Thermal effects in Ni/Au and Mo/Au gate metallization AlGaN/GaN HEMT's reliability

AlGaN/GaN high electron mobility transistors (HEMT) are key devices for the next generation of high-power, high-frequency and high-temperature electronics applications. Although significant progress has been recently achieved [1], stability and reliability are still some of the main issues under investigation, particularly at high temperatures [2-3]. Taking into account that the gate contact metallization is one of the weakest points in AlGaN/GaN HEMTs, the reliability of Ni, Mo, Pt and refractory metal gates is crucial [4-6]. This work has been focused on the thermal stress and reliability assessment of AlGaN/GaN HEMTs. After an unbiased storage at 350 o C for 2000 hours, devices with Ni/Au gates exhibited detrimental IDS-VDS degradation in pulsed mode. In contrast, devices with Mo/Au gates showed no degradation after similar storage conditions. Further capacitance-voltage characterization as a function of temperature and frequency revealed two distinct trap-related effects in both kinds of devices. At low frequency (< 1MHz), increased capacitance near the threshold voltage was present at high temperatures and more pronounced for the Ni/Au gate HEMT and as the frequency is lower. Such an anomalous “bump” has been previously related to H-related surface polar charges [7]. This anomalous behavior in the C-V characteristics was also observed in Mo/Au gate HEMTs after 1000 h at a calculated channel temperatures of around from 250 o C (T2) up to 320 ºC (T4), under a DC bias (VDS= 25 V, IDS= 420 mA/mm) (DC-life test). The devices showed a higher “bump” as the channel temperature is higher (Fig. 1). At 1 MHz, the higher C-V curve slope of the Ni/Au gated HEMTs indicated higher trap density than Mo/Au metallization (Fig. 2). These results highlight that temperature is an acceleration factor in the device degradation, in good agreement with [3]. Interface state density analysis is being performed in order to estimate the trap density and activation energy.

Tras la producción del error: cómo el error en la epistemología se vincula a la arquitectura.

En la vida cotidiana, los errores no solo se reconocen, sino que también nos plantean nuevas situaciones. En la “filosofía de la ciencia” se han tratado como un factor determinante para la definición y la crítica de la propia ciencia. Se pretende que a través de la solución del “problema filosófico del error” de Víctor Brochard, y de algunos episodios claves de la epistemología, reconozcamos “el error” dentro de los procesos arquitectónicos como un factor crítico y productivo en sí mismo. ABSTRACT: In everyday life, errors are not only acknowledged, but they also expose us to new situations. In the field of philosophy of science, errors have been viewed as an important factor for determining and reviewing the definition of science itself. This article proposes that: through Victor Brochard´s solution of “the philosophical problem of error” and through some key aspects in epistemology, we will be able to determine that architectural “errors” can provide us with reflective and productive insights in architecture.

Respuesta hipofisaria y ovulatoria de conejas nulíparas alimentadas con dietas suplementadas con ácidos grasos poliinsaturados n-3.

Veinte conejas nulíparas se alimentaron ad libitum desde las 10 a las 16 semanas de edad con dos piensos isofibrosos, isoenergéticos e isoproteicos suplementados con dos fuentes de grasa diferentes: 0,75% de manteca para la dieta control (grupo C; n=10) ó 1,5% de un suplemento (Optomega-50; Optivite International Ltd., España) que contenía un 50% de extracto etérero y 38% de ácidos grasos poli-insaturados n-3 (AG n-3) para la dieta experimental (grupo P; n=10). A las 16 semanas de edad se determinó el consumo de pienso, así como la tasa de ovulación y las concentraciones plasmáticas de progesterona y LH a 0, 60 min, 5, 7 y 9 días post-inducción de ovulación con 20 μg de Gonadorelina (Inducel-GnRH, Lab. Ovejero). El consumo de pienso (150,5 g/d), el pico preovulatorio de LH (149,7±10,9 ng/ml), la tasa de ovulación (95%) y el número de cuerpos lúteos (9,8±0,7) fueron similares entre tratamientos. Las concentraciones plasmáticas de progesterona aumentaron a los 60 minutos (7,13±19 ng/ml) y 5 días (13,3±1,9 ng/ml) con respecto al día 0 (0,7±1,9 ng/ml; P<0.05), permaneciendo elevadas el día 9 en ambos grupos (19,4±1,9 ng/ml). Además, el día 5 y 7 post-inducción, las hembras alimentadas con la dieta P tendieron a tener niveles más elevados de progesterona en sangre que las alimentadas con la dieta C (16,6±1,9 vs.12,6±1,8 y 19,0±1,8 vs. 15,5±2,1 ng/ml, P=0,068 y P=0,082; respectivamente) que coinciden con el momento de la implantación embrionaria en esta especie. Por lo tanto, la suplementación con AG n-3 podría mejorar los niveles de progesterona en sangre y por lo tanto reducir la mortalidad embrionaria en este punto.

