995 resultados para 369.4, 019.9


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The goal of the present study was to investigate the growth rate of the crab Dissodactylus crinitiehelis, its molt increments, and the duration of the intermolt intervals under laboratory conditions, focusing on differences between sexes and between juvenile and adult phases. Crabs were collected at Flamengo Beach, Ubatuba, São Paulo State, Brazil, by scuba divers. In the laboratory, individuals were maintained in isolation and fed nauplii of Artemia sp. daily. The sex and carapace width of exuviae and dead crabs were recorded. During the juvenile phase, mean growth was 11.8 +/- 2.7% in males and 11.2 +/- 3.6% in females, with their respective intermolt intervals 25.4 +/- 9.2 and 26.4 +/- 8.3 d (mean +/- SD). After reaching morphological sexual maturity, the intermolt intervals increased to 33.4 10.1 d in males and 32.7 +/- 10.4 d in females, and the growth rates of both sexes slowed to 6.4 +/- 1.9% in males and 5.7 +/- 1.6% in females. There was a significant decrease in molt increment and an increase in intermolt intervals associated with the maturation from juveniles to adults, evidencing differential energy allocation during the last phase of ontogeny.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Comparative cytogenetic analyses were carried out in six species of Brachycephalidae from southeastern Brazil. Barycholos ternetzi, Eleutherodactylus binotatus, Eleutherodactylus guentheri, Eleutherodactylus juipoca, Eleutherodactylus parvus and Eleutherodactylus sp. have 2n = 22 karyotypes with a marked variation in the morphology of chromosome pairs 8, 10 and 11, which are of telocentric or metacentric types, resulting in FN = 38, 40 and 44. Eleutherodactylus have a single chromosome pair bearing Ag-NOR, i.e. pair 1 in E. binotatus, pair 6 in E. guentheri and E. parvus, and pair 11 in E. juipoca and Eleutherodactylus sp. In contrast, B. ternetzi showed Ag-positive sites in the chromosome pairs 1, 4, 5, 9 and 11, and only one to three labelings per metdphase in each individual. Nevertheless, the main chromosome pair with Ag-NOR in the species seems to be the 11th, like in E. juipoca and Eleutherodactylus sp. The NOR site was confirmed by fluorescence in situ hybridization (FISH) technique in E. binotatus and in B. ternetzi, bearing 1p1p and 9p11p11p Ag-NOR pattern, respectively. All the species exhibited predominantly centromeric C-banding pattern, but interstitial bands have also been observed in some cases. In E. binotatus, there is an indication of geographical difference in the distribution of the interstitial C-bands. The fluorochromes GC-specific chromomycin A(3) (CMA(3)) and AT-specific 4',6-diamidino-2-phenylindole (DAPI), with distamycin A (DA) counterstaining, provided the molecular content of some repetitive regions in the karyotypes of the species. One male of E. binotatus presented an extensive heteromorphism, involving at least five different pairs, probably as a consequence of multiple reciprocal translocations. Such rearrangements might be responsible for the multivalent chain seen in the meiosis of this specimen, as well as in another male, although not exhibiting chromosome heteromorphism. The remaining males and those belonging to the other species have always shown 11 bivalents in diplotene and metaphase I cells. In all male specimens, metaphases II presented 11 chromosomes. Despite the observed discrepancies, the five species of Eleutherodactylus have a great uniformity in the 2n = 22 karyotypes, suggesting an assemblage of species from southeastern and southern Brazil, in contrast to northern and northeastern assemblage which is characterized by higher diploid numbers. Undoubtedly, B. ternetzi could be included in that proposed assemblage, due to its karyotypic similarity with the Eleutherodactylus species, as evidenced in the present study. This fact strongly supports the close relationships of both genera, previously inferred on the basis of several characters shared by their species. (C) 2006 Elsevier Ltd. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

