Contribution à la connaissance du métabolisme secondaire des Thymelaeaceae et investigation phytochimique de l'une d'elles: "Gnidia involucrata" Steud. ex A. Rich

Dans le but de mieux connaître le métabolisme secondaire de la famille des Thymelaeaceae et de découvrir de nouveaux composés naturels à intérêt thérapeutique, 30 extraits provenant de 8 espèces africaines ont été soumis à un criblage chimique et biologique. Les cibles biologiques suivantes ont servi à l?évaluation de l?activité des extraits étudiés : la moisissure phytopathogène Cladosporium cucumerinum, la levure commensale Candida albicans, la bactérie opportuniste Bacillus subtilis, la larve du moustique vecteur de la fièvre jaune Aedes aegypti et l?hôte intermédiaire mollusque de la schistosomiase urinaire Biomphalaria glabrata. Les propriétés antiradicalaires et inhibitrices de l?acétylcholinestérase de ces extraits ont également été dépistées. Des analyses sur CCM avec révélation chimique, ainsi que des expériences LC/DAD-UV, ont permis demettre en évidence la présence de tanins, de flavonoïdes et de xanthones dans les extraits polaires. Sur la base des résultats de ces analyses préliminaires, l?investigation phytochimique des extraits méthanoliques des racines et des parties aériennes de Gnidia involucrata a été entreprise. Cette démarche a permis l?isolement de 8 composés naturels et leur caractérisation complète au moyen de méthodes spectroscopiques (UV, MS, CD, 1H- et 13C-NMR). Les activités de ces produits purs ont été évaluées et il est apparu qu?ils possédaient presque tous des propriétés antiradicalaires intéressantes, supérieures à celles du BHT, un antioxydant de synthèse (E 321) utilisé dans l?industrie alimentaire. Deux benzophénones simples, respectivement O- et C-glucosylées, ont été isolées des parties aériennes de G. involucrata au côté de la mangiférine, une C-glycosylxanthone ubiquitaire. Ces découvertes sont remarquables à plusieurs titres : (1) les benzophénones simples (nonprénylées) sont très rares dans la nature ; (2) c?est la première fois qu?une Oglycosylbenzophénone a été décrite ; (3) aucune xanthone n?avait été mise en évidence auparavant dans la famille et (4) les benzophénones semblent ne pas être que des produits intermédiaires dans la biosynthèse des xanthones. Trois 3,8??-biflavanones du type GB ont été isolées des racines et des parties aériennes de la même plante, dont deux stéréoisomères se trouvant en mélange. Une analyse LC/CD a permis d?attribuer les configurations absolues des quatre carbones asymétriques de chaque molécule. Cette classe de métabolites secondaires est réputée pour ses propriétés analgésiques et sa présence chez les Thymelaeaceae est prometteuse. Des techniques couplées de pointe ont été utilisées dans ce travail et ont montré leur apport inestimable dans le domaine de la recherche phytochimique. Une analyse LC/ MSn a ainsi permis de mettre en évidence on-line trois C-glycosylflavones ? l?isoorientine, l?isovitexine et la vitexine ? dans les extraits méthanoliques bruts de G. involucrata. De plus, les parties aériennes de cette même plante ont servi de matériel pour le développement d?une nouvelle méthode d?analyse d?extraits bruts : la LC/1H-NMR time-slice. Cette approche consiste à « découper » le temps d?analyse par des interruptions régulières du flux LC, durant lesquelles les données NMR nécessaires sont acquises. Le problème de la faible sensibilité relative de la LC/NMR a été partiellement résolu par ce biais et a permis d?envisager l?utilisation de la NMR au sein de systèmes de couplages multiples en série avec d?autres méthodes spectrales (UV, MS, IR, CD,?).