Critical radius for hot-jet ignition of hydrogen-air mixtures

This study addresses deflagration initiation of lean and stoichiometric hydrogen–air mixtures by the sudden discharge of a hot jet of their adiabatic combustion products. The objective is to compute the minimum jet radius required for ignition, a relevant quantity of interest for safety and technological applications. For sufficiently small discharge velocities, the numerical solution of the problem requires integration of the axisymmetric Navier–Stokes equations for chemically reacting ideal-gas mixtures, supplemented by standard descriptions of the molecular transport terms and a suitably reduced chemical-kinetic mechanism for the chemistry description. The computations provide the variation of the critical radius for hot-jet ignition with both the jet velocity and the equivalence ratio of the mixture, giving values that vary between a few tens microns to a few hundred microns in the range of conditions explored. For a given equivalence ratio, the critical radius is found to increase with increasing injection velocities, although the increase is only moderately large. On the other hand, for a given injection velocity, the smallest critical radius is found at stoichiometric conditions.

Tenacidade ao impacto e resistência a fadiga de aço API 5L X70 modificado ao Nb

O transporte de gás e derivados de petróleo é realizado pelo uso de tubulações, denominadas de oleodutos ou gasodutos, que necessitam de elevados níveis de resistência mecânica e corrosão, aliadas a uma boa tenacidade à fratura e resistência à fadiga. A adição de elementos de liga nesses aços, Ti, V e Nb entre outros, é realizada para o atendimento destes níveis de resistência após o processamento termomecânico das chapas para fabricação destes dutos, utilizando-se a norma API 5L do American Petroleum Institute, API, para a classificação destes aços. A adição de elementos de liga em associação com o processamento termomecânico visa o refino de grão da microestrutura austenítica, o qual é transferido para a estrutura ferrítica resultante. O Brasil é o detentor das maiores reservas mundiais de nióbio, que tem sido apresentado como refinador da microestrutura mais eficiente que outros elementos, como o V e Ti. Neste trabalho dois aços, denominados Normal e Alto Nb foram estudados. A norma API propõe que a soma das concentrações de Nióbio, Vanádio e Titânio devem ser menores que 0,15% no aço. As concentrações no aço contendo mais alto Nb é de 0,107%, contra 0,082% do aço de composição normal, ou seja, ambos atendem o valor especificado pela norma API. Entretanto, os aços são destinados ao uso em dutovias pela PETROBRÁS que impõe limites nos elementos microligantes para os aços aplicados em dutovias. Deste modo estudos foram desenvolvidos para verificar se os parâmetros de resistência à tração, ductilidade, tenacidade ao impacto e resistência à propagação de trinca por fadiga, estariam em acordo com a norma API 5L grau X70 e com os resultados que outros pesquisadores têm encontrado para aços dessa classe. Ainda, como para a formação de uma dutovia os tubos são unidos uns aos outros por processo de soldagem (circunferencial), o estudo de fadiga foi estendido para as regiões da solda e zona termicamente afetada (ZTA). Como conclusão final observa-se que o aço API 5L X70 com Nb modificado, produzido conforme processo desenvolvido pela ArcelorMittal - Tubarão, apresenta os parâmetros de resistência e ductilidade em tração, resistência ao impacto e resistência a propagação de trinca em fadiga (PTF) similar aos aços API 5L X70 com teores de Nb = 0,06 % peso e aqueles da literatura com teores de Nb+Ti+V < 0,15% peso. O metal base, metal de solda e zona termicamente afetada apresentaram curvas da/dN x ΔK similares, com os parâmetros do material C e m, da equação de Paris, respectivamente na faixa de 3,3 - 4,2 e 1.3x10-10 - 5.0x10-10 [(mm/ciclo)/(MPa.m1/2)m].

