The Impact of Industry Collaboration on Academic Research Output: A Dynamic Panel Data Analysis

The aim of this paper is to analyse the impact of university knowledge and technology transfer activities on academic research output. Specifically, we study whether researchers with collaborative links with the private sector publish less than their peers without such links, once controlling for other sources of heterogeneity. We report findings from a longitudinal dataset on researchers from two engineering departments in the UK between 1985 until 2006. Our results indicate that researchers with industrial links publish significantly more than their peers. Academic productivity, though, is higher for low levels of industry involvement as compared to high levels.

Research Highlights, August 2006

Provide an outstanding educational program that enables our graduates to become leaders in their professions by imparting fundamental principles, skills, and tools to innovate and excel. Pursue the discovery of fundamental knowledge and its applications to position the department among the leaders in research. Respond to the needs of the State of Iowa and the nation by building a strong outreach program that serves industry and the engineering profession.

Research Highlights, August 2004

Provide an outstanding educational program that enables our graduates to become leaders in their professions by imparting fundamental principles, skills, and tools to innovate and excel. Pursue the discovery of fundamental knowledge and its applications to position the department among the leaders in research. Respond to the needs of the State of Iowa and the nation by building a strong outreach program that serves industry and the engineering profession.

Nursing staff sizing in the emergency room of a university hospital

OBJECTIVE To verify the adequacy of the professional nursing staff in the emergency room of a university hospital and to evaluate the association between categories of risk classification triage with the Fugulin Patient Classification System. METHOD The classification of patients admitted into the emergency room was performed for 30 consecutive days through the methodology proposed by Gaidzinski for calculating nursing requirements. RESULTS The calculation determines the need for three registered nurses and four non-registered nursing for each six hour shift. However, only one registered nurse and four non-registered nurse were available per shift. There was no correlation between triage risk classification and classification of care by the Fugulin Patient Classification System. CONCLUSION A deficit in professional staff was identified in the emergency room. The specificity of this unit made it difficult to measure. To find the best strategy to do so, further studies should be performed.

PhD Students’ Research Group Social Capital in Two Countries: A Clustering Approach with Duocentred Network Measures

The article examines the structure of the collaboration networks of research groups where Slovenian and Spanish PhD students are pursuing their doctorate. The units of analysis are student-supervisor dyads. We use duocentred networks, a novel network structure appropriate for networks which are centred around a dyad. A cluster analysis reveals three typical clusters of research groups. Those which are large and belong to several institutions are labelled under a bridging social capital label. Those which are small, centred in a single institution but have high cohesion are labelled as bonding social capital. Those which are small and with low cohesion are called weak social capital groups. Academic performance of both PhD students and supervisors are highest in bridging groups and lowest in weak groups. Other variables are also found to differ according to the type of research group. At the end, some recommendations regarding academic and research policy are drawn

Welfare Impacts of Cross-Country Spillovers in Agricultural Research, 2007

The welfare implications of intellectual property protection (IPP) for private sector agricultural research are analyzed, focusing on the realistic cases in which countries provide different IPP levels, technology spills over across countries, and the public sector is involved in research. A model is developed to determine who benefits from, and who should pay for, the associated research. The paper contains some interesting results on the implications of a harmonization of IPP policies through multilateral agreements or via technology that allows research firms to prevent the copying of plants and animals that express traits that have emerged from their research.

The Soil and Water Assessment Tool:Historical Development, Applications, and Future Research Directions, 2007

The Soil and Water Assessment Tool (SWAT) model is a continuation of nearly 30 years of modeling efforts conducted by the U.S. Department of Agriculture (USDA), Agricultural Research Service. SWAT has gained international acceptance as a robust interdisciplinary watershed modeling tool, as evidenced by international SWAT conferences, hundreds of SWAT-related papers presented at numerous scientific meetings, and dozens of articles published in peer-reviewed journals. The model has also been adopted as part of the U.S. Environmental Protection Agency’s BASINS (Better Assessment Science Integrating Point & Nonpoint Sources) software package and is being used by many U.S. federal and state agencies, including the USDA within the Conservation Effects Assessment Project. At present, over 250 peer-reviewed, published articles have been identified that report SWAT applications, reviews of SWAT components, or other research that includes SWAT. Many of these peer-reviewed articles are summarized here according to relevant application categories such as streamflow calibration and related hydrologic analyses, climate change impacts on hydrology, pollutant load assessments, comparisons with other models, and sensitivity analyses and calibration techniques. Strengths and weaknesses of the model are presented, and recommended research needs for SWAT are provided.

Monitoring the university admissions process in Spain

The examinations taken by high-school graduates in Spain and the role ofthe examination in the university admissions process are described. Thefollowing issues arising in the assessment of the process are discussed:reliability of grading, comparability of the grades and scores(equating),maintenance of standards, and compilation and use of the grading process,and their integration in the operational grading are proposed. Variousschemes for score adjustment are reviewed and feasibility of theirimplementation discussed. The advantages of pretesting of items and ofempirical checks of experts' judgements are pointed out. The paperconcludes with an outline of a planned reorganisation of the highereducation in Spain, and with a call for a comprehensive programme ofempirical research concurrent with the operation of the examination andscoring system.