<br/><br/>With the aim of acquiring a better knowledge of the secondary metabolism of the family Thymelaeaceae and of the discovering of new natural therapeutics, 30 extracts from 8 African plant species were submitted to chemical and biological screening. The following biological targets were used to estimate the activity of the extracts under study: the phytopathogenic fungus Cladosporium cucumerinum, the commensal yeast Candida albicans, the opportunistic bacteria Bacillus subtilis, larvae of the yellow fever-transmitting mosquito Aedes aegypti and the intermediate snail host of urinary schistosomiasis Biomphalaria glabrata. The antiradical and acetylcholinesterase-inhibiting properties of these extracts were also investigated. TLC analyses followed by chemical detection, together with LC/DAD-UV experiments, showed the presence of tannins, flavonoids and xanthones in the polar extracts. On the basis of these results, a phytochemical investigation of the methanol extracts of the roots and the aerial parts of Gnidia involucrata was undertaken. This procedure led to the isolation of 8 natural products, which were then characterised by spectroscopic means (UV, MS, CD, 1H- and 13C-NMR). The activities of the pure compounds were then further evaluated: almost all of them exhibited very interesting antiradical properties, superior to those of BHT, a synthetic antioxidant (E 321) used in the food industry. Two simple benzophenones, one O- and one C-glycosylated, were isolated from the aerial parts of G. involucrata, together with mangiferin, a ubiquitous C-glycosylxanthone. These findings are of multiple importance: (1) simple (non-prenylated) benzophenones are very rare in nature; (2) it is the first time that an O-glycosylbenzophenone has been described; (3) no xanthones have been previously reported in the family and (4) benzophenones do not seem to be exclusive intermediates in the biosynthesis of xanthones. Three 3,8??-biflavanones of the GB type were isolated from the roots and the aerial parts of the same plant, among them two stereoisomers in mixture. A LC/CD analysis allowed the assignment of the absolute configurations of all four stereocenters in both molecules. This class of secondary metabolite is well known for its analgesic properties and its presence in the Thymelaeaceae is very promising. Advanced hyphenated techniques were used in this work and showed their inestimable contribution to the field of phytochemical research. A LC/MSn analysis, for example, allowed the on-line characterisation of three C-glycosylflavones ? isoorientin, isovitexin and vitexin ? in the crude methanol extracts of G. involucrata. Furthermore, the aerial parts of this plant were used as material for the development of a new analytical method for crude plant extracts: time-slice LC/1H-NMR. This approach consisted in "slicing" the analytical procedure by interrupting the LC flow at given intervals, during which the necessary NMR data were acquired. The relative lack of sensitivity of LC/NMR was partially surmounted by this means, allowing one to envisage the use of NMR in a multiple hyphenated system, together with other spectroscopic methods (UV, MS, IR, CD,?)

Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine

In order that the radius and thus ununiform structure of the teeth and otherelectrical and magnetic parts of the machine may be taken into consideration the calculation of an axial flux permanent magnet machine is, conventionally, doneby means of 3D FEM-methods. This calculation procedure, however, requires a lotof time and computer recourses. This study proves that also analytical methods can be applied to perform the calculation successfully. The procedure of the analytical calculation can be summarized into following steps: first the magnet is divided into slices, which makes the calculation for each section individually, and then the parts are submitted to calculation of the final results. It is obvious that using this method can save a lot of designing and calculating time. Thecalculation program is designed to model the magnetic and electrical circuits of surface mounted axial flux permanent magnet synchronous machines in such a way, that it takes into account possible magnetic saturation of the iron parts. Theresult of the calculation is the torque of the motor including the vibrations. The motor geometry and the materials and either the torque or pole angle are defined and the motor can be fed with an arbitrary shape and amplitude of three-phase currents. There are no limits for the size and number of the pole pairs nor for many other factors. The calculation steps and the number of different sections of the magnet are selectable, but the calculation time is strongly depending on this. The results are compared to the measurements of real prototypes. The permanent magnet creates part of the flux in the magnetic circuit. The form and amplitude of the flux density in the air-gap depends on the geometry and material of the magnetic circuit, on the length of the air-gap and remanence flux density of the magnet. Slotting is taken into account by using the Carter factor in the slot opening area. The calculation is simple and fast if the shape of the magnetis a square and has no skew in relation to the stator slots. With a more complicated magnet shape the calculation has to be done in several sections. It is clear that according to the increasing number of sections also the result will become more accurate. In a radial flux motor all sections of the magnets create force with a same radius. In the case of an axial flux motor, each radial section creates force with a different radius and the torque is the sum of these. The magnetic circuit of the motor, consisting of the stator iron, rotor iron, air-gap, magnet and the slot, is modelled with a reluctance net, which considers the saturation of the iron. This means, that several iterations, in which the permeability is updated, has to be done in order to get final results. The motor torque is calculated using the instantaneous linkage flux and stator currents. Flux linkage is called the part of the flux that is created by the permanent magnets and the stator currents passing through the coils in stator teeth. The angle between this flux and the phase currents define the torque created by the magnetic circuit. Due to the winding structure of the stator and in order to limit the leakage flux the slot openings of the stator are normally not made of ferromagnetic material even though, in some cases, semimagnetic slot wedges are used. In the slot opening faces the flux enters the iron almost normally (tangentially with respect to the rotor flux) creating tangential forces in the rotor. This phenomenon iscalled cogging. The flux in the slot opening area on the different sides of theopening and in the different slot openings is not equal and so these forces do not compensate each other. In the calculation it is assumed that the flux entering the left side of the opening is the component left from the geometrical centre of the slot. This torque component together with the torque component calculated using the Lorenz force make the total torque of the motor. It is easy to assume that when all the magnet edges, where the derivative component of the magnet flux density is at its highest, enter the slot openings at the same time, this will have as a result a considerable cogging torque. To reduce the cogging torquethe magnet edges can be shaped so that they are not parallel to the stator slots, which is the common way to solve the problem. In doing so, the edge may be spread along the whole slot pitch and thus also the high derivative component willbe spread to occur equally along the rotation. Besides forming the magnets theymay also be placed somewhat asymmetric on the rotor surface. The asymmetric distribution can be made in many different ways. All the magnets may have a different deflection of the symmetrical centre point or they can be for example shiftedin pairs. There are some factors that limit the deflection. The first is that the magnets cannot overlap. The magnet shape and the relative width compared to the pole define the deflection in this case. The other factor is that a shifting of the poles limits the maximum torque of the motor. If the edges of adjacent magnets are very close to each other the leakage flux from one pole to the other increases reducing thus the air-gap magnetization. The asymmetric model needs some assumptions and simplifications in order to limit the size of the model and calculation time. The reluctance net is made for symmetric distribution. If the magnets are distributed asymmetrically the flux in the different pole pairs will not be exactly the same. Therefore, the assumption that the flux flows from the edges of the model to the next pole pairs, in the calculation model from one edgeto the other, is not correct. If it were wished for that this fact should be considered in multi-pole pair machines, this would mean that all the poles, in other words the whole machine, should be modelled in reluctance net. The error resulting from this wrong assumption is, nevertheless, irrelevant.

Predictions of the MCMI-III personality disorders from NEO-PI-R domains and facets: Comparison between American and Spanish samples

Este estudio ex post facto analiza las relaciones entre las dimensiones y facetas del NEO-PI-R y los 14 trastornos de personalidad del MCMI-III en una muestra no clínica española (N = 674). Se exploran las diferencias y similitudes con los resul- tados de Dyce y O’Connor en una muestra americana con los mismos instrumentos. Como se esperaba, los análisis factoriales de facetas reteniendo cinco factores mostraron un modelo de relaciones muy similar entre ambas muestras, con un coeficiente de la congruencia total de 0,92, y coeficientes de congruencia de factor aceptables, salvo para el factor Apertura (0,68). En consonancia con las predicciones de Widiger y Widiger et al. los porcentajes de correlaciones significativas estaban alrededor de 60% en ambas muestras, y la mayoría coincidían. El análisis de regresión múltiple con dimensiones también reveló un gran parecido entre los resultados americanos y españoles, Neuroticismo fue el predictor más relacionado con los trastornos de personalidad. Se encontraron diferencias en las regresiones por facetas, aunque la varianza explicada fue prácticamente la misma que en las dimensiones. Se discute la validez transcultural y el valor predictivo del NEO-PI-R sobre los trastornos de personalidad del MCMI-III, junto con las ventajas relativas de las facetas sobre las dimensiones.

