of millions of patients and it is the most efficient treatment in cases of osteoarthritis. The increase in life expectancy has lowered the average age of the patient, which requires a more enduring and performing prosthesis. To improve the design of implants and satisfying the patient's needs, a deep understanding of the knee Biomechanics is needed. To overcome the uncertainties of numerical models, recently instrumented knee prostheses are spreading. The aim of the thesis was to design and manifacture a new prototype of instrumented implant, able to measure kinetics and kinematics (in terms of medial and lateral forces and patellofemoral forces) of different interchangeable designs of prosthesis during experiments tests within a research laboratory, on robotic knee simulator. Unlike previous prototypes it was not aimed for industrial applications, but purely focusing on research. After a careful study of the literature, and a preliminary analytic study, the device was created modifying the structure of a commercial prosthesis and transforming it in a load cell. For monitoring the kinematics of the femoral component a three-layers, piezoelettric position sensor was manifactured using a Velostat foil. This sensor has responded well to pilot test. Once completed, such device can be used to validate existing numerical models of the knee and of TKA and create new ones, more accurate.It can lead to refinement of surgical techniques, to enhancement of prosthetic designs and, once validated, and if properly modified, it can be used also intraoperatively.
Resumo:
Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.
Resumo:
Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.
Resumo:
Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.
Resumo:
Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.
Resumo:
People with foot problems need special healthcare: foot care. Customized insoles can provide this care. They are inserts that are placed in the shoes. They correct biomechanical and postural inaccuracies in foot. Insole production contains four phases: foot image scanning, image validation, insole design and insole manufacturing. Currently, image scanning and validation is separated in location and time, i.e. podiatrists take images and insole designers validate them at different location and at different time. A cloud-based solution, the CloudSME one-stop shop simulation platform, enables remote access to image validation and insole design service deployed and running on the Cloud. The remote access allows podiatrists validating scanned image while the patient is in their offices. The simulation platform also supports remote design of customized insoles.