OBJETIVO: Verificar a influência de dois diferentes intervalos de recuperação (IR) entre as séries no exercício leg-press sobre o número e sustentabilidade das repetições e no volume total, em idosas não treinadas. MÉTODOS: Onze idosas (66,5 ± 5,0 anos; 59,2 ± 9,1kg; 146,4 ± 34,9cm) foram submetidas a duas sessões experimentais de exercícios com pesos com intensidade de 15 repetições máximas. Cada sessão experimental foi composta por três séries realizadas até a fadiga muscular utilizando IR de um (IR-1) ou três minutos (IR-3). As sessões experimentais foram separadas por, no mínimo, 48 horas. Todas as participantes realizaram ambos os protocolos e um delineamento cross-over balanceado foi utilizado para determinar a ordem das sessões experimentais. RESULTADOS: Para ambos os IR entre as séries, reduções significativas (P < 0,05) no número e na sustentabilidade das repetições foram observadas da primeira para a segunda e terceira séries e da segunda para a terceira séries. Diferenças significativas (P < 0,05) entre os IR foram observadas nas duas séries finais. O volume total da sessão realizada com IR-3 foi estatisticamente superior (20,4%; P < 0,05) quando comparada a sessão IR-1. CONCLUSÃO: O número e a sustentabilidade das repetições e o volume total de treino de idosas não treinadas são influenciados pelo IR empregado entre as séries. Maiores IR devem ser utilizados quando a finalidade for otimizar o volume de treino por meio da sustentabilidade das repetições. Em contrapartida, menores IR devem ser utilizados quando a meta for obter maiores níveis de fadiga muscular.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

CONTEXTUALIZAÇÃO: A dor e a disfunção no complexo articular do ombro é comumente encontrada na prática fisioterapêutica. Essas anormalidades musculoesqueléticas estão relacionadas à instabilidade e inadequado funcionamento cinemático, que dependem da integridade dos tecidos musculares. Assim, no sentido de prevenir e reabilitar esses sintomas, o uso da haste oscilatória vem sendo implantado para melhorar os resultados de técnicas cinesioterapêuticas. OBJETIVOS: Analisar a atividade eletromiográfica (EMG) dos músculos que estabilizam a articulação do ombro durante a realização de exercícios com haste oscilatória e haste não-oscilatória. MÉTODOS: Participaram do estudo 12 voluntárias com idade de 20,4±1,9 anos. Os dados EMG foram coletados nos músculos trapézio superior (TrS), trapézio inferior (TrI) e deltoide médio (DM) durante três diferentes exercícios realizados com haste oscilatória e haste não-oscilatória. O sinal EMG foi analisado no domínio do tempo pelo cálculo do Root Mean Square (RMS). Os valores de RMS foram normalizados pelo valor de pico obtido em todas as tentativas por cada músculo. A análise estatística foi feita com os testes ANOVA para medidas repetidas e post-hoc de Bonferroni. RESULTADOS: A atividade EMG dos músculos TrS, TrI e DM foi significativamente maior nos exercícios com haste oscilatória do que com haste não-oscilatória (todos p<0,001). Não foram significativas as diferenças na ativação desses músculos entre os exercícios. CONCLUSÃO: Os resultados do presente estudo indicaram que a haste oscilatória requisitou maior atividade EMG dos músculos do ombro e, assim, pode ser um instrumento útil no treinamento desses músculos.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The health-promoting effects of exercise training (ET) are related to nitric oxide (NO) production and/or its bioavailability. The objective of this study was to determine whether single nucleotide polymorphism of the endothelial NO synthase (eNOS) gene at positions -786T>C, G894T (Glu298Asp) and at the variable number of tandem repeat (VNTR) Intron 4b/a would interfere with the cardiometabolic responses of postmenopausal women submitted to physical training. Forty-nine postmenopausal women were trained in sessions of 30-40 min, 3 days a week for 8 weeks. Genotypes, oxidative stress status and cardiometabolic parameters were then evaluated in a double-blind design. Both systolic and diastolic blood pressure values were significantly reduced after ET, which was genotype-independent. However, women without eNOS gene polymorphism at position -786T>C (TT genotype) and Intron 4b/a (bb genotype) presented a better reduction of total cholesterol levels (-786T>C: before = 213 ± 12.1, after = 159.8 ± 14.4, Δ = -24.9% and Intron 4b/a: before = 211.8 ± 7.4, after = 180.12 ± 6.4 mg/dL, Δ = -15%), and LDL cholesterol (-786T>C: before = 146.1 ± 13.3, after = 82.8 ± 9.2, Δ = -43.3% and Intron 4b/a: before = 143.2 ± 8, after = 102.7 ± 5.8 mg/dL, Δ = -28.3%) in response to ET compared to those who carried the mutant allele. Superoxide dismutase activity was significantly increased in trained women whereas no changes were observed in malondialdehyde levels. Women without eNOS gene polymorphism at position -786T>C and Intron 4b/a showed a greater reduction of plasma cholesterol levels in response to ET. Furthermore, no genotype influence was observed on arterial blood pressure or oxidative stress status in this population.