Can eukaryotic cells monitor the presence of unreplicated DNA?

Completion of DNA replication before mitosis is essential for genome stability and cell viability. Cellular controls called checkpoints act as surveillance mechanisms capable of detecting errors and blocking cell cycle progression to allow time for those errors to be corrected. An important question in the cell cycle field is whether eukaryotic cells possess mechanisms that monitor ongoing DNA replication and make sure that all chromosomes are fully replicated before entering mitosis, that is whether a replication-completion checkpoint exists. From recent studies with smc5–smc6 mutants it appears that yeast cells can enter anaphase without noticing that replication in the ribosomal DNA array was unfinished. smc5–smc6 mutants are proficient in all known cellular checkpoints, namely the S phase checkpoint, DNA-damage checkpoint, and spindle checkpoint, thus suggesting that none of these checkpoints can monitor the presence of unreplicated segments or the unhindered progression of forks in rDNA. Therefore, these results strongly suggest that normal yeast cells do not contain a DNA replication-completion checkpoint.

La génesis de la división territorial contemporánea en la España atlántica (Galicia, Asturias, Cantabria y El Bierzo)

Se estudian los antecedentes y gestación de la actual división provincial en la España atlántica, durante la transición del antiguo régimen al liberalismo (1800-1850). Las provincias se entienden como resultado de la convergencia de la voluntad racionalista y uniformadora del Estado con los intereses de auto-organización regional de la periferia.

Reexposure and advection of C-14-depleted organic carbon from old deposits at the upper continental slope

Outcrops of old strata at the shelf edge resulting from erosive gravity-driven flows have been globally described on continental margins. The reexposure of old strata allows for the reintroduction of aged organic carbon (OC), sequestered in marine sediments for thousands of years, into the modern carbon cycle. This pool of reworked material represents an additional source of C-14-depleted organic carbon supplied to the ocean, in parallel with the weathering of fossil organic carbon delivered by rivers from land. To understand the dynamics and implications of this reexposure at the shelf edge, a biogeochemical study was carried out in the Gulf of Lions (Mediterranean Sea) where erosive processes, driven by shelf dense water cascading, are currently shaping the seafloor at the canyon heads. Mooring lines equipped with sediment traps and current meters were deployed during the cascading season in the southwestern canyon heads, whereas sediment cores were collected along the sediment dispersal system from the prodelta regions down to the canyon heads. Evidence from grain-size, X-radiographs and Pb-210 activity indicate the presence in the upper slope of a shelly-coarse surface stratum overlying a consolidated deposit. This erosive discontinuity was interpreted as being a result of dense water cascading that is able to generate sufficient shear stress at the canyon heads to mobilize the coarse surface layer, eroding the basal strata. As a result, a pool of aged organic carbon (Delta C-14 = -944.5 +/- 24.7%; mean age 23,650 +/- 3,321 ybp) outcrops at the modern seafloor and is reexposed to the contemporary carbon cycle. This basal deposit was found to have relatively high terrigenous organic carbon (lignin = 1.48 +/- 0.14 mg/100 mg OC), suggesting that this material was deposited during the last low sea-level stand. A few sediment trap samples showed anomalously depleted radiocarbon concentrations (Delta C-14 = -704.4 +/- 62.5%) relative to inner shelf (Delta C-14 = -293.4 +/- 134.0%), mid-shelf (Delta C-14 = -366.6 +/- 51.1%), and outer shelf (Delta C-14 = -384 +/- 47.8%) surface sediments. Therefore, although the major source of particulate material during the cascading season is resuspended shelf deposits, there is evidence that this aged pool of organic carbon can be eroded and laterally advected downslope.