Forensic analysis of buildings affected by mining subsidence based on Differential Interferometry (Part III)

This work presents a forensic analysis of buildings affected by mining subsidence, which is based on deformation data obtained by Differential Interferometry (DInSAR). The proposed test site is La Union village (Murcia, SE Spain) where subsidence was triggered in an industrial area due to the collapse of abandoned underground mining labours occurred in 1998. In the first part of this work the study area was introduced, describing the spatial and temporal evolution of ground subsidence, through the elaboration of a cracks map on the buildings located within the affected area. In the second part, the evolution of the most significant cracks found in the most damaged buildings was monitored using biaxial extensometric units and inclinometers. This article describes the work performed in the third part, where DInSAR processing of satellite radar data, available between 1998 and 2008, has permitted to determine the spatial and temporal evolution of the deformation of all the buildings of the study area in a period when no continuous in situ instrumental data is available. Additionally, the comparison of these results with the forensic data gathered in the 2005–2008 period, reveal that there is a coincidence between damaged buildings, buildings where extensometers register significant movements of cracks, and buildings deformation estimated from radar data. As a result, it has been demonstrated that the integration of DInSAR data into forensic analysis methodologies contributes to improve significantly the assessment of the damages of buildings affected by mining subsidence.

Social determinants of self-perceived discrimination in Spain

Objectives: To analyse the association between self-perceived discrimination and social determinants (social class, gender, country of origin) in Spain, and further to describe contextual factors which contribute to self-perceived discrimination. Methods: Cross-sectional design using data from the Spanish National Health Survey (2006). The dependent variable was self-perceived discrimination, and independent and stratifying variables were sociodemographic characteristics (e.g. sex, social class, country of origin, educational level). Logistic regression was used. Results: The prevalence of self-perceived discrimination was 4.2% for men and 6.3% for women. The likelihood of self-perceived discrimination was higher in people who originated from low-income countries: men, odds ratio (OR) 5.59 [95% confidence interval (CI) 4.55–6.87]; women, OR 4.06 (95% CI 3.42–4.83). Women were more likely to report self-perceived discrimination by their partner at home than men [OR 8.35 (95% CI 4.70–14.84)]. The likelihood of self-perceived discrimination when seeking work was higher among people who originated from low-income countries than their Spanish counterparts: men, OR 13.65 (95% CI 9.62–19.35); women, OR 10.64 (95% CI 8.31–13.62). In comparison with Spaniards, male white-collar workers who originated from low-income countries [OR 11.93 (95% CI 8.26–17.23)] and female blue-collar workers who originated from low-income countries (OR 1.6 (95% CI 1.08–2.39)] reported higher levels of self-perceived discrimination. Conclusions: Self-perceived discrimination is distributed unevenly in Spain and interacts with social inequalities. This particularly affects women and immigrants.

Radar interferometry techniques for the study of ground subsidence phenomena: a review of practical issues through cases in Spain

Subsidence related to multiple natural and human-induced processes affects an increasing number of areas worldwide. Although this phenomenon may involve surface deformation with 3D displacement components, negative vertical movement, either progressive or episodic, tends to dominate. Over the last decades, differential SAR interferometry (DInSAR) has become a very useful remote sensing tool for accurately measuring the spatial and temporal evolution of surface displacements over broad areas. This work discusses the main advantages and limitations of addressing active subsidence phenomena by means of DInSAR techniques from an end-user point of view. Special attention is paid to the spatial and temporal resolution, the precision of the measurements, and the usefulness of the data. The presented analysis is focused on DInSAR results exploitation of various ground subsidence phenomena (groundwater withdrawal, soil compaction, mining subsidence, evaporite dissolution subsidence, and volcanic deformation) with different displacement patterns in a selection of subsidence areas in Spain. Finally, a cost comparative study is performed for the different techniques applied.

Medidas de protección de las víctimas de violencia de género según las desigualdades de género de la comunidad de residencia. ¿Una justicia inversa?