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this study was to access the P-t(Lim) model in swimming, applying the load control available in full tethered swim condition. Its physiological meaning for the determination of boundary of heavy/severe domains was assessed from the relationships with critical velocity (CV), critical power (CP) and maximal lactate steady state (MLSS). The velocity at MLSS (v(MLSS) = 1.17 +/- 0.11 m/s) and CV (1.19 +/- 0.12 m/s) were significantly different. Similarly, the power at MLSS (p(MFEL) = 89.2 +/- 15.1 W) and CP (99.4 +/- 22.9 W) were significantly different. There was no difference between lactate concentration at vMLSS (3.54 +/- 0.9 mM) and p(MLSS) (3.76 +/- 0.6 mM). Significant Pearson's coefficients (r > 0.70) were observed among v(MLSS) and P-MLSS with their respective values on time-limited model. Thus, the tethered-crawl condition seems to be valid to determine the boundary of heavy/severe domains, and to access the aerobic capacity of swimmers.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Ten species of Hyla with 2n = 30 from Brazilian fauna were analysed cytogenetically. Hyla minuta is the unique presenting all bi-armed metacentric or submetacentric chromosomes in the karyotype, therefore, with the highest FN = 60. The remaining species have a variable number of uni-armed telocentric or subtelo-centric chromosomes: H. cruzi, H. elianeae, and H. rubicundula with three pairs (FN = 54), H. berthalutzae, H. elegans, H. microps, and H. nana with four pairs (FN = 52), and H. nahdereri and H. sanborni with five pairs (FN = 50). The uni-armed elements are among pairs 5, 6, 7, 11, 14, and 15, which also appeared with metacentric or submetacentric morphology. The remaining chromosome pairs 1, 2, 3, 4, 8, 9,10, 12, and 13 were never found to be telocentric or subtelocentric. AgNOR patterns are species-specific, the majority of the species exhibiting a single pair with AgNORs, with the exception of H. elegans and H. nana with more than one chromosome pair bearing this cytological marker. C banding was obtained in H. berthalutzae, H. cruzi, H. elegans, H. elianeae, H. microps, H. minuta, H. nahdereri, and H. nana, which showed positively stained centromeric heterochromatin. Our analysis confirms the great karyotypic diversity in the species of Hyla with 2n = 30, with no species sharing identical karyotypes.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The thermophilic fungus Thermoascus aurantiacus 179-5 and the mesophilic Aureobasidium pullulans ER-16 were cultivated in corn-cob by solid state fermentation for P-glucosidase production. After fermentation both enzymes were purified. The beta-glucosidases produced by the strains A. pullulans and T aurantiacus were most active at pH 4.0-4.5 and 4.5, with apparent optimum temperatures at 80 and 75 degrees C, respectively. Surprisingly, the enzyme produced by the mesophilic A. pullulans was stable over a wider range of pH (4.5-9.5 against 4.5-6.5) and more thermostable (98% after 1 h at 75 degrees C against 98% after 1 h at 70 degrees C) than the enzyme from the thermophilic T. aurantiacus. The t((1/2)) at 80 degrees C were 90 and 30 min for A. pullulans and T. aurantiacus, respectively. beta-Glucosidase thermoinactivation followed first-order kinetics and the energies of denaturation were 414 and 537 kJ mol(-1) for T. aurantiacus and A. pullulans, respectively. The result showed that beta-glucosidase obtained from the mesophilic A. pullulans is more stable than that obtained from the thermophilic T. aurantiacus. (C) 2007 Elsevier Ltd. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this study was to evaluate the durability of bond strength between a resin cement and aluminous ceramic submitted to various surface conditioning methods. Twenty-four blocks (5 X 5 X 4 mm 3) of a glass-in filtrated zirconia-alumina ceramic (inCeram Zirconia Classic) were randomly divided into three surface treatment groups: ST1-Air-abrasion with 110-mu m Al2O3 particles + silanization; ST2-Laboratory tribochemical silica coating method (110-mu m Al2O3, ilO-PM Silica) (Rocatec) + silanization; ST3-Chairside tribochemical silica coating method (30-mu m SiOx) (CoJet) + silanization. Each treated ceramic block was placed in its silicone mold with the treated surface exposed. The resin cement (Panavia F) was prepared and injected into the mold over the treated surface. Specimens were sectioned to achieve nontrimmed bar specimens (14 sp/block) that were randomly divided into two conditions: (a) Dry-microtensile test after sectioning; (b) Thermocycling (TC)-(6,000X, 5-55 degrees C) and water storage (150 days). Thus, six experimental groups were obtained (11 = 50): Gr1-ST1 + dry; Gr2-ST1 + TC. Gr3-ST2 + dry; Gr4-ST2 + TC; Gr5-ST3 + dry; Gr6ST3 + TC. After microtensile testing, the failure types were noted. ST2 (25.1 +/- 11) and ST3 (24.1 +/- 7.4) presented statistically higher bond strength (MPa) than that of STI (17.5 +/- 8) regardless of aging conditions (p < 0.0001). While Gr2 revealed the lowest results (13.3 +/- 6.4), the other groups (21.7 +/- 7.4-25. 