Positive Outcomes Influence the Rate and Time to Publication, but Not the Impact Factor of Publications of Clinical Trial Results

Objectives: Publication bias may affect the validity of evidence based medical decisions. The aim of this study is to assess whether research outcomes affect the dissemination of clinical trial findings, in terms of rate, time to publication, and impact factor of journal publications. Methods and Findings: All drug-evaluating clinical trials submitted to and approved by a general hospital ethics committee between 1997 and 2004 were prospectively followed to analyze their fate and publication. Published articles were identified by searching Pubmed and other electronic databases. Clinical study final reports submitted to the ethics committee, final reports synopses available online and meeting abstracts were also considered as sources of study results. Study outcomes were classified as positive (when statistical significance favoring experimental drug was achieved), negative (when no statistical significance was achieved or it favored control drug) and descriptive (for non-controlled studies). Time to publication was defined as time from study closure to publication. A survival analysis was performed using a Cox regression model to analyze time to publication. Journal impact factors of identified publications were recorded. Publication rate was 48·4% (380/785). Study results were identified for 68·9% of all completed clinical trials (541/785). Publication rate was 84·9% (180/212) for studies with results classified as positive and 68·9% (128/186) for studies with results classified as negative (p<0·001). Median time to publication was 2·09 years (IC95 1·61-2·56) for studies with results classified as positive and 3·21 years (IC95 2·69-3·70) for studies with results classified as negative (hazard ratio 1·99 (IC95 1·55-2·55). No differences were found in publication impact factor between positive (median 6·308, interquartile range: 3·141-28·409) and negative result studies (median 8·266, interquartile range: 4·135-17·157). Conclusions: Clinical trials with positive outcomes have significantly higher rates and shorter times to publication than those with negative results. However, no differences have been found in terms of impact factor.

Vulnerability as a heuristic for interdisciplinary research: Assessing the thematic and methodological structure of empirical life-course studies

Changes in human lives are studied in psychology, sociology, and adjacent fields as outcomes of developmental processes, institutional regulations and policies, culturally and normatively structured life courses, or empirical accounts. However, such studies have used a wide range of complementary, but often divergent, concepts. This review has two aims. First, we report on the structure that has emerged from scientific life course research by focusing on abstracts from longitudinal and life course studies beginning with the year 2000. Second, we provide a sense of the disciplinary diversity of the field and assess the value of the concept of 'vulnerability' as a heuristic tool for studying human lives. Applying correspondence analysis to 10,632 scientific abstracts, we find a disciplinary divide between psychology and sociology, and observe indications of both similarities of-and differences between-studies, driven at least partly by the data and methods employed. We also find that vulnerability takes a central position in this scientific field, which leads us to suggest several reasons to see value in pursuing theory development for longitudinal and life course studies in this direction.

Historical trends of organochlorine pesticides in a sediment core from the Gulf of Batabanó, Cuba.

Sediments can be natural archives to reconstruct the history of pollutant inputs into coastal areas. This is important to improve management strategies and evaluate the success of pollution control measurements. In this work, the vertical distribution of organochlorine pesticides (DDTs, Lindane, HCB, Heptachlor, Aldrin and Mirex) was determined in a sediment core collected from the Gulf of Batabanó, Cuba, which was dated by using the (210)Pb dating method and validated with the (239,240)Pu fallout peak. Results showed significant changes in sediment accumulation during the last 40 years: recent mass accumulation rates (0.321 g cm(-2) yr(-1)) double those estimated before 1970 (0.15 g cm(-2) yr(-1)). This change matches closely land use change in the region (intense deforestation and regulation of the Colon River in the late 1970s). Among pesticides, only DDTs isomers, Lindane and HCB were detected, and ranged from 0.029 to 0.374 ng g(-1) dw for DDTs, from<0.006 to 0.05 ng g(-1) dw for Lindane and from<0.04 to 0.134 ng g(-1) dw for HCB. Heptachlor, Aldrin and Mirex were below the detection limits (∼0.003 ng g(-1)), indicating that these compounds had a limited application in the Coloma watershed. Pesticide contamination was evident since the 1970s. DDTs and HCB records showed that management strategies, namely the banning the use of organochlorine contaminants, led to a concentration decline. However, Lindane, which was restricted in 1990, can still be found in the watershed. According to NOAA guidelines, pesticides concentrations encountered in these sediments are low and probably not having an adverse effect on sediment dwelling organisms.

