988 resultados para óleo-resina de copaíba
Resumo:
The germinative capacity of spores of Fusarium was studied in the presence of copahiba balsam (5 to 100%). The culture was carried out in Erlenmeyer flasks with 50ml of ICI medium and 1 ml of the pre-inoculated fungus. In some specific cases, 1 ml of copahiba balsam was added to the medium. The development of spores was significantly reduced in the presence of copahiba balsam. Sensibility to copahiba balsam varied with the different strains of Fusarium.
Resumo:
Adult leaves of Melissa officinalis L. (Lamiaceae) harvested during the time of budding had been used in the study of the leaf anatomy in the identification of the secretory structures. The material was fixed in FAA 50%, dehydrated in alcoholic series (ethyl), infiltrated in paraffin, sectioned at 13 mm, staining and later analyzed through optic microscopy. Also it was carried through a study in gaseous chromatography for attainment of the rude essential oil. Analyses of transversal sections of the leaf of Melissa officinalis, has identified the presence of two types of trichomes secretory: peltate and capitate, beyond the presence of trichome tector. Trichome capitate, identified in literature as (type I), presents variations in its morphology in relation to the cells number stalk and the head secretory cells number. The chromatographic analysis of the essential oil identified the presence of monoterpenes, in two major components, responsible for more than 87.8% of the relative composition in the rude oil, beyond sesquiterpenes in smaller proportions.
Resumo:
The objective of the work was to accomplish an anatomical and ultrastructural study of mature leaf of Cymbopogon citratus (Poaceae) and analyze the essential oil through Gas Chromatography (GC). For the anatomical study, the material was fixed in FAA, followed bytheethyl dehydration and infiltration of the material in synthetic resin. For the ultrastructural study, the material was fixed and Kamovsky, dehydrated in acetone, dried to the critical point and metallized. For the analysis in GC, the essential oil it was obtained by steam distillation of leaves and analyzed by Gas Chromatography. Through the anatomical study it was observed that the faces of mesophyll are distinctly, the bulliform cells occupy the adaxial surface of the leaf and in the medium region are situated the biggest vascular bundles involved by sclerenchymatous hem with extensions reaching both epidermis. Between the biggest vascular bundles are observed three to five small vascular bundles, linkage only in the abaxial epidermis. Shortly, pointed and unicellular structures, called prickle-hair, had been observed inserted above the veins and micro-hair, that they consist of a long basal cell and an oval distal cell, that are located between the regions of vascular bundles. The chromatogram sample shows that the analyzed essential oil presented three majority components, responsible for 87% of the relative composition of the oil. These components are monoterpenos, justifying the strong smell of the essential oil.
Resumo:
The essential oils are found in a great number of Lamiaceae family species, but few researches were carried out on this subject. This work had as a goal to identify the Leonurus sibiricus L. (rubim) essential oil composition. Rubim leaves and flowers in infusion are able to avoid vomit, diarrhea, and are also indicated in cold, cough, bronchitis and rheumatisms cases. In order to know what are the phytochemical compositions involved, it was used the gas chromatography techniques with mass spectrometry (GC-MS) as methodology. The results showed 70% volatility compound by trans-cariophylene, alpha-humulene and germacrene-D. Other substances like gamacadinene, beta-bourborene and alpha-copaene were found like compounds of this essential oil species.
Resumo:
This study aimed to evaluate the effect of different plant growth regulators on essential oil yield in Salvia officinalis L. plants. The experiment was held in a greenhouse and the experimental design was completely randomized, with 5 treatments and three replications. The Treatments consisted in the application of gibberellic acid (GA3), benzylaminopurine (BAP), 2-chloroethyl phosphonic acid (ethephon), and Stimulate at 2%, compared with control plants (water). Applications of plant growth regulators were performed in three consecutive periods, in turn, 15, 25 and 35 days after transplanting of seeding germinating in the light at 25°C. The dry mass yield of the aerial part and the oil essential content were determined 131 days after the transplant. The aerial part of the plants was dried in an oven at 35°C; after dry mass determination, the oil was extracted by hydrodistillation and its volume was determined. Plants treated with GA 3 and Stimulate showed increase in essential oil content, while plants treated with BAP and ethephon showed decrease in essential oil volume when compared with the control plants.
Resumo:
The objective of this study was to evaluate the dynamic performance of an agricultural tractor utilizing distilled biodiesel (50% ethylic + 50% methylic) as a function of the proportion of biodiesel and diesel of petroleum (0 and 100%, 5 and 95%, 15 and 85%, 25 and 75%, 50 and 50%, 75 and 25% and 100 and 0%), respectively. This research was done in the area of the Department of Rural Engineering of the Paulista State University (UNESP), Jaboticabal Campus, SP, located in the latitude 21° 14′ 28″ S and longitude 48° 17′12″ W. A tractor 4 x 2 FWA was used, with a 73.6 kW (100 HP) motor and a ballast tractor. The biodiesel used was produced from spent oil from food frying. The experimental design was entirely randomized, with 7 treatments and 5 repetitions, totaling 35 observations. The results showed that the biodiesel and diesel blend significantly influenced the hourly volumetric consumption, hourly mass consumption, fuel consumption per worked area and specific fuel consumption variables. When the tractor operated with 100% of biodiesel (B100) the specific fuel consumption increased 18% on average in relation to diesel (B0).