9 +/- 9.1) showed statistically no significant differences (two-way ANOVA and Tukey's test, a 0.05). The majority of the failures were mixed (82%) followed by adhesive failures (18%). Gr2 presented significantly higher incidence of ADHESIVE failures (54%) than those of other groups (p = 0.0001). Both laboratory and chairside silica coating plus silanization showed durable bond strength. After aging, airabrasion with 110-mu m Al2O3 + silanization showed the largest decrease indicating that aging is fundamental for bond strength testing for acid-resistant Arconia ceramics in order to estimate their long-term performance in the mouth. (c) 2007 Wiley Periodicals, Inc.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objectives. This study evaluated the effect of thermal- and mechanical-cycling on the shear bond strength of three low-fusing glassy matrix dental ceramics to commercial pure titanium (cpTi) when compared to conventional feldspathic ceramic fused to gold alloy.Methods. Metallic frameworks (diameter: 5 min, thickness: 4 mm) (N = 96, n = 12 per group) were cast in cpTi and gold alloy, airborne particle abraded with 150 mu m aluminum oxide. Low-fusing glassy matrix ceramics and a conventional feldspathic ceramic were fired onto the alloys (thickness: 4mm). Four experimental groups were formed; Gr1 (control group): Vita Omega 900-Au-Pd alloy; Gr2: Ticeram-cpTi; Gr3: Super Porcelain Ti-22-cpTi and G4: Vita Titankeramik-cpTi. While half of the specimens from each ceramic-metal combination were randomly tested without aging (water storage at 37 C for 24h only), the other half were first thermocycled (6000 cycles, between 5 and 55 C, dwell time: 13 s) and then mechanically loaded (20,000 cycles under SON load, immersion in distilled water at 37 C). The ceramic-alloy interfaces were loaded under shear in a universal test machine (cross-head speed: 0.5 mm/min) until failure occur-red. Failure types were noted and the interfaces of the representative fractured specimens from each group were examined with stereo microscope and scanning electron microscope (SEM). in an additional study (N = 16, n = 2 per group), energy dispersive X-ray spectroscopy (EDS) analysis was performed from ceramic-alloy interfaces. Data were analyzed using ANOVA and Tukey's test.Results. Both ceramic-metal combinations (p < 0.001) and aging conditions (p < 0,001) significantly affected the mean bond strength values. Thermal- and mechanical-cycling decreased the bond strength (MPa) results significantly for Gr3 (33.4 +/- 4.2) and Gr4 (32.1 +/- 4.8) when compared to the non-aged groups (42.9 +/- 8.9, 42.4 +/- 5.2, respectively). Gr1 was not affected significantly from aging conditions (61.3 +/- 8.4 for control, 60.7 +/- 13.7 after aging) (p > 0.05). Stereomicroscope images showed exclusively adhesive failure types at the opaque ceramic-cpTi interfacial zone with no presence of ceramic on the substrate surface but with a visible dark titanium oxide layer in Groups 2-4 except Gr1 where remnants of bonder ceramic was visible. EDS analysis from the interfacial zone for cpTi-ceramic groups showed predominantly 34.5-85.1% O(2) followed by 1.1-36.7% Aland 0-36.3% Si except for Super Porcelain Ti-22 where a small quantity of Ba (1.4-8.3%), S (0.7%) and Sn (35.3%) was found. In the Au-Pd alloy-ceramic interface, 56.4-69.9% O(2) followed by 15.6-26.2% Si, 3.9-10.9% K, 2.8-6% Na, 4.4-9.6% Al and 0-0.04% Mg was observed.Significance. After thermal-cycling for 6000 times and mechanical-cycling for 20,000 times, Triceram-cpTi combination presented the least decrease among other ceramic-alloy combinations when compared to the mean bond strength results with Au-Pd alloy-Vita Omega 900 combination. (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We report the first direct observation of the strange b baryon Xi(-)(b)(Xi) over bar (+)(b)). We reconstruct the decay Xi(-)(b)-->J/psi Xi(-), with J/psi-->mu(+)mu(-), and Xi(-)-->Lambda pi(-)-->p pi(-)pi(-) in p (p) over bar collisions at root s = 1.96 TeV. Using 1.3 fb(-1) of data collected by the D0 detector, we observe 15.2 +/- 4.4(stat)(-0.4)(+1.9)(syst) Xi(-)(b) candidates at a mass of 5.774 +/- 0.011(stat) +/- 0.015(syst) GeV. The significance of the observed signal is 5.5 sigma, equivalent to a probability of 3.3 x 10(-8) of it arising from a background fluctuation. Normalizing to the decay Lambda(b)-->J/psi Lambda, we measure the relative rate sigma(Xi(-)(b))xB(Xi(-)(b)-->J/psi Xi)/ sigma(Lambda(b))xB(Lambda(b)-->J/psi Lambda) = 0.28 +/- 0.09(stat)(-0.08)(+0.09)(syst).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)