On the Analysis and Control of a Linear Synchronous Servomotor with a Flexible Load

Industry's growing need for higher productivity is placing new demands on mechanisms connected with electrical motors, because these can easily lead to vibration problems due to fast dynamics. Furthermore, the nonlinear effects caused by a motor frequently reduce servo stability, which diminishes the controller's ability to predict and maintain speed. Hence, the flexibility of a mechanism and its control has become an important area of research. The basic approach in control system engineering is to assume that the mechanism connected to a motor is rigid, so that vibrations in the tool mechanism, reel, gripper or any apparatus connected to the motor are not taken into account. This might reduce the ability of the machine system to carry out its assignment and shorten the lifetime of the equipment. Nonetheless, it is usually more important to know how the mechanism, or in other words the load on the motor, behaves. A nonlinear load control method for a permanent magnet linear synchronous motor is developed and implemented in the thesis. The purpose of the controller is to track a flexible load to the desired velocity reference as fast as possible and without awkward oscillations. The control method is based on an adaptive backstepping algorithm with its stability ensured by the Lyapunov stability theorem. As a reference controller for the backstepping method, a hybrid neural controller is introduced in which the linear motor itself is controlled by a conventional PI velocity controller and the vibration of the associated flexible mechanism is suppressed from an outer control loop using a compensation signal from a multilayer perceptron network. To avoid the local minimum problem entailed in neural networks, the initial weights are searched for offline by means of a differential evolution algorithm. The states of a mechanical system for controllers are estimated using the Kalman filter. The theoretical results obtained from the control design are validated with the lumped mass model for a mechanism. Generalization of the mechanism allows the methods derived here to be widely implemented in machine automation. The control algorithms are first designed in a specially introduced nonlinear simulation model and then implemented in the physical linear motor using a DSP (Digital Signal Processor) application. The measurements prove that both controllers are capable of suppressing vibration, but that the backstepping method is superior to others due to its accuracy of response and stability properties.

Hepatitis C Virus Awareness Among Men Who Have Sex With Men in Southwest Switzerland.

BACKGROUND: In Switzerland, the incidence of hepatitis C virus (HCV) infection in HIV-positive men who have sex with men (MSM) rose 18-fold between 1998 and 2011. We aimed to evaluate transmission risk factors, awareness, and seroprevalence of HCV among MSM in southwest Switzerland. METHODS: From 1st June 2011 to 31st August 2012, trained health care professionals invited individuals attending (1) MSM screening clinics and (2) indoor and outdoor meeting areas to complete an anonymous questionnaire. Consenting participants were rapid tested for HCV (OraQuick HCV Rapid Antibody Test). RESULTS: Of 918 MSM approached, 654 agreed to participate, most of whom (536, 82%) were enrolled via MSM screening clinics. Of 654 participants, 21 (3.2%) disclosed being HIV positive; 140 (21%) had unknown HIV status. In the preceding 12 months, 357 (55%) of 654 participants reported unprotected anal intercourse (UAI) and 321 (49%) of 654 participants reported UAI with partners of different/unknown HIV status. Not HIV serosorting was reported more frequently among HIV-positive individuals (76%, P < 0.001). Three hundred two participants (46%) were aware of HCV, awareness being higher among clinic than meeting area participants (49% vs. 33%, P = 0.04). One individual (of 654; 0.2%), with a negative HIV test result 18 months previously was newly diagnosed as being HCV positive on rapid testing. CONCLUSIONS: In this sample of predominantly HIV-negative MSM, half the participants were aware of HCV and HCV seroprevalence was low. However, high rates of UAI and of UAI without HIV serosorting were reported. Given the increasing incidence of HCV among HIV-positive men, we propose that HCV counseling should be offered to MSM regardless of HIV status, with testing offered to those at high risk.