Annual Report of Iowa Highway Research Board Research and Development Activities FY 08

RESEARCH AND DEVELOPMENT The Highway Division of the Iowa Department of Transportation (Iowa DOT) engages in research and development for two reasons: first, to find workable solutions to the many problems that require more than ordinary, routine investigation; second, to identify and implement improved engineering and management practices. This report, entitled "Iowa Highway Research Board Research and Development Activities FY2008" is submitted in compliance with Sections 310.36 and 3 I2.3A, Code of Iowa, which direct the submission of a report of the Secondary Road Research Fund and the Street Research Fund respectively. It is a report of the status of research and development projects in progress on June 30, 2008; it is also a report on projects completed during the fiscal year beginning July 1, 2007, and ending June 30, 2008. Detailed information on each of the research and development projects mentioned in this report is available in the Research and Technology Bureau in the Highway Division of the Iowa Department of Transportation. IOWA HIGHWAY RESEARCH BOARD In developing a progressive, continuing and coordinated program of research and development, the Highway Division is assisted by the Iowa Highway Research Board. This advisory group was established in 1949 by the Iowa State Highway Commission to respond to the research denoted in Section 310.36 of the Code of Iowa and now is denoted by 312.3A. The Research Board consists of 15 regular members: seven Iowa county engineers, four Iowa DOT engineers, one representative from Iowa State University, one from The University of Iowa, and two engineers employed by Iowa municipalities. Each regular member may have an alternate who will serve at the request of the regular member. The regular members and their alternates are appointed for a three-year term. The membership of the Research Board as of June 30, 2008, is listed in Table I. The Research Board held nine regular meetings during the period ofJuly 1, 2007, to June 30, 2008. Suggestions for research and development were reviewed at these meetings and recommendations were made by the Board.

Theimpact of industry collaboration on research: Evidence from engineering academics in the UK

We study the impact of university-industry research collaborations on academicoutput, in terms of productivity and direction of research. We report findings froma longitudinal dataset on all the researchers from the engineering departments inthe UK in the last 20 years. We control for the endogeneity caused by the dynamicnature of research and the existence of reverse causality. Our results indicate thatresearchers with industrial links publish significantly more. Productivity, though,is higher for low levels of industry involvement. Moreover, growing ties with theindustry skew research towards a more applied approach.

Endogeneous matching in university-industry collaboration: Theory and empirical evidence from the UK

We develop a two-sided matching model to analyze collaboration between heterogeneousacademics and firms. We predict a positive assortative matching in terms of both scientificability and affinity for type of research, but negative assortative in terms of ability on one sideand affinity in the other. In addition, the most able and most applied academics and the mostable and most basic firms shall collaborate rather than stay independent. Our predictionsreceive strong support from the analysis of the teams of academics and firms that proposeresearch projects to the UK's Engineering and Physical Sciences Research Council.

Annual Report of Iowa Highway Research Board Research and Development Activities 2007

RESEARCH AND DEVELOPMENT The Highway Division of the Iowa Department of Transportation (Iowa DOT) engages in research and development for two reasons: first, to find workable solutions to the many problems that require more than ordinary, routine investigation; second, to identify and implement improved engineering and management practices. This report, entitled "Iowa Highway Research Board Research and Development Activities FY2008" is submitted in compliance with Sections 310.36 and 3 I2.3A, Code of Iowa, which direct the submission of a report of the Secondary Road Research Fund and the Street Research Fund respectively. It is a report of the status of research and development projects in progress on June 30, 2008; it is also a report on projects completed during the fiscal year beginning July 1, 2007, and ending June 30, 2008. Detailed information on each of the research and development projects mentioned in this report is available in the Research and Technology Bureau in the Highway Division of the Iowa Department of Transportation. IOWA HIGHWAY RESEARCH BOARD In developing a progressive, continuing and coordinated program of research and development, the Highway Division is assisted by the Iowa Highway Research Board. This advisory group was established in 1949 by the Iowa State Highway Commission to respond to the research denoted in Section 310.36 of the Code of Iowa and now is denoted by 312.3A. The Research Board consists of 15 regular members: seven Iowa county engineers, four Iowa DOT engineers, one representative from Iowa State University, one from The University of Iowa, and two engineers employed by Iowa municipalities. Each regular member may have an alternate who will serve at the request of the regular member. The regular members and their alternates are appointed for a three-year term. The membership of the Research Board as of June 30, 2008, is listed in Table I. The Research Board held nine regular meetings during the period ofJuly 1, 2007, to June 30, 2008. Suggestions for research and development were reviewed at these meetings and recommendations were made by the Board.

Electronic thesis and dissertations conference, University of Pittsburgh, 10-12 de junio de 2009

El pasado mes de junio se celebró en Pittsburgh, EE.UU., el duodécimo simposio internacional sobre tesis electrónicas: Electronic Thesis and Dissertations Conference (ETD2009). Fue organizado por Networked Digital Library of Theses and Dissertations (NDLTD). La mayoría de los ponentes explicaron las experiencias de su propia universidad. Además, hubo expertos invitados entre los cuales se pueden destacar Stevan Harnad (Univ. Southampton), Karla Hahn (Association of Research Libraries) y Deanna Marcum (Library of Congress). Estos simposios pretenden promover la adopción, creación, uso, difusión y preservación de las tesis electrónicas. De hecho, el éxito ha sido tal, que algunas universidades ya prescinden de la copia en papel para el depósito y preservación del documento. Un caso reciente es el de la University of Albany cuya nueva política, anunciada durante el simposio, consiste en que a partir de setiembre del 2009 ya no requiere el depósito de una copia impresa de las tesis aprobadas en aquella universidad.

Management of nanomaterials safety in research environment

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting innovation and discoveries by ensuring them a safe environment even in the case of very novel products. The proposed measures are not considered as constraints but as a support to their research. This methodology is being implemented at the Ecole Polytechnique de Lausanne in over 100 research labs dealing with nanomaterials. It is our opinion that it would be useful to other research and academia institutions as well. [Authors]