Antecedentes/Objetivos: La Ley de Protección Integral contra la Violencia de Género de 2004, se centra en una función de la Salud Pública: Proteger la salud. Su impacto debe notarse gradualmente. Objetivo: Analizar denuncias y mortalidad por violencia del compañero íntimo (VCI), y medidas judiciales de protección de las víctimas, según desigualdades de género de Comunidades Autónomas (CCAA) de España, 2006 y 2011. Métodos: Estudio ecológico de la relación del índice de desigualdad de género (IDG) de las CCAA con las variables dependientes: muertes y denuncias de mujeres por VCI, y frecuencia de medidas judiciales civiles (salida del domicilio, suspensión del régimen de visitas, suspensión guarda y custodia y prestación de alimentos) y penales (privativas de libertad, orden de alejamiento, prohibición de comunicación y suspensión tenencia y uso de armas) con/sin orden de protección (OP) por VCI (2006 y 2011). Fuentes: Observatorio Estatal de Violencia sobre la Mujer, INE, Informes Estadísticos anuales Poder Judicial. Agrupación de CCAA según IDG España en 2006: 0,104 y 2011: 0,082 (por encima: > desigualdad de género, por debajo: > igualdad). Cálculo de tasas de mortalidad de mujeres > 14 años y de denuncias para las CCAA con IDGalto y bajo, del coeficiente de determinación entre las variables dependientes y el IDG, y del riesgo de aplicación de medidas judiciales, con/sin OP, en las CCAA según su IDG. Contraste entre 2006 y 2011. Resultados: En España se realizaron 8.315.202 denuncias en 2006 y 11.417.799 en 2011 por VCI. A > desigualdad de género de las CCAA > riesgo de denunciar por VCI, en 2006: R2 = 34% (p = 0,01), y 2011: R2 = 27,9% (p = 0,03). No se detectan diferencias en el riesgo de morir por VCI de las mujeres que viven en CCAA con diferentes IDG; pero se observa una disminución de la pendiente de la recta en 2011, al aumentar las muertes en las CCAA con > igualdad de género y disminuir en las desiguales. En 2006, la probabilidad de todas las medidas civiles es probabilidad en las CCAA más igualitarias. Las OP acompañantes a las medidas civiles y penales son adoptadas con > probabilidad en las CCAA con más igualdad de género. Conclusiones: Paradójicamente, con el mayor número de denuncias en las CCAA con mayor desigualdad, la adopción de medidas judiciales penales y civiles, con y sin orden de protección de las víctimas de VCI, es menos frecuente.

Subsidence damage assessment of a Gothic church using differential interferometry and field data

The Santas Justa and Rufina Gothic church (fourteenth century) has suffered several physical, mechanical, chemical, and biochemical types of pathologies along its history: rock alveolization, efflorescence, biological activity, and capillary ascent of groundwater. However, during the last two decades, a new phenomenon has seriously affected the church: ground subsidence caused by aquifer overexploitation. Subsidence is a process that affects the whole Vega Baja of the Segura River basin and consists of gradual sinking in the ground surface caused by soil consolidation due to a pore pressure decrease. This phenomenon has been studied by differential synthetic aperture radar interferometry techniques, which illustrate settlements up to 100 mm for the 1993–2009 period for the whole Orihuela city. Although no differential synthetic aperture radar interferometry information is available for the church due to the loss of interferometric coherence, the spatial analysis of nearby deformation combined with fieldwork has advanced the current understanding on the mechanisms that affect the Santas Justa and Rufina church. These results show the potential interest and the limitations of using this remote sensing technique as a complementary tool for the forensic analysis of building structures.

Distribution of clay minerals in surface sediments of the Eurasian Arctic Ocean

Clay-mineral distributions in the Arctic Ocean and the adjacent Eurasian shelf areas are discussed to identify source areas and transport pathways of terrigenous material in the Arctic Ocean. The main clay minerals in Eurasian Arctic Ocean sediments are illite and chlorite. Smectite and kaolinite occur in minor amounts in these sediments, but show strong variations in the shelf areas. These two minerals are therefore reliable in reconstructions of source areas of sediments from the Eurasian Arctic. The Kara Sea and the western part of the Laptev Sea are enriched in smectite, with highest values of up to 70% in the deltas of the Ob and Yenisey rivers. Illite is the dominant clay mineral in all the investigated sediments except for parts of the Kara Sea. The highest concentrations with more than 70% illite occur in the East Siberian Sea and around Svalbard. Chlorite represents the clay mineral with lowest concentration changes in the Eastern Arctic, ranging between 10 and 25%. The main source areas for kaolinite in the Eurasian Arctic are Mesozoic sedimentary rocks on Franz-Josef Land islands. Based on clay-mineral data, transport of the clay fraction via sea ice is of minor importance for the modern sedimentary budget in the Arctic basins.