Resumo:
Objective: To assess the effect of bleaching agents on the microhardness of nanoparticle resin composite. Methods: Twenty-eight cylindrical test specimens (8× 1mm) of Filtek™ Supreme XT resin (3M/ESPE) were prepared and divided into 5 groups. The initial Vickers microhardness was measured (load of 50 grams force for 30 seconds) on the top surface of the test specimens. The groups were treated and divided as follows: G1 - artificial saliva (21 days - control); G2 - 7% hydrogen peroxide gel applied for 4h/day, for 14 days; G3 - 10% carbamide peroxide for 4h/day, for 14 days: G4 - 35% hydrogen peroxide gel applied in three sessions of 30 minutes each, with an interval of one week (21 days) between the sessions; G5 - 35% carbamide peroxide, three sessions of 30 minutes each, with an interval of one week (21 days) between the sessions. The top surfaces of the test specimens received treatment and were submitted to the Vickers microhardness test. Results: The results obtained were submitted to the Analysis of Variance at a fixed criterion, at a level of significance of p=0.05. No significant differences were observed among the treatments tested (p=0.42) when compared with G1. Significant differences (Tukey test) were found when the initial microhardness values were compared with the values after experimental treatments (p<0.01). Conclusion: The application of bleaching agents did not alter the microhardness of resin composites. Therefore, there is no need to change restorations after bleaching.
Resumo:
Objective: To study the influence of color opacity and light-curing systems (halogen light vs blue LED) on the microhardness of a composite resin. Methods: Esthet-X composite resin (Dentsply), shades A2 and A2-O, was inserted in a stainless steel matrix (5 mm diameter and 2 mm deep) and was light cured for 40 seconds with a halogen light source (XL 3000; 3M/ESPE) or a blue LED (Optilight LD II; Gnatus). Eight groups of 15 specimens each were formed, and were further divided according to the light-curing systems, the exposed area (base and surface), and the opacity of the composite resin, producing 120 specimens. The specimens were next stored in distilled water for 24 hours, embedded in a chemically activated acrylic resin, then subjected to finishing and polishing with sandpaper and felt discs. Microhardness was measured with a Vickers Digital Microhardness meter, with a 50 g load for 30 seconds. The obtained microhardness means were analyzed by ANOVA and Tukey's multiple-comparison test at 5% significance level. Results: The surface microhardness was always greater than the base microhardness, regardless of the light-curing source. The halogen light lamp produced significantly higher composite resin microhardness means than the blue LED (57.61 vs. 42.53 HV) (p<0.05). Statistically significant differences (p<0.05) were obtained between the microhardness means for the different composite opacities; lowest microhardness in depth was produced by the A2-O shade. Conclusion: Composite resin opacity as well as the light-curing system influenced the microhardness of the material.
Resumo:
INTRODUCTION: Microsporum canis is the most common cause of canine and feline dermatophytosis and thus has an important zoonotic role. OBJECTIVES: the aim of this study was to determine the antifungal action of medicinal plant extracts and of eucalyptus oil against pathogenic fungus Microsporum canis. METHODS: the extracts were prepared by mixing 300 g of previously washed leaves with 450 mL of distilled water. Then the material was triturated, filtered, sterilized and conserved at 10 + 2 oC. Fifteen milliliters of sterilized medium Sabouraud dextrose (Difco) at a temperature of 55 + 1 oC was added in Petri dishes containing the extracts in one, two, three, four and five mm concentrations. The fungus was inoculated once the medium was solidified. The inoculated dishes were maintained in B.O.D. incubator at 36 ± 0,5 oC until the fungus developed in the controls. RESULTS: the extracts from Punica granatum, Mangifera indica and Eucalyptus spp reduced the growth of fungus, but the extracts from Cymgopogom nardus, Tagetes minuta, Ruta graviolens, Cyperus rotundus, Annona moricata and Calendula spp leaves and flowers boosted the growth of fungus. The other extracts and the eucalyptus oil neither show any fungicidal action nor encourage mycelium growth. CONCLUSIONS: the use of most tested extracts and eucalyptus oil is not suitable for the treatment of Microsporum canis dermatophytosis due to lack of inhibitory effects. The extracts from Cymgopogom nardus, Tagetes minuta, Ruta graviolens, Cyperus rotundus, Annona moricata and from of Calendula spp leaves and flowers help the development of the fungus making clear that phytotherapy should be properly used, otherwise it can worsen the problem. However; extracts from Mangifera indica, Punica granatum and Eucalyptus spp. can be used as fungistatic.
Resumo:
This work was carried out with the objective to evaluate the effect of different carbohydrate sources associated with sunflower oil on performance, carcass characteristics and cuts yields of feedlot sheep. Twenty four lambs were assigned to a completely randomized design with a 2 × 2 factorial arrangement with two sources of neutral detergent soluble carbohydrate, starch or neutral detergent soluble fiber, with and without the inclusion of 4.2% sunflower oil. The treatments consisted of diets containing high content of soluble fiber (17.14% DM) without adding oil, high in soluble fiber (16.35% DM) with inclusion of 4.2% sunflower oil, high starch (30.14% DM) without adding oil and high starch (28.21% DM) with addition of 4.2% of sunflower oil. The animals were feedlot with average initial of 17.7 kg and when reached 35 kg body weight were slaughtered. The different sources of carbohydrate and oil inclusion in the diet not influence the days on feedlot in the dry matter intake and average daily weight gain, but higher feed conversion was observed for the diet with a high percentage of neutral detergent soluble fiber compared to diet high in starch. The carcass weights and yields as well as the commercial cuts were not affected by diets. The performance and quantitative characteristics and carcass cuts of lamb are not affected by different carbohydrate sources and their association with 4.2% sunflower oil.
Resumo:
Pós-graduação em Agronomia (Agricultura) - FCA
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Biologia Animal - IBILCE
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)